3100-30H9999 [TE]
Definite Purpose Contactor 3-pole, 20-40 FLA AC Coil; 专用接触器3极， 20-40 FLA交流线圈
| 型号： | 3100-30H9999 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Definite Purpose Contactor 3-pole, 20-40 FLA AC Coil |
| 文件： | 总2页 (文件大小：79K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Catalog 1308242
Issued 3-03 (PDF Rev. 3-04)
PRODUCTS UNLIMITED
Model 98 - 3100series
Definite Purpose Contactor
3-pole, 20-40 FLA
AC Coil
File E75492
File EN60947-4-1:1991
IEC 947-4-1
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
• 3-pole contactors.
• Industry-standard mounting plate.
Environm ental Data
Tem perature Range: Storage and Operating: -40°C – +65°C.
Flam m ability: UL 94-HB housing.
• Optional interlock/auxiliary switches available.
• Manual test button is standard.
• Coil dust cover helps keep dust and dirt away from magnet and coil area.
• Double E magnet system provides optimal performance.
Mechanical Data
Contact Term ination:
20, 25, 30 FLA Models
Contact Data @ 25°C
Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects.
Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.)
Tightening Torque: 25 in.-lbs.
Arrangem ents: 3 Form X (3PST-NO-DM).
Maxim um Ratings: See Contact Ratings Table.
Material: Silver Cadmium Oxide.
40 FLA Models
Type: Box Lug with dual 0.250” (6.35 mm) quick connects.
Wire Size: 14-4 Cu/Al AWG
Tightening Torque: 40 in.-lbs.
Coil Term ination: Dual 0.250” (6.35 mm) quick connects, standard.
A 0.250” quick connect and a #6-32 screw, optional.
Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models.
Weight: 16 oz. (455 g) approximately
Coil Data @ 25°C
Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below.
Insulation Class: UL Class B (130°C).
Duty Cycle: Continuous.
Contact Ratings
Full
Load
Am ps
Num ber
of
Poles
Line
Voltage
Locked
Rotor
Am ps
Resistive
Am ps
Rating
Maxim um Horsepow er
Voltage
Single
Phase
Three
Phase
240/277
480
600
120
100
80
30
30
30
110/120
200/240
480/600
1.5
3
-
-
20
3
3
7.5
7.5
110/120
200/208
240/277
480
2
-
5
-
-
240/277
480
600
150
125
100
35
35
35
7.5
10
15
20
25
600
-
110/120
200/208
240/277
480
2
-
5
-
-
240/277
480
600
180
150
120
40
40
40
10
10
15
20
30
40
3
3
600
-
110/120
200/208
240/277
480
3
-
7.5
-
-
240/277
480
600
240
200
160
50
50
50
10
10
20
25
600
-
Coil Data
Nominal Coil Voltage
Maximum Pickup Volts
Drop-Out Volts Range
Nominal Inrush VA @ 50 Hz
Nominal Inrush VA @ 60 Hz
Nominal Sealed VA @ 50 Hz
Nominal Sealed VA @ 60 Hz
Nominal DC Resistance - Ohms
24
18
6 -15
60
53
6.0
5
120
88
20 - 70
60
53
6.0
208/240
177
40 - 140
60
53
6.0
277
220
65 - 185
60
53
6.0
480
384
150 - 270
65
53
6.0
5
180
5
720
5
950
5
7
3100
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
832
Catalog 1308242
Issued 3-03 (PDF Rev. 3-04)
PRODUCTS UNLIMITED
Ordering Inform ation
Typical Part No. B
3100
-
30
Q
9
999
1. Series:
3100 = 3-pole, 20-40 FLA contactor
2.Packaging:
Y = Individual Pack
- = Bulk Pack
A-ZZZ = Customer specific information (assigned by factory)
3.Pole Configuration:
30 = 3 Form X (3PST-NO-DM)
4.Coil Voltage (50/60 Hz.):
Q = 24VAC
U = 208/240VAC H = 480VAC
J = 120VAC, molded
M = 277VAC, molded
T = 120VAC V = 277VAC
I = 24VAC, molded
K = 208/240VAC, molded W = 480VAC, molded
5.Contact Ratings (Inductive):
7 = 20 FLA
8 = 25 FLA
9 = 30 FLA 10 = 40 FLA
6.Custom er ID Suffix:
999 = Standard Model
000-998 = Factory assigned customer ID
A - ZZ = Factory assigned customer-specific options.
7. Option Code:
Leave Blank = No customer-specific options
Standard part num bers listed below are m ore likely to be available from stock.
3100-30Q9999CY
3100-30T9999CY
3100-30U9999CY
3100-30Q10999CG
3100-30T10999CG
3100-30U10999CG
Outline Dim ensions
Term ination Options
2.97
(75.44)
2.00
(50.8)
.250 TYP.
(6.35)
1.78
(45.21)
1.19
(30.23)
3.00
(76.2)
.253
(6.43)
3.25
(82.55)
.203 TYP.
(5.156)
Standard on
Special on
Standard
20, 25, 30, 35 FLA 20, 25, 30, 35 FLA
on 40 FLA
Lug accepts 14-4
Cu/Al AWG
.455 DIA.
(11.56)
3.39
(86.1)
#10-32 Combination
Phillips, Slotted &
5/16 Hex Head
#12 Washer
#10-32 Sems
Screw
with Pressure
Plate
3.75
(95.25)
ORDERING NOTE: “Standard” terminals need not be specified
in the “Ordering Information” chart above. “Special” terminals
are offered on a special order basis. Special order items may be
subject to extended leadtimes and significant minimum order
quantities. Your Tyco Electronics sales engineer must consult
with the factory before providing price and availability
2.0 MAX.
(50.8)
.125
(3.175)
2.375 TYP.
(60.325)
.203 TYP.
(5.156)
Show n w ith Optional Auxiliary Sw itches
information regarding items with these options.
Auxiliary Sw itches
Various interlock / auxiliary switches are available for the Model 98 contactor.
All auxiliary switches for the Model 98 are snap-on design, no tools required.
Equipped w ith 0.250” (6.35) Quick Connect Term inals
Factory Modifications Field Added Kits
Description
Contact Config.
Kit Catalog
Number
Number of
Kits Required
NO
1
NC
0
Single unit interlock
configurations listed.
Maximum of two.
(One on each side.)
98220-303
98220-331
98220-332
98220-303
98220-331
98220-332
98220-337
98220-338
98220-337
98220-338
98220-341
98220-340
98220-340
1
1
1
2
2
2
1
1
2
2
1
1
2
0
1
1
1
2
0
0
2
See footnote (1) for ratings.
SPDT Circuit
(Either one or two
switches per side.)
See footnote (2) for ratings.
SPDT Dry Circuit
2
2
1
1
2
2
2
2
4
4
ONE SPDT
SWITCH
PER SIDE
TWO SPDT
SWITCHES
PER SIDE
1 N/ O / 1 N/ C
1
1
0.1 amp max.
Gold Flashed Contacts
2
2
4
4
Equipped w ith #6-32 Screw Term inals & Saddle Clam ps
Factory Modifications Field Added Kits
Contact Config.
Footnotes: Ratings of Auxiliary Interlocks / Sw itches
(1) Contact Rating Single Circuit NO or NC and two circuit NO/NC:
120V 240V 480V 600V
Description
Kit Catalog
Number
Number of
NO
1
NC
0
Kits Required
Single unit interlock
configurations listed.
Maximum of two.
(One on each side.)
98220-303
98220-331
98220-332
98220-303
98220-331
98220-332
1
1
1
2
2
2
Amperes - Break
Amperes - Make
Amperes - Continuous
3.0
30
10
1.5
15
10
0.75
7.5
10
0.6
6
10
0
1
1
1
2
0
0
2
(2) Contact Rating SPDT (337):
See footnote (1) for ratings.
2
2
10A, 1/3 HP, 125 or 250 VAC
1/2A, 125 VDC; 1/4A, 250 VDC:
4A 120 VAC on Lamp Load
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
833
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明