6VM1S [TE]
Power Entry Module with Optional RFI Power Line Filters for General and Medical Applications; 与可选的RFI电源线电源输入模块过滤器一般和医疗应用型号: | 6VM1S |
厂家: | TE CONNECTIVITY |
描述: | Power Entry Module with Optional RFI Power Line Filters for General and Medical Applications |
文件: | 总8页 (文件大小:304K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications
M Series
XM/ZM
UL Recognized
CSA Certified
VDE Approved
VM
FM Models – General purpose RFI filter designed for sus-
M Series
ceptibility applications, effectively providing RFI control of
line-to-ground noise. The design is compact and meets
the very low leakage current requirements of VDE portable
equipment as well as (120 Volt) UL544 non-patient medical
equipment.
The M series power entry modules offer the most choices
of power entry components and filtering options to fit a
specific need. The fully configured M series expands the
options of a manufacturer whose products are marketed
worldwide. One component, fully assembled and tested,
provides the capability of interfacing a multi-voltage power
supply to any common voltage or fusing scheme in the
world, without modification.
XM Models – High performance RFI filter designed to bring
most digital equipment (including switching power
supplies) into compliance with FCC Part 15J, Class B
conducted emissions limits.
• The IEC connector provides an internationally accepted
power entry termination, which can be used with a variety
of line cords.
ZM Models – Premium RFI filter designed to bring most
digital equipment (including switching power supplies) into
compliance with EN55022, Level B (as well as FCC Part
15J, Class B) conducted emissions limits.
• The selectable fuseholder allows use of single or dual
European fuses, or a single North American fuse.
• The optional DPST on/off switch breaks both sides of the
line and is labeled with the international I/O markings.
Fuse Installation Instructions
• The optional voltage selector provides a convenient
means to change transformer primary connection,
and it is available in both 2-voltage and 4-voltage
configurations.
• The series is available with four filter circuits to meet a
variety of applications, and convenient connections are
provided on unfiltered models to allow wiring of a
separate RFI filter.
The M series is a family of components offering greater
flexibility and cost-effectiveness in the selection of primary
power components. Wiring to the modules is accom-
plished via .110” terminals for labor savings and
convenience.
Four filter circuits provide a choice of attenuation tailored to
specific categories of susceptibility and emissions needs.
1. Remove power cord.
2. Pry door open at socket.
HM Models – This medical filter provides susceptibility
protection without the leakage current associated with
line-to-ground capacitors. Designed to allow equipment
to meet UL544 for patient care and non-patient care
equipment, the HM filter has a maximum leakage current
of 2 µA at 120 VAC 60 Hz. See Appendix C for more
information on medical applications and UL standards.
3. Lift and swing door into socket.
4. Lift fuse holder out of housing.
5. Install one (1) AG fuse or two (2) metric fuses*.
6. Replace fuse holder into housing.
7. Swing and snap door back in place.
*Install fuses on one side only, do not install both AG and metric fuses at the
same time.
124
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
Removing the Fuse Holder
Fuse Options
European Fusing Arrangement**
1. Insert a pocket screwdriver at point “X” as shown.
"X"
A
A
Section A-A
North American Fusing Arrangement**
Gently lift UP until the entire door lifts up approximately
1/4" (minimum).
Lift Up
2. Once lifted, the door will pivot on it’s hinges and
expose the fuse holder.
**Install fuses on one side only. Do Not install both AG and Metric fuses at
the same time.
Voltage Selection
To change selected voltage: open cover, using small
blade screwdriver or similar tool; set aside cover/fuse
block assembly; pull voltage selector card straight out of
housing, using indicator pin; orient selector card so that
desired voltage is readable at the bottom; orient indicator
pin to point up when desired voltage is readable at bottom
(note that when indicator pin is fixed, successive voltages
are selected by rotating the card 90° clockwise); insert
voltage selector card into housing, printed side of card
facing forward toward IEC connector and edge containing
the desired voltage first; replace cover, and verify that
indicator pin shows the desired voltage.
3. When the fuse holder is installed in the single fuse
position, apply the screwdriver as shown and gently
pry up. Use screwdriver as shown, do not use fingers.
Voltage Selector Card Orientation
When the fuse holder is installed in the dual fuse
position, it will normally release as soon as the
door is opened.
4
2
3
2
0
1
0
0
1
2
120V
100V
1
0
0
2
3
0
0
2
4
230V
240V
125
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
Specifications
Electrical Schematics – Unfiltered Models
Maximum leakage current,each line-to-ground
VM (1-Voltage)
HM
2µA
5µA
FM
.25 mA
.50 mA
XM/ZM
.30 mA
.50 mA
Power On/Off
Note 3
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
Hipot rating (one minute):
line-to-ground:
K
K
Neutral
Note 2
1500 VAC
1450 VDC
2500 VAC
50/60 Hz
line-to-line
line-to-load (switch off) Unfiltered only
120V
L
L
Hot
Customer
GG
Operating frequency:
Transformer Primaries
Rated voltage (max.):
250 VAC
VM (2-Voltage)
Operating voltages:
Switch:
100, 120, 220/ 240 VAC
240V
120V
Power On/Off
Note 3
A
Double-insulated, rated for
100,000 operations at full load
at 70 Amps inrush current.
A
120V
B
D
H
B
K
120V
Neutral
Note 2
Note 1
C
D
C
Fuse (not included):
Terminals:
Reversible fuseholder, accepts
one 1/4" x 1-1/4" fuse
120V
E
F
E
F
120V
Hot
J
F
L
or two 5 x 20 mm fuses
Note 1
Note 4
G
Customer
Transformer Primaries
.110 [2.79] terminals
Minimum insertion loss in dB:
VM (4-Voltage)
Line-to-ground in 50 ohm circuit
120V
100V
230V
240V
Current
Rating
Frequency-MHz
Power On/Off
Note 3
20V
A
A
.01 .05 .15
.5
1
5
10 30
100V
H
B
K
Neutral
HM
5A
FM
05A
XM
3A
Note 2
Note 1
C
D
C
D
-
-
-
-
14
14
23
39
18
21
40
46
19
26
46
43
22
40
44
40
22 17
45 40
44 44
40 40
E
F
E
F
120V
J
L
Hot
Note 1
2
13
29
Customer
Transformer Primaries
G
ZM
3A
15
Note 1:
Note 2:
Note 3:
Note 4:
Jumpers required if no input filter is used.
Provision for dual European style fusing.
On/off switch present only with "S" suffix.
When using a center-tapped transformer, the C-F winding should
be the low voltage (high current) winding and must be capable of
handling the full primary current in the 120V position.
Line-to-line in 50 ohm circuit
Current Frequency-MHz
Rating .02 .03 .05 .07 .15 .5
XM
03A
ZM
3A
1
5
10 30
-
-
-
5
34 62 68 60 50 40
5
13 28 37 55 75 75 62 54 44
126
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
Electrical Schematics - Filtered Models
Case Styles – Unfiltered Models
6VM1 (IEC Connector, Selectable Fuseholder)
FM & HM (1-Voltage)
Power On/Off
Note 2
USE ONLY WITH
250V FUSES
H
B
Neutral
C
Note 1
DISCONNECT POWER
BEFORE REPLACING FUSES
Note 3
E
D
B
A
J
F
Phase
G
6VM1C (IEC Connector, Selectable Fuseholder, Snap-in)
FM & HM (4-Voltage)
USE ONLY WITH
250V FUSES
C
120V
100V
230V
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
20V
Power On/Off
Note 2
A
B
A
100V
H
K
Neutral
Phase
Note 1
Note 4
D
A
E
C
D
C
D
Note 3
E
F
E
F
120V
J
L
Note 4
6VM1S (IEC Connector, DPST On/Off Switch, Selectable
G
Customer
Transformer Primaries
Fuseholder)
XM & ZM (1-Voltage)
USE ONLY WITH
250V FUSES
C
Power On/Off
DISCONNECT POWER
BEFORE REPLACING FUSES
Note 2
H
B
Neutral
Note 1
E
D
B
A
J
F
Phase
6VM1SC (IEC Connector, DPST On/Off Switch,
G
Selectable Fuseholder, Snap-In)
XM & ZM (4-Voltage)
USE ONLY WITH
250V FUSES
C
120V
100V
230V
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
20V
Power On/Off
Note 2
A
B
A
Note 4
100V
H
K
Neutral
D
A
E
Note 1
C
D
C
D
E
F
E
F
120V
Phase
J
L
Recommended Panel Cutout (Snap-In Only)
Note 4
G
Customer
Transformer Primaries
0.13
R
3.30
Note 1: Provision for dual fusing (Euro standard)
Note 2: Power on/off switch with suffix "S" only
Note 3: HM models without line-to-ground capacitors
1.145
29.08
Note 4: Models HM4, FM4, XM4, and ZM4 have added terminals K and L.
External switch or jumper must be placed from K to H and L to J.
230V Nomenclature relates to pending European CENELEC agreement.
F
Typical dimensions:
Mounting Holes: .155 [3.94] Dia. (2) with .279 [7.09] Dia. x 82˚ Countersunk.
All mounting holes countersunk.
Panel Thickness: .06 - .09 [1.53 -2.29]
127
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany: 49-89-6089-0
www.corcom.com
www.tycoelectronics.com
reference purposes only.
Specifications subject
to change.
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
Case Styles - Unfiltered Models (cont'd)
Case Styles - Filtered Models
6VM2 & 6VM4 (IEC Connector, Voltage Selector,
3EXM1S & 3EZM1S (IEC Connector, DPST On/Off
Selectable Fuseholder)
Switch, Selectable Fuseholder)
G
Thread
100V
USE ONLY WITH
120V
6-32 x 1/4
250V FUSES
230V
240V
C
DISCONNECT POWER
BEFORE REPLACING FUSES
1.13±.020
28.7±.508
1.88±.020
3.09
78.49
E
D
B
A
Max.
47.8±.508
USE ONLY WITH
250V FUSES
C
DISCONNECT POWER
BEFORE REPLACING FUSES
D
B
A
E
6VM4C (IEC Connector, Voltage Selector, Selectable
Fuseholder, Snap-In)
100V
120V
USE ONLY WITH
250V FUSES
230V
C
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
D
E
A
3EXM4 & 3EZM4 (IEC Connector, Voltage Selector,
Selectable Fuseholder)
G
Thread
6-32 x 1/4
6VM2S & 6VM4S (IEC Connector, DPST On/Off Switch,
Voltage Selector, Selectable Fuseholder)
1.13±.020
28.7±.508
1.88±.020
3.09
78.49
Max.
100V
47.8±.508
USE ONLY WITH
120V
250V FUSES
230V
240V
C
100V
120V
230V
240V
USE ONLY WITH
250V FUSES
DISCONNECT POWER
BEFORE REPLACING FUSES
C
DISCONNECT POWER
BEFORE REPLACING FUSES
D
B
A
E
D
B
A
E
6VM4SC (IEC Connector, DPST On/Off Switch, Voltage
Selector, Selectable Fuseholder, Snap-In)
3EXM4S & 3EZM4S (IEC Connector, DPST On/Off
Switch, Voltage Selector, Selectable Fuseholder)
100V
USE ONLY WITH
250V FUSES
120V
230V
240V
C
DISCONNECT POWER
BEFORE REPLACING FUSES
G
Thread
6-32 x 1/4
B
A
E
1.17±.020
29.7±.508
1.88±.020
3.09
Max.
47.8±.508
78.49
100V
120V
230V
240V
USE ONLY WITH
250V FUSES
C
DISCONNECT POWER
BEFORE REPLACING FUSES
D
B
A
E
128
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
reference purposes only.
Specifications subject
to change.
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
5EHM4 & 5EFM4 (IEC Connector, DPST On/Off Switch,
Selectable Fuseholder)
Case Styles - Filtered Models (cont'd)
5EHM1 & 5EFM1 (IEC Connector, Selectable
Fuseholder)
100V
USE ONLY WITH
120V
250V FUSES
C
230V
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
USE ONLY WITH
250V FUSES
C
E
DISCONNECT POWER
BEFORE REPLACING FUSES
D
B
A
E
D
B
A
5EFM4C (IEC Connector, Voltage Selector, Selectable
Fuseholder)
5EFM1C (IEC Connector, Selectable Fuseholder)
100V
USE ONLY WITH
250V FUSES
USE ONLY WITH
250V FUSES
120V
230V
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
DISCONNECT POWER
BEFORE REPLACING FUSES
A
C
D
A
D
C
E
E
5EHM1S & 5EFM1S (IEC Connector, DPST On/Off
Switch, Selectable Fuseholder)
5EHM4S & 5EFM4S (IEC Connector, DPST On/Off
Switch, Voltage Selector, Selectable Fuseholder)
USE ONLY WITH
250V FUSES
100V
C
USE ONLY WITH
120V
DISCONNECT POWER
BEFORE REPLACING FUSES
250V FUSES
C
230V
240V
DISCONNECT POWER
BEFORE REPLACING FUSES
E
D
B
A
E
D
B
A
5EFM1SC (IEC Connector, DPST On/Off Switch,
Selectable Fuseholder)
USE ONLY WITH
250V FUSES
DISCONNECT POWER
BEFORE REPLACING FUSES
A
C
D
Typical dimensions:
Torque: 7 in. lb max.
Holes: .055 [1.40] Dia. ±.004 [±.10] except solder lug ground tap with wire wrap.
Mounting Holes: .155 [3.94] Dia.
All parts typical.
Note: Mounting holes on tabs are countersunk and take a #6 flathead screw.
E
129
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
Case Styles - Filtered Models (cont'd)
Case Dimensions
5EFM4SC (IEC Connector, DPST On/Off Switch, Voltage
Selector, Selectable Fuseholder)
A
B
C
D
E
F
G
Part No.
(max) ±0.01 (max) (max) (max)
±0.038
3EXM1S
3EZM1S
3EXM4
3EZM4
4.17 3.62 1.14 3.22 1.72 3.28 3.3
105.9 91.9 29.0 81.8 43.7 83.8 83.8
3.88 3.32 1.14 2.92 1.72 2.98 2.99
98.6 84.3 29.0 74.2 43.7 75.7 75.9
100V
120V
USE ONLY WITH
250V FUSES
230V
DISCONNECT POWER
BEFORE REPLACING FUSES
240V
3EXM4S
3EZM4S
5EFM1
4.65 4.1
1.14 3.72 1.72 3.76 3.8
A
C
118.1 104.1 29.0 94.5 43.7 95.5 96.5
3.39 2.84 1.14 2.44 2.19 2.5
86.1 72.1 29.0 62.0 55.6 63.5
D
—
5EHM1
2.56
65.0
1.14 2.44 2.19 2.49
29.0 62.0 55.6 63.2
5EFM1C
—
—
—
—
—
—
—
—
E
5EFM1S
5EHM1S
4.17 3.62 1.14 3.22 2.19 3.28
105.9 91.9 29.0 81.8 55.6 83.3
3.34
84.8
3.88 3.32 1.14 2.92 2.19 2.98
98.6 84.3 29.0 74.2 55.6 75.7
3.04
77.2
4.65 4.1
118.1 104.1 29.0 94.0 55.6 95.5
3.82
97.0
1.14 3.27 2.19 3.27
29.0 83.1 55.6 83.1
5EFM1SC
—
5EFM4
5EHM4
1.14 2.92 2.19 2.97
29.0 74.2 55.6 75.4
1.14 3.7 2.19 3.76
5EFM4C
—
5EFM4S
5EHM4S
Recommended Panel Cutout
1.14 3.7 2.19 3.75
29.0 94.0 55.6 95.3
5EFM4SC
—
*Blind insert
XM and ZM
Models only
3.39 2.84 1.14 2.44 1.45 2.5
86.1 72.1 29.0 62.0 36.8 63.5
6VM1
+
1.17 .020
*4S Models
+
+
1.88 .020
29.7 .508
2.56
86.1
1.14 2.44 1.45 2.5
29.0 62.0 36.8 63.2
+
6VM1C
6VM1S
6VM1SC
—
47.8 .508
+
1.13 .020
*1S & 4 models
+
28.7 .508
0.13
3.30
4.17 3.62 1.14 3.22 1.45 3.28
105.9 91.9 29.0 81.8 36.8 83.3
R
.570
14.5
1.145
29.08
Holes (2)
.170
3.34
84.8
1.14 3.27 1.45 3.27
29.0 83.1 36.8 83.1
—
Dia.
4.32
.175
4.45
6VM2
6VM4
3.88 3.32 1.14 2.92 1.45 2.98
98.6 84.3 29.0 74.2 36.8 75.7
F
B
3.04
98.6
1.14 2.92 1.45 2.97
29.0 74.2 36.8 75.4
1.14 3.72 1.45 3.76
6VM4C
—
Note: Snap-in models allow front mount only.
XM and ZM models allow back mount only.
FM and HM models allow front or back mounting.
6VM2S
6VM4S
4.65 4.1
118.1 104.1 29.0 94.5 36.8 95.5
3.82
97.0
Accessories for M series include interconnection assembly, medical standoff
bracket, voltage selector cards, and insulating shroud. See page 142.
1.14 3.7 1.45 3.75
29.0 94.0 36.8 95.3
6VM4SC
—
All mounting holes countersunk.
130
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
reference purposes only.
Specifications subject
to change.
Germany:
49-89-6089-0
CORCOM Product Guide
Power Entry Module with Optional RFI Power Line Filters for General and
Medical Applications (Continued)
M Series
FILTERED MODELS
RFI
Current Rating Current Rating Available Voltage
DPST
On/Off
Switch
Part
Mounting
Style
Filter
Type
@120VAC
(Amps)
@250VAC
(Amps)
Selection
Number
Positions†
3EXM1S
3EXM4
3EXM4S
3EZM1S
3EZM4
SMPS FCC-B1
SMPS FCC-B1
3
3
3
3
3
3
2
2
2
2
2
2
1
4
4
1
4
4
••
Flange
Flange
Flange
Flange
Flange
Flange
SMPS FCC-B1
••
••
SMPS EN55022-B2
SMPS EN55022-B2
SMPS EN55022-B2
3EZM4S
••
5EHM1
5EHM1S
5EHM4
Medical3
5
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
1
1
4
4
1
1
1
1
4
4
4
4
Flange
Flange
Flange
Flange
Flange
Snap-in
Flange
Snap-in
Flange
Snap-in
Flange
Snap-in
Medical3
••
••
Medical3
5EHM4S
Medical3
5EFM1
General Purpose‡
General Purpose‡
General Purpose‡
General Purpose‡
General Purpose‡
General Purpose‡
General Purpose‡
General Purpose‡
5EFM1C
5EFM1S
5EFM1SC
5EFM4
5EFM4C
5EFM4S
5EFM4SC
••
••
••
••
• Includes DPST switch
UNFILTERED MODELS
Current Rating
Current Rating
Available Voltage
DPST
On/Off
Switch
Part
Number
Mounting
Style
@120VAC
250VAC
(Amps)
Selection
(Amps)
Position†
6VM1
6VM1C
6VM1S
6VM1SC
6VM2
6VM2S
6VM4
6VM4C
6VM4S
6VM4SC
6
6
6
6
6
6
6
6
6
6
6
6
4
4
6
6
6
6
4
4
1
1
1
1
2
2
4
4
4
4
Flange
Snap-in
Flange
Snap-in
Flange
Flange
Flange
Snap-in
Flange
Snap-in
••
••
••
••
••
• Includes DPST switch
†
1-120V/240V Fixed, 2 - 120/240V Selectable, 4- 100, 120, 230, 240V selectable
Emissions filter for switching power supply applications where FCC-B level requirements must be met
Emissions filter for switching power supply applications where En5502-B level requirements must be met
1
2
3 Medical filter for very low leakage UL544, UL2601 and EN60601 health care applications
‡ General purpose filer for susceptibility applications
131
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
www.corcom.com
www.tycoelectronics.com
Germany:
49-89-6089-0
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明