MAMO-000900-1291LB [TE]
I/Q Modulator/Demodulator 850 - 960 MHz; I / Q调制器/解调器850 - 960兆赫
| 型号： | MAMO-000900-1291LB |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | I/Q Modulator/Demodulator 850 - 960 MHz |
| 文件： | 总7页 (文件大小：253K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Features
MLP 6mm Package
ñ
ñ
ñ
ñ
ñ
ñ
ñ
Excellent Carrier Suppression ~40 dBc
6.0 dB Typical Modulator Conversion Loss
+9 to +13 dBm LO Drive
High 3x1 and 5x1 Harmonic Suppression
No External Matching Required
Circuit Side View
PIN
2 8
PIN 2 2
PI N Q
P IN
1
P I N 21
Low Cost Miniature Plastic MLP Package
Lead Free and RoHS Compliant
PIN 29
AREA
GND
PIN L O
PIN RF
Description and Application
M/A-COM's MAMO-000900-1291LT is a silicon
P IN
7
P I N 15
monolithic
850-960 MHz, medium barrier, I/Q
Modulator/Demodulator. Encapsulated in a low cost,
miniature surface mount PQFN 6mm square, 28-
lead plastic package the die utilizes M/A-COM‘s
unique HMIC silicon/glass process. This process
enables the realization of low loss passive elements
and efficient diode technology which in turn provides
excellent harmonic suppression. In addition, the
incorporated monolithic design techniques provide
unparalleled amplitude and phase imbalance
performance during demodulation thus adding to the
unit‘s overall versatility.
PI N
8
P IN
1 4
PI N I
PIN Configuration3
PIN
1
Function
GND
GND
GND
LO
PIN
15
Function
GND
GND
GND
RF
2
16
3
4
17
18
19
20
21
22
23
24
25
26
27
28
These modulators/demodulators are well suited for
GSM and CDMA Cellular basestation applications,
as well as most RFID systems, particularly where
small size and high performance are required.
Typical applications include quadrature modulation
requirements in wireless receivers and transmitters.
5
GND
GND
GND
GND
GND
GND
I
GND
GND
GND
GND
GND
GND
Q
6
7
8
9
10
11
12
13
14
Absolute Maximum Ratings1,2
GND
GND
GND
GND
GND
GND
Parameter
Maximum Ratings
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
Operating Temperature
Storage Temperature
Incident LO Power
-40 °C to +85 °C
-65 °C to +150 °C
+20 dBm C.W .
Ordering Information
Incident RF Power
+20 dBm C.W .
Part Number
Package
1. Exceeding these limits may cause permanent damage.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
MAMO-000900-1291LT
Tape and Reel
MAMO-000900-1291LB
Sample Test Board
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Electrical Specifications (Modulator): TA = 25ºC, Z0 = 50ꢀ
Parameter
Frequency Range
Test Conditions
Units
Min
Typ
Max
Output Power
900 MHz
850-960 MHz
LO Drive = +11 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO - 0.4 MHz
dBm
-14.5
-15
-13.5
-14
-
-
LO Carrier
Suppression
850-960 MHz
850-960 MHz
850-960 MHz
850-960 MHz
LO Drive = +11 dBm
I/Q = -7 dBm, I/Q = 400 kHz
dBc
dBc
dBc
dBc
36
28
50
78
42
38
58
85
-
-
-
-
F
RF = FLO - 0.4 MHz
SSB Rejection4
LO Drive = +11 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 0.4 MHz
3 x 1 Harmonic
Suppression
LO Drive = +11 dBm
I/Q = -7 dBm, I/Q = 400 kHz
FRF = FLO + 1.2 MHz
5 x 1 Harmonic
Suppression
LO Drive = +11 dBm
I/Q = -7 dBm, I/Q = 400 kHz
F
RF = FLO + 2.0 MHz
ACPR CDMA 20005
Output Noise Floor
LO Port Return Loss
900 MHz Carrier Freq
850-960 MHz
LO Drive = +11 dBm
BB AC Voltage = 275mVp-p
dBc
dBm/Hz
dB
67
-
74
-161
29
-
-
-
LO Drive = +11 dBm
I/Q Power level = -7 dBm
850-960 MHz
LO Drive = +11 dBm
I/Q Power level = -7 dBm
FRF = FLO + 0.4 MHz
20
RF Port Return Loss
IF Bandwidth
850-960 MHz
LO Drive = +11 dBm
I/Q Power level = -7 dBm
FRF = FLO + 0.4 MHz
dB
6
9
-
-
-
850 ≤ LO ≤ 970 MHz
LO Drive = +11 dBm
MHz
65
I/Q Power level = -7 dBm
4. W hen the LO frequency is greater than the RF frequency, the upper sideband is suppressed.
5. The Baseband I and Q input signals were generated using the following settings in the Agilent E3844C Vector Signal Generator:
FW D CDMA2000 SR1 Pilot
Filter: IS-95 Mod w/EQ
Link: Forward
IQ Mod Filter: Through
PRE Clip: 100.0 %
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Modulator Band Performance 850-960 MHz
0
-20
SSB REJECTION
-40
CARRIER SUPPRESSION
-60
3rd HARMONIC
-80
5th HARMONIC
-100
-120
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Modulator/Demodulator Return Loss 850-960 MHz
0
-5
R Port
-10
-15
-20
L Port
-25
-30
-35
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY(MHz)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Output Power 850-960 MHz
-10
-11
-12
-13
-14
-15
-16
-17
-18
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Output Noise Floor
-100
-120
-140
-160
-180
Output Noise Floor
System Noise Floor
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (M Hz)
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
•
•
•
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Electrical Specifications (Demodulator) @ +25 °C, Z0 = 50ꢀ
Parameter
Frequency Range
Test Conditions
Units
Min
Typ
Max
Conversion Loss
900 MHz
850-960 MHz
LO Drive = +11 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
-
-
12.2
12.6
13
14
Amplitude
Imbalance
850-960 MHz
850-960 MHz
850-960 MHz
LO Drive = +11 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
dB
deg
dBm
-
-
0.06
1.0
0.3
3.0
-
Phase
LO Drive = +11 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
Imbalance6
Input IP3
LO Drive = +11 dBm
21.5
23.5
RF Input = -7 dBm (each tone)
Tone 1 is 10 MHz above LO Freq
Tone 2 is 11 MHz above LO Freq
Input 1dB
Compression
900 MHz
850-960 MHz
LO Drive = +11 dBm
FRF = FLO + 0.4 MHz
dBm
MHz
dB
7
8.6
-
-
-
-
IF Bandwidth
-
850 MHz ≤ LO ≤ 970 MHz
FRF = FLO + FIF; 0 ≤ FIF ≤ 65 MHz
65
20
LO Return Loss
850-960 MHz
LO Drive = +11 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
26
RF Return Loss
850-960 MHz
LO Drive = +11 dBm
RF Power Level = -10 dBm
RF Input = -7 dBm
dB
6
9
-
F
RF = FLO + 0.4 MHz
6. W hen the LO frequency is greater than the RF frequency, the —Q“ output leads the —I“ output by 90 degrees nominal.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
•
•
•
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Demodulator Conversion Loss 850-960 MHz
-11
-12
PLO = 13dBm
PLO = 11dBm
-13
PLO = 9dBm
-14
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
Demodulator Input IP3 and Input 1dB Compression 850-960 MHz
30
IIP3 @ 13dBmLO
IIP3 @ 9dBm LO
25
20
15
10
5
IIP3 @ 11dBm LO
Input 1dB Compression @ 11dBm LO
0
850
860
870
880
890
900
910
920
930
940
950
960
FREQUENCY (MHz)
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
•
•
•
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
I/Q Modulator/Demodulator
8 5 0 -9 6 0 MH z
MA MO -0 0 0 9 0 0 -1 2 9 1 LT
V 2
Demodulator Phase and Amplitude Imbalance 850-960 MHz
3.5
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Phase Imbalance @ 9 dBm LO
3
2.5
2
Phase Imbalance @ 13 dBm LO
1.5
Phase Imbalance @ 11 dBmLO
1
Amplitude Imbalance @ 9, 11, 13 dBm LO
0.5
0
850 860 870 880 890 900 910 920 930 940 950 960
FREQUENCY (MHz)
MAMO-000900-1291MT Outline œ 6mm PQFN, 28-Lead
7
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
•
•
•
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明