2EDL4 [TE]

Power Entry Module with RFI Power Line Filter for General or Medical Applications; 与一般或医疗应用RFI电源滤波器电源输入模块


型号：	2EDL4
厂家：	TE CONNECTIVITY
描述：	Power Entry Module with RFI Power Line Filter for General or Medical Applications 与一般或医疗应用RFI电源滤波器电源输入模块电源滤波器医疗
文件：	总4页 (文件大小：100K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CORCOM Product Guide

Power Entry Module with RFI Power Line Filter for General

or Medical Applications

L Series

UL Recognized

CSA Certified

VDE Approved

EDL4C/EHL4C

EDL1S/EHL1S

L Series

Voltage Selection

The L series power entry modules are compact units that

combine a multi-function power entry module and high per-

formance RFI filtering capabilities. They are available with

either a four-voltage selector or a DPST on/off switch. Both

variations can be specified with North American or

European fusing capabilities and are available in either

flange or snap-in mounting.

To change selected voltage: disconnect the power cord;

open cover using a small blade screwdriver or similar tool;

insert the tool into the voltage selection slot and remove

wheel from unit; select desired voltage; replace wheel into

unit and close cover, making sure the selected voltage

appears in connector window.

These filters are UL recognized, CSA certified, and VDE

approved. The L series modules offer a choice of filters for

general or medical applications.

Note: All models have North American or dual European fusing capability

and are available in either flange or snap-in mounting.

EDL Models

Voltage

selection

slot

The RFI filter is for general purpose applications where

line-to-line and line-to-ground noise must be controlled.

The filter is designed to meet the very low leakage

requirements of VDE portable equipment. They are

available in three current ratings.

4-Voltage

selection

wheel

Fuseholder

Cover

EHL Models

This medical filter provides susceptibility protection

without the leakage current associated with line-to-ground

capacitors. Designed to allow equipment to meet UL544

for patient care and non-patient care equipment, the EHL

filter has a maximum leakage current of 2 µA at 120 VAC

60 Hz. See Appendix C for more information on medical

applications and UL standards.

Note: When using the models with an IEC connector,

remember that the leakage current of the companion line

cord, GA400, is more significant than that of the filter -

which may disqualify this line cord from use in patient care

applications.

118

Catalog 1654001

Revised 05-07

Dimensions are in inches and

millimeters unless otherwise

specified. Values in italics

are metric equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

USA Cust. Svc.: 1-800-468-2023

CORCOM Prods: 1-847-680-7400

www.corcom.com

www.tycoelectronics.com

Germany:

49-89-6089-0

CORCOM Product Guide

Power Entry Module with RFI Power Line Filter for General

or Medical Applications (Continued)

Specifications

L Series

Electrical Schematics

Maximum leakage current, each line-to-ground:

EDL

Models Models

EHL

DL Models (with switch)

@120 VAC 60 Hz:

@250 VAC 50 Hz:

0.25 mA

0.50 mA

2 µA

5 µA

Cutomer

Note 2

Transformer

Note 1

On/Off

Primaries

Neutral

Ground

Hipot rating (one minute):

line-to-ground

(1) (1a)

1500

1450

1500

1450

line-to-line

(2) (2a)

Device

Hot

Operating frequency:

Operating voltages:

50/60 Hz

1S & 1SC Suffix (fixed):

250 VAC Max.

DL Models (with 4-voltage selection)

Cutomer

Transformer

Primaries

4 & 4C Suffix (selectable): 100, 120, 220, 240 VAC

Rated current:

2EDL & 2EHL

120V

100V

220V

240V

Note 2

20V

Note 1

On/Off

Hot

4EDL & 4EHL

6EL, 6EDL & 6EHL

100V

Ground

Switch:

Double-insulated, rated

for 10,000 operations at full

120V

load. 51 Amp inrush capability.

Neutral

Fuse (not included):

Terminals:

Accepts one .25" x 1.25" fuse

or two 5 x 20 mm fuses

HL Models (with switch)

Customer

Transformer

Primaries

110 [2.79] except for switch

.187 [4.8] for switch

Note 2

On/Off

Note 1

Neutral

Ground

Minimum insertion loss in dB:

(1) (1a)

Line-to-ground in 50 ohm circuit

(2) (2a)

Device

Current

Rating

Frequency-MHz

Hot

.05

.15

EDL Models

HL Models (with 4-voltage selection)

EHL Models

06A

Customer

Transformer

Primaries

120V

100V

220V

240V

Line-to-line in 50 ohm circuit

Note 2

20V

Note 1

On/Off

Hot

Current

Rating

Frequency-MHz

100V

.05

Ground

EDL Models

120V

Neutral

EHL Models

06A

Note 1:

Note 2:

Provision for dual European style fusing.

On/Off switch present only with "S" suffix.

Resistor location for reference only.

119

Catalog 1654001

Revised 05-07

Dimensions are in inches and

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

USA Cust. Svc.: 1-800-468-2023

CORCOM Prods: 1-847-680-7400

www.corcom.com

www.tycoelectronics.com

millimeters unless otherwise

specified. Values in italics

are metric equivalents.

Germany:

49-89-6089-0

CORCOM Product Guide

Power Entry Module with RFI Power Line Filter for General

or Medical Applications (Continued)

L Series

Case Styles — Unfiltered Models

Case Styles — Filtered Models

Flange Models

C D

Side View

.221

5.61

Side View

.221

5.61

.06

1.52

2.201

55.91

2.213

56.21

.020

.508

Snap-In Models

1.122

28.50

1.575

40.00

+.008 -.00

+.203 -.00

Back View

Recommended Panel Cutout

Typical dimensions:

Mounting Holes: .126 [3.20 ] Dia. (2)

All backplate terminals: .110 [2.79 ] terminals, except for switch.

Switch terminals are .187 [4.765 ] Note: Snap-in models allow front mounting only.

Side View

.221

5.61

Snap-In Models

Note: Metric fuse models have additional jumper from filter-to-module.

C D

Case Dimensions

Side View

(max)

.221

5.61

±.015

±.381

Part No.

(max) (max) (max) (max)

.06

1.52

Flange

1.98 1.575

2.3

2.14

1.66

1.11

Unfiltered

Snap-in

Unfiltered

50.29 40.0 58.42 54.36 42.16 28.19

2.201

1.28

32.51

2.3

58.42 54.36 42.16 28.19

2.3 2.14 2.01 1.11

50.29 40.0 58.42 54.36 51.05 28.19

2.14

1.66

1.11

(1)

(2)

—

55.91

2.213

56.21

.020

.508

Flange

Filtered

1.98 1.575

1.122

28.50

Snap-in

Filtered

1.28

32.51

2.3

2.14

2.01

1.11

—

+.008 -.00

+.203 -.00

58.42 54.36 51.05 28.19

Back View

Recommended Panel Cutout

(1) For panel thickness of .031-.079 [0.8-2.0]

(2) For panel thickness of .083-.126 [2.1-3.2]

(3) For snap-in application, the 1.22 [28.5] sides of the cutout must have a .02 [.508] radius on

the installation side.

All backplate terminals: .110 [2.79] terminals, except for switch. Switch terminals are .187 [4.75]

Note: Snap-in models allow front mounting only.

120

Catalog 1654001

Revised 05-07

Dimensions are in inches and

millimeters unless otherwise

specified. Values in italics

are metric equivalents.

Dimensions are shown for

USA Cust. Svc.: 1-800-468-2023

CORCOM Prods: 1-847-680-7400

www.corcom.com

www.tycoelectronics.com

reference purposes only.

Specifications subject

to change.

Germany:

49-89-6089-0

CORCOM Product Guide

Power Entry Module with RFI Power Line Filter for General

or Medical Applications (Continued)

L Series

UNFILTERED MODELS

Part

Current

Rating

Available Voltage

Selection

DPST

On/Off

Switch

Mounting

Style

Fuseholder

Type

Number

Position

6EL1S

6EL1SC

6EL1SM

6EL1SCM

6EL4

6EL4C

6EL4M

6EL4CM

••

Flange

Snap-In

Flange

Snap-In

Flange

Snap-In

Flange

Snap-in

North American

Metric

North American

Metric

FILTERED MODELS

Part

Filter

Type

Current

Rating

Available Voltage

Selection

DPST

On/Off

Switch

Mounting

Style

Fuseholder

Type

Number

Position

2EDL1S

2EDL1SC

2EDL1SM

2EDL1SCM

2EDL4

Linear

Medical

••

Flange

Snap-In

Flange

Snap-In

Flange

Snap-In

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

Flange

Snap-in

North American

Metric

North American

Metric

2EDL4C

2EDL4M

2EDL4CM

4EDL1S

4EDL1SC

4EDL1SM

4EDL1SCM

4EDL4

Metric

••

North American

Metric

North American

Metric

4EDL4C

4EDL4M

4EDL4CM

6EDL1S

6EDL1SC

6EDL1SM

6EDL1SCM

6EDL4

Metric

••

North American

Metric

North American

Metric

6EDL4C

6EDL4M

6EDL4CM

6EHL1S

6EHL1SC

6EHL1SM

6EHL1SCM

6EHL4

6EHL4C

6EHL4M

6EHL4CM

Metric

••

North American

Metric

North American

Metric

• Includes DPST switch

121

Catalog 1654001

Revised 05-07

Dimensions are in inches and

millimeters unless otherwise

specified. Values in italics

are metric equivalents.

Dimensions are shown for

reference purposes only.

Specifications subject

to change.

USA Cust. Svc.: 1-800-468-2023

CORCOM Prods: 1-847-680-7400

www.corcom.com

www.tycoelectronics.com

Germany:

49-89-6089-0

相关型号：