8-1904094-0 [TE]

Automotive Relays Plug-in Maxi ISO Relays;


型号：	8-1904094-0
厂家：	TE CONNECTIVITY
描述：	Automotive Relays Plug-in Maxi ISO Relays
文件：	总3页 (文件大小：343K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Automotive Relays

Plug-in Maxi ISO Relays

Power Relay F7

■

Pin assignment similar to ISO 7588 part 1

Customized versions on request

– 24VDC versions with contact gap >0.8mm

– Integrated components (e.g. resistor, diode)

– Customized marking/color

– Special covers (e.g. notches, release features, brackets)

Typical applications

Cross carline up to 70A for example: ABS control, cooling fan, energy

management, engine control, glow plug, heated front screen, ignition,

lamps: front, rear, fog light, main switch/supply relay.

F134J_a_bw

Contact Data

Contact Data (continued)

Contact arrangement

1 form A,

1 NO

–

1 form A,

1 NO

–

1 form A,

1 NO

Mechanical endurance

>1x10⁷ops.

1) Special high performance 24VDC version with contact gap >0.8mm.

2) The values apply to a resistive or inductive load with suitable spark suppression and

at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current

duration of maximum 3s for a make/break ratio of 1:10.

3) Current and time are compatible with circuit protection by a typical automotive fuse.

Relay will make, carry and break the speciﬁed current.

4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at

http://relays.te.com/appnotes/

5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay

coil increases the release time and reduces the lifetime caused by increased erosion

and/or higher risk of contact tack welding.

Contact gap

Rated voltage

Limiting continuous current

23°C

85°C

>0.8mm

12VDC

24VDC

24VDC¹⁾

70A

50A

30A

240A

70A

50A

30A

240A

25A

70A

50A

30A

240A

40A

125°C

Limiting making current²⁾

Limiting breaking current

Limiting short-time current

overload current, ISO 8820-3³⁾

1.35 x 50A, 1800s

2.00 x 50A, 5s

Coil Data

Rated coil voltage

3.50 x 50A, 0.5s

6.00 x 50A, 0.2s

24VDC for 5min,

12VDC, 24VDC

Jump start test, ISO 16750-1

Coil versions, DC coil

conducting nominal current at 23°C

Silver based

Coil

code

Rated

voltage

VDC

Operate

voltage

VDC

7.2

14.4

16.0

14.4

Release

Coil

resistance⁶⁾

Ω 10ꢀ

Rated coil

power⁶⁾

Contact material

voltage

VDC

1.6

3.2

4.0

2.4

Min. recommended contact load⁴⁾

Initial voltage drop,

1A at 5VDC

052

053

056

065

165

1.6

1.8

2.1

2.0

form A (NO) contact at 10A, typ./max.

Frequency of operation at nominal load

Operate/release time typ.

10/300mV

6 ops./min (0.1Hz)

7/2ms⁵⁾

324

268

288

Electrical endurance

resistive load at 14VDC

2.0

>1x10⁵ops.

–

6) Without components in parallel.

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

70A

>2x10⁵ops.

–

50A

–

resistive load at 28VDC

>1x10⁵ops. >1x10⁵ops.

25A 40A

Max. DC load breaking capacity

Coil operating range

TEVF4_OVR1

ECR0629-N

Load limit curve: safe shutdown, no stationary arc/make contact.

Load limit curve measured with low inductive resistors veriﬁed for 1000 switching events.

Does not take into account the temperature rise due to the contact current

E = pre-energization.

03-2016, Rev. 0316

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog, product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

www.te.com

a TE Connectivity Ltd. company.

Automotive Relays

Plug-in Maxi ISO Relays

Power Relay F7 ^(Continued)

Insulation Data

Other Data (continued)

Initial dielectric strength

between open contacts

between contact and coil

between adjacent contacts

Load dump test

Shock resistance (functional)

IEC 60068-2-27 (half sine)

Drop test, free fall

IEC 60068-2-32

Terminal type

500V_rms

6ms, min. 30g.⁸⁾

1m onto concrete

plug-in, QC/ PCB

ISO 7637-1 (12VDC), test pulse 5

ISO 7637-2 (24VDC), test pulse 5

V_s=+86.5VDC

V_s=+200VDC

Cover retention

axial force

pull force

150N

push force

Other Data

Terminal retention

pull force

push force

resistance to bending

force applied to side

torque

EU RoHS/ELV compliance

Protection to heat and ﬁre according UL-94

Ambient temperature

compliant

HB or better⁷⁾

-40 to 125°C

100N

10N⁹⁾

Climatic cycling with condensation

EN ISO 6988

10N⁹⁾

0.3Nm

6 cycles, storage 8/16h

Temperature cycling,

IEC 60068-2-14, Nb

Damp heat cyclic,

IEC 60068-2-30, Db, Variant 1

Damp heat constant, IEC 60068-2-3, Ca

Category of environmental protection,

IEC 61810

Degree of protection, IEC 60529

Corrosive gas

IEC 60068-2-42

IEC 60068-2-43

Weight

approx. 38g (1.3oz)

10 cycles, -40/+85°C (5°C/min)

Resistance to soldering heat THT

IEC 60068-2-20

Packaging unit

plug-in:

plug-in with bracket:

PCB

7) Refers to used materials.

8) No change in the switching state >1μs. Valid for NC contacts, NO contact values

signiﬁcantly higher.

9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal

must not have moved by more than 0.3mm.

260°C, 10s

6 cycles, upper air temp. 55°C

56 days

210 pcs.

208 pcs.

315 pcs.

RTI – dustproof, RT III – sealed

IP54 (dustproof), IP67 (sealed)

10 2cm³/m³SO₂, 10 days

1 0.3cm³/m³H₂S, 10 days

Vibration resistance (functional)

IEC 60068-2-6 (sine sweep)

10 to 500Hz, min. 5g⁸⁾

Accessories

For details see datasheet

Connectors for Maxi ISO Relays

Terminal Assignment

1 form A, NO

NOR

1 form A, NO with resistor

NOD

1 form A, NO with diode

Dimensions

Power Relay F7 with quick connect terminals similar to ISO 8092-1

View of the terminals (bottom view)

2ꢁ.9 0.ꢀ

1ꢁ 0.1

0.4

0.2

ꢁ.ꢀ 0.1

TE1103-411

2ꢁ.9 0.ꢀ

16 0.ꢁ

24.9 0.ꢀ

Measurement

reference plane

0.ꢀ

11 0.ꢁ

17 +1/-0.ꢁ

ø 1.7 +0.2

6.ꢀ 0.1

0.8 0.0ꢁ

1.2 0.0ꢁ

9.ꢁ 0.1

03-2016, Rev. 0316

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

Automotive Relays

Plug-in Maxi ISO Relays

Power Relay F7 ^(Continued)

Dimensions (continued)

Power Relay F7 with PCB terminals

View of the terminals (bottom view)

Mounting hole layout (bottom view)

3.8

26.2 MAX.

6x Ø 2.18

17.9

8.4

25.2 MAX.

2.7

3.8

3.0

2x Ø 1.93

8.5

3.8

1.5

17.0

TE2104-H1

TE2105-Q2

TIN PLATED

3.8

Product code structure

Typical product code V23134

-J

052 -D642

Type

V23134 Power Relay F

Contact arrangement

1 form A, 1 NO

Cover

Coil

Standard

Bracket near terminal 86 ISO

Bracket at terminal 30 ISO

052

056

165

12VDC

053

065

24VDC

24VDC (contact gap >0.8mm)

Terminal/arrangement

D642 Plug-in/NO

Xnnn Customized (nnn: version number)

Production in Europe (only)

Product code

Arrangement Cover

Coil suppr.

Circuit¹⁾

NOR

NOD

NOR

Coil Contact mat. Terminals Part number

V23134-J0052-D642

V23134-J0052-X429

V23134-J0052-X439

V23134-J0052-X455

V23134-J0052-X511

V23134-J0052-X461³⁾

V23134-J0053-D642

V23134-J0065-X497⁴⁾

V23134-J0165-X537²⁾³⁾

V23134-J1052-D642

V23134-J1052-X281

V23134-J1053-D642

V23134-J2165-X538²⁾³⁾

1 form A, 1 NO

Standard

12VDC

Silver based

Plug-in, QC

7-1393303-3

1-1414147-0

1-1414286-0

1-1414610-0

3-1415001-2

1-1414469-0

9-1393303-7

3-1414937-3

3-1904117-4

0-1393304-9

1-1393304-0

1-1393304-1

3-1904117-5

Resistor 680Ω

Diode (cathode 86)

Resistor 470Ω

PCB

Resistor 560Ω

NOR

Plug-in, QC

24VDC

PCB

Plug-in, QC

Resistor 1200Ω

Resistor 560Ω

Resistor 1200Ω

NOR

Bracket

12VDC

24VDC

NOR

1) See terminal assignment diagrams.

2) Special feature: contact gap >0.8mm.

Other types on request.

3) Special feature: 14.5mm load terminals.

4) Packed in tray with 300 pcs. per unit.

This list represents the most common types and does not show all variants covered by this datasheet.

Production in Asia (only)

Product code

V23134-J0052-D642

V23134-J0052-X429

V23134-J0052-X439

V23134-J0052-X461³⁾

V23134-J0053-D642

Arrangement Cover

Coil suppr.

Circuit¹⁾Coil

Contact mat. Terminals Part number

1 form A, 1 NO

Standard

NOR

NOD

NOR

12VDC

Silver based

Plug-in, QC

7-1904094-7

7-1904094-8

7-1904094-9

8-1904094-0

8-1904094-3

Resistor 680Ω

Diode (cathode 86)

Resistor 560Ω

24VDC

1) See terminal assignment diagrams.

2) Special feature: contact gap >0.8mm.

Other types on request.

3) Special feature: 14.5mm load terminals.

This list represents the most common types and does not show all variants covered by this datasheet.

03-2016, Rev. 0316

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog, product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

www.te.com

a TE Connectivity Ltd. company.

相关型号：