MADL-011015-001 [TE]
250 W Peak Power Limiter;型号: | MADL-011015-001 |
厂家: | TE CONNECTIVITY |
描述: | 250 W Peak Power Limiter |
文件: | 总6页 (文件大小:586K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
Features
Functional Schematic
54 dBm Peak Power Handling @ +85°C
50 dBm CW Power Handling @ +85°C
0.6 dB Insertion Loss (2.7 - 3.5 GHz)
15 dB Return Loss (2.7 - 3.5 GHz)
15 dBm Flat Leakage Power
Lead-Free 10.1 x 6.2 x 3.2 mm3 Package
2
RoHS* Compliant
Hermetic Seal1
1
RFIN
RFOUT
Description
3
The MADL-011015 is a lead-free surface mount,
high power limiter which integrates the equivalent of
17 PIN, Schottky, limiter diodes, capacitors,
inductors, and resistors in a compact ceramic
package. This device provides superior low and high
signal performance from 2 - 4 GHz without DC bias.
GND
Top view
Pin Configuration
The MADL-011015 is ideally suitable for higher peak
and CW power receiver-protector microwave circuits
applications where higher performance surface
mount limiter assemblies are required.
Pin No.
Pin Name
Description
1 (dot)
RFIN
RFOUT
RF Input
2
3
RF Output
Ground
Paddle2
2. The exposed paddle centered on the package bottom must
be connected to RF, DC, and thermal ground.
Ordering Information
MADL-011015-001
Bulk
MADL-011015-001SMB
Sample test board
1. Hermetic Seal provides fine leak rate < 5x10-8 atm·cc/s.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
Electrical Specifications: TA = +25°C, Z0 = 50 Ω (unless otherwise defined)
Parameter
Test Conditions
Units
Min.
Typ.
Max.
-10 dBm, 2.0 GHz
-10 dBm, 3.5 GHz
-10 dBm, 4.0 GHz
0.4
0.6
0.8
—
0.9
—
Insertion Loss
dB
—
-10 dBm, 2.0 GHz
-10 dBm, 3.5 GHz
-10 dBm, 4.0 GHz
25
15
13
Return Loss
dB
—
—
P1dB Input Compression Power
CW Incident Power3
3.5 GHz
3.5 GHz
dBm
dBm
dBm
—
—
—
—
—
—
14
51
56
15
30
0.3
—
—
—
—
—
—
Peak Incident Power3
Flat Leakage Power
1 ms pulse, 10% duty cycle, 3.5 GHz
+56 dBm, 1 ms pulse, 10% duty cycle, 3.5 GHz dBm
+56 dBm, 1 ms pulse, 10% duty cycle, 3.5 GHz dBm
+56 dBm, 1 ms pulse, 10% duty cycle, 3.5 GHz ergs
Spike Leakage Power
Spike Leakage Energy
Spike Leakage Time
( 3 dB below Peak Spike Power )
+56 dBm, 1 ms pulse, 10% duty cycle, 3.5 GHz
+56 dBm, 1 ms pulse, 10% duty cycle, 3.5 GHz
-10 dBm, F1 = 3.500 GHz, F2 = 3.510 GHz
ns
µs
—
—
—
30
3
—
—
—
Recovery Time
(1 dB of Insertion Loss)
Input 3rd Order
Intermodulation Products (IIP3)
dBm
25
3. Incident power ratings defined with 1.2:1 maximum source VSWR and 1.2:1 maximum load VSWR.
Absolute Maximum Ratings4,5
Peak Incident Power @ +85°C
54 dBm
1 ms pulse, 10% duty
Peak Incident Power @ +85°C
56 dBm
100 µs pulse, 10% duty
CW Incident Power @ +85°C
50 dBm
Junction Temperature6 (TJ)
Operating Temperature
Storage Temperature
175°C
-65°C to +125°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. MACOM does not recommend sustained operation near these
survivability limits.
6. Operating at nominal conditions with TJ ≤ +175°C will ensure
MTTF > 1 x 106 hours.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
Typical Performance Curves
Insertion Loss vs. Frequency
Input Return Loss vs. Frequency
0.0
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-0.2
-0.5
-0.7
-1.0
-1.2
-6
-12
-18
-24
-30
1.5
2.0
2.5
3.0
3.5
4.0
4.5
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Frequency (GHz)
Frequency (GHz)
Pulsed Flat Leakage Power vs. PIN
(1 ms Pulse, 10% Duty Cycle, 3.5 GHz)
CW Flat Leakage Power vs. PIN @ 3.5 GHz
20
20
10
10
0
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
-10
-20
-10
-20
10
20
30
40
50
60
10
20
30
40
50
60
Input Power (dBm)
Input Power (dBm)
Pulsed 1 dB Recovery Time vs. PIN
(1 ms Pulse, 10% Duty Cycle, 3.5 GHz)
Pulsed Spike Leakage Power vs. PIN
(1 ms Pulse, 10% Duty Cycle, 3.5 GHz)
40
30
20
10
0
4000
3000
2000
1000
0
+25°C
-40°C
+85°C
+25°C
-40°C
+85°C
40
45
50
55
60
40
45
50
55
60
Input Power (dBm)
Input Power (dBm)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
SMB Layout
SMB Parts List
Part
Quantity
Part Number
RF Connector
2
Johnson 142-0761-861
MADL-011015
Limiter
1
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
These devices are sensitive to electrostatic
discharge (ESD) and can be damaged by static
electricity. Proper ESD control techniques should
be used when handling these HBM Class 1A
devices.
Lead-Free 10.1 x 6.2 x 3.2 mm3 2-Lead package†
NOTES:
REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION.
ALL DIMENSIONS SHOWN AS INCHES/MM.
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Plating is Au over Ni over Cu.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
Application Section
Transmit-Receive Block Diagram
using the S Band MADL-011015 Limiter
Ant
Circulator
Circulator
LNA
PA
50 Ω High
Power Load
MADL-011015
Limiter
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MADL-011015
250 W Peak Power Limiter
2 - 4 GHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
spec-
ifications and product descriptions at any time, without notice. MACOM makes no commitment to update the in-
formation and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future chang-
es to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to
any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
相关型号:
©2020 ICPDF网 联系我们和版权申明