D3213 [TE]
FX2 Relay; FX2继电器
| 型号： | D3213 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | FX2 Relay |
| 文件： | 总11页 (文件大小：1262K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AXICOM
Telecom-, Signal and RF Relays
FX2 Relay
108-98003 • Apr. 10 Rev. G • ECOC: JM10
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
fitness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Specifi-
cations are subject to change without notice.
Index
Dimensions
4
5
6
7
8
8
9
Coil Operating Range
Coil Data and Ordering Information
Contact Data
Insulation
General Data
UL 508
File No. E 111441
UL 60950
IEC/EN60950
IEC Ref. Cert. No. CH-3269
Packing
All specifications subject to change. Consult Tyco Electronics for latest specifications.
2 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
2 pole telecom / signal relay
Through Hole Type (THT)
Polarized, latching or non-latching 1 coil
Relay types: sensitive non lachting version with 1
coil high sensitive non latching version
with 1 coil, latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per
product date code 0342 / halogen free.
Features
• Telecom/signal relay (dry circuit, test access, ringing)
• Slim line 15 x 7.3 mm, 0.590 x 0.287 inch
• Switching current 2 A
• 2 changeover contacts (2 form C / DPDT)
• Bifurcated contacts
• High sensitivity results in low nominal power consump-
tion 80 mW for high sensitive, 140 mW for sensitive
version
• High dielectric characteristic
≤ 1800 Vrms also between open contact
• High surge capability (1.2 / 50 µs and 10 / 700 µs)
meets
Telcordia GR 1089 and FCC Part 68
≤ 2500 V between open contacts
≤ 3500 V between coil and contacts
• High mechanical shock
up to 300 G functional
up to 1500 G survival
• Hermetically sealed (RT V)
Typical applications
• Communications equipment
linecard application - analog, ISDN, xDSL, PABX
Voice over IP
• Office and business equipment
• Measurement and control equipment
• Consumer electronics
Insulation category
Set top boxes, HiFi
• Medical equipment
Supplementary insulation according
Working voltage
Mains supply voltage
Repetitive peak voltage
Pollution degree
IEC / EN 60950
≤ 300 Vrms
≤ 250 Vrms
2500 V
Internal: 1
External: 2
V-0
Flammability classification
Maximum operating temperature
85 °C
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Dimensions
Dimensions in mm
THT
mm
inch
L
W
H
14.95 ± 0.05
7.30 ± 0.05
10.70 ± 0.05
0.588 ± 0.002
0.287 ± 0.002
0.421 ± 0.002
T
3.30 ± 0.30
N/A
5.08 ± 0.15
0.50
0.129 ± 0.012
N/A
0.199 ± 0.006
0.019
T1
T2
Tw
S
0.30 ± 0.05
0.012 ± 0.002
THT Version
Mounting hole layout
View onto the component side of the PCB (top view)
Terminal assignment
Relay – top view
Latching type, 1 coil
Non-latching type
reset condition
not energized condition
Contacts in reset position. Contact position might change
during transportation and must be reset before use.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Coil Operating Range
Unom =
Umax. =
Nominal coil voltage
Upper limit of the operative range of
the coil voltage (limiting voltage)
80 mW
140 mW
200 mW
3.4
3.2
3
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
Uop. min. = Lower limit of the operative range of the
coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
2.8
2.6
2.4
2.2
2
1.8
1.6
1.4
1.2
1
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uop. min.
Urel. min.
-60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120
Ambient Temperature [°C]
260 mW
300 mW
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Umax. at 0 A
Umax. at 2 x 1 A
Umax. at 2 x 2 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
-60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80
90 100 110 120
Ambient Temperature [°C]
4.4
100 mW Latching
4.2
4
3.8
3.6
3.4
3.2
3
2.8
2.6
2.4
2.2
2
Umax. - 100 % coil duty at 0 A
Umax. - 5 % coil duty at 2 x 2 A
Umax. - 5 % coil duty at 2 x 1 A
Umax. - 5 % coil duty at 0 A
1.8
1.6
1.4
1.2
1
Unom. nominal coil voltage
0.8
0.6
0.4
0.2
0
Uset min.
-60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90 100 110 120 130 140
Ambient Temperature [°C]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
5 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin
voltage Umax
Vdc
Vdc
Vdc
Vdc
mW
Ω / ± 10 %
Standard Version
Non-Latching, 1 coil
3
4
4.5
5
6
9
12
24
48
2.10
6.30
8.40
9.40
10.50
12.60
18.90
25.20
42.20
68.90
0.30
0.40
0.45
0.50
0.60
0.90
1.20
2.40
4.80
140
140
140
140
140
140
140
200
300
64
114
145
178
257
574
1028
2880
7680
D 3206
D 3207
D 3204
D 3209
D 3205
D 3210
D 3202
D 3212
D 3213
1462034-6
1462034-8
1462034-2
1462034-9
1462034-5
1-1462034-3
1462034-1
1-1462034-4
1-1462034-5
2.80
3.15
3.50
4.20
6.30
8.40
16.80
33.60
High Sensitive Version
Non-Latching, 1 coil
3
4.5
5
6
9
12
24
48
2.25
3.38
3.75
4.50
6.75
9.00
18.00
36.00
8.30
0.30
0.45
0.50
0.60
0.90
1.20
2.40
4.80
80
80
80
80
80
80
140
260
113
353
313
D 3221
D 3222
D 3223
D 3224
D 3225
D 3226
D 3227
D 3228
1-1462034-9
2-1462034-0
2-1462034-1
2-1462034-2
2-1462034-3
2-1462034-4
2-1462034-5
2-1462034-6
11.10
12.50
13.90
16.70
33.40
50.40
70.00
450
1013
1800
4114
8882
Standard Version
Latching, 1 coil
3
4.5
5
6
9
2.25
7.50
-2.25
-3.38
-3.75
-4.50
-6.75
-9.00
-18.00
100
100
100
100
100
100
150
90
203
250
360
810
1440
3840
D 3241
D 3242
D 3243
D 3244
D 3245
D 3246
D 3247
2-1462034-8
2-1462034-9
3-1462034-0
3-1462034-1
3-1462034-2
3-1462034-3
3-1462034-4
3.38
3.75
4.50
6.75
9.00
18.00
11.20
12.40
14.90
22.40
29.80
48.70
12
24
High-Dielectric Version
Non-Latching, 1 coil
3
2.25
6.30
0.30
200
45
D 3291
6-1462034-6
Further coil versions are available on request.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
6 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Contact Data
Number of contacts and type
Contact assembly
2 changeover contacts
Bifurcated contacts
Contact material
Palladium-ruthenium - gold covered
Limiting continuous current at max. ambient temperature
Maximum switching current
2 A
2 A
Maximum swichting voltage
220 Vdc
250 Vac
Maximum switching capacity
60 W, 62.5 VA
< 10 µV
Thermoelectric potential
Minimum switching voltage
100 µV
Initial contact resistance / measuring condition: 10 mA / 20 mV
< 70 mΩ
Electrical endurance
CC0 contact category 0 (≤ 30 mV / ≤ 10 mA)
at cable load open end
at 24 V / 1.25 A
at 125 V / 0.24 A
at 30 V / 2 A
min. 2.5 x 106 operations
min. 2.0 x 106 operations
min. 5 x 105 operations
min. 5 x 105 operations
min. 5 x 105 operations
Mechanical endurance
UL contact ratings
typ. 108 operations
220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
resistive load
DC current [A]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
7 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Insulation
Standard Version
High Dielectric Version
Insulation resistance at 500 Vdc
> 109 Ω
Dielectric test voltage (1 min)
between coil and contacts
between adjacent contact sets
between open contacts
1800 Vrms
1800 Vrms
1800 Vrms
4000 Vrms
1500 Vrms
1500 Vrms
Surge voltage resistance
according to Telcordia GR 1089 (2 / 10 µs)
between coil and contacts
between adjacent contact sets
between open contacts
3500 V
2500 V
2500 V
6000 V
2000 V
2000 V
according to FCC 68 (10 / 160 µs) and IEC (10 / 700 µs)
between coil and contacts
between adjacent contact sets
between open contacts
3500 V
2500 V
2500 V
6000 V
2000 V
2000 V
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 4 pF
max. 2 pF
max. 2 pF
RF Characteristics
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
- 34.0 dB / - 15.1 dB
- 0.03 dB / - 0.60 dB
1.07 / 1.45
General Data
Operate time at Unom typ. / max.
3 ms / 4 ms
3 ms / 4 ms
20ms*
Reset time (latching) atUnom , typ. / max.
Duration of set / reset pulse (latching) min.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
1 ms / 3 ms
3 ms / 4 ms
1 ms / 5 ms
50 operations/s
-55 °C ... +85 °C
< 165 K/W
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
125 °C
20 G 10 to 500 Hz
Shock resistance, half sinus, 11 ms
50 G (function)
1500 G (damage)
Degree of protection / Environmental protection
Needle flame test
immersion cleanable, IP 67 / RT V
application time 20 s, no burning
Mounting position
any
Ultrasonic cleaning is not recommended
max. 2.5 g
Processing information
Weight (mass)
Terminal surface
SnCu 0.7
Resistance to soldering heat
265 °C / 10 s
* Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature
All data refers to 23 °C unless otherwise specified.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
8 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
Packing
Dimensions in mm
Stick dimension
Tube for THT version
50 relays per stick
1‘000 relays per box
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 11
AXICOM
Telecom-, Signal and RF Relays
108-98003 Rev. G
FX2 Relay
IM Relays
D2n Relays
4th generation slim line – low profile polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fulfills the Telcordia requirements
accordingGR1089(2,5kV–2/10µs)andFCCpart68(1,5kV–10/ 160 µs).
The IM relay is tested according CECC/IECQ and certified in accordance
with IEC/EN 60950 and UL 60950.
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150....500mW.TheD2nrelayiscapabletoswitchcurrentsupto3A.Dielectric
strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fulfills the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certified in accordance with IEC/EN 60950 and UL60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
FX2 Relays
Reed Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certified in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
FT2 / FU2 Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay withAC coil. The benefit is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fulfills the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certified
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Other Relays
FP2 Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 50-plus years old now, such as
Card Relay SN (V23030 series), Small General Purpose Relay (V23006
series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167
series). Accessories like sockets, hold down springs, etc. optional.
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Dimensions approx. 20 x 10 mm board space and 11 mm height.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10 of 11
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax
+41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 32
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax
+49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
AXICOM
Telecom-, Signal and RF Relays
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明