MPZ1608S471AT [TDK]
Ferrite Chip, 1 Function(s), 1A, EIA STD PACKAGE SIZE 0603, 2 PIN;型号: | MPZ1608S471AT |
厂家: | TDK ELECTRONICS |
描述: | Ferrite Chip, 1 Function(s), 1A, EIA STD PACKAGE SIZE 0603, 2 PIN |
文件: | 总23页 (文件大小:216K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
E M C C o m p o n e n t s
July 2013
Chip Beads
For power line
MPZseries
MPZ0603
MPZ1005
MPZ1608
MPZ2012
0603[0201 inch]*
1005[0402 inch]
1608[0603 inch]
2012[0805 inch]
* Dimensions Code JIS[EIA]
(2/23)
E M C C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20130723 / e9413_mpz.
(3/23)
E M C C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip Beads
For power line
Compatible with lead-free solders
Overview of the MPZ Series
FEATURES
Noise reduction solution for power supply lines.
Compared to the conventional MMZ Series, has low direct current resistance for compatibility with large currents, optimal for low power
consumption.
Lineup includes 4 sizes from 0603 to 2012.
Achieves various frequency characteristics by using 5 materials with different features.
Multilayer integration monolithic structure makes it highly reliable.
There is no directivity.
APPLICATION
Smart phones, tablets, portable memory audio devices, various modules, PCs, note PCs, TVs, STBs, Blu-ray recorders, DSCs, and
DVCs
Power supply line noise removal for game machines, smart grids, industrial equipment, etc.
PART NUMBER CONSTRUCTION
MPZ
0603
S
220
C
T
□□□
L×W×T Dimensions
(mm)
Impedance
(ꢂ) at 100MHz
Characteristic
Series name
Material name
Packaging style
Internal code
type
0603
1005
0.6×0.3x0.3
1.0×0.5x0.5
1.6×0.8x0.6
1.6×0.8x0.8
2.0×1.25x0.85
S
Y
B
R
D
220
22
C
A
B
T
Taping
1608
2012
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
ꢀ
ꢀꢀ
(°C)
(°C)
(pieces/reel)
15,000
(mg)
MPZ0603
MPZ1005
–55 to +125
–40 to +85
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–40 to +85
–55 to +125
–55 to +125
–55 to +125
0.3
1
10,000
4,000
4,000
4,000
t=0.6mm
t=0.8mm
MPZ2012
3
4
8
MPZ1608
ꢀꢁ
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
ꢀꢀꢁ
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(4/23)
E M C C o m p o n e n t s
Overview of the MPZ Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(5/23)
E M C C o m p o n e n t s
Overview of the MPZ Series
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics.
For digital signal line applications calling requiring good waveform integrity. Impedance values selected for effectiveness at 10
to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core.
For signal line applications in which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to
300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICSꢀ
2500
D
2000
Y
1500
1000
S
R
500
0
B
10
100
1000
Frequency(MHz)
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(6/23)
E M C C o m p o n e n t s
MPZ series
MPZ0603 Type
SHAPE & DIMENSIONS
0.6 0.03
0.1min.
Dimensions in mm
RECOMMENDED LAND PATTERN
0.25
0.30
0.25
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(7/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ0603 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
[100MHz]
Rated current
(mA)max.
Part No.
(ꢂ)max.
(ꢂ)
22
Tolerance
25%
0.065
0.090
0.120
1000
750
500
MPZ0603S220CT□□□
MPZ0603S330CT□□□
MPZ0603S470CT□□□
33
25%
47
25%
○ Measurement equipment
Measurement item
Impedance
Product No.
E4991A+16197
Type-7556
Manufacturer
Agilent Technologies
Yokogawa
DC resistance
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(8/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ0603 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ0603S SERIES
100
90
MPZ0603S470C
80
70
60
MPZ0603S330C
50
40
30
20
MPZ0603S220C
10
0
1
10
100
1000
)
10000
(
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(9/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ0603 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ0603S220C
MPZ0603S330C
MPZ0603S470C
70
60
50
40
30
20
10
0
45
40
35
30
25
20
15
10
5
100
80
60
40
20
0
Z
Z
Z
R
R
R
(
X
X
X
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
Frequency MHz
(
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(10/23)
E M C C o m p o n e n t s
MPZ series
MPZ1005 Type
SHAPE & DIMENSIONS
1 0.05
0.1min.
Dimensions in mm
RECOMMENDED LAND PATTERN
0.5
0.4
0.5
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(11/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1005 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
[100MHz]
Rated current
(A)max.
Part No.
(ꢂ)max.
(ꢂ)
10
Tolerance
5ꢂ
0.025
0.035
0.060
0.090
0.100
2.0
1.7
1.5
1.2
1.2
MPZ1005S100CT□□□
MPZ1005S300CT□□□
MPZ1005S600CT□□□
MPZ1005S121CT□□□
MPZ1005Y900CT□□□
30
10ꢂ
60
25%
120
90
25%
25%
○ Measurement equipment
Measurement item
Impedance
Product No.
E4991A+16192A
Type-7556
Manufacturer
Agilent Technologies
Yokogawa
DC resistance
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(12/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1005 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1005S SERIES
MPZ1005Y SERIES
250
200
150
100
50
250
MPZ1005Y900C
200
MPZ1005S121C
MPZ1005S600C
MPZ1005S300C
150
MPZ1005S100C
100
50
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(13/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1005 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1005S100C
MPZ1005S300C
MPZ1005S600C
18
16
14
12
10
8
6
4
2
0
50
40
30
20
10
0
100
80
60
40
20
0
Z
Z
Z
R
R
R
X
X
X
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
(
)
(
)
(
)
Frequency MHz
Frequency MHz
Frequency MHz
MPZ1005S121C
MPZ1005Y900C
200
250
200
150
100
50
Z
150
100
50
Z
R
R
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(14/23)
E M C C o m p o n e n t s
MPZ series
MPZ1608 Type
SHAPE & DIMENSIONS
1.6 0.15
( )
Thickness T
0.6 0.15mm
0.8 0.15mm
Dimensions in mm
0.3 0.2
RECOMMENDED LAND PATTERN
Dimensions in mm
0.6
0.8
0.6
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(15/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
[100MHz]
Rated currentꢀ
(A)max.
Thickness T
(mm)
Part No.
(ꢂ)max.
(ꢂ)
470
26
30
Tolerance
25%
25%
10ꢂ
0.150
0.007
0.010
0.020
0.030
0.045
0.050
0.050
0.080
0.150
0.150
0.300
0.120
0.030
0.040
0.050
0.100
0.060
0.100
0.150
1.0
6.0
5.0
3.5
3.0
2.0
2.0
2.2
1.7
1.0
1.0
0.8
1.2
2.3
2.0
1.8
1.5
1.8
1.2
1.0
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
MPZ1608B471AT□□□
MPZ1608S260AT□□□
MPZ1608S300AT□□□
MPZ1608S600AT□□□
MPZ1608S101AT□□□
MPZ1608S121AT□□□
MPZ1608S181AT□□□
MPZ1608S221AT□□□
MPZ1608S331AT□□□
MPZ1608S471AT□□□
MPZ1608S601AT□□□
MPZ1608S102AT□□□
MPZ1608R391AT□□□
MPZ1608Y600BT□□□
MPZ1608Y101BT□□□
MPZ1608Y151BT□□□
MPZ1608Y221BT□□□
MPZ1608D300BT□□□
MPZ1608D600BT□□□
MPZ1608D101BT□□□
60
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
10ꢂ
100
120
180
220
330
470
600
1000
390
60
100
150
220
30
60
100
ꢀ
25%
25%
Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (derating) about the rating current at 85°C or more in
temperature of the product.
○ Measurement equipment
Measurement item
Product No.
Manufacturer
Impedance
DC resistance
E4991A+16192A
Type-7556
Agilent Technologies
Yokogawa
* Equivalent measurement equipment may be used.
○ Rated current vs. temperature characteristics (derating)
7
6
5
4
3
2
1
0
–55 –35 –15
5
25
45
65
85 105 125
(
)
Temperature °C
S260A
Y600B
Y151B,D300B
S300A
S221A
S331A
S600A
S121A,S181A,Y101B
Y221B
S101A
R391A,D600B
S102A
B471A,S471A,S601A,D101B
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(16/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ1608B SERIES
MPZ1608S SERIES
MPZ1608R SERIES
1200
1000
900
800
700
600
500
400
300
200
100
0
500
500
MPZ1608S102A
MPZ1608S331A
MPZ1608S221A
MPZ1608S181A
MPZ1608S121A
MPZ1608S101A
MPZ1608S600A
MPZ1608S260A
MPZ1608S300A
MPZ1608B471A
MPZ1608R391A
MPZ1608S601A
MPZ1608S471A
400
300
200
100
0
400
300
200
100
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
(
Frequency MHz
Frequency MHz
MPZ1608Y SERIES
MPZ1608D SERIES
350
600
MPZ1608D101B
MPZ1608Y221B
300
250
200
150
100
50
500
400
300
200
100
0
MPZ1608Y151B
MPZ1608Y101B
MPZ1608D600B
MPZ1608Y600B
MPZ1608D300B
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(17/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608B471A
MPZ1608S260A
MPZ1608S300A
500
400
40
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
Z
300
200
100
0
Z
Z
R
R
R
X
X
X
0
0
1
10
100
1000
)
10000
10000
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
MPZ1608S600A
MPZ1608S101A
MPZ1608S121A
100
80
60
40
20
0
160
140
120
100
80
60
40
20
0
200
150
100
50
Z
Z
Z
R
R
R
X
X
X
0
1
10
100
1000
)
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
Frequency MHz
(
Frequency MHz
MPZ1608S181A
MPZ1608S221A
MPZ1608S331A
300
250
200
150
100
50
300
250
200
150
100
50
450
400
350
300
250
200
150
100
50
Z
Z
Z
R
R
R
X
X
X
0
0
0
1
10
100
1000
)
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
(
Frequency MHz
Frequency MHz
Frequency MHz
MPZ1608S471A
MPZ1608S601A
MPZ1608S102A
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
R
R
Z
R
X
X
X
1
10
100
(
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
Frequency MHz
MPZ1608R391A
MPZ1608Y600B
MPZ1608Y101B
500
400
300
200
100
0
140
120
100
80
200
150
100
50
Z
Z
Z
R
R
R
60
40
20
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
(
(
Frequency MHz
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(18/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ1608 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ1608Y151B
MPZ1608Y221B
MPZ1608D300B
300
250
200
150
100
50
350
300
250
200
150
100
50
250
200
150
100
50
Z
Z
R
Z
R
R
X
X
X
0
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
(
Frequency MHz
Frequency MHz
MPZ1608D600B
MPZ1608D101B
600
500
400
300
200
100
0
350
300
250
200
150
100
50
Z
Z
X
R
R
100
X
0
1
10
1000
)
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(19/23)
E M C C o m p o n e n t s
MPZ series
MPZ2012 Type
SHAPE & DIMENSIONS
2.0 0.2
0.5 0.3
Dimensions in mm
RECOMMENDED LAND PATTERN
0.8
1
0.8
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(20/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ2012 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
[100MHz]
Rated currentꢀ
(A)max.
Part No.
(ꢂ)max.
(ꢂ)
30
Tolerance
10ꢂ
25%
25%
25%
0.010
0.020
0.040
0.050
0.100
0.150
6
4
3
2.5
2
MPZ2012S300AT□□□
MPZ2012S101AT□□□
MPZ2012S221AT□□□
MPZ2012S331AT□□□
MPZ2012S601AT□□□
MPZ2012S102AT□□□
100
220
330
600
1000
ꢀ
25%
25%
1.5
Please refer to the graph of RATED CURRENT vs. TEMPERATURE CHARACTERISTICS (derating) about the rating current at 85°C or more in
temperature of the product.
○ Measurement equipment
Measurement item
Product No.
Manufacturer
Impedance
DC resistance
E4991A+16192A
Type-7556
Agilent Technologies
Yokogawa
* Equivalent measurement equipment may be used.
○ Rated current vs. temperature characteristics (derating)
7
S300A
6
5
S101A
4
S221A
3
S331A
S601A
S102A
2
1
0
–55 –35 –15
5
25
45
65
85 105 125
(
)
Temperature °C
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(21/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ2012 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MPZ2012S SERIES
1200
1100
MPZ2012S221A
MPZ2012S102A
1000
MPZ2012S101A
900
MPZ2012S300A
MPZ2012S601A
800
MPZ2012S331A
700
600
500
400
300
200
100
0
1
10
100
1000
)
10000
(
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(22/23)
E M C C o m p o n e n t s
MPZ seriesꢀ
MPZ2012 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MPZ2012S300A
MPZ2012S101A
MPZ2012S221A
50
40
30
20
10
0
140
120
100
80
300
250
200
150
100
50
Z
Z
Z
R
R
60
R
40
20
X
X
X
0
0
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
1
10
100
1000
)
10000
(
(
Frequency MHz
Frequency MHz
MPZ2012S331A
MPZ2012S601A
MPZ2012S102A
400
350
300
250
200
150
100
50
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
Z
R
R
R
X
X
X
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
(
)
(
)
(
)
Frequency MHz
Frequency MHz
Frequency MHz
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
(23/23)
E M C C o m p o n e n t s
MPZ series
Packaging style
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
8.4
–0.0
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
1.50+0.1
2.0 0.05
4.0 0.1
A
P1
K
Dimensions in mm
P1 K
Type
A
B
MPZ0603
MPZ1005
MPZ1608
MPZ2012
0.38 0.05
0.65 0.1
1.1 0.2
1.5 0.2
0.68 0.05
1.15 0.1
1.9 0.2
2.3 0.2
2.0 0.05
2.0 0.05
4.0 0.1
4.0 0.1
0.5max.
0.8max.
1.1max.
1.1max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20130723 / e9413_mpz.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明