7-1904094-0 [TE]
Plug-in or PCB terminals;
| 型号： | 7-1904094-0 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Plug-in or PCB terminals PC |
| 文件： | 总4页 (文件大小：481K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
n
n
n
Pin assignment similar to ISO 7588 part 1
Plug-in or PCB terminals
Also available for 42VDC applications
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and VF4 A
F134co_fcw1
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
Contact Data
Contact arrangement
Contact gap
1 form A, 1 NO/1 NO (2x87)
1 form U, 2 NO
1 form C, 1 CO
>0.8mm
24VDC1)
NO/NC
60/45A
40/30A
17/12A
Rated voltage
Limiting continuous current
23°C
12VDC
NO
60A
40A
17A
24VDC
NO
60A
40A
17A
12VDC
NO
2x32A
2x25A
2x11A
24VDC
NO
2x32A
2x25A
2x11A
12VDC
NO/NC
60/45A
40/30A
17/12A
24VDC
NO/NC
60/45A
40/30A
17/12A
85°C
125°C
Limiting making current2)
NO/NC
120A
60A
120A
20A
2x100A
2x40A
2x100A
2x15A
120/45A
60/40A
120/45A
20/15A
120/45A
30/20A
Limiting breaking current
NO/NC
Limiting short-time current
overload current, ISO 8820-33):
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
1.35 x 40A, 1800s
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1
24VDC for 5min conducting nominal current at 23°C
Contact material
silver based
1A at 5VDC
Min. recommended contact load4)
Initial voltage drop
NO contact at 10A, typ./max.
NC contact at 10A, typ./max.
Frequency of operation
at nominal load
Operate/release time typ.
Electrical endurance
resistive load at 14VDC
15/200mV
15/200mV
2x15/200mV
2x15/200mV
15/200mV
20/250mV
15/200mV
20/250mV
15/200mV
20/250mV
6 ops./min (0.1Hz)
7/2ms5)
>2x105 ops.
40A
>2x105 ops.
2x25A
>2x105 ops.
40A (NO)
resistive load at 28VDC
>1x105 ops.
20A
>1x105 ops.
2x15A
>1x105 ops.
20A (NO)
1x105 ops.
30A (NO)
>5x105 ops.
10A (NC)
Mechanical endurance
DC coil
1) Special high performance 24VDC version with contact gap >0.8mm.
>1x107ops.
2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding.
1
03-2014, Rev. 0314
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
6) Without components in parallel.
Max. load DC breaking capacity
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
500Vrms
500Vrms
500Vrms
Vs=+86.5VDC
Vs=+200VDC
Other Data
EU RoHS/ELV compliance
Ambient temperature DC coil
Protection to heat and fire
Climatic cycling with condensation
EN ISO 6988
compliant
-40 to +125°C
UL94-HB or better7)
6 cycles, storage 8/16h
10 cycles, -40/+85°C (5°C/min)
6 cycles, upper air temp. 55°C
56 days
Temperature cycling
IEC 60068-2-14, Nb
Damp heat cyclic
IEC 60068-2-30, Db, Variant 1
Damp heat constant
IEC 60068-2-3, Ca
Category of environmental protection,
IEC 61810
Load limit curve 1: arc extinguishes during transit time (CO contact).
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
RTI – dustproof, RT III – sealed
IP54 (dustproof), IP67 (sealed)
Degree of protection, IEC 60529
Corrosive gas
IEC 60068-2-42
Coil Data
Rated coil voltage
12/24VDC
10 2cm3/m3 SO2, 10 days
1 0.3cm3/m3 H2S, 10 days
IEC 60068-2-43
Coil versions, DC coil
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
Drop test, free fall
IEC 60068-2-32
Terminal type
Cover retention
axial force
pull force
push force
Coil
code
Rated
voltage
VDC
12
24
24
Operate
voltage
VDC
7.2
14.4
16
Release
voltage
VDC
1.6
3.2
4
Coil
resistance6)
Ω 10ꢀ
90
Rated coil
power6)
W
10 to 500Hz > 5g8)
11ms >20g8)
052
053
056
1.6
1.8
2.1
324
268
1m onto concrete
plug-in, QC/PCB
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil operating range
150N
150N
150N
TE0701-J1
Terminal retention
pull force
push force
100N
100N
10N
10N
resistance to bending, force applied to front9)
resistance to bending, force applied to side9)
torque
0.3Nm
Weight
approx. 35g (1.2oz)
Packaging unit
plug-in/PCB
plug-in with bracket
7) Refers to used materials.
315 pcs.
200 pcs.
8) No change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
Accessories
For details see datasheet Connectors for Mini ISO Relays
Does not take into account the temperature rise due to the contact current E=pre-
energization..
2
03-2014, Rev. 0314
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
Terminal Assignment
NOR
NOR_SD
NO_2x87
NO
NOR_2x87
1 form A, 1 NO
with resistor
1 form A, 1 NO
with resistor & serial diode
1 form A, 1 NO (2x87)
1 form A, 1 NO
1 form A, 1 NO (2x87)
with resistor
85
87
30
85
87 87
85
87 87
85
87
30
86
86
30
86
30
86
CO
COR
COD
DNO
1 form C, 1 CO
1 form C, 1 CO
with resistor
1 form C, 1 CO
with diode
1 form U, 2 NO
85
87 87a
85
87 87a
85
87 87b
85
87 87a
86
30
86
30
86
30
86
30
Dimensions
View of the terminals (bottom view)
Power Relay F4 with quick connect (QC) terminals
Measurement
reference plane
5x
0.3
TE1088-R1
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE1093-S1
Power Relay F4 with PCB terminals
View of the terminals (bottom view)
Mounting hole layout (bottom view)
4.5 ±±.ꢀ
2.7 ±±.5
17.9 ±±.25
8.± ±±.25
,
16.9 ±±.ꢀ
TE0907-B1
TE1655-H1
8.4 ±±.25
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE1654-91
3
03-2014, Rev. 0314
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
Product code structure
Typical product code V23134
-A
0
052 -C642
Type
V23134 Power Relay F4
Contact arrangement
A
1 form C, 1 CO
1 form A, 1 NO
1 form U, 2 NO
C
K
1 form A, 1 NO (2x87)
1 form A, 1 NO (non ISO)
B
M
Cover
Coil
0
2
Standard
Bracket at terminal 86 ISO
1
Bracket at terminal 30 ISO
052
056
12VDC
053 24VDC
24VDC (contact gap >0.8mm)
Terminal/arrangement
C642 Plug-in/NO
G242 PCB/NO
C643 Plug-in/CO
G243 PCB/CO
Xnnn Customized (nnn: version number)
Production in Europe (only)
Product code
Arrangement Version Coil suppr. Circuit1)
Coil Contact mat. Terminals
Part number
2-1393302-2
2-1393302-3
4-1393302-1
5-1393302-1
5-1393302-2
1-1414167-0
1-1414168-0
5-1393302-8
6-1393302-0
6-1393302-3
6-1393302-4
7-1393302-5
7-1393302-7
1-1414099-0
4-1414992-3
1393303-9
1-1393303-0
3-1393303-4
3-1393303-7
3-1393303-8
3-1393303-9
4-1393303-4
4-1393303-7
4-1393303-8
5-1393303-0
V23134-A0052-C643
V23134-A0052-G243
V23134-A0052-X278
V23134-A0053-C643
V23134-A0053-G243
V23134-A0056-X4322)
V23134-A0056-X4332)
V23134-A1052-C643
V23134-A1052-X2944)
V23134-A1053-C643
V23134-A1053-X2954)
V23134-B0052-C642
V23134-B0052-G242
V23134-B0052-X2706)
V23134-B0052-X506
V23134-B0053-C642
V23134-B0053-G242
V23134-B1052-C642
V23134-B1053-C642
V23134-B1053-X2964)
V23134-C0052-C642
V23134-C0053-C642
V23134-C1052-C642
V23134-C1052-X2804)5)
V23134-C1053-C642
V23134-K1052-X399
V23134-M0052-C642
V23134-M0052-G242
V23134-M0053-C642
V23134-M0053-G242
V23134-M1052-C642
V23134-M1053-C642
1 form C, 1 CO
Standard
CO
12VDC
Silver based
Plug-in, QC
PCB
R 560Ω
COR
CO
Plug-in, QC
24VDC
PCB
Plug-in, QC
D (cathode 86)
R 1200Ω
COD
COR
CO
Bracket
12VDC
24VDC
12VDC
R 560Ω
COR
CO
R 1200Ω
COR
NO
1 form A, 1 NO
Standard
PCB
R 680Ω
R 560Ω
NOR
NOR_SD3)
NO
Plug-in, QC
24VDC
PCB
Bracket
12VDC
24VDC
Plug-in, QC
R 1200Ω
NOR
NO_2x87
1 form A, 1 NO (2x87) Standard
Bracket
12VDC
24VDC
12VDC
R 560Ω
R 560Ω
NOR_2x87
NO_2x87
NOR non ISO 12VDC
DNO
24VDC
1 form A, 1 NO
1 form U, 2 NO
Plug-in, QC/non ISO 1-1393305-1
Standard
Plug-in, QC
PCB
Plug-in, QC
PCB
5-1393304-6
5-1393304-7
6-1393304-7
6-1393304-8
7-1393304-1
7-1393304-4
24VDC
Bracket
12VDC
24VDC
Plug-in, QC
1) See terminal assignment diagrams.
2) Special feature: contact gap >0.8mm.
3) Serial diode.
4) No hole in terminal 30.
5) No hole in terminal 87a.
6) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
Production in Asia (only)
Product code
Arrangement Version Coil suppr. Circuit1)
Coil Contact mat. Terminals
Part number
7-1904094-0
7-1904094-1
7-1904094-5
V23134-B0052-C642
V23134-B0052-X2702)
V23134-B0053-C642
1 form A, 1 NO
Standard
NO
NOR
NO
12VDC
Silver based
Plug-in, QC
R 680Ω
24VDC
1) See terminal assignment diagrams.
2) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
4
03-2014, Rev. 0314
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明