1406504-2 [TE]

Production Torque Wrenches;


型号：	1406504-2
厂家：	TE CONNECTIVITY
描述：	Production Torque Wrenches
文件：	总2页 (文件大小：187K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Instruction Sheet

408-8676

Production Torque Wrenches

27 OCT 14 Rev G

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low

volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Open-End

Wrench Head

Torque Wrench

Protective Cover

PART

NUMBER

WRENCH SIZE

CONNECTIVITY

PART NUMBER

WRENCH DESCRIPTION

PRESET TORQUE

[inches]

1055276-1

1055419-1

1055480-1

1055512-1

1055546-1

1055790-1

1055791-1

1055826-1

1055868-1

1061789-1

1490262-1

2098-0351-54 Production Torque Wrench

2098-5065-54 For SMA (OSM) Type Connectors

2098-5304-54 For OSSM Type Connectors

2098-5619-54 For SMA (OSM) Hermetic Type Connectors

2098-5830-54 Production Torque Wrench Kit

2598-5026-54 For SC/N Type Connectors (Hex Nut Design)

2598-5027-54 For TNC Type Connectors (Hex Nut Design)

2598-5160-54 Production Torque Wrench

2598-5298-54 For TNC Type Connectors (Hex Nut Design)

7098-5031-54 For 7mm Type Connectors

2598-5383-50 Production Torque Wrench

Figure 1

6.4

7.9

1/4

5/16

14 in-lbs ±2 lb

8 in.-lbs +1.5/-.5 lb

5 in.-lbs ±.5 lb

6.4

1/4

7.1

9/32

30 in.-lbs ±2 lb

8 in.-lbs +1.5/-.5 lb

14 in.-lbs ±2 lb

8 in.-lbs +1.5/-.5 lb

14 in.-lbs±2 lb

6.4 and 8.0

20.6

15.9

4.0

1/4 and 5/16

13/16

5/8

5/32

14.3

19.1

7.9

9/16

3/4

14 in.-lbs ±2 lb

15 in.-lbs ±2 lb

5/16

1. INTRODUCTION

These production torque wrenches are used to properly install or disassemble the connectors listed in Figure 1.

Figure 1 also contains the TE part numbers for the wrenches, the previous part numbers for the wrenches,

wrench size, and the preset torque for each wrench.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets], unless otherwise noted.

Reason for revision is provided in Section 5, REVISION SUMMARY.

2. DESCRIPTION

Each production torque wrench contains a protective cover, a torque wrench, and an interchangeable head.

Refer to Figure 2 for the appropriate replacement wrench head part numbers.

The wrenches are designed to be used in the clockwise or counterclockwise direction.

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

1 of 2

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

408-8676

3. OPERATION OF THE WRENCHES

NOTE

If a wrench has not been used recently, move the wrench head back and forth several times, listening for audible "clicks."

Clicking the wrench head back and forth spreads lubricant throughout the internal mechanism to improve wrench

performance.

WRENCH SIZE

TE CONNECTIVITY

PART NUMBER

6.4

[inches]

[1/4]

1406504-1

1406504-2

1406504-3

1406504-4

1406504-5

1406504-6

1406504-7

1406504-8

1406504-9

1-1406504-0

1-1406504-1

1-1406504-2

1-1406504-3

1-1406504-4

1-1406504-5

8.0

[5/16]

[3/8]

9.6

12.8

19.6

11.2

7.1

[1/2]

[3/4]

[7/16]

[9/32]

[13/32]

[11/16]

[9/16]

[11/32]

[5/8]

10.4

17.6

14.6

8.8

16.0

20.8

4.0

[13/16]

[5/32]

[15/64]

6.1

Figure 2

Using the appropriate sized head (Figure 1), turn the wrench clockwise (or counterclockwise) until there is an

audible "click." This "click" indicates that the proper torque has been achieved.

CAUTION

Do NOT over-tighten the connector with the torque wrench. Over-tightening the wrench could result in inaccurate torque

settings.

CAUTION

Do not use or re-terminate damaged connectors.

4. REPLACEMENT

Remove the wrench head by pulling it off the production torque wrench. Then replace the head with the

appropriate head listed in Figure 2.

Order replacement parts through your TE Representative, or call 1-800-526-5142, or send a facsimile of your

purchase order to 717-986-7605, or write to:

CUSTOMER SERVICE (038-035)

TYCO ELECTRONICS CORPORATION

PO BOX 3608

HARRISBURG PA 17105-3608

5. REVISION SUMMARY

 Updated document to corporate requirements

 Added tolerances to table in Figure 1

2 of 2

Rev G

相关型号：