MASWSS0117 [TE]

GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz; 砷化镓SPDT 2.7 V大功率开关DC - 3.0 GHz的
MASWSS0117
型号: MASWSS0117
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz
砷化镓SPDT 2.7 V大功率开关DC - 3.0 GHz的

开关 光电二极管
文件: 总3页 (文件大小:129K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
GaAs SPDT 2.7 V High Power Switch  
DC - 3.0 GHz  
MASWSS0117  
V2  
Features  
Functional Block Diagram  
Low Voltage Operation: 2.7 V  
High IP3: +56 dBm  
Low Insertion Loss: 0.30 dB at 1 GHz  
High Isolation: 25 dB at 1 GHz  
SC70 6-Lead Package  
RF1  
V1  
39 pF  
0.5 micron GaAs PHEMT Process  
GND  
RFC  
Description  
39 pF  
M/A-COM’s MASWSS0117 is a GaAs PHEMT  
MMIC single pole double throw (SPDT) high power  
switch in a low cost SC70 6-lead package. The  
MASWSS0117 is ideally suited for applications  
where high power, low control voltage, low insertion  
loss, high isolation, small size and low cost are  
required.  
RF2  
V2  
39 pF  
Pin 6  
Pin 1  
Pin Configuration  
Typical applications are for CDMA  
handset  
Pin No.  
Pin Name  
V2  
Description  
Vcontrol 2  
RF Common  
Vcontrol 1  
RF Port 1  
systems that connect separate transceiver and/or  
GPS functions to a common antenna, as well as  
other related handset and general purpose  
applications. The MASWSS0117 can be used in all  
systems operating up to 3.0 GHz requiring high  
power at low control voltage.  
1
2
3
4
5
6
RFC  
V1  
RF1  
GND  
RF2  
RF Ground  
RF Port 2  
The MASWSS0117 is fabricated using a 0.5 micron  
gate length GaAs PHEMT process. The process  
features full passivation for performance and  
reliability.  
MASWSS0117 orientation in tape  
Ordering Information1  
Part Number  
MASWSS0117  
Package  
Bulk Packaging  
1000 piece reel  
3000 piece reel  
Sample Test Board  
MASWSS0117TR  
MASWSS0117TR-3000  
MASWSS0117SMB  
MASWSS0117 Device Marking  
PIN 1  
1. Reference Application Note M513 for reel size information.  
PART NUMBER  
DATE CODE  
PIN 6  
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
GaAs SPDT 2.7 V High Power Switch  
DC - 3.0 GHz  
MASWSS0117  
V2  
Electrical Specifications: TA = 25°C, VC = 0 V / 2.7 V, Z0 = 50 2  
Parameter  
Test Conditions  
Units  
Min.  
Typ.  
Max.  
DC – 1 GHz  
1 – 2 GHz  
2 - 3 GHz  
dB  
dB  
dB  
0.30  
0.35  
0.35  
0.65  
Insertion Loss3  
DC – 1 GHz  
1 – 2 GHz  
2 - 3 GHz  
dB  
dB  
dB  
23  
25  
19  
15  
Isolation  
Return Loss  
IP3  
DC – 3 GHz  
dB  
20  
56  
825 MHz  
dBm  
Two Tone, +24 dBm Total Pin, 5 MHz Spacing  
For Cell Band: Two-tone signal input: Tx1 = +22 dBm @  
820 MHz, Tx2 = +22 dBm @ 821 MHz,  
dBm  
dBm  
-99  
-94  
RX interfere = -23 dBm @ 869 MHz.  
Cross Modulation  
For PCS Band: Two-tone signal input: Tx1 = +18 dBm @  
1880 MHz, Tx2 = +18 dBm @ 1881 MHz,  
RX interfere = -23 dBm @ 1960 MHz.  
P0.1dB  
1.0 GHz  
dBm  
nS  
38  
70  
Trise, Tfall  
10% to 90% RF, 90% to 10% RF  
50% control to 90% RF  
50% control to 10% RF  
Ton, Toff  
nS  
100  
Transients  
In Band  
mV  
µA  
25  
5
Control Current  
VC = 2.7 V  
20  
2. For positive voltage control, external DC blocking capacitors are required on all RF ports.  
3. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz.  
Absolute Maximum Ratings 4,5  
Truth Table 6,7,8  
V1  
1
V2  
ANT– RF1 ANT - RF2  
Parameter  
Absolute Maximum  
0
1
On  
Off  
Off  
On  
Input Power  
(0.5 - 3 GHz, 3 V Control)  
+38 dBm  
0
Operating Voltage  
Operating Temperature  
Storage Temperature  
+8.5 volts  
6. For positive voltage control, external DC blocking capacitors  
are required on all RF ports.  
7. Differential voltage, V (state 1) - V (state 0), must be +2.7 V  
minimum, but must not exceed 8.5 V.  
-40°C to +85°C  
-65°C to +150°C  
8. 0 = -5 V to +2.3 V, 1 = -2.3 V to +5 V.  
4. Exceeding any one or combination of these limits may cause  
permanent damage to this device.  
5. M/A-COM does not recommend sustained operation near  
these survivability limits.  
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  
GaAs SPDT 2.7 V High Power Switch  
DC - 3.0 GHz  
MASWSS0117  
V2  
Typical Performance Curves vs. Frequency, 39 pF  
Insertion Loss  
Isolation  
0.6  
40  
30  
20  
10  
0
+25°C  
+85°C  
-40°C  
+25°C  
+85°C  
-40°C  
0.5  
0.4  
0.3  
0.2  
0.1  
0.0  
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
0.5  
1.0  
1.5  
2.0  
2.5  
3.0  
Frequency (GHz)  
Frequency (GHz)  
Return Loss  
Qualification  
0
+25°C  
-40°C  
+85°C  
Qualified to M/A-COM specification REL-201,  
Process Flow –2.  
-5  
-10  
-15  
-20  
-25  
-30  
Handling Procedures  
Please observe the following precautions to avoid  
damage:  
Static Sensitivity  
Gallium Arsenide Integrated Circuits are sensitive  
to electrostatic discharge (ESD) and can be  
damaged by static electricity. Proper ESD control  
techniques should be used when handling these  
devices.  
-35  
0
1
2
3
4
5
6
Frequency (GHz)  
SC-70 Plastic Package†  
Meets JEDEC moisture sensitivity level 1 requirements.  
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the  
product(s) or information contained herein without notice. M/A-COM makes  
no warranty, representation or guarantee regarding the suitability of its  
products for any particular purpose, nor does M/A-COM assume any liability  
whatsoever arising out of the use or application of any product(s) or  
information.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macom.com for additional data sheets and product information.  

相关型号:

MASWSS0117SMB

GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz
TE

MASWSS0117TR

GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz
TE

MASWSS0117TR-3000

GaAs SPDT 2.7 V High Power Switch DC - 3.0 GHz
TE

MASWSS0117_V3

GaAs SPDT 2.7 V High Power Switch
TE

MASWSS0118

GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz
TE

MASWSS0118SMB

GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz
TE

MASWSS0118TR

GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz
TE

MASWSS0118TR-3000

GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz
TE

MASWSS0121

SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz
TE

MASWSS0121SMB

SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz
TE

MASWSS0121TR

SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz
TE

MASWSS0121TR-3000

SPDT High Isolation Terminated Switch 0.5 - 3.0 GHz
TE