MASWSS0006TR-3000 [TE]
GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz; 砷化镓SPDT 2.5 V大功率开关DC - 3.0 GHz的
| 型号： | MASWSS0006TR-3000 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | GaAs SPDT 2.5 V High Power Switch DC - 3.0 GHz |
| 文件： | 总3页 (文件大小：78K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MASWSS0006
GaAs SPDT 2.5 V High Power Switch
DC - 3.0 GHz
Rev. V4
Features
Functional Schematic
•
•
Low Voltage Operation: 2.5 V
Excellent Harmonics: <-67 dBc at +34 dBm & 1.0
GHz
PIN 1
PIN 6
•
•
•
•
Low Insertion Loss: 0.40 dB at 1.0 GHz
High Isolation: 20 dB at 2.0 GHz
SOT-26 Package
RF1
V1
100pF
GND
RF2
RFC
V2
0.5 micron GaAs PHEMT Process
100pF
Description
100pF
M/A-COM’s MASWSS0006 is a GaAs PHEMT
MMIC single pole double throw (SPDT) high power
switch in a low cost SOT-26 package.
The
MASWSS0006 is ideally suited for applications
where high power, low control voltage, low insertion
loss, high isolation, small size and low cost are re-
quired.
Pin Configuration
Pin No.
Pin Name
Description
RF Port 1
1
2
3
4
5
6
RF1
GND
RF2
V2
RF Ground
RF Port 2
Typical applications are for GSM and DCS handset
systems that connect separate transmit and receive
functions to a common antenna, as well as other
related handset and general purpose applications.
This part can be used in all systems operating up to
3.0 GHz requiring high power at low control voltage.
Control 2
RFC
V1
RF Common Port
Control 1
Absolute Maximum Ratings 2,3
The MASWSS0006 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and reliabil-
ity.
Parameter
Absolute Maximum
Input Power
(0.5 - 3.0 GHz, 2.5 V Control)
+38 dBm
Voltage
±8.5 volts
Ordering Information1
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +150°C
Part Number
Package
Bulk Packaging
1000 piece reel
3000 piece reel
Sample Test Board
MASWSS0006
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
MASWSS0006TR
MASWSS0006TR-3000
MASWSS0006SMB
Truth Table 4,5
1. Reference Application Note M513 for reel size information.
V1
V2
ANT– RF1 ANT - RF2
1
0
0
1
On
Off
Off
On
4. Differential voltage, V (state 1) - V (State 0), must be +2.5 V
minimum.
5. 0 = -5 V to 2.5 V, 1 = -2.5 V to +5 V.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASWSS0006
GaAs SPDT 2.5 V High Power Switch
DC - 3.0 GHz
Rev. V4
Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 6
Parameter
Test Conditions
Units
Min.
Typ.
Max.
DC – 1.0 GHz
1.0 – 2.0 GHz
2.0 - 3.0 GHz
dB
dB
dB
—
—
—
0.40
0.50
0.75
0.65
0.75
Insertion Loss7
DC – 1.0 GHz
1.0 – 2.0 GHz
2.0 - 3.0 GHz
dB
dB
dB
23.0
17.5
—
26
20
16
—
—
—
Isolation
DC – 2.0 GHz
2.0 - 3.0 GHz
dB
dB
—
—
20
16
—
—
Return Loss
IP3
Two Tone, +26 dBm / tone, 5 MHz Spacing
> 50 MHz
dBm
—
57
—
P0.1dB
2nd Harmonic
3rd Harmonic
Trise, Tfall
Ton, Toff
—
dBm
dBc
dBc
uS
—
—
—
—
—
39
-75
—
-67
-67
—
1.0 GHz, PIN = +34 dBm
1.0 GHz, PIN = +34 dBm
-75
10% to 90% RF, 90% to 10% RF
50% control to 90% RF, and 50% control to 10% RF
0.04
0.06
uS
—
Transients
In Band
mV
uA
—
—
50
—
—
Gate Leakage
50
6. External DC blocking capacitors are required on all RF ports.
7. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 100 pF for 0.5 - 3.0 GHz.
SOT-26 Plastic Package†
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
† Meets JEDEC moisture sensitivity level 1 requirements
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MASWSS0006
GaAs SPDT 2.5 V High Power Switch
DC - 3.0 GHz
Rev. V4
Typical Performance Curves vs. Temperature, 100 pF blocking capacitors
Insertion Loss vs. Frequency
Isolation vs. Frequency
1.0
40
35
30
25
20
15
10
5
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
0.8
0.6
0.4
0.2
0.0
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Frequency (GHz)
Frequency (GHz)
3rd Harmonic vs. Control Voltage,
Pin = 34 dBm CW, 1 GHz
2nd Harmonic vs. Control Voltage,
Pin = 34 dBm CW, 1 GHz
-60
-65
-70
-75
-80
-85
-90
-60
-65
-70
-75
-80
-85
-90
25°C
-40°C
85°C
25°C
-40°C
85°C
2.0
2.5
3.0
3.5
4.0
4.5
5.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
V (V)
V (V)
C
C
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明