IHVA200-H3D48V-BF [TE]
High Voltage Contactors IHVA200 Series;型号: | IHVA200-H3D48V-BF |
厂家: | TE CONNECTIVITY |
描述: | High Voltage Contactors IHVA200 Series |
文件: | 总4页 (文件大小:297K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
General Purpose Contactors
TE Connectivity
High Voltage Contactors IHVA200 Series
n
n
n
n
n
n
Non-polarity for contact current
Maximum DC breaking capacity at 2000A
Maximum DC breaking capacity at 1500VDC
Maximum making inrush current capacity at 600A
Optional auxiliary contact available
High insulation resistance (14mm clearance/25mm creepage)
Typical applications
Charging station, AGV, Electric forklift,
Energy storage systems, Photovoltaic inverter
Approvals
cULus E58304, CCC
Main Contact Data
Insulation Data
Contact arrangement
Switching voltage range 1)
Rated current
1 Form X (SPST-NO-DM)
Dielectric Withstand Voltage (leakage current <1mA)
12 - 1500VDC
between open contacts
between contact and coil
Initial insulation resistance @ 500VDC
between open contacts
between contact and coil
Clearance/creepage
5,600Vrms/8,000Vdc
200 A
Ag alloy
6000Vrms
Contact material
Initial Voltage Drop
Operate Time max.
Operate bounce time max.
Release Time, max
Mechanical Life
0.3mΩ (200A current 1 minute after)
1×108Ω
1×108Ω
65ms
2ms
20mS
between contact and coil
14mm clearance/25mm creepage
500,000 cycles
1) Please refer to “contact ratings” with the specified application condition. If there is no
specified statement, the switching test was performed at room temp.
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
Contact ratings
Load
Cycles
200
50
5A, 1500VDC, UL60947-4-1
20A, 1000VDC, UL60947-4-1
200A, 1500VDC, carry only, UL60947-4-1
200A, 110VDC, EN/UL60947-4-1
200A, 450VDC,
200A, 750VDC,
600A, make only,
DC coil
-40°C to +85°C
/
Category of environmental protection
IEC 61810
Vibration resistance (functional)
Shock resistance (functional),
Terminal type
5,000
100
30
3,000
2
RTII - flux proof
Sine, 55 – 2000Hz, Peak 20G
11ms 1/2 Sine, Peak 20G
Screw for contact, wire for coil
465g
2000A, 400VDC, break only
Weight
Packaging/unit
20pcs/box
Auxiliary Contact Data
Contact Form
Contact Current, Max.
Contact Current, Min.
1 Form A (SPST-NO)
2A, 30VDC / 3A, 125VAC
100mA, 8VDC
IHVA200 Estimated Carrying Current Capability 2)
Contact Resistance, Max.
0.3Ω @ 30VDC / 0.15Ω @ 125VAC
Coil versions, DC coil
Coil
Nominal Operate
Maximum
Release Coil
Coil Power
code Voltage
VDC
Voltage
VDC
allowable
voltage
VDC
15
30
60
Voltage resistance
W
VDC
Ω
12
24
48
12
24
48
9
18
36
1
2
4
29
115
460
5
5
5
All figures are given for coil without pre-energization, at ambient temperature +23°C
2) All figures are given at ambient temperature 85°C and
the contactors connected with 2/0 cable
1
01-2021 Rev. 0121
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
General Purpose Contactors
TE Connectivity
High Voltage Contactors IHVA200 Series (Continued)
Dimensions
Connection wire
Note: TE will provide 2 pairs of M8 nuts and gaskets.
TE will provide the connection wire for coil terminals and auxiliary
contact terminals (for the version with auxiliary contact).
2
01-2021, Rev. 0121
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
General Purpose Contactors
TE Connectivity
High Voltage Contactors IHVA200 Series (Continued)
Product code structure
IHVA 200
-A
3
D
12
V
-B
F
,XX
Product series
IHVA = IHVA Contactor
Rated current
200 = 200A
Contact form
A = Normally Open
H = Normally Open + NO Aux Contacts
Main contact material
3 = Ag alloy
Coil Power
D = 5W
Coil Voltage
12 = 12Vdc
24 = 24Vdc
48 = 48Vdc
Enclosure
V = RTII
Mounting position
B = Bottom
Coil Terminal Connection
F = Fasten Terminal
Customer Special Designator
XX 2 digit or letter specified by manufacture factory
Product code
IHVA200-A3D12V-BF
Arrangement
Mounting position
Main Contact Material
Coil
12VDC
Part number
2071499-1
IHVA200-A3D24V-BF
IHVA200-A3D48V-BF
IHVA200-H3D12V-BF
IHVA200-H3D24V-BF
IHVA200-H3D48V-BF
Normally Open
24VDC
48VDC
12VDC
24VDC
48VDC
2071499-2
2071499-3
1-2071499-1
1-2071499-2
1-2071499-3
Bottom
Ag alloy
Normally Open + NO Aux
Contacts
3
01-2021 Rev. 0121
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
General Purpose Contactors
TE Connectivity
High Voltage Contactors IHVA200 Series (Continued)
Precaution
1. When the Connection wire is inserted into the contactor, it is necessary to ensure that the convex hull of the Connection wire
is stuck in the U-shaped groove to prevent the connecting wire from falling off.
2. Please do not directly connect the reverse diode to the coil if intend to suppress the reverse voltage of coil. It is recommended to use a reverse diode plus
a Zener diode as below circuit. The regulated voltage is recommended to take 2 times the rated voltage of the coil.
-
+
3. When using PWM energy-saving control, ensure that the coil is firstly energized at rated coil voltage for 100mS, the PWM frequency is 20KHz, and duty
cycle is > 25%.Similarly, do not directly connect the reverse diodes at both ends of the coil.
4. When the external circuit is connected to the contact end of the contactor, the copper bar used and the copper terminal plane around the bolt post must
be in direct and close contact. Flat pad and elastic washer, the torque should be 8.8~11 N·M when tightening the nut to ensure reliable connection of the
terminal and prevent the nut from loosening.
5. When the relay is switching the DC load circuit, the final mode of its switching life may cause the contact to be welded or the arc cannot be cut off. It is
recommended that customers consider the precautions after relay failure to ensure safety in the actual application design.
4
01-2021, Rev. 0121
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明