MA47123 [TE]
Multi Purpose Axial Leaded Glass PIN Diodes; 多用途轴向引线玻璃PIN二极管型号: | MA47123 |
厂家: | TE CONNECTIVITY |
描述: | Multi Purpose Axial Leaded Glass PIN Diodes |
文件: | 总6页 (文件大小:442K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Glass Package Styles
Features
♦
♦
♦
♦
♦
♦
♦
Glass Hermetically Sealed Packages
Large Signal Switch Design
Available in Low Capacitance
Passivated Chip for Low Leakage Current
Tape and Reel Packaging Available
Fully RoHS Compliant
ODS 4, 54 , 139, 146
MIL-STD 19500 Screening Available
Description
M/A-COM’s series of low and medium power glass
PIN diodes are specifically designed for use in
switches, duplexers, electrically tuned digital filters
AGC attenuators, TR switches and RF modulators.
They preform particularly well in distortion sensitive
environments from HF through S-Band. These
hermetically sealed axial leaded PIN diodes are
designed for use in the harshest commercial and
military applications where their inherent ruggedness
makes them an ideal choice. They may ordered
screened to meet MIL-STD 19500 requirements.
PIN Chip
Glass Cylinder
Tin Plated Dumet Leads
Design Recommendations
Absolute Maximum Ratings
TAMB = +25°C (Unless Otherwise Noted) 1
The axial leaded, glass, PIN diode series is available
in four glass package styles. The ODS 54 is the
most suitable to meet low power, low capacitance
requirements for high isolation in a series connected
switch at VHF frequencies. The ODS 4, 139 and 146
are most suited for moderate power applications
requiring low package inductance.
Parameter
Absolute Maximum
D.C. Reverse Voltage
(See Tables)
Operating Temperature
Storage Temperature
Installation Temperature
-55°C to +175°C
-55°C to +200°C
+280°C for 10 Seconds
Power Dissipation Listed Below Will De-Rate
Linearly to 0mW at 175˚C
250mW without heatsink
Case Style 54
@ +25°C
500mW without heatsink
M/A-COM’s silicon PIN diode chips are also
available in a wide variety of alternative package
styles besides glass. For case style options,
availability and electrical specifications, please
refer to the “Packaged PIN Diode Datasheet”
located on the M/A-COM website at :
Case Style 139
@ +25°C
1000mW without heatsink
Case Style 4 & 146
@ +25°C
Notes
www.macom.com/DataSheets/packagedpindiodes.pdf
1.Operation of this device above any one of these
parameters may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Unless
Nominal Characteristics
Unless
otherwise noted
otherwise noted
Carrier
I Region
Length
4
5
Max. Cap.
1MHz
Max. Series Res.
100MHz
Lifetime
Rev. Volt.
Package
Style
Part Number
VR
< 10 µA
VDC
Mils
CT @ -
pF
1.001
μS
RS @
50V
10mA
Ω
MA47120
1N5719
54
54
35
0.5
1.5 2
3.0
1.0
0.4
2.0
100
0.35
0.25 3
0.30
0.30
0.30
MA4P203
MA47047
MA47600
MA4P404
54
54
54
54
100
200
200
250
1.5
0.1
1.0
2.0
1.0
0.8
2.0
4.0
1.0
3.0
6.0
.60 2
Nominal Characteristics
Max. Cap.
1MHz
Max. Series Res.
100MHz
Rev. Volt.5
Carrier
I Region
Length
Lifetime4
Part Number
Package
Style
VR < 10 µA
CT @ -50V
pF
RS @ 10mA
Ω
μS
Mils
VDC
MA4PH151
MA47110
MA47123
139
139
139
100
200
200
1.20
0.55
0.50
0.6
6.0
3.0
1.0
2.0
1.0
0.8
4.0
2.0
Nominal Characteristics
Max. Cap.
1MHz
Max. Series Res.
100MHz
Rev. Volt.5
Carrier
I Region
Length
Lifetime4
Part Number
Package
Style
VR < 10 µA
CT @ -50V
pF
1.50
RS @ 50mA
μS
Mils
VDC
Ω
0.6
1.0
MA47266
MA4PH301
146
146
200
200
3.0
5.0
3.0
5.0
1.10
Nominal Characteristics
Max. Cap.
1MHz
Max. Series Res.
100MHz
Rev. Volt.5
Carrier
I Region
Length
Lifetime4
Part Number
Package
Style
VR < 10 µA
CT @ -100V
RS @ 100mA
VDC
μS
Mils
pF
Ω
MA4P504
MA4P505
MA4P506
MA4P606
4
4
4
4
500
500
0.35
0.50
0.85
0.70
0.60
0.45
0.30
0.70
1.0
2.0
3.0
4.0
2.0
2.0
2.0
4.0
500
1000
Notes:
1. Tested at VR = 20V.
2. Tested at IF = 50mA.
3. Tested at VR = 10V.
4. Nominal carrier lifetime, TL, specified at IF = + 10mA , IREV = - 6mA.
5. Minimum specified reverse voltage, VR, is sourced and the resultant reverse leakage current, IR, is measured to be <10μA.
*Specifications subject to change without notice
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Typical RS vs. IF @ TAMB = +25°C
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Typical RS vs. IF @ TAMB = +25°C
FORWARD CURRENT (IF)
FORWARD CURRENT (IF)
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Package Outline Dimensions
B
A
C
D
(2 plcs)
Dimension A
Mils mm
265 ± 35 7.33 ± .89 96 ± 11 2.44 ± .28 1100 ± 100 27.94 ± 2.54
155 ± 10 3.94 ± .25 71 ± 3 1.8 ± .08 1100 ± 100 27.94 ± 2.54
Dimension B
Dimension C
Dimension D
Package
Style
Mils mm
Mils
mm
Mils
mm
4
20 ± 2
15 ± 1
20 ± 3
20 ± 3
.51 ± .05
.38 ± .03
.51 ± .08
.51 ± .08
54
139
146
150 ± 15 3.81 ± .38 60 ± 10 1.52 ± .25 1100 ± 100 27.94 ± 2.54
220 ± 20 5.59 ± .51 95 ± 10 2.41 ± .25 1100 ± 100 27.94 ± 2.54
Assembly Recommendations
•
Leads on axial leaded devices must be formed while being held firm. Bending the leads too close to the body
of the part may cause internal damage to the device. Bends <0.060” from body are not recommended.
Appropriate fixturing should be used.
•
•
Devices may be soldered using standard 60/40, Sn/Pb or RoHS compliant solders. Axial leads are tin plated,
50μM, thick to ensure an optimum connection.
For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM website.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
Axial Leaded Glass PIN Diodes
Multi Purpose Axial Leaded Glass PIN Diodes
Rev. V6
RoHs Compliant
Environmental Ratings
M/A-COM’s axially leaded glass PIN diodes are designed to meet most environmental and electrical
requirements and may be ordered screened to MIL-STD-19500 as described in the table below.
METHOD
MIL-STD 750
TEST
DESCRIPTION/ CONDITIONS
Moisture Resistance
High Temperature Storage
HTRB
1021
85°C, 85% Relative Humidity
1031
1038
1051
2016
2056
2026
2006
1071
1071
+175°C
80% of rated VR, 50°C
-65°C to +175°C, 20 Cycles
500 g’s
Temperature Cycling
Shock
Vibration
15 g’s
Solderability
IPC/JDEC J-STD-02
20,000 g’s
Constant Acceleration
Fine Leak
H
Gross Leak
C or E
Ordering Information
M/A-COM’s glass PIN diodes are tape and reeled in 1000 piece quantities. The various base part numbers are only
available in the case styles as shown in the tables on page 2. To order, indicate the base part number followed by a
dash and the indicated package style. Also add a “T” at the end for tape and reel
For example: The MA4P504-4T is the MA4P504 chip in case style 4, tape and reeled.
*Specifications subject to change without notice
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明