CCP-18D24O-M [TELEDYNE]
Commercial Normally Open Multi-throw, DC-3GHz, Low PIM;型号: | CCP-18D24O-M |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | Commercial Normally Open Multi-throw, DC-3GHz, Low PIM 继电器 |
文件: | 总8页 (文件大小:512K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
PART NUMBER DESCRIPTION
CCP-18D Commercial Normally Open Multi-throw, DC-3GHz, Low PIM
These switches have extremely low passive intermodulation for use in narrow bandwidth communications
applications.
The CCP-18D is a broadband multi-position coaxial switch designed to switch RF signals from one input
port to any one of 3 or 4 output ports. It is designed for 50 Ohms transmission line systems. The standard
actuator gives individual solenoid control of each position and when de-energized, all positions are open.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Operating Temperature
–40°C to 65°C
10 g’s RMS
Form Factor
Multi-Throw,
break before make
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
Frequency Range
DC–3 GHz
50 Ohms
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Characteristic Impedance
Switching Time
20 ms (max.)
Standard Actuator Life
Connector Type
1,000,000 cycles
7/16 DIN
Actuation Voltage Available
Actuation Current, max. @ ambient
12 15 24 28
V
600 480 300 270 mA
Humidity (Moisture Seal)
Weight
Available
9 oz. (255.2g) (max.)
PERFORMANCE CHARACTERISTICS
PASSIVE INTERMODULATION CHARACTERISTICS
Tone 1 Frequency Tone 2 Frequency IM3 Frequency
Frequency
DC–3 GHz
0.35
PIM Threshold
(dBc)
(MHz)
(MHz)
(MHz)
Insertion Loss, dB, max.
Isolation, dB, min.
VSWR , max.
1945
1990
1900
-140.0
70
1.3:1
P1 P2 (dBm)
PIM (dBc)
PEAK PIM (dBc)
RF Power (cw), W, max.
200
43
-159.6
-156.6
PART NUMBERING SYSTEM
CCP-18
D
1
3
C
-
T **
Series
Options
Connectors
Actuator Type
Number of Positions
OPTIONS
Actuator Voltage
CONNECTOR
ACTUATOR VOLTAGE
NUMBER OF POSITIONS
3: SP3T
ACTUATOR TYPE
D: 7/16 FEMALE
1: 28 VDC NORMALLY OPEN
2: 15 VDC NORMALLY OPEN
3: 12 VDC NORMALLY OPEN
4: 24 VDC NORMALLY OPEN
0: NO INDICATOR CONTACTS
C: INDICATOR CONTACTS
T: TTL DRIVERS WITH DIODES
D: COIL TRANSIENT SUPPRESSION DIODES
S: D-SUB CONNECTOR*
4: SP4T
TD: DECODERS AND TTL DRIVERS WITH
DIODES
M: MOISTURE SEAL
**SEE PARTS LIST ON PAGE 8
* 15 pin D-Sub Connector
(See Connector Pinout page)
For additional options, please contact factory.
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-18 Page 1
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
SCHEMATICS AND MECHANICAL OUTLINE
TELEDYNE COAX SWITCHES
P/N:
VOLTAGE:
D/C:
VDC
M/O:
RoHS
MADE IN
SCHEM ATIC
SHO W N IN
NO RM ALLY O PEN PO SITIO N
“-S OPTION” 15-PIN D-SUB CONNECTOR (EXAMPLE: CCP-18N160-S)
CCP-18D Page 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
CONNECTOR PINOUT FOR NORMALLY OPEN SP3T MULTI-THROW SWITCHES
EXAMPLE
CCP-18D130-S
CCP-18D13C-S
CCP-18D130-TS
CCP-18D13C-TS
CCP-18D130-TDS CCP-18D13C-TDS
INDICATOR
YES
YES
YES
YES
TTL
YES
DECODERS & TTL
YES
YES
PIN NO.
9-PIN
9-PIN
PORT 1
9-PIN
9-PIN
PORT 1
9-PIN
9-PIN
1
2
3
4
5
6
7
8
9
PORT 1
PORT 2
PORT 3
PORT 1
PORT 2
PORT 3
LOGIC 1
LOGIC 2
LOGIC 1
LOGIC 2
PORT 2
PORT 2
PORT 3
PORT 3
E INDICATOR
F INDICATOR
G INDICATOR
COMMON
E INDICATOR
F INDICATOR
G INDICATOR
COMMON
E INDICATOR
F INDICATOR
G INDICATOR
COMMON
COMMON
COMMON
VSW
COMMON
VSW
VSW
VSW
D INDICATOR (COM)
D INDICATOR (COM)
D INDICATOR (COM)
CONNECTOR PINOUT FOR NORMALLY OPEN SP4T MULTI-THROW SWITCHES
EXAMPLE
CCP-18D140-S
CCP-18D14C-S
CCP-18D140-TS
CCP-18D14C-TS
CCP-18D140-TDS CCP-18D14C-TDS
INDICATOR
YES
YES
YES
YES
TTL
YES
DECODERS & TTL
YES
YES
PIN NO.
9-PIN
15-PIN
PORT 1
PORT 2
PORT 3
PORT 4
9-PIN
TTL 1
TTL 2
TTL 3
TTL 4
15-PIN
TTL 1
TTL 2
TTL 3
TTL 4
9-PIN
15-PIN
LOGIC 1
LOGIC 2
LOGIC 3
1
2
PORT 1
PORT 2
PORT 3
PORT 4
LOGIC 1
LOGIC 2
LOGIC 3
3
4
5
6
7
COMMON
COMMON
COMMON
VSW
COMMON
VSW
COMMON
VSW
COMMON
VSW
8
9
D INDICATOR (COM)
E INDICATOR
D INDICATOR (COM)
E INDICATOR
F INDICATOR
G INDICATOR
H INDICATOR
D INDICATOR (COM)
E INDICATOR
F INDICATOR
G INDICATOR
H INDICATOR
10
11
12
13
14
15
F INDICATOR
G INDICATOR
N/A
N/A
N/A
H INDICATOR
1
9
15-PIN D-SUB CONNECTOR
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-18 Page 3
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
TRUTH TABLE Normally Open
CCP-18DX3C-T
Logic
Input
RF Path
Indicator
Switches
1
2
0
1
0
3
0
0
1
J1
J2
J3
E
C
0
F
0
G
0
1
0
0
On Off Off
Off On Off
Off Off On
C
0
0
0
C
TRUTH TABLE Normally Open
CCP-18DX3C-TD
Logic
Input
RF Path
Indicator
Switches
1
2
0
0
1
1
J1
J2
J3
E
C
0
F
0
C
0
0
G
0
0
1
0
1
On Off Off
Off On Off
Off Off On
Off Off Off
0
0
C
0
0
TRUTH TABLE Normally Open
CCP-18DX4C-T
Logic Input
RF Path
Indicator
Switches
1
1
0
0
0
2
0
1
0
0
3
0
0
1
0
4
0
0
0
1
J1 J2 J3 J4
On Off Off Off
Off On Off Off
Off Off On Off
Off Off Off On
E
F
0
G
0
H
0
C
0
0
0
C
0
0
0
C
0
0
0
C
TRUTH TABLE Normally Open
CCP-18DX4C-TD
Logic Input
RF Path
Indicator
Switches
1
0
1
0
1
1
2
0
0
1
1
1
3
0
0
0
0
1
J1 J2 J3 J4
On Off Off Off
Off On Off Off
Off Off On Off
Off Off Off On
Off Off Off Off
E
C
0
0
0
0
F
0
C
0
0
0
G
0
H
0
0
0
C
0
0
C
0
0
CCP-18D Page 4
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
TYPICAL BROADBAND RF PERFORMANCE CURVES
Insertion Loss ( DC-3 GHz )
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
0
0.5
1
1.5
2
2.5
3
Frequency ( GHz )
Isolation ( DC-3 GHz )
0
-20
-40
-60
-80
-100
-120
-140
0
0.5
1
1.5
2
2.5
3
Frequency( GHz )
VSWR ( DC-3 GHz )
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0
0.5
1
1.5
2
2.5
3
Frequency( GHz )
RF NOTES
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-18 Page 5
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
TYPICAL POWER PERFORMANCE CURVE
Power Handling vs. Frequency
3000
2000
1000
800
600
400
300
200
100
80
60
40
30
20
10
3
.1
.2 .3 .4 .6 .8 1
2
Frequency GHz
Estimates based on the following reference conditions:
• Ambient temperature of 40°C or less
• Sea level operation
• Load VSWR of 1.20:1 maximum
• No high-power (hot) switching
Please contact Teledyne Coax Switches for derating factors when applications do not meet the foregoing reference conditions.
CCP-18D Page 6
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
GLOSSARY
Actuator
TD-Option
An actuator is the electromechanical mechanism that This option includes a decoder. The 3-bit parallel command
transfers the RF contacts from one position to another upon is decoded to internally select the appropriate position. See
DC command.
the logic tables. The TD-Option increases the Vsw supply
current demand by 50mA max at 28Vdc and +20°C.
Arc Suppression Diode
A diode is connected in parallel with the coil. This diode Performance Parameters vs Frequency
limits the “reverse EMF spike” generated when the coil de- Generally speaking, the RF performance of coaxial switches
energizes to 0.7 volts. The diode cathode is connected to is frequency dependent. With increasing frequency, VSWR
the positive side of the coil and the anode is connected to and insertion loss increase while isolation decreases. All
the negative side.
data sheets specify these three parameters as “worst case”
at the highest operating frequency. If the switch is to be
used over a narrow frequency band, better performance
Date Code
All switches are marked with either a unique serial number can be achieved.
or a date code. Date codes are in accordance with MIL-
STD-1285 Paragraph 5.2.5 and consist of four digits. Actuator Current vs Temperature
The first two digits define the year and the last two digits The resistance of the actuator coil varies as a function of
define the week of the year (YYWW). Thus, 1032 identifies temperature. There is an inverse relationship between the
switches that passed through final inspection during the operating temperature of the switch and the actuator drive
32nd week of 2010.
current. For switches operating at 28 VDC, the approximate
actuator drive current at temperature, T, can be calculated
using the equation:
Indicator
Indicators tell the system which position the switch is in.
Other names for indicators are telemetry contacts or tellback
circuit. Indicators are usually a set of internally mounted DC
contacts linked to the actuator. They can be wired to digital
input lines, status lights, or interlocks. Unless otherwise
specified, the maximum indicator contact rating is 30 Vdc,
50 mA, or 1.5 Watts into a resistive load.
I
A
I
=
T
[1 + .00385 (T-20)]
Where:
I
I
=
=
Actuator current at temperature, T
T
Room temperature actuator current –
see data sheet
A
Isolation
Isolation is the measure of the power level at the output
connector of an unconnected RF channel as referenced to
the power at the input connector. It is specified in dB below
the input power level.
T
=
Temperature of interest in °C
Magnetic Sensitivity
An electro-mechanical switch can be sensitive to ferrous
materials and external magnetic fields. Neighboring ferrous
Multi-Throw Switch
A multi-throw switch is a switch with one input and three materials should be permitted no closer than 0.5 inches and
or more output ports. The CCP-18 can switch a microwave adjacent external magnetic fields should be limited to a flux
signal to any of 2,3,4,5 or 6 output from a single common density of less than 5 Gauss.
input.
Switching Time
Switching time is the total interval beginning with the arrival
of the leading edge of the command pulse at the switch DC
input and ending with the completion of the switch transfer,
including contact bounce. It consists of three parts: (1)
inductive delay in the coil, (2) transfer time of the physical
movement of the contacts, and (3) the bounce time of the
RF contacts.
TTL Switch Driver Option
As a special option, switch drivers can be provided for both
failsafe and latching switches, which are compatible with
industry-standard low-power Schottky TTL circuits.
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCP-18 Page 7
CCP-18\072013\Q3
Series CCP-18D
Low PIM Multi-Throw DC–3 GHz
Normally Open Coaxial Switch
COAX SWITCHES
NORMALLY OPEN CCP-18D PART NUMBER LIST
PART NO.
PART NO.
1
CCP-18DX3C
43
44
45
46
47
48
49
50
51
52
53
54
55
56
CCP-18DX40
2
CCP-18DX3C-D
CCP-18DX3C-DM
CCP-18DX3C-M
CCP-18DX3C-MS
CCP-18DX3C-S
CCP-18DX3C-T
CCP-18DX3C-TD
CCP-18DX3C-TDM
CCP-18DX3C-TDMS
CCP-18DX3C-TDS
CCP-18DX3C-TM
CCP-18DX3C-TMS
CCP-18DX3C-TS
CCP-18DX30
CCP-18DX40-D
CCP-18DX40-DM
CCP-18DX40-M
CCP-18DX40-MS
CCP-18DX40-S
CCP-18DX40-T
CCP-18DX40-TD
CCP-18DX40-TDM
CCP-18DX40-TDMS
CCP-18DX40-TDS
CCP-18DX40-TM
CCP-18DX40-TMS
CCP-18DX40-TS
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
CCP-18DX30-D
CCP-18DX30-DM
CCP-18DX30-M
CCP-18DX30-MS
CCP-18DX30-S
CCP-18DX30-T
CCP-18DX30-TD
CCP-18DX30-TDM
CCP-18DX30-TDMS
CCP-18DX30-TDS
CCP-18DX30-TM
CCP-18DX30-TMS
CCP-18DX30-TS
CCP-18DX4C
CCP-18DX4C-D
CCP-18DX4C-DM
CCP-18DX4C-M
CCP-18DX4C-MS
CCP-18DX4C-S
CCP-18DX4C-T
CCP-18DX4C-TD
CCP-18DX4C-TDM
CCP-18DX4C-TDMS
CCP-18DX4C-TDS
CCP-18DX4C-TM
CCP-18DX4C-TMS
CCP-18DX4C-TS
*
X = 1 (28Vdc), 2 (15Vdc), 3 (12Vdc) and 4 (24Vdc)
CCP-18D Page 8
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2013 TELEDYNE COAX SWITCHES
CCP-18\072013\Q3
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明