RTD14012F [TE]
1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact;型号: | RTD14012F |
厂家: | TE CONNECTIVITY |
描述: | 1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact PC 光电二极管 继电器 |
文件: | 总3页 (文件大小:567K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
General Purpose Relays
PCB Relays
Potter & Brumfield
Power PCB Relay RT1
n
n
n
n
1 pole 12A/16A, 1 form C (CO) or 1 form A (NO) contact
Sensitive coil 400mW
5kV/10mm coil-contact, reinforced insulation
Ambient temperature 85°C
Typical applications
Boiler control, timers, garage door control, POS automation, interface
modules
V Z b
Approvals
VDE REG.-Nr. 6106, UL E214025, cCSAus 14385
Technical data of approved types on request
Contact Data (continued)
Contact ratings
Type
Load
Cycles
6x103
6x103
6x103
Contact Data
12A
16A
RT3, RTD
RT3, RTD
RT3, RTD
RT3, RTD
RT3, RTD
RT3, RTD
RT3, RTD
1 HP @ 480VAC* motor
1 HP @ 240VAC* motor
1/2 HP @ 120VAC* motor
60 LRA/10 FLA @ 250VAC* motor
TV-5 @ 120VAC* Tungsten
A300, 720VA @ 240VAC* Pilot Duty
B300, 360VA @ 240VAC** Pilot Duty
Contact arrangement
1 form C (CO) or 1 form A (NO)
Rated voltage
Max. switching voltage
Rated current
250VAC
400VAC
30x103
25x103
30x103
30x103
12A
12A
16A
16A, UL: 20A
Limiting continuous current
Limiting making current
max. 4s, duty factor 10%
Breaking capacity max.
Contact Material
Frequency of operation, with/without load
Operate/release time max., DC coil
Bounce time max., DC coil, form A/form B
*) form A (NO) contact only, **) form B (NC) contact only
25A
3000VA
30A
4000VA
AgNi 90/10
Mechanical endurance
>30x106 operations
360/72000h-1
8/6ms
4/6ms
Coil Data
Coil voltage range
5 to 110VDC
Contact ratings
Operative range, IEC 61810
Coil insulation system according UL
2
Type
Contact
Load
Cycles
class F
IEC 61810
RT314 DC-coil A (NO)
RT314 DC-coil C (CO)
RT314 DC-coil A (NO)
RT114 DC-coil A (NO)
RT114 AC-coil A (NO)
UL 508
RT314
RT334
RT314
EN60947-5-1
16A, 250VAC, cosφ=1, 85°C
16A, 250VAC, cosφ=1, 85°C
10A, 400VAC, cosφ=1, 85°C
12A, 250VAC, cosφ=1, 85°C
12A, 250VAC, cosφ=1, 70°C
30x103
10x103
Coil versions, DC coil
Coil
code
Rated
voltage
VDC
5
Operate
voltage
VDC
3.5
Release
voltage
VDC
0.5
Coil
resistance
Ω 10%
62
Rated coil
power
mW
150x103
50x103
100x103
005
006
009
012
024
048
403
400
6
9
4.2
0.6
90
A/B (NO/NC) 20A, 250VAC, general purpose, 85°C 6x103
6.3
8.4
0.9
1.2
200
360
400
400
A (NO)
A (NO)
16A, 250VAC, gen. purpose, 85°C
1hp, 240VAC, 40°C
50x103
1x103
12
24
48
16.8
33.6
2.4
4.8
1440
5520
400
417
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
RT314 DC-coil A/B (NO/NC) 2A, 24VDC, DC13
6.050
EN60730-1
RT314 DC-coil A (NO)
12(2)A, 250VAC, 85°C
100x103
1
04-2011, Rev. 0411
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
General Purpose Relays
PCB Relays
Potter & Brumfield
Power PCB Relay RT1 (Continued)
Insulation Data
Other Data (contiinued)
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
Terminal type
Weight
PCB-THT, plug-in
14g
1000Vrms
5000Vrms
Resistance to soldering heat THT, IEC 60068-2-20
RTII
270°C/10s
between contact and coil
Material group of insulation parts
Tracking index of relay base
≥10/10mm
IIIa
PTI 250V
RTIII
Packaging/unit
260°C/5s
tube/20 pcs., box/500 pcs.
Accessories
Other Data
For details see datasheet
Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays
(according IEC 61810-1); for relays mounted on sockets deratings may apply.
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40 to 85°C
Category of environmental protection
IEC 61810
RTII - flux proof, RTIII - wash tight
Vibration resistance (functional)
form A/form B contact, 30 to 500Hz
Shock resistance (destructive)
20g/5g
100g
Dimensions
S0272-BB
PCB layout / terminal assignment
Bottom view on solder pins
*) With the recommended PCB hole sizes a grid
pattern from 2.5mm to 2.54mm can be used.
12A, pinning 3.5mm
12A, pinning 5mm
16A, pinning 5mm
S0418-CB
S0418-CN
S0418-CA
1 form C (CO) contact
1 form C (CO) contact
1 form C (CO) contact
S0163-BG
S0163-BC
S0163-BE
1 form A (NO) contact
1 form A (NO) contact
1 form A (NO) contact
S0163-BH
S0163-BD
S0163-BF
2
04-2011, Rev. 0411
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
General Purpose Relays
PCB Relays
Potter & Brumfield
Power PCB Relay RT1 (Continued)
Product code structure
Type
Typical product code RT
3
1
4
024
F
RT Power PCB Relay RT1
Version
1
2
3
B
D
12A, pinning 3.5mm, flux proof
12A, pinning 5mm, flux proof *)
16A, pinning 5mm, flux proof
12A, pinning 3.5mm, wash tight
16A, pinning 5mm, wash tight
Contact arrangement
1
3
1 form C (CO) contact
1 form A (NO) contact
Contact material
4
AgNi 90/10
Coil
Coil code: please refer to coil versions table
Version
F
Standard version
Product code
RT114012F
RT114024F
RT134012F
RT134024F
RT314005F
RT314012F
RT314024F
RT334012F
RT334024F
RTB14005F
RTB14012F
RTB14024F
RTB34012F
RTD14005F
RTD14012F
RTD14024F
RTD34012F
RTD34024F
Version
12A, pinning 3.5mm,
flux proof
Contacts
1 form C (CO)
contact
1 form A (NO)
contact
1 form C (CO)
contact
Contact material
Coil
Part number
1419108-2
AgNi 90/10
12VDC
24VDC
12VDC
24VDC
5VDC
1419108-3
5-1415020-1
2-1393242-1
1419108-8
16A, pinning 5mm,
flux proof
12VDC
24VDC
12VDC
24VDC
5VDC
12VDC
24VDC
12VDC
5VDC
12VDC
24VDC
12VDC
24VDC
2-1393237-2
2-1393237-3
2-1393237-5
2-1393237-7
2-1419108-4
2-1419108-5
2-1419108-6
2-1419108-7
2-1419108-8
2-1419108-9
3-1419108-1
3-1419108-6
3-1419108-9
1 form A (NO)
contact
1 form C (CO)
contact
12A, pinning 3.5mm,
wash tight
1 form A (NO)
1 form C (CO)
contact
16A, pinning 3.5mm,
wash tight
1 form A (NO)
contact
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request
3
04-2011, Rev. 0411
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明