MD-169 [TE]
Termination Insensitive Mixer, 1 MHz - 3.5 GHz; 终止不敏感搅拌机， 1兆赫 - 3.5 GHz的
| 型号： | MD-169 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Termination Insensitive Mixer, 1 MHz - 3.5 GHz |
| 文件： | 总4页 (文件大小：168K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Termination Insensitive Mixer,
1 MHz - 3.5 GHz
MD-/MDC-/MDS-169
V5
Features
FP-2 (MD-169)
•
Intermodulation Ratio is Insensitive to Port
Mismatches
•
•
•
•
VSWR: <2.0:1 Typical Midband
Isolation: 35 dB Typical Midband
Impedance: 50 Ohms Nominal
Maximum Input Power: 350 mW Max @ 25°C,
Derated to 85°C @ 3.2 mW/°C
LO Power: +24 dBm Max.
•
•
MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive
mixer (TIM) enables it to apply high reverse voltage
to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with
minimum distortion. In addition the TIM has internal
loads that provide a good match and also absorb
mixer generated LO frequency terms. Combined,
these
features
give
the
mixer
its
insensitivity to external mismatches, plus superior
VSWR.
C-7 (MDC-169)
SF-1 (MDS-169)
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Termination Insensitive Mixer,
1 MHz - 3.5 GHz
MD-/MDC-/MDS-169
V5
Electrical Specifications1: TA = -55°C to +85°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Frequency Range
RF, LO Ports
IF Port
0.001 - 3.5
5 - 1500
GHz
MHz
—
—
—
—
—
—
Conversion Loss
5 - 1000 MHz2
5 - 3000 MHz3
1 - 3500 MHz
dB
dB
dB
—
—
—
—
—
—
7
8
10
Isolation
LO to RF
LO to IF
RF to IF
5 - 1000 MHz
1 - 3500 MHz
dB
dB
30
20
—
—
—
—
5 - 1000 MHz
1 - 3500 MHz
dB
dB
30
20
—
—
—
—
10 - 500 MHz
1 - 3000 MHz
1 - 3500 MHz
dB
dB
dB
30
20
18
—
—
—
—
—
—
RF Input
1 dB Compression
1 dB Desensitization
—
—
dBm
dBm
—
—
+7
+5
—
—
SSB Noise Figure
Within 1 dB of Conversion Loss
Max
—
—
—
—
—
Typical Two-Tone IM
Ratio
with a –10 dBm input, each tone
625 MHz and 35 MHz IF
10 MHz
500 MHz
3000 MHz
dB
dB
dB
—
—
—
55
58
56
—
—
—
3rd Order
Intermodulation Ratio
Degradation
@ IF VSWR 3:1
—
dB
—
3
—
1. All specifications apply when operated at +10 dBm available LO power with 50 Ohm source and load impedance.
2. For IF Frequencies of 5 - 300 MHz and RF of –10 dBm or less.
3. For MDC-169, add 1.0 dB to conversion loss.
Electrical Specifications (MDS-169): TA = -55°C to +85°C
Frequency: RF, LO Ports = 1 - 3500 MHz, IF Port = 5-1500 MHz
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Conversion Loss
LO @ +10 dBm
IF @ 60 MHz
5 - 1000 MHz
1000 - 3000 MHz
1 - 3500 MHz
dB
dB
dB
—
—
—
6.5
7.5
8.0
7.0
9.0
10.0
Isolation
LO to RF
LO to IF
RF to IF
5 - 1000 MHz
1 - 3500 MHz
dB
dB
30
20
35
25
—
—
5 - 1000 MHz
1 - 3500 MHz
dB
dB
30
20
35
25
—
—
10 - 500 MHz
1 - 3000 MHz
1 - 3500 MHz
dB
dB
dB
30
20
18
35
25
23
—
—
—
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Termination Insensitive Mixer,
1 MHz - 3.5 GHz
MD-/MDC-/MDS-169
V5
Pin Configuration (MD-169)
Pin Configuration (MDS-169)
Pin No.
Function
GND
GND
GND
IF
Pin No.
Function
LO
Pin No.
Function
GND
Pin No.
Function
LO
1
2
3
4
5
6
7
8
1
2
3
4
GND
GND
RF
IF
RF
Absolute Maximum Ratings (MDS-169) 4
Bottom View of SF-1
Parameter
Max Input Power5
Total Power
Absolute Maximum
350 mW Derated at 85oC @
3.2 mW/oC
LO Power
+24 dBm
4. Operation of this device above any one of these parameters
may cause permanent damage.
5. Ambient Temperature (TA) = +25oC
Typical Performance Curves
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Termination Insensitive Mixer,
1 MHz - 3.5 GHz
MD-/MDC-/MDS-169
V5
Typical Performance Curves
Ordering Information
Part Number
Package
MD-169 PIN
FP-2
C-7
MDC-169 SMA
MDS-169
SF-1
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号：
©2020 ICPDF网 联系我们和版权申明