MAAM-011109 [TE]
Wideband Amplifier 10 MHz - 40 GHz; 宽带放大器10兆赫 - 40 GHz的
| 型号： | MAAM-011109 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Wideband Amplifier 10 MHz - 40 GHz |
| 文件： | 总8页 (文件大小：281K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Features
Functional Schematic
13 dB Gain
50 Ω Input/Output Match
+18 dBm Output Power
+5 V DC, 190 mA
Lead-Free 5 mm 9-lead LGA Package
RoHS* Compliant and 260°C Reflow Compatible
Description
The MAAM-011109 is an easy-to-use, wideband
amplifier that operates from 10 MHz - 40 GHz. The
device features 13 dB gain and +18 dBm of output
power. Matching is 50 Ω with typical return loss
better than 15 dB. This amplifier requires dual DC
supplies: 5 V (190 mA) and a low current
–5 V (<1 mA).
The MAAM-011109 integrates an ultra-broadband
bias choke, DC blocking and bypass capacitors.
Other features include a gate bias adjust pin to
change current setting for power or temperature, a
gain trim control pin that allows 15 dB of gain control
(0 to -1V), and a temperature compensated detector
pin that provides a DC voltage in relation to output
power.
Pin Configuratin
Pin No.
Pin Name
RFIN
VE
Function
1
2
3
4
5
6
RF Input
-5 V Supply
NC
No Connection
Gate Adjust (optional)
RF Output
The MAAM-011109 is ideally suited for any
application that requires 50 ꢀ gain from 10 MHz to
40 GHz. It is useful in applications where the
incoming signal varies over a broad bandwidth such
as laboratory, instrumentation, and defense
applications.
VG
RFOUT
VD
+5 V Supply
Vd Bypass (optional)
No Connection
7
BC
This device is housed in a leadless 5 X 5 X 1.3 mm
package that can be handled and placed with
standard pick and place assembly equipment. The
package base is a two layer laminate with overmold
fully compatible with PCB environment and wash
conditions. The module includes a GaAs MMIC that
is fully passivated for performance and reliability.
8
9
VDET
Vc
Power Detector
Gain Control
Ground
10
Paddle3
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Ordering Information1,2
Part Number
MAAM-011109
Package
bulk quantity
1000 piece reel
Sample board
MAAM-011109-TR1000
MAAM-011109-001SMB
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
1. Reference Application Note M513 for reel size information.
2. All sample boards include 3 loose parts.
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Electrical Specifications: TA = +25C, VD = +5 V, VE = -5 V, VC = Open, ZIN = ZOUT = 50 Ω
Parameter
Test Conditions
Units
Min.
Typ.
Max.
0.1 GHz
2 GHz
12 GHz
20 GHz
32 GHz
40 GHz
—
11.0
10.0
10.0
8.0
12.0
13.0
12.0
11.5
11.0
8.0
Gain
dB
—
—
Isolation
0.01 - 40 GHz
0.01 - 40 GHz
0.01 - 40 GHz
0.01 - 40 GHz
dB
dB
dB
dB
—
—
—
—
22
13
9
—
—
—
—
Input Return Loss
Output Return Loss
Noise Figure
3.5
0.1 GHz
10 GHz
40 GHz
+18
+17
+13
P1dB
dBm
—
—
0.1 GHz
10 GHz
40 GHz
+26
+24
+16
Output IP3
dBm
mA
—
—
—
—
Bias Current
VD = +5 V, VE = -5 V
170
Absolute Maximum Ratings4,5,6
Handling Procedures
Please observe the following precautions to avoid
damage:
Parameter
Absolute Max.
+17 dBm
Input Power
Drain Supply Voltage
Junction Temperature7
Operating Temperature
Storage Temperature
+8 Volts
+150°C
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1B devices.
-40°C to +85°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
6. Operating at nominal conditions with TJ ≤ 150°C will ensure
MTTF > 1 x 106 hours.
7. Junction Temperature (TJ) = TC + ӨJC * ((V * I) - (POUT - PIN))
Typical thermal resistance (ӨJC) = 21°C/W
a) For TC = 25°C,
TJ = 43°C @ 5 V, 190 mA, POUT = 20 dBm, PIN = 7 dBm
b) For TC = 85°C,
TJ = 103°C @ 5 V, 190 mA, POUT = 20 dBm, PIN = 7 dBm
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Application Information for DC & pins
Application Schematic
For proper MAAM-011109 operation a DC voltage
must be applied at the VE (-5V) and VD (+5V) pins in
that order. The optional VG pin maybe used to
override the automatic VE bias network to hard set
the gate. Adjusting VG from -0.2 V to -0.6 V will
change the quiescent current. If VG is used, VE
should be left unconnected.
9
8
7
6
5
1
The VC pin is typically left unconnected unless gain
control or output power limiting is desired. Please
refer to the “Variable Gain/Limiting” section for
detailed usage.
4
2
Paddle
The VD pin should be bypassed with at least 0.1 µF
for stability. For operation below 100 MHz a ferrite
bead (Murata BLM18BB471) must be inserted
between the VD pin and bypass capacitor. The VG
and VC pins must also be bypassed with a 0.1 µF
capacitor if operating below 100 MHz.
Recommended PCB Layout
The VDET pin is typically left unconnected unless a
voltage reference is desired that is correlated to the
output power. Please refer to the “Internal Detector”
section for detailed usage.
The BC pin is typically left unconnected unless gain
bandwidth and shape change is desired. Please
refer to an application note on this pin.
The input and output pins are internally DC blocked.
No more than +/- 12 V should ever be present on
these RF only pins.
Parts List
Component
Value
.22 µF
470 ꢀ
Package
0201
The backside paddle of the MAAM-011109 should
be connected to ground with as many vias as
possible to maximize high frequency performance,
thermal dissipation, and stability.
C1
L1
0603
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Typical Performance Curves over Temperature
Noise Figure
Gain
15
20
15
+25°C
-40°C
+85°C
10
5
10
+25°C
-40°C
+85°C
5
0
0
0
10
20
30
40
0
10
20
30
40
Frequency (GHz)
Frequency (GHz)
Output Return Loss
Input Return Loss
0
0
+25°C
-40°C
+85°C
-10
-10
-20
-30
-20
-30
+25°C
-40°C
+85°C
0
10
20
30
40
0
10
20
30
40
Frequency (GHz)
Frequency (GHz)
Output IP3
Output P1dB
30
30
+25°C
-40°C
+85°C
20
10
20
10
+25°C
-40°C
+85°C
0
0
0
0
10
20
30
40
10
20
Frequency (GHz)
30
40
Frequency (GHz)
4
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Typical Performance Curves vs. Voltage and Current
Noise Figure
Gain
20
15
10
5
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
15
10
5
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
0
0
0
10
20
Frequency (GHz)
30
40
40
40
0
10
20
Frequency (GHz)
30
30
30
40
40
40
Input Return Loss
Output Return Loss
0
0
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
-10
-20
-30
-10
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
-20
-30
0
10
20
30
0
10
20
Frequency (GHz)
Frequency (GHz)
Output IP3
Output P1dB
30
30
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
20
10
20
10
3.3 V, 150 mA
3.3 V, 190 mA
5 V, 150 mA
5 V, 190 mA
0
0
0
0
10
20
30
10
20
Frequency (GHz)
Frequency (GHz)
5
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Typical Performance Curves
Gain vs. Frequency, VC = -0.9 to 1.1 V
Isolation
20
0
+25°C
-40°C
+85°C
-10
10
0
-20
-30
-40
-50
-60
-10
-20
0
10
20
30
40
0
10
20
30
40
Frequency (GHz)
Frequency (GHz)
Stability Factor
Output Saturated Power
25
10
20
15
10
5
8
6
4
2
0
0
0
0
10
20
30
40
10
20
30
40
Frequency (GHz)
Frequency (GHz)
Low Frequency Response
Gain @ 5 GHz vs. Control Voltage
20
20
10
0
10
0
S21
S11
S22
-10
-20
-30
-10
-20
-1.2
-0.6
0
0.6
1.2
0.00
0.05
0.10
0.15
0.20
Voltage (V)
Frequency (GHz)
6
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Typical Performance Curves
VDET vs. Output Power @ 2 GHz
VDET vs. Output Power
4000
4000
2 GHz
10 GHz
25 GHz
+25°C
-40°C
+85°C
3500
3500
3000
3000
2500
2000
2500
2000
-10
-5
0
5
10
15
20
25
-10
-5
0
5
10
15
20
25
Output Power (dBm)
Output Power (dBm)
Current vs. Control Voltage
Current vs. Gate Voltage
300
300
3.3 V
5 V
250
250
200
150
100
50
200
150
100
50
0
0
-1.0
-0.5
0.0
0.5
1.0
-1.6
-1.4
-1.2
-1.0
-0.8
-0.6
-0.4
-0.2
Voltage (V )
Voltage (V )
C
G
7
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAAM-011109
Wideband Amplifier
10 MHz - 40 GHz
Rev. V1
Application Details
Bandwidth, Power, Noise and Linearity
VD and ID affect both the bandwidth (response
flatness), power available, noise figure, and linearity
of the amplifier. Higher currents and lower VD
increase high frequency gain but reduce the P1dB
and the OIP3 numbers. If the device is driven to
P1dB and on into PSAT the current, ID, will naturally
reduce. The device will return to the quiescent ID
value once the input power is reduced. Finally,
higher ID and VD values increase the device noise
figure.
Variable Gain/Limiting Applications
The gain of the MAAM-011109 can be easily
controlled with the VC pin. The gain reduction is
almost linear with VC between 0.1 V to -0.8 V. Below
-0.7 V internal ESD protection diodes will draw
increasing current (50 mA at -1.0 V). The VC pin
should not be driven below -1 V or above 1.2 V. The
nominal open circuit voltage at the VC pin is 0.8 V.
Reducing VC below 0.8 V will also reduce ID. Gain,
P1dB, and PSAT will all be reduced as VC is lowered.
Limiting applications and zero crossing adjustment
can be done by adjusting the VG and VC pins
together.
Temperature also affects the bandwidth, gain and
noise figure of the device. Lower temperatures
increase gain and bandwidth and reduce the noise
figure. Temperature has little effect on power and
linearity.
Internal Detector
The VDET pin is connected to an internal diode
detector. This pin should be connected to a high
impedance (>50 kꢀ) or left unconnected. The
detector is internally connected so that it responds
predominately to the power generated by the
amplifier. The detector has a low pass characteristic
which rolls off gradually above 2 GHz. The detector
is temperature compensated. Finally, even with zero
output power the detector has a DC output voltage
proportional to VD (nominally 2.8 V for VD = 5 V).
Broadband Amplifier Applications
The MAAM-011109 also has a low enough noise
figure to be used in instrumentation front ends and
buffer applications. It also has very flat response
with low group delay distortion so it can be used in
pulse applications. For higher gains multiple
amplifiers may be cascaded. It also makes a very
good low cost optical driver capable of delivering to
8 V p-p into 50 ꢀ.
Lead-Free 5 mm 9-lead LGA
All Dimensions are in mm
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 3 requirements.
Plating is gold over nickel.
8
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
相关型号：
©2020 ICPDF网 联系我们和版权申明