4-1377174-7 [TE]
Pre-Insulated Diamond Grip;
| 型号： | 4-1377174-7 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Pre-Insulated Diamond Grip |
| 文件： | 总24页 (文件大小：1462K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Introduction
Product Facts
Nylon Insulation.
Nylon sleeve for high dielectric strength.
I
Basic terminal is made of high
conductivity copper, electro
tin plated, for improved cor-
rosion resistance.
Color Coding.
Color-coded by wire size.
I Applicable wire size is
marked on the tongue.
I Inner serrations on the
wire barrel gives maximum
electrical contact and tensile
strength with the conductor.
I Copper sleeve provides
circum-ferential insulation
support to the wire and
allows the wire to be bent
in any direction without
damaging the wire insulation
or conductors.
Insulation Sleeve.
Expanded sleeve, accepts
wide range of wire insulation.
Copper Sleeve.
Copper sleeve to
support wire insulation.
Funnel Entry.
Conical entry for easy wire insertion.
Serrations.
Serrations inside barrel for maximum
contact and tensile strength.
I Insulation sleeves and
corresponding tooling are
color-coded by wire size for
easier identification.
I AMP PIDG Terminals and
Splices meet the require-
ments of MIL-T-7928.
PIDG pre-insulated Diamond
Grip Terminals and Splices are of a tin plated copper body,
Each PIDG terminal consists
In order to obtain the best
termination results it is impor-
tant to select the correct tool.
designed for complete and
uniform reliability. The pre-
insulated termination ensures
a vibration safe connection of
maximum conductivity, and its
tensile strength approaches
that of the wire itself.
with a specially designed
copper sleeve and insulation
sleeve fitted over the terminal
barrel.
I A variety of PIDG terminals
and splices are UL listed
File E 13288 and certified
by CSA File LR 7189.
Each terminal is matched to a
compatible tool. CERTI-CRIMP
hand tools are provided with
a patented ratched device to
ensure the crimp cycle is
completed before releasing.
There is a CERTI-CRIMP tool
available for each terminal
range.
The carefully engineered
application tooling has been
designed for the PIDG pro-
gram to ensure high quality
terminations time after time.
Terminal and insulation sleeve
are crimped simultaneously
resulting in an excellent tensile
strength and vibration resist-
ance.
During crimping dot code is
applied to the insulation sleeve,
to confirm the use of the
correct tooling.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-1
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
AWG Identification Numbers
Cross Reference of AWG Code Numbers to Wire Size Range
The International AWG
Identification Numbers
AWG Code Number
Wire Size Range (mm2)
for DIN Cross Section (mm2)
26–22
22–16
16–14
0.10– 0.40
0.25– 1.60
0.14/0.20/0.25/0.35
Each TE Connectivity Terminal
and Splice covers specific inter-
national wire range and has the
applicable wire size marked on
the tongue or the barrel. Insulated
terminals and splices are color
coded for easy identification. All
application tools have a special
matching control system.
0.35/0.50/0.75/1.00/1.50
1.00– 2.60
1.00/1.50/2.50
1.00/1.50/2.50
4.00/6.00
10.0
,
16–14 HD
1.00– 2.60
12–10
2.70– 6.60
8
6.70– 10.50
6
10.60– 16.70
16.80– 26.60
26.70– 42.40
42.50– 60.50
60.60– 76.20
76.30– 97.00
98.00–120.00
121.00–151.00
152.00–192.00
193.00–242.00
243.00–304.00
16.0
4
25.0
2
35.0
With this technique the quality
of the termination made can be
reliably checked at any time.
During crimping the application
tooling marks a proper visual
code on the terminal or insula-
tion sleeve. If the code of the ter-
minal and the mark of the
1/0
50.0
2/0
70.0
3/0
95.0
4/0
120.0
250–300 MCM
300–350 MCM
400–350 MCM
500–600 MCM
150.0
185.0
240.0
tool are corresponding, a reliable
termination with the correct too-
ling has been made.
300.0
2
,
) Heavy-duty terminals use AWG 12–10 (2.7–6.6 mm ) tooling.
Minimum Number of Wires, Diameter of Conductor for Insulated High Current Conductors
Wire Size Range
(mm2)
Number and Diameter of Wires
(mm)
Diameter of Conductor
(mm)
Wire Size Range
(mm2)
Number and Diameter of Wires
(mm)
Diameter of Conductor
(mm)
1 x 0.42
18 x 0.10
8 x 0.15
1 x 0.50
11 x 0.15
26 x 0.10
1 x 0.60
14 x 0.15
1 x 0.67
7 x 0.26
12 x 0.21
1 x 0.80
7 x 0.30
16 x 0.21
1 x 1.00
24 x 0.20
1 x 1.13
32 x 0.20
1 x 1.38
7 x 0.52
30 x 0.25
1 x 1.78
7 x 0.67
50 x 0.25
1 x 2.26
19 x 0.52
56 x 0.30
1 x 2.26
19 x 0.64
84 x 0.30
1 x 3.57
7 x 1.35
49 x 0.51
80 x 0.40
1 x 4.52
7 x 1.70
49 x 0.65
127 x 0.40
0.42
–
1 x 5.64
5.64
6.40
00.14
7 x 2.13
84 x 0.62
–
025.0
035.0
7.70
0.50
–
200 x 0.40
797 x 0.20
19 x 1.53
7.50
00.20
00.25
7.60
–
7.70
0.60
–
133 x 0.58
280 x 0.40
1115 x 0.20
19 x 1.83
8.70
8.70
0.67
0.80
0.90
0.80
0.90
1.00
1.00
1.20
1.13
1.30
1.38
1.60
1.60
1.78
2.00
2.10
2.26
2.60
2.80
2.26
3.20
3.50
3.57
4.10
4.60
5.00
4.52
5.10
5.90
6.00
0.00
0.00
9.00
00.35
00.50
9.20
133 x 0.69
400 x 0.40
1592 x 0.20
19 x 2.17
10.40
11.00
11.00
11.00
12.70
12.00
12.50
12.60
14.50
14.90
14.90
14.20
16.40
16.00
16.40
15.80
18.00
19.20
19.30
18.00
19.00
20.00
21.00
20.50
22.00
23.00
24.00
23.00
25.00
27.00
50.0
0
189 x 0.69
560 x 0.40
1427 x 0.25
19 x 2.52
0.75
0
070.0
1.00
0
259 x 0.69
485 x 0.50
1936 x 0.25
37 x 2.03
95.0
0
01.50
02.50
04.00
06.00
336 x 0.67
614 x 0.50
2445 x 0.25
37 x 2.26
120.0
150.0
185.0
392 x 0.69
765 x 0.50
2123 x 0.30
37 x 2.52
494 x 0.69
944 x 0.44
2618 x 0.30
61 x 2.24
10.00
16.00
627 x 0.69
1225 x 0.50
3396 x 0.30
61 x 2.50
240.0
300.0
790 x 0.69
1530 x 0.50
37-2
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Ring Tongue Terminals – Nylon
Material and Finish
Tongue
Wire
Dimensions
Part Numbers
Wire Size
Terminal
Insulation
Color
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
AWG
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Tape
Mounted
(mm2)
Min. Max. Max.
Piece
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
2
M2
.203 .211 .632 .739
5.16 5.36 16.05 18.77
.105
2.67
,54310-1,
–
26–24
(0.12–0.24)
.029
0.74
.203 .211 .632 .736
5.16 5.36 16.05 18.69
.105
2.67
,
52189,-0
,54311-1,
321013-0
–
–
Plating:
Tin per ASTM B-545
4
8
M4
.281 .250 .671 .814
7.14 6.35 17.04 20.68
.105
2.67
–
.140 .121 .452 .525
3.56 3.07 11.48 13.34
.082
2.08
–
0
.140 .121 .452 .525
3.56 3.07 11.48 13.34
.082
2.08
2-323912-1
26–22
(0.10–0.41)
.020
0.51
2
M2
.140 .211 .542 .615
3.56 5.36 13.77 15.62
.082
2.08
329951-0
323913-0
–
–
.203 .211 .542 .646
5.16 5.36 13.77 16.41
.082
2.08
–
8
M4
.250 .281 .612 .740
6.35 7.14 15.54 18.80
.082
2.08
2-323916-1
.281 .250 .631 .774
7.14 6.35 16.03 19.66
.100
2.54
323985-0
323986-0
323989-0
323990-0
324158-0
328657-0
327654-0
320882-0
–
–
4
6
M3.5
.281 .250 .631 .774
7.14 6.35 16.03 19.66
.100
2.54
–
24–20
.025
(0.16–0.65)
0.64
8
M4
.312 .281 .662 .821
7.92 7.14 16.81 20.85
.100
2.54
–
.312 .281 .662 .821
7.92 7.14 16.81 20.85
.100
2.54
W
–
10
.182 .172 .576 .669
4.62 4.37 14.63 16.99
.125
3.18
–
2
M2
L
C
.218 .156 .560 .672
5.54 3.96 14.22 17.07
.125
3.18
–
E
.182 .172 .576 .669
4.62 4.37 14.63 16.99
.125
3.18
–
.182 .172 .576 .669
4.62 4.37 14.63 16.99
.140
3.56
2-320882-1
2-320553-2
–
.218 .156 .560 .672
5.54 3.96 14.22 17.07
.125
3.18
4
.218 .156 .560 .672
5.54 3.96 14.22 17.07
.125
3.18
,,36254,,-0
330648-0
–
.250 .312 .716 .844
6.35 7.92 18.19 21.44
.140
3.56
2-330648-1
2-36149-2
2-36150-1
0-051863-1
–
.218 .156 .560 .672
5.54 3.96 14.22 17.07
.125
3.18
22–16
.033
.218 .156 .560 .672
5.54 3.96 14.22 17.07
.140
3.56
36150-0
51863-0
323008-0
326878-0
320554-0
–
(0.26–1.65)
0.84
6
M3.5
.250 .250 .654 .782
6.35 6.35 16.61 19.86
.125
3.18
.312 .281 .685 .844
7.92 7.14 17.40 21.44
.125
3.18
.312 .281 .685 .844
7.92 7.14 17.40 21.44
.140
3.56
–
8
M3.5
.281 .250 .654 .797
7.14 6.35 16.61 20.24
.125
3.18
2-320554-1
2-31887-1
2-36153-2
–
.281 .250 .654 .797
7.14 6.35 16.61 20.24
.140
3.56
.312 .281 .685 .844
7.92 7.14 17.40 21.44
.125
3.18
–
10
.344 .297 .701 .876
8.74 7.54 17.81 22.25
.125
3.18
32836-0
32837-0
.344 .297 .701 .876
8.74 7.54 17.81 22.25
.140
3.56
0-032837-1
,,
,,
Must be crimped with 22–18 or 22–16 PIDG (red) Tooling.
Slightly larger than standard #4 stud hole (.128 in./3.25 mm).
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-3
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Ring Tongue Terminals – Nylon (continued)
Material and Finish
Tongue
Material
Thickness
Max.
Wire
Dimensions
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Size
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Tape
Mounted
(mm2)
Min. Max. Max.
Piece
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
.469 .437 .841 1.078
11.91 11.10 21.36 27.38
.125
3.18
320572
2-320572-1
2-31895-1
–
5/16
M8
.469 .437 .841 1.078
11.91 11.10 21.36 27.38
.140
3.56
Plating:
Tin per ASTM B-545
31895
324123
320573
31897
328975
324159
–
.531 .546 .950 1.218
13.49 13.87 24.13 30.94
.125
3.18
22–16
(0.26–1.65)
.033
0.84
.531 .546 .950 1.218
13.49 13.87 24.13 30.94
.125
3.18
2-320573-4
2-31897-2
–
3/8
.531 .546 .950 1.218
13.49 13.87 24.13 30.94
.140
3.56
1/2
M12
.713 .530 .934 1.293
18.11 13.46 23.72 32.84
.125
3.18
.250 .171 .575 .703
6.35 4.34 14.61 17.86
.150
3.81
2-324159-2
2-328996-1
–
.250 .171 .575 .703
6.35 4.34 14.61 17.86
.170
4.32
4
.250 .281 .685 .813
6.35 7.14 17.40 20.65
.150
3.81
323676
–
.250 .171 .575 .703
6.35 4.34 14.61 17.86
.150
3.81
2-320561-2
0-050881-2
2-326882-1
–
.250 .281 .685 .813
6.35 7.14 17.40 20.65
.170
4.32
50881
326882
36157
–
6
M3.5
W
.312 .250 .654 .813
7.92 6.35 16.61 20.65
.170
4.32
.343 .281 .685 .859
8.71 7.14 17.40 21.82
.150
3.81
L
C
E
.312 .250 .654 .813
7.92 6.35 16.61 20.65
.170
4.32
0-053941-2
2-320560-1
8
M4
.343 .281 .685 .859
8.71 7.14 17.40 21.82
.150
3.81
16–14
(1.04–2.62)
.033
0.84
320560
.312 .250 .654 .813
7.92 6.35 16.61 20.65
.170
4.32
-153942-1 0-053942-2
.343 .281 .685 .859
8.71 7.14 17.40 21.82
.150
3.81
10
320574
324533
320575
328998
320564
–
2-320574-2
.469 .437 .841 1.078
11.91 11.10 21.36 27.38
.170
4.32
–
.469 .437 .841 1.078
11.91 11.10 21.36 27.38
.150
3.81
2-320575-1
5/16
M8
.469 .437 .841 1.078
11.91 11.10 21.36 27.38
.170
4.32
2-328998-1
.531 .546 .950 1.218
13.49 13.87 24.13 30.94
.150
3.81
–
3/8
.531 .546 .950 1.218
13.49 13.87 24.13 30.94
.170
4.32
2-328999-1
1/2
M12
.713 .530 .934 1.293
18.11 13.46 23.72 32.84
.170
4.32
328849
320631
35634
320627
35106
320630
–
.281 .219 .810 .953
7.14 5.56 20.57 24.21
.230
5.84
–
6
M3.5
.281 .219 .810 .953
7.14 5.56 20.57 24.21
.250
6.35
–
,16–14HD,
(1.04–2.62)
.343 .281 .872 1.046
8.71 7.14 22.15 26.57
.230
5.84
.050
1.27
–
8
M4
.343 .281 .872 1.046
8.71 7.14 22.15 26.57
.250
6.35
2-35106-1
2-320630-2
.343 .281 .872 1.046
8.71 7.14 22.15 26.57
.230
5.84
10
,
Heavy duty for extra mechanical strength.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
37-4
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Ring Tongue Terminals – Nylon (continued)
Material and Finish
Tongue
Material
Thickness
Max.
Wire
Dimensions
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Size
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Tape
Mounted
(mm2)
Min. Max. Max.
Piece
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
.500 .344 .935 1.188
12.70 8.74 23.75 30.18
.230
5.84
34974
2-34974-1
1/4
M6
.500 .344 .935 1.188
12.70 8.74 23.75 30.18
.250
6.35
Plating:
Tin per ASTM B-545
323682
34806
34810
330896
35316
36203
322724
35148
320634
35149
326886
–
2-323682-1
.531 .437 1.028 1.296
13.49 11.10 26.11 32.92
.250
6.35
–
5/16
M8
.531 .437 1.028 1.296
13.49 11.10 26.11 32.92
.250
6.35
–
,16–14HD,
(1.04–2.62)
.050
1.27
.531 .437 1.028 1.296
13.49 11.10 26.11 32.92
.230
5.84
3/8
–
.750 .625 1.216 1.594
19.05 15.88 30.89 40.49
.250
6.35
–
1/2
M12
1.250 1.000 1.591 2.219
31.75 25.40 40.41 56.36
.250
6.35
–
1.250 1.000 1.591 2.219
31.75 25.40 40.41 56.36
.250
6.35
3/4
4
–
.281 .219 .810 .953
7.14 5.56 20.57 24.21
.250
6.35
–
.281 .219 .810 .953
7.14 5.56 20.57 24.21
.230
5.84
2-320634-1
W
.281 .219 .810 .953
7.14 5.56 20.57 24.21
.250
6.35
–
6
M3.5
.312 .302 .893 1.052
7.92 7.67 22.68 26.72
.230
5.84
L
C
–
E
.375 .302 .893 1.083
9.53 7.67 22.68 27.51
.250
6.35
2-35107-1
.312 .281 .872 1.031
7.92 7.14 22.15 26.19
.230
5.84
35787
324915
324918
–
1-35787-0
8
M4
.312 .302 .893 1.052
7.92 7.67 22.68 26.72
.230
5.84
–
.312 .302 .893 1.052
7.92 7.67 22.68 26.72
.230
5.84
1-324918-0
.343 .281 .872 1.046
8.71 7.14 22.15 26.57
.230
5.84
12–10
.042
1-32883-0
(2.62–6.64)
1.07
10
.375 .302 .893 1.083
9.53 7.67 22.68 27.51
.230
5.84
36161
329389
35273
320569
35111
320577
35112
35151
–
.500 .344 1.179 1.432
12.70 8.74 29.95 36.37
.220
5.59
–
.500 .344 .935 1.188
12.70 8.74 23.75 30.18
.230
5.84
–
1/4
M6
.531 .468 1.054 1.322
13.49 11.89 26.77 33.58
.230
5.84
–
5/16
M8
.531 .468 1.054 1.322
13.49 11.89 26.77 33.58
.250
6.35
–
.593 .531 1.115 1.414
15.06 13.49 28.32 35.92
.230
5.84
2-320577-3
3/8
.593 .531 1.115 1.414
15.06 13.49 28.32 35.92
.250
6.35
–
–
1/2
M12
.750 .625 1.216 1.594
19.05 15.88 30.89 40.49
.250
6.35
,
Heavy duty for extra mechanical strength.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-5
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Ring Tongue Terminals – Vinyl
Material and Finish
Tongue
Wire
Dimensions
Part Numbers
Wire Size
Terminal
Insulation
Color
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
AWG
Insulation:
Vinyl acc. UL 94 V-0
W
C
E
L
Loose
Tape
Mounted
(mm2)
Min. Max. Max.
Piece
,16–14HD,
(1.04–2.62)
.050
1.27
.343 .281 .961 1.135
8.71 7.14 24.41 28.83
.300
7.62
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
35363
–
10
6
M3.5
.375 .302 .982 1.172
9.53 7.67 24.94 29.77
.300
7.62
Plating:
Tin per ASTM B-545
35604
35605
35364
323763
35345
35346
35478
–
8
M4
.375 .302 .982 1.172
9.53 7.67 24.94 29.77
.300
7.62
2-35605-2
–
W
.375 .302 .982 1.172
9.53 7.67 24.94 29.77
.300
7.62
10
12–10
(2.62–6.64)
.042
1.07
.500 .344 1.024 1.277
12.70 8.74 26.01 32.44
.300
7.62
–
L
C
1/4
M6
E
.531 .468 1.148 1.416
13.49 11.89 29.16 35.97
.300
7.62
2-35345-1
2-35346-1
1-35478-0
5/16
M8
.531 .468 1.148 1.416
13.49 11.89 29.16 35.97
.300
7.62
.593 .531 1.211 1.510
15.06 13.49 30.76 38.35
.300
7.62
3/8
,
Heavy duty for extra mechanical strength.
Note: “C” dimension applies from edge of metal wire barrel to centre of stud hole.
Ring Tongue Terminals – Insulation Restricting
Material and Finish
Tongue
Material
Thickness
Max.
Terminal
Insulation Insulation
Color
Solid/Stripe
Wire
Dimensions
Part Numbers
Wire Size
AWG
Stud
Size
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Piece
Tape
Mounted
Diameter
Range
(mm2)
Min. Max. Max.
Terminal Body:
Copper per ASTM B-152
24
(0.24)
.020
0.51
.203 .211 .587 .691
5.16 5.36 14.91 17.55
.031–.055
0.79–1.40
2-323914-2
52273-2
–
–
–
–
–
–
4
4
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.038–.110
0.97–2.79
Plating:
Tin per ASTM B-545
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.038–.110
0.97–2.79
Metallic Sleeve:
Copper per ASTM B-152
2-36149-3
- 51863-2
1-320551-2
2-36153-3
6
M3.5
22
(0.38)
.033
0.84
.250 .250 .716 .844
6.35 6.35 18.19 21.44
.038–.110
0.97–2.79
Plating:
Nickel per QQ-N-290 or
Tin per ASTM B-545
8
M4
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.038–.110
0.97–2.79
.031
0.79
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.038–.110
0.97–2.79
10
W
Note: “C” dimension applies from edge of metal wire barrel to centre of stud hole.
L
C
E
37-6
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Ring Tongue Terminals – Insulation Restricting (continued)
Material and Finish
Tongue
Material
Thickness
Max.
Terminal
Insulation
Color
Wire
Dimensions
Part Numbers
Wire Size
AWG
Stud
Size
Insulation
Diameter
Range
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Piece
Tape
Mounted
(mm2)
Min. Max. Max.
Solid/Stripe
Terminal Body:
Copper per ASTM B-152
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.046-.110
1.17-2.79
4
52273-1
2-36149-4
51863-3
–
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.046-.110
1.17-2.79
Plating:
Tin per ASTM B-545
–
6
M3.5
.250 .250 .716 .844
6.35 6.35 18.19 21.44
.046-.110
1.17-2.79
–
Metallic Sleeve:
Copper per ASTM B-152
20
(0.60)
.033
0.84
8
M4
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.046-.110
1.17-2.79
1-320551-3
2-36153-4
2-320571-4
2-320572-3
52273-2
–
Plating:
Nickel per QQ-N-290 or
Tin per ASTM B-545
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.046-.110
1.17-2.79
–
10
1/4
M6
.469 .437 .903 1.140
11.91 11.10 22.94 28.96
.046-.110
1.17-2.79
–
5/16
M8
.469 .437 .903 1.140
11.91 11.10 22.94 28.96
.046-.110
1.17-2.79
–
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.056-.110
1.42-2.79
4
–
.218 .156 .622 .734
5.54 3.96 15.80 18.64
.056-.110
1.42-2.79
2-36149-5
51863-4
–
18
.033
6
(0.96)
0.84
M3.5
.250 .250 .716 .844
6.35 6.35 18.19 21.44
.056-.110
1.42-2.79
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.056-.110
1.42-2.79
10
4
2-36153-5
52274-0
.250 .171 .637 .765
6.35 4.34 16.18 19.43
.063-.130
1.60-3.30
6
M3.5
.250 .171 .637 .765
6.35 4.34 16.18 19.43
.063-.130
1.60-3.30
W
2-320561-3
1-51864-0
51864-7
8
M4
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.063-.130
1.60-3.30
16
(1.42)
.033
0.84
L
C
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.063-.130
1.60-3.30
10
E
1/4
M6
.469 .437 .903 1.140
11.91 11.10 22.94 28.96
.063-.130
1.60-3.30
2-320563-3
2-320564-1
2-320561-4
51864-8
.531 .546 1.012 1.280
13.49 13.87 25.70 32.51
.063-.130
1.60-3.30
3/8
.250 .171 .637 .765
6.35 4.34 16.18 19.43
.078-.130
1.98-3.30
6
M3.5
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.078-.130
1.98-3.30
14
(2.15)
.033
0.84
8
M4
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.078-.130
1.98-3.30
1-51864-1
51864-9
.312 .281 .747 .906
7.92 7.14 18.97 23.01
.078-.130
1.98-3.30
10
6
M3.5
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.095-.200
2.41-5.08
2-36161-5
2-320568-2
2-36161-3
2-320569-5
2-36161-6
2-320568-3
2-36161-4
2-320569-6
2-320576-3
8
M4
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.095-.200
2.41-5.08
12
(3.37)
.042
1.07
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.095-.200
2.41-5.08
10
1/4
M6
.531 .468 1.124 1.392
13.49 11.89 28.55 35.36
.095-.200
2.41-5.08
6
M3.5
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.119-.200
3.02-5.08
8
M4
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.119-.200
3.02-5.08
10
(6.11)
.042
1.07
.375 .302 .958 1.148
9.53 7.67 24.33 29.16
.119-.200
3.02-5.08
10
1/4
M6
.531 .468 1.124 1.392
13.49 11.89 28.55 35.36
.119-.200
3.02-5.08
5/16
M8
.531 .468 1.124 1.392
13.49 11.89 28.55 35.36
.119-.200
3.02-5.08
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-7
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Rectangular Tongue Terminals
Material and Finish
Tongue
Material
Thickness Size
Max.
Wire
Dimensions
E
Min. Max. Max.
Part Numbers
Wire Size
Terminal
Insulation
Color
Stud
Insulation
Diameter
Max.
AWG
Insulation:
Nylon acc. UL 94 V-2
W
C
L
X
Loose
Piece
Tape
Mounted
(mm2)
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
except where noted
.237 .404 .810 1.015 .195
6.02 10.26 20.57 25.78 4.95
.140
3.56
327962
2-327956-1
33173
—
4
22–16
(0.26–1.65)
.033
0.84
6
M3.5
.237 .404 .810 1.015 .195
6.02 10.26 20.57 25.78 4.95
.140
3.56
—
—
—
—
—
Plating:
Tin per ASTM B-545
6
M3.5
.244 .312 .716 .856 .125
6.20 7.92 18.19 21.74 3.18
.170
4.32
16–14
(1.04–2.62)
.033
0.84
8
M4
.302 .465 .872 1.109 .227
7.67 11.81 22.15 28.17 5.77
.150
3.81
W
X
2-327946-4
327954
5
M3
.277 .277 .889 1.042 .143
7.04 7.04 22.58 26.47 3.63
.230
5.84
12–10
(2.62–6.64)
.042
1.07
L
C
6
M3.5
.237 .404 .998 1.203 .195
6.02 10.26 25.35 30.56 4.95
.230
5.84
2-327960-1
E
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Spade Tongue Terminals
Material and Finish
Tongue
Material
Thickness Size
Max.
Wire
Insulation
Diameter
Max.
Dimensions
E
Min. Max. Max.
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Insulation:
Nylon acc. UL 94 V-2
W
C
L
X
Loose
Piece
Tape
Mounted
(mm2)
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
except where noted
26–24
(0.12–0.24)
.029
0.74
6
M3.5
.250 .211 .632 .709 .072
6.35 5.36 16.05 18.01 1.83
.095
2.41
–
-
53115-2
26–22
(0.10–0.41)
.020
0.51
.203 .211 .542 .627 .076
5.16 5.36 13.77 15.93 1.93
.082
2.08
321035 2-321035-1
4
Plating:
Tin per ASTM B-545
2
M2
.182 .203 .607 .727 .115
4.62 5.16 15.42 18.47 2.92
.140
3.56
–
2-328394-1
–
.218 .156 .560 .674 .109
5.54 3.96 14.22 17.12 2.77
.125
3.18
W
1-327717-0
4
.218 .156 .560 .674 .109
5.54 3.96 14.22 17.12 2.77
.140
3.56
X
327717
–
C
.297 .203 .607 .753 .141
7.54 5.16 15.42 19.13 3.58
.125
3.18
L
34080
2-34080-1
2-326861-1
–
22–16
(0.26–1.65)
.033
0.84
6
M3.5
E
.297 .203 .607 .753 .141
7.54 5.16 15.42 19.13 3.58
.140
3.56
–
8
M4
.375 .312 .716 .908 .187
9.53 7.92 18.19 23.06 4.75
.125
3.18
32050
.375 .312 .716 .908 .187
9.53 7.92 18.19 23.06 4.75
.125
3.18
32051
2-32051-1
2-32054-1
2-35559-1
2-32060-1
2-326859-1
2-32588-1
–
10
.375 .312 .716 .908 .187
9.53 7.92 18.19 23.06 4.75
.140
3.56
32054
6
.297 .203 .607 .753 .141
7.54 5.16 15.42 19.13 3.58
.170
4.32
–
M3.5
16–14
.033
(1.04–2.62)
0.84
.385 .312 .716 .908 .187
9.78 7.92 18.19 23.06 4.75
.170
4.32
–
10
6
M3.5
.312 .296 .887 1.095 .203
7.92 7.52 22.53 27.81 5.16
.230
5.84
–
.406 .296 .887 1.095 .203
10.31 7.52 22.53 27.81 5.16
.230
5.84
–
12–10
.042
8
(2.62–6.64)
1.07
M4
.406 .296 .887 1.095 .203
10.31 7.52 22.53 27.81 5.16
.250
6.35
35152
–
.406 .296 .887 1.095 .203
10.31 7.52 22.53 27.81 5.16
.230
5.84
2-32589-1
10
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
37-8
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Flanged Spade Tongue Terminals
Material and Finish
Tongue
Wire Size
Terminal
Insu-
lation
Wire
Dimensions
Part Numbers
Material Stud
AWG
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
X
H
Min.
Loose
Tape
Mounted
Thickness Size
Max.
(mm2)
Min. Max. Max.
Piece
Color
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
2
M2
.182 .203 .534 .649 .110 .026
4.62 5.16 13.56 16.48 2.79 0.66
.082
2.08
324597
–
26–22
(0.10–0.41) 0.51
.020
.193 .203 .534 .649 .110 .026
4.90 5.16 13.56 16.48 2.79 0.66
.082
2.08
Plating:
Tin per ASTM B-545
52369
–
–
4
6
.250 .203 .534 .649 .110 .026
M3.5 6.35 5.16 13.56 16.48 2.79 0.66
.082
2.08
0-051874-1
.182 .203 .607 .727 .115 .041
4.62 5.16 15.42 18.47 2.92 1.04
.125
3.18
2-324608-2
324608
–
–
2
M2
.182 .203 .607 .727 .115 .041
4.62 5.16 15.42 18.47 2.92 1.04
.140
3.56
.250 .203 .607 .737 .125 .046
6.35 5.16 15.42 18.72 3.18 1.17
.125
3.18
322777 2-322777-1
22–16
(0.26–1.65) 0.84
.033
6
.296 .203 .607 .737 .125 .046
.125
3.18
–
–
2-32561-1
M3.5 7.52 5.16 15.42 18.72 3.18 1.17
W
.296 .203 .607 .737 .125 .046
7.52 5.16 15.42 18.72 3.18 1.17
.140
3.56
2-32562-1
H
X
.416 .250 .654 .830 .171 .062
10.57 6.35 16.61 21.08 4.34 1.57
.125
3.18
32497
32498
2-320861-2
–
–
8
M4
C
L
.416 .250 .654 .830 .171 .062
10.57 6.35 16.61 21.08 4.34 1.57
.140
3.56
2-32498-1
E
.294 .203 .607 .737 .125 .047
7.47 5.16 15.42 18.72 3.18 1.19
.150
3.81
–
6
M3.5
.294 .203 .607 .737 .125 .047
7.47 5.16 15.42 18.72 3.18 1.19
.170
4.32
2-320861-1
.294 .203 .607 .737 .125 .047
7.47 5.16 15.42 18.72 3.18 1.19
.170
4.32
–
2-320862-1
16–14
.033
(1.04–2.62) 0.84
8
.416 .250 .654 .830 .171 .062
.150
3.81
33155
33156
–
–
M4 10.57 6.35 16.61 21.08 4.34 1.57
.416 .250 .654 .830 .171 .062
10.57 6.35 16.61 21.08 4.34 1.57
.170
4.32
.294 .203 .607 .737 .125 .052
7.47 5.16 15.42 18.72 3.18 1.19
.170
4.32
320863 2-320863-2
10
6
.328 .250 .841 1.017 .171 .052
.230
5.84
324587
32510
—
M3.5 8.33 6.35 21.36 25.83 4.34 1.32
12–10
.042
8
.416 .250 .841 1.017 .171 .052
.230
5.84
2-32510-1
(2.62–6.64) 1.07
M4 10.57 6.35 21.36 25.83 4.34 1.32
.416 .250 .841 1.017 .171 .052
10.57 6.35 21.36 25.83 4.34 1.32
.250
6.35
324015 2-324015-1
10
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-9
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Short Spring Spade Tongue Terminals
Material and Finish
Tongue
Material
Thickness Size
Max.
Terminal
Insu-
lation
Wire
Dimensions
E
Min. Max. Max.
Part Numbers
Loose Tape
Wire Size
AWG
Stud
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
L
X
(mm2)
Piece
Mounted
Color
Terminal Body:
Phosphor Bronze per ASTM B-139
.203 .219 .550 .695 .140
5.16 5.56 13.97 17.65 3.56
.082
2.08
52922
52922-1
4
26–22
.020
(0.10–0.41)
0.51
8
M4
.375 .281 .612 .787 .170
9.53 7.14 15.54 19.99 4.32
.082
2.08
Metallic Sleeve:
Copper per ASTM B-152
52925
52927
52928
52929
–
52925-1
52927-1
52928-1
–
.203 .250 .654 .799 .140
5.16 6.35 16.61 20.29 3.56
.125
3.18
Plating:
Tin per ASTM B-545
4
5
M3
.250 .250 .654 .799 .140
6.35 6.35 16.61 20.29 3.56
.125
3.18
6
M3.5
.250 .250 .654 .799 .140
6.35 6.35 16.61 20.29 3.56
.125
3.18
22–16
(0.26–1.65)
.033
0.84
.244 .281 .725 .895 .170
6.20 7.14 18.42 22.73 4.32
.140
3.56
55768-1
52930-1
52930-3
–
8
M4
.375 .281 .685 .860 .170
9.53 7.14 17.40 21.84 4.32
.125
3.18
52930
–
W
.375 .281 .685 .860 .170
9.53 7.14 17.40 21.84 4.32
.140
3.56
X
.406 .281 .685 .908 .218
10.31 7.14 17.40 23.06 5.54
.125
3.18
52931
52934
52935
-52935-2
–
10
C
L
5
M3
.250 .250 .654 .799 .140
6.35 6.35 16.61 20.29 3.56
.170
4.32
E
52934-1
52935-1
52935-3
52936-1
52936-3
52937-1
52937-3
–
.250 .250 .654 .799 .140
6.35 6.35 16.61 20.29 3.56
.170
4.32
6
M3.5
.250 .250 .654 .799 .140
6.35 6.35 16.61 20.29 3.56
.182
4.62
.375 .281 .685 .860 .170
9.53 7.14 17.40 21.84 4.32
.170
4.32
16–14
(1.04–2.62)
.033
0.84
8
M4
.375 .281 .685 .860 .170
9.53 7.14 17.40 21.84 4.32
.182
4.62
–
.406 .281 .685 .908 .218
10.31 7.14 17.40 23.06 5.54
.170
4.32
52937
10
.406 .281 .685 .908 .218
10.31 7.14 17.40 23.06 5.54
.182
4.62
-
52937-2
1/4
M6
.625 .343 .747 1.033 .281
15.88 8.71 18.97 26.24 7.14
.170
4.32
52939
52942
52945
8
M4
.375 .276 .877 1.052 .170
9.53 7.01 22.28 26.72 4.32
.250
6.35
–
12–10
(2.62–6.64)
.042
1.07
1/4
M6
.625 .338 .939 1.225 .281
15.88 8.59 23.85 31.12 7.14
.250
6.35
–
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
37-10
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Long Spring Spade Tongue Terminals
Material and Finish
Tongue
Material
Thickness Size
Max.
Wire
Dimensions
E
Min. Max. Max.
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
L
X
Loose
Piece
Tape
Mounted
(mm2)
Terminal Body:
Phosphor Bronze per ASTM B-139
6
M3.5
.250 .238 .652 .933 .276
6.35 6.05 16.56 23.70 7.01
.125
3.18
52409
–
52409-1
22–16
(0.26–1.65)
.033
0.84
8
M4
.281 .270 .684 .979 .290
7.14 6.86 17.37 24.87 7.37
.125
3.18
Metallic Sleeve:
Copper per ASTM B-152
52410-1
.343 .283 .697 1.005 .303
8.71 7.19 17.70 25.53 7.70
.125
3.18
Plating:
Tin per ASTM B-545
–
52411-1
10
.250 .238 .652 .933 .276
6.35 6.05 16.56 23.70 7.01
.150
3.81
52420
–
6
M3.5
W
.250 .238 .652 .933 .276
6.35 6.05 16.56 23.70 7.01
.170
4.32
- 52420-1
52421
52420-3
X
16–14
(1.04–2.62)
.033
0.84
8
M4
.281 .270 .684 .979 .290
7.14 6.86 17.37 24.87 7.37
.150
3.81
–
–
–
–
–
–
C
L
.343 .283 .697 1.005 .303
8.71 7.19 17.70 25.53 7.70
.170
4.32
E
- 52422-1
52423
10
1/4
M6
.437 .345 .759 1.102 .338
11.10 8.76 19.28 27.99 8.59
.150
3.81
8
M4
.375 .273 .874 1.174 .295
9.53 6.93 22.20 29.82 7.49
.250
6.35
- 52431-1
- 52432-1
- 52433-1
12–10
(2.62–6.64)
.042
1.07
.375 .305 .906 1.219 .308
9.53 7.75 23.01 30.96 7.82
.250
6.35
10
1/4
M6
.437 .345 .946 1.289 .338
11.10 8.76 24.03 32.74 8.59
.250
6.35
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Slotted Ring Tongue Terminals
Material and Finish
Tongue
Material
Thickness
Max.
Wire
Insulation
Diameter
Max.
Dimensions
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Size
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Piece
Tape
Mounted
(mm2)
Min. Max. Max.
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
26–22
(0.10–0.41)
.020
0.51
6
M3.5
.250 .281 .612 .719
6.35 7.14 15.54 18.26
.082
2.08
323011
36954
2-323011-2
–
22–16
(0.26–1.65)
.033
0.84
8
M4
.281 .250 .654 .770
7.14 6.35 16.61 19.56
.140
3.56
Plating:
Tin per ASTM B-545
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
W
C
L
E
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-11
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Hook Tongue Terminals
Material and Finish
Tongue
Wire
Dimensions
Part Numbers
Wire Size
Terminal
Insulation
Color
Material
Thickness
Max.
Stud
Size
Insulation
Diameter
Max.
AWG
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Tape
Mounted
(mm2)
Min. Max. Max.
Piece
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
16–14
(1.04–2.62)
.033
0.84
8
M4
.343 .281 .685 .859
8.71 7.14 17.40 21.82
.170
4.32
320306
2-320306-1
Plating:
Tin per ASTM B-545
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
W
L
C
E
Offset Ring Tongue Terminal
Material and Finish
Tongue
Material
Thickness
Max.
Wire
Insulation
Diameter
Max.
Dimensions
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Stud
Size
Insulation:
Nylon acc. UL 94 V-2
W
C
E
L
Loose
Piece
Tape
Mounted
(mm2)
Min. Max. Max.
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
22–16
(0.26–1.65)
.033
0.84
6
M3.5
.375 .312 .716 .906
9.53 7.92 18.19 23.01
.125
3.18
323039
–
Plating:
Tin per ASTM B-545
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
W
C
L
E
SHUR-PLUG Terminal 3.96 mm л (.156)
Material and Finish
Part Numbers
Wire Size
AWG
Dimensions
Terminal
Insulation
Color
Wire Insulation
Diameter
Max.
L
Max.
Insulation:
Nylon acc. UL 94 V-2
Loose
Piece
Tape
Mounted
(mm2)
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
16–14
(1.04–2.62)
.790
20.07
.170
4.32
324225
2-324225-1
Plating:
Tin per ASTM B-545
L
37-12
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Tab
Material and Finish
Tongue
Material
Thickness
Max.
Wire
Dimensions
Part Numbers
Wire Size
AWG
Terminal
Insulation
Color
Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
W
C
L
Max.
D
Loose
Piece
Tape
Mounted
(mm2)
Min.
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
22–16
(0.26–1.65)
.033
0.84
.140
3.56
.480
12.19
.904
22.96
.140
3.56
–
34294
–
Plating:
Tin per ASTM B-545
Note: “C” dimension applies from edge of metal wire barrel to end of tab.
Knife Disconnect Splices
Material and Finish
Wire
Insulation
Diameter
Max.
Dimensions
Part Numbers
Wire Size
AWG
Splice
Insulation
Color
Material
Thickness
Insulation:
Nylon acc. UL 94 V-2
W
L
Loose
Piece
Tape
Mounted
(mm2)
Max.
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
.203
5.16
.878
22.30
.125
3.18
320555
32446
320566
32448
320620
35762
–
22–16
(0.26–1.65)
.031
0.79
.203
5.16
.878
22.30
.140
3.56
Plating:
Tin per ASTM B-545
2-32446-1
.203
5.16
.878
22.30
.150
3.81
–
–
–
–
16–14
(1.04–2.62)
.031
0.79
W
.203
5.16
.878
22.30
.170
4.32
.281
7.14
1.234
31.34
.230
5.84
12–10
(2.62–6.64)
.040
1.02
L
.281
7.14
1.260
32.00
.250
6.35
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-13
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Butt Splices
Material and Finish
Part Numbers
Wire Size
AWG
Dimension
L
Max.
Splice
Insulation
Color
Wire Insulation
Diameter
Max.
Insulation:
Nylon acc. UL 94 V-2
Loose-
Piece
Tape
Mounted
(mm2)
,26–24,
(0.12–0.24)
.890
22.61
.082
2.08
Terminal Body and Metallic Sleeve:
Copper per ASTM B-152
2-323994-0
2-323994-2
-320559-0
-320562-0
-320570-0
2-323994-1
26–22
(0.10–0.41)
.890
22.61
.082
2.08
Plating:
Tin per ASTM B-545
–
22–16
(0.26–1.65)
1.265
32.13
.125
3.18
–
16–14
(1.04–2.62)
1.265
32.13
.150
3.81
2-320562-3
–
12–10
(2.62–6.64)
1.656
42.06
.220
5.59
,) 26–24 range in accordance with MIL-T-7928.
Insulated Wire Pins
Wire Size
AWG
Splice
Insulation
Color
Insulation
Diameter
Max.
Dimensions
Part
Number
W
(mm2)
X
W
T
L
.005–.016
(0.14-0.4)
.264
6.7
.043
1.1
.043
1.1
.717
18.2
.083
2.1
0-165514-1
165142
L
X
T
.010–.063
(0.25-1.6)
.264
6.7
.071
1.8
.071
1.8
.776
19.7
.142
3.6
.010–.063
(0.25–1.6)
.390
9.9
.075
1.9
.071
1.8
.902
22.9
.142
3.6
165168
.039–.102
(1.0–2.6)
.264
6.7
.071
1.8
.071
1.8
.799
20.3
.169
4.3
165046
.039–.102
(1.0–2.6)
.390
9.9
.071
1.8
.071
1.8
.929
23.6
.169
4.3
165172
.039–.102
(1.0–2.6)
.598
15.2
.106
2.7
.091
2.3
1.146
29.1
.169
4.3
9-160402-2
165049
.106–.260
(2.7–6.6)
.390
9.9
.102
2.6
.102
2.6
1.122
28.5
.252
6.4
.106–.260
(2.7–6.6)
.598
15.2
.138
3.5
.110
2.8
1.224
31.1
.248
6.3
0-160404-2
37-14
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Cross Reference for Small Packaging
Small Pack
Order
Number
Primary
Package
Quantity
Minimum
Order
Quantity
Standard
Package
Description
140714-3
141460-1
141462-1
165590-1
160215-0
141452-1
141456-1
165429-1
165399-1
165591-1
165400-1
165046-0
165142-0
165172-0
165049-0
165168-0
131330-0
131331-0
151467-0
151469-0
151471-0
9-160402-2
160404-2
165514-1
130207-0
328996-0
323913-0
323914-0
31880-0
.250 SERIES FAST CONNECTOR
3.0 mm DIAMETER PIDG PIN
3.0 mm DIAMETER PIDG PIN
4.0 mm SHUR PLUG
5.0 mm SHUR PLUG
3.0 mm SHUR PLUG REC. ASSY.
3.0 mm SHUR PLUG REC. ASSY.
4.0 mm SHUR PLUG REC. ASSY.
4.0 mm SHUR PLUG REC. ASSY.
4.0 mm SHUR PLUG REC.
SHUR PLUG REC. ASSY.
PIDG WIRE PIN
6-1377174-6
2-1377174-6
2-1377174-4
2-1377174-5
2-1377174-8
3-1377174-1
2-1377174-9
3-1377174-2
5-1377175-5
3-1377174-0
3-1377174-3
1-1377174-3
1-1377174-0
1-1377174-4
1-1377174-7
1-1377174-1
1-1377174-6
1-1377174-2
5-1377175-9
6-1377175-0
6-1377175-1
1-1377174-5
1-1377174-8
0-1377174-9
8-1377173-1
7-1377173-1
6-1377173-2
6-1377173-3
6-1377173-6
7-1377173-2
6-1377173-4
6-1377173-7
7-1377173-3
6-1377173-5
7-1377173-7
6-1377173-8
7-1377173-4
7-1377173-8
6-1377173-9
7-1377173-5
7-1377173-9
7-1377173-0
7-1377173-6
8-1377173-0
10
50
0,200
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
2,000
2,000
2,000
1,000
2,000
2,000
2,000
2,000
2,000
1,000
2,000
1,000
2,000
1,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,000
2,000
2,000
1,000
2,000
2,000
1,000
2,000
2,000
1,000
50
50
50
50
50
50
50
50
50
100
100
100
50
PIDG WIRE PIN
PIDG WIRE PIN
PIDG WIRE PIN ASSY.
PIDG WIRE PIN
100
100
100
100
100
50
PIDG WIRE PIN
PIDG WIRE PIN
PIDG LIPPED BLADE, Red
PIDG LIPPED BLADE, Blue
PIDG LIPPED BLADE, Yellow
PIDG WIRE PIN ASSY.
PIDG WIRE PIN ASSY.
VINYL PIDG WIRE PIN
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
PIDG RING TONGUE
100
50
100
50
100
100
100
100
100
100
100
100
100
50
320619-0
323915-0
36150-0
320565-0
323916-0
35108-0
31890-0
100
100
50
130094-0
130171-0
130008-0
321045-0
165034-0
31894-0
100
100
50
100
100
50
328998-0
160298-0
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-15
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Pre-Insulated Diamond Grip
Chapter 37 – Issued 4-2010.
Cross Reference for Small Packaging (continued)
Small Pack
Order
Number
Primary
Package
Quantity
Minimum
Order
Quantity
Standard
Description
Package
320861
32562
PIDG SPADE FLAG
PIDG SPADE FLAG
PIDG SPADE FLAG
PIDG SPADE FLAG
PIDG SPADE FLAG
PIDG SPADE FLAG
PIDG SPADE END FLAG
PIDG SPADE
0-1377174-1
9-1377173-0
0-1377174-2
0-1377174-7
8-1377173-8
0-1377174-3
0-1377174-8
9-1377173-2
8-1377173-2
8-1377173-4
9-1377173-3
9-1377173-4
8-1377173-3
8-1377173-5
9-1377173-1
9-1377173-7
9-1377173-5
9-1377173-6
0-1377174-4
8-1377173-7
8-1377173-6
9-1377173-8
0-1377174-5
8-1377173-9
9-1377173-9
0-1377174-6
2-1377174-2
1-1377174-9
2-1377174-3
2-1377174-1
2-1377174-0
100
100
100
50
2,000
2,000
2,000
1,000
2,000
2,000
1,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,000
2,000
2,000
2,000
1,000
2,000
2,000
1,000
1,000
2,000
0,500
2,000
2,000
320862
32510
32498
100
100
50
320863
326865
130527
321035
130522
32058
100
100
100
100
100
100
100
100
100
100
100
50
PIDG SPADE
PIDG SPADE
PIDG SPADE
35559
PIDG SPADE
323011
34541
PIDG SPADE
PIDG SPADE
326861
32059
PIDG SPADE
PIDG SPADE
130532
321233
130496
32053
PIDG SPADE TONGUE
PIDG SPADE
PIDG SPADE
PIDG SPADE
100
100
100
50
130517
160170
130620
32054
PIDG SPADE
PIDG SPADE
PIDG SPADE
PIDG SPADE
100
100
50
130537
130625
320562
323994
320570
320559
323975
PIDG SPADE
PIDG SPADE
PIDG BUTT SPLICE
PIDG BUTT SPLICE
PIDG BUTT SPLICE
PIDG BUTT SPLICE
PIDG BUTT SPLICE
50
100
25
100
100
37-16
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Introduction
Product Facts
I Inner serrations on the
wire barrel gives maximum
electrical contact and tensile
strength with the conductor.
Nylon Insulation.
Nylon sleeve for high
dielectric strength.
I Copper sleeve provides
circum-ferential insulation
support to the wire and
allows the wire to be bent
in any direction without
damaging the wire insulation
or conductors.
Color Coding.
Color-coded by wire size.
I Insulation sleeves and
corresponding tooling are
color-coded by wire size for
easier identification.
Copper Sleeve.
Copper sleeve to sup-
port wire insulation.
Insulation Sleeve.
Expanded sleeve,
accepts wide range
of wire insulation.
Serrations.
Serrations inside barrel
for maximum contact and
tensile strength.
Funnel Entry.
Conical entry for easy
wire insertion.
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-17
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Pre-Insulated Receptacles
Pre-Insulated
PIDG-FASTON
Receptacles
Insulation Sleeve:
Nylon acc. UL 94 V-2
Dimensions
(mm)
Part Numbers
Wire Size
Range
Insulation Diameter
For Tab
(mm)
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
2.0 x 0.5
2.8 x 0.3
2.8 x 0.3
2.8 x 0.4
2.8 x 0.4
2.8 x 0.5
2.8 x 0.5
2.8 x 0.5
2.8 x 0.5
2.8 x 0.8
2.8 x 0.8
2.8 x 0.8
4.8 x 0.5
4.8 x 0.5
4.8 x 0.8
4.8 x 0.8
5.0 x 0.8
5.0 x 0.8
5.0 x 0.8
5.0 x 0.8
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
0.14–0.40
0.30–1.50
1.50–2.50
0.30–1.50
1.50–2.50
0.14–0.40
0.20–0.56
0.30–1.50
1.50–2.50
0.14–0.40
0.30–1.50
1.50–2.50
0.30–1.50
1.00–2.50
0.30–1.50
1.00–2.50
0.30–1.00
1.00–1.50
1.00–2.50
3.00–3.40
0.30–1.50
1.00–2.50
4.00–6.00
2.1
3.5
4.3
3.5
4.3
2.1
2.5
3.5
4.3
2.1
3.5
4.3
3.5
4.3
3.5
4.3
3.3
3.3
4.0
4.0
3.5
4.3
6.3
3.0
3.7
3.7
3.7
3.7
3.8
3.7
3.7
3.7
3.7
3.7
3.7
5.6
5.7
5.6
5.7
6.3
6.3
6.3
6.3
7.6
7.6
7.6
16.1
19.8
19.8
19.8
19.8
17.4
18.6
19.8
18.6
17.4
19.8
19.8
21.0
21.9
21.0
21.9
21.6
21.6
21.6
21.6
22.2
23.2
27.2
5.1
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.4
6.3
6.4
7.9
7.9
7.9
7.9
7.7
7.7
7.7
152466-0
165563-1
165614-2
165564-1
165615-2
152462-0
–
–
165563-2
165614-5
165564-2
165615-5
–
,140964-1,
165565-2
165616-5
165619-5
165566-2
165617-5
165565-1
165616-2
165619-2
165566-1
165617-2
9-160481-1-0
9-160477-2-0
9-160483-1-0
9-160479-2-0
140805-2
9-160481-5-0
9-160477-5-0
9-160483-5-0
9-160479-5-0
140948-1
140805-2
140948-1
140802-2
140950-1
140802-2
140950-1
9-160583-2-0
9-160313-2-0
160314-2
9-160583-5-0
9-160313-5-0
160314-5
,) Color: Transparent
37-18
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Fully-Insulated Receptacles
Fully-Insulated
PIDG-FASTON
Receptacles
Insulation Sleeve:
Nylon acc. UL 94 V-2
Dimensions
(mm)
Part Numbers
Wire Size
Range
Insulation Diameter
For Tab
(mm)
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
H
tin plated
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
0.3–1.0
1.0–1.5
0.3–1.0
1.5–2.5
1.0–2.5
3.3
3.3
3.3
4.0
4.0
9.2
9.2
9.2
9.2
9.2
21.6
21.6
21.6
21.6
21.6
7.8
7.8
7.8
7.8
7.8
5.3
5.3
5.3
5.3
5.3
735278
735278
735279
735159
735160
735278-1
735278-1
–
–
–
PIDG-FASTON
Flag Version
Dimensions
(mm)
Part Numbers
Wire Size
Range
Insulation Diameter
For Tab
(mm)
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
0.3–1.5
1.0–2.5
1.5–2.5
3.4
4.0
4.0
7.6
7.6
7.6
18.3
18.3
18.3
15.5
15.5
15.5
156667-1
156666-1
156666-1
–
–
–
PIDG-FASTON
Receptacles
Piggy Back Style
Dimensions
(mm)
Part Numbers
Wire Size
Range
Insulation Diameter
For Tab
(mm)
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
6.3 x 0.8
6.3 x 0.8
0.3–1.5
1.0–2.5
3.5
4.3
7.6
7.6
23.4
23.4
7.7
7.7
9-160834-2
9-160463-2
9-160834-5
9-160463-5
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-19
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Receptacles and Tabs
PIDG – Positive Lock
Receptacle
Low Insertion Force
with Locking Device and
Vibration Resistance
Housing for
Full Protection and
Easy Release
Dimensions
(mm)
Part Numbers
Wire Size
Insulation Diameter
For Tab
(mm)
Range
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
H
–
tin plated
165536-1
154719-0
154719-1
6.3 x 0.8
1.5–2.5
4.8
9.2
9.8
9.8
21.6
24.3
24.3
8.0
5.7
5.7
165536-2
Housing: Neutral
Housing: Black
7.2
7.2
–
–
PIDG-FASTON
Tab
Dimensions
(mm)
Part Numbers
Wire Size
Range
Insulation Diameter
For Tab
(mm)
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
6.3 x 0.8
6.3 x 0.8
6.3 x 0.8
0.5–1.0
1.0–2.5
4.0–6.0
3.3
3.9
5.7
6.3
6.3
6.3
23.5
23.5
28.0
9.4
9.4
9.4
140896-2
140971-2
141085-2
–
–
–
PIDG-FASTON
Receptacles for Automotive
Applications as Head Lights
Dimensions
(mm)
Part Numbers
Wire Size
Insulation Diameter
For Tab
(mm)
Range
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
8.0 x 0.75
1.0–2.5
4.3
9.0
24.4
14.6
9-160326-2
–
PIDG-FASTON
Receptacles for Tab
for Alternators/Bus-Bars
Dimensions
(mm)
Part Numbers
Wire Size
Insulation Diameter
For Tab
(mm)
Range
max.
(mm)
Brass,
Phosphor Bronze,
tin plated
(mm2)
W
L
E
tin plated
9.5 x 1.2
4.0–6.0
6.3
11.0
30.7
11.9
160524-2
160524-4
37-20
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Cross Reference for Small Packaging
Small Pack
Order
Number
Primary
Package
Quantity
Minimum
Order
Quantity
Standard
Description
Package
181949-2
181949-1
140665-0
181948-1
735052-0
925387-1
1-480435-0
735075-0
925068-0
926539-1
926539-5
1-925017-0
2-180930-0
180909-0
41291-0
.250 FASTON TAB
6-1377174-3
6-1377174-2
6-1377174-1
6-1377174-4
7-1377174-3
7-1377174-0
7-1377174-1
7-1377174-6
7-1377174-2
7-1377174-4
7-1377174-5
6-1377174-9
6-1377174-8
6-1377174-7
6-1377174-0
5-1377174-7
5-1377174-4
5-1377174-1
5-1377174-2
5-1377174-3
5-1377174-6
5-1377174-5
5-1377174-8
5-1377174-9
4-1377174-7
3-1377174-5
3-1377174-4
3-1377174-7
3-1377174-6
4-1377174-0
3-1377174-8
3-1377174-9
4-1377174-2
4-1377174-5
4-1377174-9
4-1377174-1
4-1377174-4
4-1377174-8
4-1377174-3
4-1377174-6
5-1377174-0
6-1377174-5
9-1377174-6
8-1377174-2
9-1377174-8
7-1377174-8
50
50
1,000
1,000
1,000
1,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,200
1,000
1,000
1,000
1,000
1,000
2,000
1,000
1,000
1,000
1,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,000
1,000
1,000
200
.250 FASTON TAB
.250 FASTON TAB
50
.250 SERIES FASTON TAB
2.8 FASTON REC. SLEEVE
AMP PIP POD HOUSING
.187 FASTON HOUSING
.250 FASTON REC. SLEEVE
.250 FASTON REC. SLEEVE
.250 FASTON INS. BOOT
.250 P.I. FASTON HOUSING
INSULATION SLEEVE
50
1000
1000
50
50
50
50
50
50
INSULATION CLEAR
50
FASTON CONNECTOR
.250 SERIES FASTON TAB
.250 SERIES FASTON TAB
FASTON TAB
10
50
41480-0
50
140734-1
140814-1
140814-2
141879-1
142241-1
140608-0
141878-1
141878-2
1-160304-8
160625-2
5-160321-2
160626-2
160626-1
5-160491-2
5-160490-1
5-160491-1
5-160506-2
1-160304-2
1-160305-6
5-160506-1
1-160304-0
1-160305-3
5-160506-3
2-160304-4
160305-5
163179-1
165616-5
165565-2
165617-5
165619-5
50
FASTON TAB
50
FASTON TAB
50
.250 FASTON TAB
1000
50
.250 FASTON TAB
.250 FASTON TAB
50
.250 FASTON TAB
50
.250 FASTON TAB
50
.250 SERIES FASTON REC.
.110 SERIES FASTON REC.
.110 SERIES FASTON REC.
.110 SERIES FASTON REC.
.110 SERIES FASTON REC.
.187 SERIES FASTON REC.
.187 SERIES FASTON REC.
.187 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 SERIES FASTON REC.
.250 LINE SPL CONN AS
.110 PIDG FASTON REC.
2.8 PIDG FASTON REC.
110 PIDG FASTON REC.
110 PIDG FASTON REC.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
50
50
50
10
50
1,000
1,000
2,000
1,000
50
1000
50
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-21
Section Catalog 1654376-1
Issued 4-2010.
PIDG-FASTON
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Cross Reference for Small Packaging (continued)
Small Pack
Order
Number
Primary
Package
Quantity
Minimum
Order
Quantity
Standard
Description
Package
165566-2
9-160477-5
9-160481-5
9-160479-5
9-160483-5
140950-1
140948-1
9-160313-5
160314-5
9-160583-5
165614-2
165563-1
165615-2
165564-1
165616-2
165565-1
165617-2
165619-2
165566-1
9-160477-2
9-160481-1
9-160479-2
9-160483-1
140802-2
140805-2
9-160313-2
160314-2
9-160583-2
9-160326-2
160524-2
9-160463-5
160834-5
9-160463-2
160834-2
735278-1
735279-0
735278-0
735160-0
735159-0
140971-2
141085-2
140896-2
156667-1
156666-1
165536-2
165536-1
.110 PIDG FASTON REC.
.187 PIDG FASTON REC.
.187 PIDG FASTON REC.
.187 PIDG FASTON REC.
.187 PIDG FASTON REC.
.197 PIDG FASTON REC.
.197 PIDG FASTON REC.
.250 PIDG FASTON REC.
.250 PIDG FASTON REC.
.250 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
2.8 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
.110 PIDG FASTON REC.
.187 PIDG FASTON REC.
4.8 PIDG FASTON REC.
.187 PIDG FASTON REC.
4.8 PIDG FASTON REC.
.197 PIDG FASTON REC.
.197 PIDG FASTON REC.
.250 PIDG FASTON REC.
.250 FASTON
8-1377174-4
0-1377175-1
8-1377174-6
0-1377175-3
8-1377174-8
0-1377175-5
9-1377174-0
0-1377175-7
1-1377175-0
9-1377174-2
9-1377174-3
7-1377174-9
9-1377174-4
8-1377174-0
9-1377174-5
8-1377174-1
9-1377174-7
7-1377174-7
8-1377174-3
9-1377174-9
8-1377174-5
0-1377175-2
8-1377174-7
0-1377175-4
8-1377174-9
0-1377175-6
0-1377175-9
9-1377174-1
0-1377175-8
1-1377175-1
2-1377175-2
2-1377175-0
2-1377175-1
1-1377175-9
1-1377175-3
1-1377175-4
1-1377175-2
1-1377175-5
1-1377175-6
2-1377175-4
2-1377175-5
2-1377175-3
1-1377175-7
1-1377175-8
2-1377175-7
2-1377175-6
50
1000
1000
1000
1000
1000
1000
1000
50
1,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,000
2,000
2,000
1,000
2,000
1,000
1,000
1,000
2,000
1,000
1,000
2,000
1,000
2,000
1,000
2,000
2,000
2,000
1,000
2,000
2,000
1,000
1,000
2,000
1,000
1,000
2,000
1,000
2,000
2,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1000
1000
50
1000
50
50
50
1000
50
50
1000
50
1000
50
1000
1000
1000
50
.250 PIDG FASTON REC.
.312 PIDG FASTON REC.
.375 PIDG FASTON REC.
6.3 P.B.FASTON REC.
1000
1000
50
50
PIDG PIGGY-BACK FASTON
PIDG PIGGY-BACK FASTON
PIDG PIGGY-BACK FASTON
.250 PIDG F.I.F. REC.
1000
50
50
1000
50
.250 PIDG F.I.F. REC.
.250 PIDG F.I.F. REC.
1000
1000
50
.250 PIDG FASTON REC.
6.3 F.I.F. REC.
PIDG TAB
50
.250 PIDG FASTON TAB
.250 PIDG FASTON TAB
PIDG FL. FASTON REC.
PIDG FL. FASTON REC.
PIDG POSITIVE LOCK ASSY.
PIDG POSITIVE LOCK ASSY.
50
50
50
50
50
50
37-22
All specifications subject to change. Consult TE Connectivity for latest specifications.
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Application Tooling
Hand Tooling for PIDG
Terminals and Splices
Wire Size
Part
Number
Instruction
Sheet
Tool Grade
Description
(mm2)
0.4–6.0
0.1–0.4
4.0–6.0
0.5–1.5
1.5–2.5
(AWG)
22–10
26–22
12–10
22–16
16–14
SUPER CHAMP II
0-0169060-8
–
–
Die-Set – Service Kit Tool
, 3-1579016-1,
Service
Die-Set – Service Kit Tool
, 3-1579016-2,
–
Commercial
0.4–6.0
0.15–0.40
0.4–1.5
22–10
26–22
22–16
16–14
22–10
SDE PRO-CRIMPER III (Tool & Die-Set)
0-0 58433-3
46121
408-9252
408-1559
408-1559
408-1559
408-2823
Double Action Hand Tool (DAHT)
47386
Premium
1.5–2.5
47387
0.4–6.0
TETRA-CRIMP Hand Tool
0-0 59824-1
12–10
0-0 59239-4
0-0 59287-2
4.0–6.0
Heavy Head Hand Tool (HHHT)
408-1261
HD 16–14 HD
,) Use in Hand Tool, Part No. 3-1579000-0.
Find the latest tooling and equipment options and alternatives including powered at
http://www.tooling.tycoelectronics.com/europe/handtool.stm
All specifications subject to change. Consult TE Connectivity for latest specifications.
37-23
Section Catalog 1654376-1
Issued 4-2010.
PIDG
Main Catalog 1654400-1
Chapter 37 – Issued 4-2010.
Engineering Notes
37-24
All specifications subject to change. Consult TE Connectivity for latest specifications.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明