411D-6 [TELEDYNE]
ESTABLISHED RELIABILITY TO-5 RELAYS;
| 型号： | 411D-6 |
| 厂家： | 
TELEDYNE TECHNOLOGIES INCORPORATED |
| 描述： | ESTABLISHED RELIABILITY TO-5 RELAYS |
| 文件： | 总6页 (文件大小：146K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SERIES
411
ESTABLISHED RELIABILITY
TO-5 RELAYS
SPDT
SERIES
DESIGNATION
RELAY TYPE
411
SPDT basic relay
411D
SPDT relay with internal diode for coil suppression
SPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
411DD
411T
SPDT relay with internal transistor driver and coil transient suppression
diode
INTERNAL CONSTRUCTION
DESCRIPTION
The TO-5 relay, originally conceived and developed by Teledyne, has become
UNI-FRAME
UPPER
one of the industry standards for low-level switching from dry circuit to 1
ampere. Designed specifically for high-density PC board mounting, its small
size and low coil power dissipation make the 411 relay one of the most
versatile ultraminiature relays available.
STATIONARY
CONTACT
ARMATURE
LOWER
STATIONARY
CONTACT
The following unique construction features and manufacturing techniques
provide excellent resistance to environmental extremes and overall high
reliability.
MOVING
CONTACT
• All welded construction.
• Unique uni-frame design, providing high magnetic efficiency and
mechanical rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of internal
cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
The Series 411D and 411DD relays have internal discrete silicon diodes for
coil suppression and polarity reversal protection. The hybrid 411T relay
features an internal silicon suppression diode and transistor driver. This hybrid
package reduces required PC board floor space by reducing the number of
external components needed to drive the relay.
Temperature
–65°C to +125°C
30 g’s to 3000 Hz
(Ambient)
Vibration
(General Note 1)
By virtue of its inherently low intercontact capacitance and contact circuit
losses, the 411 relay has proven to be an excellent ultraminiature RF switch
for frequency ranges well into the UHF spectrum. A typical RF application for
the TO-5 relay is in handheld radio transceivers, wherein the combined
features of good RF performance, small size, low coil power dissipation and
high reliability make it a preferred method of T-R switching (see Figure 1).
Shock
75 g’s,
6 msec, half-sine
(General Note 1)
Acceleration
Enclosure
Weight
50 g’s
Hermetically sealed
0.089 oz. (2.52g) max.
411 Page 1
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2003 TELEDYNE RELAYS
411/1203/Q1
SERIES 411
GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)
Contact Arrangement
Rated Duty
1 Form C (SPDT)
Continuous
Contact Resistance
0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc (measured 1/8" from header)
Resistive:
Inductive:
Lamp:
1 Amp/28Vdc
200 mA/28Vdc (320 mH)
100 mA/28Vdc
Contact Load Ratings (DC)
(See Fig. 2 for other DC
resistive voltage/current ratings)
Low Level:
10 to 50 μA/10 to 50mV
Resistive:
250 mA/115Vac, 60 and 400 Hz (Case not grounded)
100 mA/115Vac, 60 and 400 Hz (Case grounded)
Contact Load Ratings (AC)
Contact Life Ratings
10,000,000 cycles (typical) at low level
1,000,000 cycles (typical) at 0.5A/28Vdc resistive
100,000 cycles min. at all other loads specified above
Contact Overload Rating
Contact Carry Rating
Coil Operating Power
Operate Time
2A/28Vdc Resistive (100 cycles min.)
Contact factory
300 milliwatts typical at nominal rated voltage @ 25°C
2.0 msec max. at nominal rated coil voltage
Release Time
411 Series: 1.5 msec max.
1.5 msec max.
411D, 411DD, 411T Series: 4.0 msec max.
Contact Bounce
Intercontact Capacitance
Insulation Resistance
Dielectric Strength
Negative Coil Transient (Vdc)
Diode P.I.V. (Vdc)
0.4 pf typical
10,000 megohms min. between mutually isolated terminals
Atmospheric pressure: 500 Vrms/60Hz
411D, 411DD, 411T
70,000 ft.: 125 Vrms/60Hz
1.0 max
411D, 411DD, 411T
100 min.
Base Turn Off Voltage (Vdc)
Emitter-base breakdown Voltage (BVEBO) (@25°C) (Vdc)
Collector-base breakdown Voltage (BVEBO) (@25°C & lc = 100 μA) (Vdc)
0.3 min.
411T
Transistor
6.0 min.
Characteristics
75 min.
DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)
411-5
411D-5
411DD-5
411T-5
411-6
411D-6
411DD-6
411T-6
411-9
411D-9
411-12
411D-12
411-18
411D-18
411-26
411D-26
BASE PART
NUMBERS
411DD-9 411DD-12 411DD-18 411DD-26
411T-9
(See Note 10 for full P/N example)
411T-12
12.0
16.0
500
411T-18
18.0
24.0
1130
1130
13.6
17.2
13.8
18.8
13.5
14.5
14.5
0.53
0.58
8.4
411T-26
26.5
32.0
2000
2000
11.5
14.4
11.5
15.5
18.0
19.0
19.0
0.40
0.89
10.4
Nom.
Max.
5.0
6.0
6.0
8.0
9.0
Coil Voltage (Vdc)
Coil Resistance
12.0
280
280
25.9
33.7
28.0
38.1
6.8
411, 411D, 411T (Note 4)
63
125
98
(Ohms 10ꢀ @25°C)
411DD (Note 4)
Min.
50
500
72.7
100
66.6
89.6
3.7
46.3
62.4
42.0
55.5
4.5
20.0
25.6
20.9
28.1
9.0
Coil Current (mAdc @25°C)
(411DD Series)
Max.
Min.
Coil Current (mAdc @25°C)
(411T Series)
Max.
411, 411D
411DD
Pick-up Voltage (Vdc, Max.)
4.5
5.5
7.8
10.0
10.0
0.80
0.40
5.6
411T (Note 7)
3.9
5.2
7.8
Base Current to Turn On (mAdc, Max.) (411T Series) (Note 7)
2.38
0.15
2.4
1.60
0.18
2.8
1.07
0.35
4.2
Min.
Drop-out Voltage (Vdc)
(See Note 8 for 411T Series)
Max.
TYPICAL RF PERFORMANCE
PERFORMANCE CURVES
(NOTE 2)
0
.1
411T
TYPICAL DC CONTACT RATING (RESISTIVE)
.2
.3
300
.4
250
200
150
100
50
.5
.6
10
20
30
40
50
60
70
1.92
1.22
1.07
1.02
1.01
1.00
RETURN LOSS (VSWR)
411T
1.00
1.0
.01
0.5
.1
.5
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
FREQUENCY (GHz)
LOAD CURRENT (AMPS DC)
FIGURE 1
FIGURE 2
©2003 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
411 Page 2
411/1203/Q1
SERIES 411
SCHEMATIC DIAGRAMS
LEAD & PIN LOCATIONS
(Viewed from Terminals)
PIN NUMBERS
(For reference only)
OUTLINE DIMENSIONS
CASE DETAIL
.031 (.79)
.003 (0.08)
9
1
.370
(9.40)
DIA. MAX.
.200 (5.08)
.010 (.25) DIA.
2
8
411
411DD
411T
.335
(8.51)
DIA. MAX.
7
.035 (.89)
.010 (0.25)
3
6
4
411T
5 LEADS
.270 (6.86) MAX.
36° 3°
8 LEADS
TYP.
45° 3°
4
3
1
2
TYP.
WIRE LEAD: .75 (19.05) MIN.
PIN: .187 (4.75) .010 (.25)
(See Note 6)
411D
5
411, 411D, 411DD
411T
SCHEMATICS ARE VIEWED FROM TERMINALS
+.002 (.05)
.001 (.03)
.017 (.43)
DIA.
411, 411D, 411DD
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 μsec or transfer in excess of
1 μsec.
TYPICAL LOGIC INTERFACE
(See Note 8)
2. “Typical” characteristics are based on available data and are best estimates. No
on-going verification tests are performed.
Vcc
Vr
Pin 1
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable at relay terminals due
to internal series semiconductor, 411DD and 411T only.
5. Unless otherwise specified, relays will be supplied with either gold-plated or
solder-coated leads.
6. The slash and characters appearing after the slash are not marked on the relay.
7. Limit Base Emitter current to 15 mAdc.
8. Applicable to all coil voltages. See Base current to turn on.
9. Screened HI-REL versions available. Contact factory.
10.
Notes:
Logic 1 activates the relay.
Logic 0 de-activates the relay.
Vcc = logic bias power.
Vr = coil energization voltage.
Pin 4
Pin 2
Logic element
1 = 0.40 to 2.38mA
0 = 0.3Vdc min.
Pin 3
2
®
Teledyne Part Numbering System for T R Established Reliability Relay
ER 411 Y M3
- 26 A / S Q
Q= Solder Coated Leads
G= Gold Plated Leads
(Notes 5 and 6)
Estab
lished Reliability
Designator
Relay Series
S= .187" leads
(Note 6)
Optional Ground Pin
(See Appendix)
Screening and Reliability
Level
Pad Option
(See Appendix)
Coil Voltage
Teledyne Part Numbering System for Military Qualified (JAN) Relays
411 M3 - 26
J
P
L
Militar
y (JAN)
Screening and Reliability
Level
Designator
Relay Series
Terminal Variant
P = 0.187"
Coil Voltage
Pad Option
(See Appendix)
411 Page 3
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2003 TELEDYNE RELAYS
411/1203/Q1
Appendix A: Spacer Pads
Pad designation and
Dim. H
Max.
Height
For use with the following:
bottom view dimensions
ER411T
ER412, ER412D, ER412DD
712, 712D, 712TN,
RF300, RF310, RF320
.295 (7.49)
Ø.150
[3.81]
(REF)
.300 (7.62)
Dim
MAX
H
ER420, ER422D, ER420DD, 421,
ER421D, ER421DD, ER422, ER422D, .305 (7.75)
ER422DD, 722, 722D, RF341
ER431T, ER432T,
ER432, ER432D, ER432DD
.400 (10.16)
732, 732D, 732TN, RF303, RF313,
RF323
.410 (10.41)
RF312
.350 (8.89)
.295 (7.49)
“M4” Pad for TO-5
“M4” Pad for TO-5
ER411, ER411D, ER411DD
Dim
MAX
H
ER431, ER431D, ER431DD
RF311
.400 (10.16)
.300 (7.62)
RF331
.410 (10.41)
.305 (7.75)
172, 172D
ER114, ER114D, ER114DD,
J114, J114D, J114DD
Dim
MAX
H
.300 (7.62)
ER134, ER134D, ER134DD,
J134, J134D, J134DD
.400 (10.16)
RF100
RF103
.315 (8.00)
“M4” Pad for Centigrid®
.420 (10.67)
.156
[3.96]
(REF)
122C, A152
.320 (8.13)
.300 (7.62)
Dim
MAX
H
ER116C, J116C
.256
[6.5]
ER136C, J136C
RF180
.400 (10.16)
.325 (8.25)
.305 (7.75)
(REF)
A150
“M9” Pad for Centigrid®
Notes:
1. Spacer pad material: Polyester ꢀlm.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise speciꢀed, tolerance is .010 (.25).
5. Add 10 mꢁ to the contact resistance show in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Appendix A: Spreader Pads
Pad designation and
bottom view dimensions
Dim. H
Max.
Height
For use with the following:
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
.370 [9.4]
MAX SQ
.388 (9.86)
.393 (9.99)
.493 (12.52)
.503 (12.78)
.100
[2.54]
Dim
MAX
H
712, 712D, 712TN
.150
.014
[0.36]
(REF)
ER431T, J431T, ER432, ER432D
ER432DD, J432, J432D, J432DD
ER432T, J432T
[3.81]
.300
[7.62]
.100
[2.54]
732, 732D, 732TN
.370
[9.4]
MIN
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
.200
[5.08]
.398 (10.11)
J422D, ER422DD, J422DD, 722
“M” Pad 5/ 6/
.390 [9.91]
SQ
ER411T
ER412, ER412D, ER412DD
J412, J412D, J412DD
.100
[2.54]
.441 (11.20)
.100
[2.54]
.150
[3.81]
Dim
MAX
H
712, 712D
ER421, ER421D, ER421DD
722, 732D
.451 (11.46)
.451 (11.46)
.300
[7.62]
ER431T
.130
[3.3]
.150
[3.81]
.546 (13.87)
.556 (14.12)
ER432, ER432D, ER432DD
.300
[7.62]
732, 732D
“M2” Pad 7/ 8/
ER411, ER411D, ER411DD
ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
.388 (9.86)
.393 (9.99)
.398 (10.11)
.370 [9.4]
MAX SQ
.100
[2.54]
712X, 712DX, 712TNX
Dim
MAX
H
ER420X, ER420DX, ER420DDX
ER421X, ER421DX, ER421DDX
ER422X, ER422DX
ER422DDX, 722X, 722DDX
ER431, ER431D, ER431DD
ER431TX
ER432X, ER432DX, ER432DDX
ER432TX
732X, 732DX, 732TNX
.150
[3.81]
.014
[0.36]
(REF)
.300
[7.62]
.100
[2.54]
.370
[9.4]
MIN
.200
[5.08]
.493 (12.52)
.503 (12.78)
“M3” Pad 5/ 6/ 9/
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise speciꢀed, tolerance is .010” (0.25).
5/. Add 25 mꢁ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mꢁ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
(800) 284-7007 • www.teledynerelays.com
ꢂ
+44 (0) 1236 453124 • www.teledyne-europe.com
© 2008 Teledyne Relays
Appendix A: Ground Pin Positions
"Z" POSITION
"X" POSITION
"Z" POSITION
Ø.200
[Ø5.08]
Ø.200
[Ø5.08]
"Y" POSITION
45° 3°
"Y" POSITION
36° 3°
TO-5 Relays:
TO-5 Relays:
ER411, ER431, RF311, RF331
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF310, RF313,
RF320, RF323
"Y" POSITION
.100
[2.54]
"Y" POSITION
"Z" POSITION
"W" POSITION
"Z" POSITION
.100
[2.54]
.100
[2.54]
.050
[1.27]
.100
[2.54]
"X" POSITION
"U" POSITION
.100
[2.54]
.100
[2.54]
(ER116C and ER136C only)
Centigrid® Relays:
RF180, ER116C, 122C, ER136C
Centigrid® Relays:
RF100, RF103, ER114, ER134, 172
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
Indicates ground pin position
3. Tolerances: .010 ( .25) unless otherwise speciꢀed
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明