421D-6 [TELEDYNE]
MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS;型号: | 421D-6 |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS |
文件: | 总6页 (文件大小:246K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SERIES
421
MAGNETIC-LATCHING
ESTABLISHED RELIABILITY
TO-5 RELAYS
SPDT
SERIES
DESIGNATION
RELAY TYPE
421
SPDT basic relay
421D
SPDT relay with internal diode for coil transient suppression
SPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
421DD
The Series 421D and 421DD utilize discrete silicon diodes for coil
suppression and polarity reversal protection.
DESCRIPTION
The magnetic-latching TO-5 relay, originally conceived and
developed by Teledyne, has become one of the industry standards
for low-level switching from dry circuit to 0.5 ampere. Designed for
high-density PC board mounting, its small size and low coil power
dissipation make the 421 relay one of the most versatile
ultraminiature relays available.
By virtue of its inherently low intercontact capacitance and contact
circuit losses, the 421 relay has proven to be an excellent
ultraminiature RF switch for frequency ranges well into the UHF
spectrum. A typical RF application for this TO-5 relay is in handheld
radio transceivers, wherein the combined features of good RF
performance, small size, low coil power dissipation and high
reliability make it a preferred method of transmit-receive switching
(see Figure 1).
The following unique construction features and manufacturing
techniques provide excellent resistance to environmental extremes
and overall high reliability:
• All welded construction.
• Unique uni-frame design providing high magnetic efficiency and
mechanical rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of
internal cleanliness.
The Series 421 magnetic-latching relays are ideally suited for
applications where coil power dissipation must be minimized. The
relays can be operated with a short duration pulse. After the contacts
have transferred, no external holding power is required.
The magnetic latching feature of the Series 421 provides a “memory”
capability, since the relays will not reset upon removal of coil power.
• Precious metal alloy contacts material with gold plating assures
excellent high current and dry circuit switching capabilities.
PERMANENT MAGNET
MAGNETIC CIRCUIT A
SOFT IRON CORE A
MAGNETIC CIRCUIT B
PRINCIPLE OF OPERATION
Energizing Coil B produces a magnetic field
COIL B
COIL A
opposing the holding flux of the permanent magnet
in Circuit B. As this net holding force decreases, the SOFT IRON
attractive force in the air gap of Circuit A, which also
results from the flux of the permanent magnet,
becomes great enough to break the armature free
of Core B, and snap it into a closed position against
Core A. The armature then remains in this position
upon removal of power from Coil B, but will snap
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
SOFT IRON
CORE A
CORE B
AIR GAP
SOFT IRON
ARMATURE
Temperature
MOVING
CONTACT
–65°C to +125°C
(Ambient)
Vibration
30 g’s to 3000 Hz
STATIONARY
CONTACT
(General Note 1)
back into position B upon energizing Coil A. Since operation depends upon cancellation
of a magnetic field, it is necessary to apply the correct polarity to the relay coils as
indicated on the relay schematic. When latching relays are installed in equipment, the
latch and reset coils should not be pulsed simultaneously. Coils should not be pulsed
with less than rated coil voltage and the pulse width should be a minimum of three times
the specified operate time of the relay. If these conditions are not followed, it is possible
for the relay to be in the magnetic neutral position.
Shock
(General Note 1)
100 g’s,
6 msec, half-sine
Acceleration
Enclosure
Weight
50 g’s
Hermetically sealed
0.089 oz. (2.52g) max.
421 Page 1
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2005 TELEDYNE RELAYS
421/1205/Q1
SERIES 421
GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)
Contact Arrangement
Rated Duty
1 Form C (SPDT)
Continuous
Contact Resistance
0.125 ohm max. before life; 0.225 ohm max. after life at 0.5A/28Vdc (measured 1/8" from header)
Resistive:
Inductive:
Lamp:
0.5 Amp/28Vdc
200 mA/28Vdc (320 mH)
100 mA/28Vdc
Contact Load Ratings (DC)
(See Fig. 2 for other DC
resistive voltage/current ratings)
Low Level:
10 to 50 µA/10 to 50mV
Resistive:
250 mA/115Vac, 60 and 400 Hz (Case not grounded)
100 mA/115Vac, 60 and 400 Hz (Case grounded)
Contact Load Ratings (AC)
Contact Life Ratings
10,000,000 cycles (typical) at low level
100,000 cycles min. at all other loads specified above
Contact Overload Rating
Contact Carry Rating
Coil Operating Power
Operate Time
1A/28Vdc Resistive (100 cycles min.)
Contact factory
290 milliwatts typical at nominal rated voltage @ 25°C
1.5 msec max. at nominal rated coil voltage
1.5 msec max.
Contact Bounce
Minimum Operate Pulse
Intercontact Capacitance
Insulation Resistance
Dielectric Strength
4.5 msec width @ rated voltage
0.4 pf typical
10,000 megohms min. between mutually isolated terminals
Atmospheric pressure: 500 Vrms/60Hz
421D/421DD
70,000 ft.: 125 Vrms/60Hz
1.0 max
Negative Coil Transient (Vdc)
Diode P.I.V. (Vdc)
421D/421DD
100 min.
DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)
421-5
421D-5
421DD-5
421-6
421D-6
421DD-6
421-9
421D-9
421DD-9
421-12
421D-12
421DD-12
421-18
421D-18
421DD-18
421-26
421D-26
421DD-26
BASE PART
NUMBERS
(See Note 8 for full P/N example)
Nom.
Max.
5.0
6.0
6.0
8.0
9.0
12.0
280
280
25.7
34.9
6.8
12.0
16.0
500
500
19.6
26.7
9.0
18.0
24.0
1130
1130
13.4
18.8
13.5
13.5
14.5
26.5
32.0
2000
2000
11.2
15.2
18.0
18.0
19.0
Coil Voltage (Vdc)
Coil Resistance
421/421D
421DD (Note 4)
Min.
61
120
97
(Ohms ±10% @25°C)
48
78.0
111.8
3.5
45.8
63.0
4.5
Coil Current (mAdc @25°C)
(421DD Series only)
Max.
421
Set & Reset Voltage
(Vdc, Max.)
421D
3.7
4.5
6.8
9.0
421DD
4.5
5.5
7.8
10.0
PERFORMANCE CURVES
(NOTE 2)
TYPICAL RF PERFORMANCE
TYPICAL DC CONTACT RATING (RESISTIVE)
0
.1
300
250
200
150
100
50
.2
.3
.4
10
20
30
40
50
60
70
1.92
1.22
1.07
1.02
1.01
1.00
1.00
.01
0.5
.1
.5
1.0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
LOAD CURRENT (AMPS DC)
FREQUENCY (GHz)
FIGURE 2
FIGURE 1
©2005 TELEDYNE RELAYS
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
421 Page 2
421/1205/Q1
SERIES 421
SCHEMATIC DIAGRAMS
OUTLINE DIMENSIONS
CASE DETAIL
TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY)
(Viewed from Terminals)
.370
(9.40)
DIA. MAX.
COIL B
.031 (.79)
.003 (0.08)
.335
(8.51)
DIA. MAX.
36° 3°
TYP.
COIL A
COIL B
9
1
.035 (.89)
.010 (0.25)
421
.280 (7.11) MAX.
8
7
2
.200 (5.08)
.010 (.25) DIA.
4
WIRE LEAD: .75 (19.05) MIN.
PIN: .187 (4.75) .010 (.25)
(See Note 6)
6
+.002 (.05)
–.001 (.03)
.017 (.43)
DIA.
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
COIL A
421D
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 µsec or transfer in excess of 1
µsec.
2. “Typical” characteristics are based on available data and are best estimates. No
on-going verification tests are performed.
COIL B
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable at relay terminals due to
internal series diode, 421DD only.
5. Unless otherwise specified, relays will be supplied with either gold-plated or solder-
coated leads.
6. The slash and characters appearing after the slash are not marked on the relay.
7. Screened HI-REL versions available. Contact factory.
8.
COIL A
421DD
SCHEMATICS ARE VIEWED FROM TERMINALS
COIL A LAST ENERGIZED
2
®
Teledyne Part Numbering System for T R Established Reliability Relay
ER 421
X M3 - 26 A / S Q
Q= Solder Coated Leads
G= Gold Plated Leads
(Notes 5 and 6)
Estab
Desig
lished
nator
Relia
bility
Relay Series
Optional Ground Pin
(See Appendix)
S= 0.187" leads
(Note 6)
Screening and Reliability
Level
Pad Option
(See Appendix)
Coil Voltage
Teledyne Part Numbering System for Military Qualified (JAN) Relays
421 26
J
X
M
-
P
L
Milita
ry (JA
N)
Screening and Reliability
Level
Desig
nator
Relay Series
Terminal Variant
P = 0.187"
Optional Ground Pin
(See Appendix)
Coil Voltage
Pad Option
(See Appendix)
JAN part number example is for reference only. Actual part number may not exist.
421 Page 3
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2005 TELEDYNE RELAYS
421/1205/Q1
Appendix A: Spacer Pads
Pad designation and
bottom view dimensions
Dim. H
Max.
Height
For use with the following:
ER411T
ER412, ER412D, ER412DD
.295 (7.49)
Ø.150
[3.81]
(REF)
712, 712D, 712TN,
RF300, RF310, RF320
.300 (7.62)
Dim
H
MAX
ER420, ER422D, ER420DD, 421,
ER421D, ER421DD, ER422, ER422D, .305 (7.75)
ER422DD, 722, 722D, RF341
ER431T, ER432T,
.400 (10.16)
ER432, ER432D, ER432DD
732, 732D, 732TN, RF303, RF313,
.410 (10.41)
RF323
RF312
.350 (8.89)
“M4” Pad for TO-5
ER411, ER411D, ER411DD
.295 (7.49)
Dim
H
MAX
ER431, ER431D, ER431DD
RF311
.400 (10.16)
.300 (7.62)
RF331
.410 (10.41)
.305 (7.75)
“M4” Pad for TO-5
172, 172D
ER114, ER114D, ER114DD,
J114, J114D, J114DD
Dim
H
MAX
.300 (7.62)
ER134, ER134D, ER134DD,
J134, J134D, J134DD
.400 (10.16)
RF100
RF103
.315 (8.00)
“M4” Pad for Centigrid®
.420 (10.67)
.156
[3.96]
(REF)
122C, A152
.320 (8.13)
.300 (7.62)
Dim
MAX
H
ER116C, J116C
.256
[6.5]
(REF)
ER136C, J136C
RF180
.400 (10.16)
.325 (8.25)
.305 (7.75)
A150
“M9” Pad for Centigrid®
Notes:
1. Spacer pad material: Polyester film.
2. To specify an “M4” or “M9” spacer pad, refer to the mounting variants portion of the part numbering
example in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010 (.25).
5. Add 10 mΩ to the contact resistance show in the datasheet.
6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Appendix A: Spreader Pads
Pad designation and
bottom view dimensions
Dim. H
Max.
Height
For use with the following:
ER411T, J411T, ER412, ER412D
ER412DD, J412, J412D, J412DD
ER412T, J412T
.370 [9.4]
MAX SQ
.388 (9.86)
.393 (9.99)
.493 (12.52)
.503 (12.78)
.100
[2.54]
Dim
MAX
H
712, 712D, 712TN
.150
[3.81]
.014
[0.36]
(REF)
ER431T, J431T, ER432, ER432D
ER432DD, J432, J432D, J432DD
ER432T, J432T
.300
[7.62]
.100
[2.54]
732, 732D, 732TN
.370
[9.4]
MIN
ER420, J420, ER420D, J420D
ER420DD, J420DD, ER421, J421
ER421D, J421D, ER421DD
.200
[5.08]
.398 (10.11)
J422D, ER422DD, J422DD, 722
“M” Pad 5/ 6/
.390 [9.91]
SQ
ER411T
.100
[2.54]
ER412, ER412D, ER412DD
J412, J412D, J412DD
.441 (11.20)
.100
[2.54]
.150
[3.81]
Dim
MAX
H
712, 712D
.451 (11.46)
.451 (11.46)
.300
[7.62]
ER421, ER421D, ER421DD
722, 732D
ER431T
ER432, ER432D, ER432DD
.130
[3.3]
.150
[3.81]
.546 (13.87)
.556 (14.12)
.300
[7.62]
732, 732D
“M2” Pad 7/ 8/
ER411, ER411D, ER411DD
ER411TX
ER412X, ER412DX, ER412DDX
ER412TX
.388 (9.86)
.393 (9.99)
.398 (10.11)
.370 [9.4]
MAX SQ
.100
[2.54]
712X, 712DX, 712TNX
Dim
MAX
H
ER420X, ER420DX, ER420DDX
ER421X, ER421DX, ER421DDX
ER422X, ER422DX
.150
[3.81]
.014
[0.36]
(REF)
.300
[7.62]
.100
[2.54]
ER422DDX, 722X, 722DDX
.370
[9.4]
MIN
ER431, ER431D, ER431DD
ER431TX
.200
[5.08]
.493 (12.52)
.503 (12.78)
ER432X, ER432DX, ER432DDX
ER432TX
“M3” Pad 5/ 6/ 9/
732X, 732DX, 732TNX
Notes:
1. Spreader pad material: Diallyl Phthalate.
2. To specify an “M”, “M2” or “M3” spreader pad, refer to the mounting variants portion of the part number example
in the applicable datasheet.
3. Dimensions are in inches (mm).
4. Unless otherwise specified, tolerance is ± .010” (0.25).
5/. Add 25 mΩ to the contact resistance shown in the datasheet.
6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet.
7/. Add 50 mΩ to the contact resistance shown in the datasheet.
8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet.
9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.)
(800) 284-7007 • www.teledynerelays.com
♦
+44 (0) 1236 453124 • www.teledyne-europe.com
© 2008 Teledyne Relays
Appendix A: Ground Pin Positions
"Z" POSITION
"X" POSITION
"Z" POSITION
Ø.200
[Ø5.08]
Ø.200
[Ø5.08]
"Y" POSITION
45°±3°
"Y" POSITION
36°±3°
TO-5 Relays:
TO-5 Relays:
ER411T, ER412, ER412T, ER420, ER421, ER422,
ER431T, ER432, ER432T, 712, 712TN, 400H, 400K,
400V, RF300, RF303, RF341, RF312, RF310, RF313,
RF320, RF323
ER411, ER431, RF311, RF331
"Y" POSITION
.100
[2.54]
"Y" POSITION
"Z" POSITION
"W" POSITION
"Z" POSITION
.100
[2.54]
.100
[2.54]
.050
.100
[1.27]
[2.54]
"X" POSITION
"U" POSITION
(ER116C and ER136C only)
.100
[2.54]
.100
[2.54]
Centigrid® Relays:
Centigrid® Relays:
RF180, ER116C, 122C, ER136C
RF100, RF103, ER114, ER134, 172
NOTES
1. Terminal views shown
2. Dimensions are in inches (mm)
Indicates ground pin position
3. Tolerances: ± .010 (±.25) unless otherwise specified
4. Ground pin positions are within .015 (0.38) dia. of true position
5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref.
6. Lead dia. 0.017 (0.43) nom.
Indicates glass insulated lead position
Indicates ground pin or lead position
depending on relay type
© 2008 Teledyne Relays
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明