首页 |元器件品牌

PFC3819QM-181K09B-00 [TDK]

General Purpose Inductor, 180uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT;
PFC3819QM-181K09B-00
型号： PFC3819QM-181K09B-00
厂家： TDK ELECTRONICS    TDK ELECTRONICS
描述：

General Purpose Inductor, 180uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT

大电流电感器 测试 功率因数校正
文件： 总19页 (文件大小：629K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
January 2014  
Choke Coils for PFC  
Pin terminal type  
PFC  
series  
PFC3514QM  
PFC3318QM  
PFC3519QM  
PFC3819QM  
PFC4124QM  
PFC2723ER  
PFC3125ER  
PFC3525ER  
(2/19)  
REMINDERS FOR USING THESE PRODUCTS  
Before using these products, be sure to request the delivery specifications.  
SAFETY REMINDERS  
Please pay sufficient attention to the warnings for safe designing when using these products.  
REMINDERS  
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH  
○
or less).  
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.  
○ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).  
○ Soldering corrections after mounting should be within the range of the conditions determined in the specifications.  
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.  
○ Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal  
design.  
○ Use a wrist band to discharge static electricity in your body through the grounding wire.  
○ Do not expose the products to magnets or magnetic fields.  
○ Do not use for a purpose outside of the contents regulated in the delivery specifications.  
○ The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications  
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement  
equipment, industrial robots) under a normal operation and use condition.  
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or  
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to  
society, person or property.  
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions  
set forth in the each catalog, please contact us.  
(1) Aerospace/Aviation equipment  
(8) Public information-processing equipment  
(2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment  
(3) Medical equipment  
(10) Electric heating apparatus, burning equipment  
(4) Power-generation control equipment  
(5) Atomic energy-related equipment  
(6) Seabed equipment  
(11) Disaster prevention/crime prevention equipment  
(12) Safety equipment  
(13) Other applications that are not considered general-purpose  
applications  
(7) Transportation control equipment  
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing  
protection circuit/device or providing backup circuits in your equipment.  
transformer_dk1_pfc_en  
(3/19)  
Choke Coils for PFC  
PFC Series  
Overview of the PFC Series  
■ FEATURES  
A low height(15.5 to 27mm in height) is achieved  
Large current is achieved in a small shape  
○
○
■ APPLICATION  
AV equipment, digital consumer electronics  
■ PART NUMBER CONSTRUCTION  
PFC  
3514QM  
351  
K
07  
E
**  
-
-
Series name  
Core size  
Inductance  
code  
Inductance  
tolerance  
Rated Peak  
current code✽1  
Control mark  
Control mark  
35uH (35x100)  
350uH (35x101)  
3500uH(35x102)  
350  
351  
352  
J
K
L
±5%  
±10%  
±15%  
±20%  
01  
07  
10  
1A  
7A  
10A  
M
■ OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT  
Temperature range  
Package quantity  
Individual weight✽4  
Operating  
temperature✽2  
Storage  
temperature✽3  
Type  
（°C）  
（°C）  
（pieces/box）  
（g）  
40.0  
27.6  
50.3  
60.5  
91.9  
34.1  
49.7  
57.3  
PFC3514QM  
PFC3318QM  
PFC3519QM  
PFC3819QM  
PFC4124QM  
PFC2723ER  
PFC3125ER  
PFC3525ER  
–30 to +120  
–30 to +120  
–30 to +120  
–30 to +120  
–30 to +120  
–30 to +120  
–30 to +120  
–30 to +120  
–40 to +80  
–40 to +80  
–40 to +80  
–40 to +80  
–40 to +80  
–40 to +80  
–40 to +80  
–40 to +80  
175  
140  
140  
100  
90  
150  
120  
120  
✽1 The rounded-off value.  
✽2 Operating temperature range includes self-temperature rise.  
✽3 The Storage temperature range is for after the circuit board is mounted.  
✽4 Typical weight.  
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/  
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.  
○
○
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(4/19)  
PFC QM series  
PFC3514QM Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC3514QM  
30.0max.  
37.0max.  
15.5max.  
7.5  
5.0  
25.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
5
5
5
5
4
5
6
2
7
8
3
1
Dimensions in mm  
7.5 7.5  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(5/19)  
PFC QM series  
PFC3514QM Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
65  
65  
65  
100  
350  
280  
230  
3.7  
10.0  
9.8  
PFC3514QM-351K04B-00  
PFC3514QM-281K05B-00  
PFC3514QM-231K06B-00  
Through hole  
Through hole  
Through hole  
125  
150  
4.6  
5.5  
9.6  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
PFC3514QM-351K04B-00  
PFC3514QM-281K05B-00  
PFC3514QM-231K06B-00  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(6/19)  
PFC QM series  
PFC3318QM Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC3318QM  
28.0max.  
35.0max.  
20.0max.  
7.5  
5.0  
22.5  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
5
5
5
5
4
5
6 7  
8
3
2
1
Dimensions in mm  
7.5 7.5  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(7/19)  
PFC QM series  
PFC3318QM Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
50  
75  
600  
600  
450  
2.8  
9.0  
9.6  
9.0  
Through hole  
Through hole  
Through hole  
PFC3318QM-601K03B-00  
PFC3318QM-601K03E-00  
PFC3318QM-451K04B-00  
75  
2.8  
3.7  
100  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
PFC3318QM-601K03B-00  
PFC3318QM-601K03E-00  
PFC3318QM-451K04B-00  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(8/19)  
PFC QM series  
PFC3519QM Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC3519QM  
30.0max.  
37.0max.  
20.0max.  
7.5  
5.0  
25.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
5
5
5
5
4
5
6 7  
8
3
2
1
Dimensions in mm  
7.5 7.5  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(9/19)  
PFC QM series  
PFC3519QM Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
50  
100  
450  
300  
230  
3.7  
10  
Through hole  
Through hole  
Through hole  
PFC3519QM-451K04E-00  
PFC3519QM-301K06B-00  
PFC3519QM-231K07B-00  
150  
200  
5.5  
7.4  
9.8  
9.6  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
PFC3519QM-451K04E-00  
PFC3519QM-301K06B-00  
PFC3519QM-231K07B-00  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(10/19)  
PFC QM series  
PFC3819QM Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC3819QM  
33.5max.  
40.0max.  
20.0max.  
7.5  
5.0  
28.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
5
5
5
5
4
5
6
7
8
3
2
1
Dimensions in mm  
7.5 7.5  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(11/19)  
PFC QM series  
PFC3819QM Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
50  
50  
150  
300  
230  
180  
150  
5.5  
9.8  
9.6  
9.5  
9.8  
Through hole  
Through hole  
Through hole  
Through hole  
PFC3819QM-301K06E-00  
PFC3819QM-231K07D-00  
PFC3819QM-181K09B-00  
PFC3819QM-151K11B-00  
200  
250  
300  
7.4  
8.8  
11.1  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
PFC3819QM-301K06E-00  
PFC3819QM-231K07D-00  
PFC3819QM-181K09B-00  
PFC3819QM-151K11B-00  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(12/19)  
PFC QM series  
PFC4124QM Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC4124QM  
38.0max.  
43.0max.  
25.0max.  
7.5  
5.0  
32.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
5
5
5
5
4
5
6
7
8
3
2
1
7.5 7.5  
Dimensions in mm  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(13/19)  
PFC QM series  
PFC4124QM Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
250  
180  
150  
8.8  
9.5  
9.8  
Through hole  
Through hole  
PFC4124QM-181K09D-00  
PFC4124QM-151K11D-00  
300  
11.1  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
PFC4124QM-181K09D-00  
PFC4124QM-151K11D-00  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(14/19)  
PFC ER series  
PFC2723ER Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
F
PFC2723ER  
25.0max.  
28.0max.  
25.0max.  
20.0  
10.0  
20.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
10  
10  
3
4
5
1
2
Dimensions in mm  
20  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(15/19)  
PFC ER series  
PFC2723ER Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
75  
600  
420  
2.4  
9.8  
Through hole  
Through hole  
PFC2723ER-601K02B-00  
PFC2723ER-421K03B-00  
100  
3.4  
10.8  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(16/19)  
PFC ER series  
PFC3125ER Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
P3  
P4  
F
PFC3125ER 26.0max. 33.0max. 27.0max. 9.5  
3.5  
16.5  
6.5  
21.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
9.5  
16.5  
3.5  
13  
6
5
7
8
1
4
3
2
6.5 6.5 6.5 6.5  
Dimensions in mm  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(17/19)  
PFC ER series  
PFC3125ER Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
50  
100  
450  
300  
230  
2.7  
10.0  
10.4  
9.0  
Through hole  
Through hole  
Through hole  
PFC3125ER-451K03E-00  
PFC3125ER-301K05B-00  
PFC3125ER-231K06B-00  
150  
200  
4.9  
6.4  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(18/19)  
PFC ER series  
PFC3525ER Type  
■ SHAPE & DIMENSIONS  
Dimensions in mm  
Type  
D
W
H
P1  
P2  
P3  
P4  
F
PFC3525ER 27.5max. 37.0max. 27.0max. 9.5  
3.5  
16.5  
6.5  
22.0  
■ RECOMMENDED LAND PATTERN  
■ CIRCUIT DIAGRAM  
9.5  
16.5  
3.5  
13  
6
5
7
8
1
4
3
2
6.5 6.5 6.5 6.5  
Dimensions in mm  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  
(19/19)  
PFC ER series  
PFC3525ER Type  
■ ELECTRICAL CHARACTERISTICS  
□
CHARACTERISTICS SPECIFICATION TABLE  
Mount method  
Frequency  
(kHz)min  
PFC output  
power  
(W)  
Inductance  
(µH)  
Rated peek  
current✽1  
(A)  
Turn ratio  
(Np/Npd)  
Part No.  
50  
50  
50  
150  
300  
225  
180  
4.1  
10.4  
10.0  
10.5  
Through hole  
Through hole  
Through hole  
PFC3525ER-301K04E-00  
PFC3525ER-231K06E-00  
PFC3525ER-181K09B-00  
200  
250  
5.6  
9.5  
○ Measurement equipment✽2  
Measurement item  
Inductance  
Product No.  
Manufacturer  
4284A  
Agilent Technologies  
Agilent Technologies  
DC bias characteristics  
4284A + 42841A  
✽1 The rated peak current is determined by the triangular waveform current when the temperature increase is lass than 40℃ during continuous operation.  
✽2 Equivalent measurement equipment may be used.  
□
INDUCTANCE CHANGE vs. DC BIAS CHARACTERISTICS GRAPH  
DC current(A)  
· All specifications are subject to change without notice.  
transformer_dk1_pfc_en  

相关型号：

PFC3819QM-181K09B-50

 PFC用扼流圈
TDK

PFC3819QM-231K07D-00

 General Purpose Inductor, 230uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT
TDK

PFC3819QM-231K07D-50

 PFC用扼流圈
TDK

PFC3819QM-301K06E-00

 General Purpose Inductor, 300uH, 10%, 2 Element, Ferrite-Core, ROHS COMPLIANT
TDK

PFC3819QM-301K06E-50

 PFC用扼流圈
TDK

PFC3820QN-900K11B-00

 PFC用扼流圈
TDK

PFC3831QN-351K08B-00

 PFC用扼流圈
TDK

PFC3M-10000

 10 KW, 3 Phase Module For Active Power Factor Correction
SENSITRON

PFC400

 400 WATT POWER FACTOR CORRECTED SUPPLIES
RSG

PFC400-50B

 400 WATT POWER FACTOR CORRECTED SUPPLIES
RSG

PFC400-51B

 400 WATT POWER FACTOR CORRECTED SUPPLIES
RSG

PFC400-55B

 400 WATT POWER FACTOR CORRECTED SUPPLIES
RSG
©2020 ICPDF网 联系我们和版权申明