MA4P7455-1225 [TE]
Quad PIN Diode π Attenuator 10 - 4000 MHz; 四PIN二极管衰减器π 10 - 4000兆赫型号: | MA4P7455-1225 |
厂家: | TE CONNECTIVITY |
描述: | Quad PIN Diode π Attenuator 10 - 4000 MHz |
文件: | 总7页 (文件大小:347K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Features
Functional Schematic
•
•
4 PIN diodes in a SOT-25 Plastic Package
Externally Selectable Bias and RF Matching
Network
•
•
•
•
•
•
•
•
•
10 – 4,000 MHz Useable Frequency Band
+ 43 dBm IP3 @ 1000 MHz (50 Ω)
1.0 dB Loss @ 1000 MHz (50 Ω)
30 dB Attenuation @ 1000 MHz (50 Ω)
Lead-Free SOT-25 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MA4P274-1225
Description
M/A-COM’s MA4P7455-1225 is a wideband, lower
insertion loss, high IP3, Quad PIN Diode
π
Attenuator in a low-cost, lead free surface mount
SOT-25 package. Four PIN Diodes in one package
reduce design parasitics and improve circuit density.
Pin Configuration
Pin No.
Function
Pin No.
Function
These PIN Diode Attenuators perform well where RF
Signal Amplitude Control is required in 50 Ω Hand-
set Circuits and 75 Ω Broadband CATV Systems.
Exceptional Insertion Loss, Attenuation Range, and
IP3 at <10 mA bias make these devices suitable for
better power level control in RF Amplifiers.
1
2
3
RF IN
4
5
Shunt 1 Bias
Shunt 2 Bias
Series Bias
RF OUT
Absolute Maximum Ratings2,3
Parameter
Absolute Maximum
Ordering Information1
Operating Temperature
-65 °C to +125 °C
Storage Temperature
No Dissipated Power
-65 °C to +150 °C
Model No.
Package
DC Voltage at
Temperature Extremes
MA4P7455-1225T
MADP-007455-001SMB
Tape and Reel
Sample Board
- 100 V
75 mA
DC Current
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
1. Reference Application Note M513 for reel size information.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Typical 50 Ω Performance4 @ 25°C using Wideband RF Circuit Design
Parameter
Test Conditions
Units
Min.
Typ.
Max.
+3 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
Insertion Loss
dB
—
-2.0
—
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
Insertion Loss
Return Loss
Attenuation
dB
dB
dB
—
—
—
-1.0
-10
-29
—
—
—
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
1000 MHz
0 mA - Series Diode Bias / 0.75 V - Shunt 1 and 2 Bias
1000 MHz
0 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
F1 = 1000 MHz, F2 = 1100 MHz
dBm
dBm
—
—
43
43
—
—
Input IP3
0 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
+6.5 mA Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
F1 = 100 MHz, F2 = 110 MHz
dBm
dBm
—
—
43
33
—
—
Input IP3
Within 1 dB of Final Attenuation Value
1000 MHz
Settling Time
uS
—
—
3
—
—
RF C.W. Incident
Power
0 - 20 V Series Diode Bias / 0.75 V Shunt 1 and 2 Bias
dBm
+20
4. Values shown include through loss calibrated out of RF test circuit.
Typical 75 Ω Performance5 @ +25°C using Wideband RF Circuit Design
Parameter
Test Conditions
Units
Min.
Typ.
Max.
+2 mA Series Diode Bias / 1.0 V Shunt 1 and 2 Bias
+4.5 mA Series Diode Bias / 1.0 V Shunt 1 and 2 Bias
1000 MHz
dB
dB
—
—
-1.1
-0.6
—
—
Insertion Loss
0 mA / Series Diode and 1.0 V Shunt 1 and 2 Bias
1000 MHz
Attenuation
Return Loss
dB
dB
—
—
-27
-10
—
—
+4.5 mA / Series Diode and 1.0 V Shunt 1 and 2 Bias
1000 MHz
5. Values shown include through loss calibrated out of RF test circuit.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Recommended PCB Layout
Series and Shunt Diode Bias Currents
as a Function
of Vseries and Vshunt Voltage
(Values shown are PER DIODE)
Ishunt
Diode
(mA)
Vshunt
Bias (V)
Vseries
Bias (V)
Iseries
Diode (mA)
0.75
0.75
0.75
0.75
0.75
0
1
2
3
4
0.000
0.106
0.443
0/773
1.099
0.192
0.120
0.048
0
Parts List
Part
Value
Case Style Manufacturer
C1, C2, C3,
C4, C5
100 pF
0603
0402
Murata
0
R1, R2, R3,
R4, R5
1000 Ω
Panasonic
0.75
5
1.426
0
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
6
1.750
2.092
2.424
2.756
3.088
3.421
3.754
4.087
4.410
4.743
5.081
5.406
5.750
6.079
6.413
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
MA4P7455-1225T Spice Model
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pin Diode Model
NLPINM2
Is = 1E-14 A
Vi = 0 V
Un = 900 cm2/V-sec
Wi = 60 um
Rr = 1.25 Ohm
Cmin = 0.20 pF
Tau = 1.0 usec
Rs = 0.1 Ohm
Cjo = 0.27 pF
Vj = 0.7 V
M = 0.5
Fc = 0.5
Imax = 2.5E+6 A/m2
Kf = 0
Af = 1
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Schematic 10 - 1000 MHz, 50 Ω, RF Circuit 9
9. Keeping PIN 4 & PIN 5 as Separate Bias Points (Same V) reduces RF leakage (increases attenuation) through an otherwise connected
Common Anode Bias Note.
Schematic 1 - 4 GHz, 50 Ω, RF Circuit 10
10. Keeping PIN 4 & PIN 5 as Separate Bias Poitme V) reduces RF leakage through n erwise connected Common Anode Bias
Node.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Lumped Element Model for MA4P7455-1225 PIN Diode π Attenuator in SOT-25
Lead Free SOT-25 †
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Typical Performance Curves @ +25°C, 50 - 1000 MHz, Shunt Bias = 0.75 Volts
Attenuation vs. Control Voltage
Insertion Loss vs. Frequency
10
0
-0.5
-10
-20
-30
-40
-50
-60
-70
-1.0
Insertion Loss (20V Series Diode)
Insertion Loss (10V Series Diode)
50 MHz
500 MHz
1000 MHz
-1.5
-2.0
-2.5
20
15
10
5
0
0
200
400
600
800
1000
Control Voltage (V)
Frequency (MHz)
Input Return Loss vs. Control Voltage
Output Return Loss vs. Control Voltage
0
0
-5
-10
-15
-20
-5
-10
-15
-20
-25
-25
50 MHz
500 MHz
1000 MHz
50 MHz
500 MHz
1000 MHz
-30
-30
-35
-35
-40
-40
20
15
10
5
0
20
15
10
5
0
Control Voltage (V)
Control Voltage (V)
IP3 vs. Control Voltage
70
F1 = 1000 MHz, F2 = 1010 MHz
F1 = 100 MHz, F2 = 110 MHz
60
50
40
30
20
10
20
15
10
5
0
Control Voltage (V)
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MA4P7455-1225
Quad PIN Diode π Attenuator
10 - 4000 MHz
Rev. V2
Typical Performance Curves @ +25°C, 1000 - 5000 MHz, Shunt Bias = 0.75 Volts
Insertion Loss vs. Frequency
Attenuation vs. Control Voltage
0
0
-5
-10
-15
-20
-25
-30
-35
-2
-4
Insertion Loss (20V)
Insertion Loss (10V)
1000 MHz
2000 MHz
3000 MHz
4000 MHz
5000 MHz
-6
-8
-10
0
1
2
3
4
5
0
5
10
Control Voltage (V)
15
20
Frequency (GHz)
Input Return Loss vs. Control Voltage
Output Return Loss vs. Control Voltage
-8
-8
-10
-12
-10
-12
1000 MHz
2000 MHZ
3000 MHZ
4000 MHZ
1000 MHz
2000 MHz
3000 MHz
4000 MHz
5000 MHz
-14
-14
-16
-16
5000 MHZ
-18
-18
-20
-22
-24
-20
-22
-24
0
5
10
15
20
0
5
10
15
20
Control Voltage (V)
Control Voltage (V)
IP3 vs. Control Voltage (10 MHz Spacing)
P1dB vs. Control Voltage
38
55
36
34
32
2000 MHz
3000 MHz
4000 MHz
50
5000 MHz
45
30
28
26
24
1000 MHz
2000 MHz
3000 MHz
4000 MHz
5000 MHz
40
35
20
15
10
Control Voltage (V)
5
0
20
15
10
5
0
Control Voltage (V)
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明