74ALVC162835DLG4 [TI]
18-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS; 18位通用总线驱动器,具有三态输出型号: | 74ALVC162835DLG4 |
厂家: | TEXAS INSTRUMENTS |
描述: | 18-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS |
文件: | 总12页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
FEATURES
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
•
Member of the Texas Instruments Widebus™
Family
1
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
NC
NC
GND
NC
•
•
•
•
Operates From 1.65 V to 3.6 V
Max tpd of 2 ns at 3.3 V
2
3
Y1
GND
Y2
A1
GND
A2
±12-mA Output Drive at 3.3 V
4
Ideal for Use in PC100 Register DIMM,
Revision 1.1
5
6
Y3
A3
•
Output Port Has Equivalent 26-Ω Series
Resistors, So No External Resistors Are
Required
7
V
CC
V
CC
8
Y4
Y5
Y6
GND
Y7
Y8
A4
A5
A6
GND
A7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
•
•
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
A8
Y9
A9
Y10
Y11
Y12
GND
Y13
Y14
Y15
A10
A11
A12
GND
A13
A14
A15
– 1000-V Charged-Device Model (C101)
DESCRIPTION/ORDERING INFORMATION
This 18-bit universal bus driver is designed for 1.65-V
to 3.6-V VCC operation.
Data flow from
A to Y is controlled by the
V
CC
V
CC
output-enable (OE) input. The device operates in the
transparent mode when the latch-enable (LE) input is
high. When LE is low, the A data is latched if the
clock (CLK) input is held at a high or low logic level. If
LE is low, the A data is stored in the latch/flip-flop on
the low-to-high transition of CLK. When OE is high,
the outputs are in the high-impedance state.
Y16
Y17
GND
Y18
OE
A16
A17
GND
A18
CLK
GND
LE
To ensure the high-impedance state during power up
or power down, OE should be tied to VCC through a
pullup resistor; the minimum value of the resistor is
determined by the current-sinking capability of the
driver.
NC − No internal connection
The output port includes equivalent 26-Ω series
resistors to reduce overshoot and undershoot.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
Tube
SN74ALVC162835DL
SSOP - DL
ALVC162835
Tape and reel
Tape and reel
Tape and reel
SN74ALVC162835DLR
SN74ALVC162835DGGR
SN74ALVC162835DGVR
-40°C to 85°C
TSSOP - DGG
TVSOP - DGV
ALVC162835
VC2835
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 1998–2004, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
FUNCTION TABLE
INPUTS
OUTPUT
Y
OE
H
L
LE
CLK
A
X
L
X
H
H
L
X
Z
L
X
L
X
H
L
H
L
L
↑
↑
L
L
H
X
H
(1)
L
L
L or H
Y0
(1) Output level before the indicated steady-state input conditions were
established
LOGIC DIAGRAM (POSITIVE LOGIC)
27
OE
30
CLK
28
54
LE
A1
1D
C1
3
Y1
CLK
To 17 Other Channels
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
MIN
-0.5
-0.5
-0.5
MAX
4.6
UNIT
VCC
VI
Supply voltage range
Input voltage range(2)
Output voltage range(2)(3)
V
4.6
VCC + 0.5
-50
V
VO
IIK
V
Input clamp current
VI < 0
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
-50
Continuous output current
Continuous current through each VCC or GND
±50
±100
64
DGG package
DGV package
DL package
θJA
Package thermal impedance(4)
48
°C/W
56
Tstg
Storage temperature range
-65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
RECOMMENDED OPERATING CONDITIONS(1)
MIN
MAX UNIT
VCC
Supply voltage
1.65
3.6
V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V
0.65 × VCC
VIH
High-level input voltage
1.7
2
V
0.35 × VCC
VIL
Low-level input voltage
0.7
0.8
3.6
VCC
-2
V
VI
Input voltage
0
0
V
V
VO
Output voltage
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
-6
IOH
High-level output current
Low-level output current
mA
mA
-8
-12
2
VCC = 1.65 V
VCC = 2.3 V
VCC = 2.7 V
VCC = 3 V
6
IOL
8
12
10
85
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
ns/V
TA
-40
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
1.65 V to 3.6 V
1.65 V
2.3 V
MIN TYP(1)
VCC - 0.2
MAX
UNIT
IOH = -100 µA
IOH = -2 mA
IOH = -4 mA
1.2
1.9
1.7
2.4
2
VOH
2.3 V
V
IOH = -6 mA
3 V
IOH = -8 mA
IOH = -12 mA
IOL = 100 µA
IOL = 2 mA
IOL = 4 mA
2.7 V
3 V
2
1.65 V to 3.6 V
1.65 V
2.3 V
0.2
0.45
0.4
VOL
2.3 V
0.55
0.55
0.6
V
IOL = 6 mA
3 V
IOL = 8 mA
2.7 V
IOL = 12 mA
3 V
0.8
II
VI = VCC or GND
VO = VCC or GND
VI = VCC or GND,
3.6 V
±5
µA
µA
µA
µA
IOZ
ICC
∆ICC
3.6 V
±10
40
IO = 0
3.6 V
One input at VCC - 0.6 V,
Other inputs at VCC or GND
3 V to 3.6 V
750
Control inputs
Data inputs
3.5
5
Ci
VI = VCC or GND
3.3 V
3.3 V
pF
pF
Co Outputs
VO = VCC or GND
7
(1) All typical values are at VCC = 3.3 V, TA = 25°C.
TIMING REQUIREMENTS
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 1.8 V
VCC = 2.7 V
UNIT
MIN
MAX MIN MAX MIN MAX
MIN
MAX
150
(1)
fclock
tw
Clock frequency
Pulse duration
150
150
MHz
ns
(1)
(1)
(1)
(1)
(1)
(1)
(1)
LE high
3.3
3.3
2.2
1.9
1.3
0.6
1.4
3.3
3.3
2.1
1.6
1.1
0.6
1.7
3.3
3.3
1.7
1.5
1
CLK high or low
Data before CLK↑
tsu
Setup time
Hold time
CLK high
CLK low
ns
ns
Data before LE↓
Data after CLK↑
Data after LE↓
0.7
1.4
th
CLK high or low
(1) This information was not available at the time of publication.
4
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
VCC = 1.8 V
VCC = 2.7 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN TYP MIN MAX MIN
MAX MIN MAX
(1)
fmax
150
1
150
150
MHz
(1)
(1)
(1)
(1)
(1)
A
5
5.9
6.3
6.3
4.9
5
5.8
6.1
6.5
4.9
1
1.3
1.4
1.1
1.3
4.2
5.1
5.4
5.5
4.5
tpd
LE
Y
1.3
1.4
1.4
1
ns
CLK
OE
OE
ten
Y
Y
ns
ns
tdis
(1) This information was not available at the time of publication.
SWITCHING CHARACTERISTICS
from 0°C to 85°C, CL = 0 pF
VCC = 3.3 V
± 0.15 V
FROM
TO
(OUTPUT)
PARAMETER
(INPUT)
UNIT
MIN
0.9
MAX
A
2
(1)
tpd
Y
ns
CLK
1.4
2.9
(1) Texas Instruments SPICE simulation data
SWITCHING CHARACTERISTICS
from 0°C to 65°C, CL = 50 pF
VCC = 3.3 V
± 0.15 V
FROM
TO
(OUTPUT)
PARAMETER
(INPUT)
UNIT
MIN
1
MAX
A
4
5
tpd
Y
ns
CLK
1.9
OPERATING CHARACTERISTICS
TA = 25°C
VCC = 1.8 V
VCC = 2.5 V VCC = 3.3 V
PARAMETER
TEST CONDITIONS
UNIT
TYP
TYP
35.5
12.5
TYP
40
(1)
Outputs enabled
Outputs disabled
Power dissipation
capacitance
Cpd
CL = 0,
f = 10 MHz
pF
(1)
14
(1) This information was not available at the time of publication.
5
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
PARAMETER MEASUREMENT INFORMATION
V
LOAD
S1
Open
R
L
From Output
Under Test
TEST
S1
GND
t
Open
V
LOAD
GND
pd
/t
/t
C
t
t
L
PLZ PZL
R
L
(see Note A)
PHZ PZH
LOAD CIRCUIT
INPUT
V
CC
V
M
V
LOAD
C
L
R
L
V
∆
V
I
t /t
r f
1.8 V
V
V
2.7 V
2.7 V
V
/2
/2
2 × V
2 × V
6 V
6 V
1 kΩ
500 Ω
500 Ω
500 Ω
0.15 V
0.15 V
0.3 V
≤2 ns
≤2 ns
≤2.5 ns
≤2.5 ns
30 pF
30 pF
50 pF
50 pF
CC
CC
CC
2.5 V ± 0.2 V
2.7 V
V
CC
CC
CC
1.5 V
1.5 V
3.3 V ± 0.3 V
0.3 V
t
w
V
I
V
I
V
M
V
M
Input
Timing
Input
V
M
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
t
su
t
h
V
I
Output
Control
(low-level
enabling)
Data
Input
V
I
V
V
M
M
V
M
V
M
0 V
0 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
t
t
PLZ
PZL
Output
Waveform 1
S1 at V
LOAD
(see Note B)
V
V
/2
LOAD
V
I
V
M
Input
V
M
V
M
V + V
∆
OL
0 V
OL
t
t
PZH
PHZ
t
t
PHL
PLH
Output
Waveform 2
S1 at GND
V
OH
V
V
OH
V
OH
− V
∆
V
M
Output
V
M
V
M
0 V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
6
SN74ALVC162835
18-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES126H–FEBRUARY 1998–REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
0
ALVC162835 Pullup
x
−0.01
)NjPC100 Requirements
−0.02
−0.03
−0.04
−0.05
−0.06
−0.07
−0.08
−0.09
−0.1
0
0.5
1.0
1.5
2.0
2.5
3.0
V
OH
− Output Voltage − V
Figure 2. IV Characteristics - Pullup
0.12
0.10
0.08
0.06
0.04
0.02
ALVC162835 Pulldown
x
)NjPC100 Requirements
0.00
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
V
OL
− Output Voltage − V
Figure 3. IV Characteristics - Pulldown
7
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jul-2006
PACKAGING INFORMATION
Orderable Device
74ALVC162835DGGRE4
74ALVC162835DGVRE4
74ALVC162835DLG4
74ALVC162835DLRG4
SN74ALVC162835DGGR
SN74ALVC162835DGVR
SN74ALVC162835DL
SN74ALVC162835DLR
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
TSSOP
DGG
56
56
56
56
56
56
56
56
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TVSOP
SSOP
SSOP
TSSOP
TVSOP
SSOP
SSOP
DGV
DL
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DL
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DGG
DGV
DL
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DL
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO001C – JANUARY 1995 – REVISED DECEMBER 2001
DL (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
48 PINS SHOWN
0.025 (0,635)
48
0.0135 (0,343)
0.008 (0,203)
0.005 (0,13)
M
25
0.010 (0,25)
0.005 (0,13)
0.299 (7,59)
0.291 (7,39)
0.420 (10,67)
0.395 (10,03)
Gage Plane
0.010 (0,25)
0°–ā8°
1
24
0.040 (1,02)
0.020 (0,51)
A
Seating Plane
0.004 (0,10)
0.008 (0,20) MIN
PINS **
0.110 (2,79) MAX
28
48
0.630
56
DIM
0.380
(9,65)
0.730
A MAX
A MIN
(16,00) (18,54)
0.370
(9,40)
0.620
0.720
(15,75) (18,29)
4040048/E 12/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15).
D. Falls within JEDEC MO-118
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS003D – JANUARY 1995 – REVISED JANUARY 1998
DGG (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
48 PINS SHOWN
0,27
0,17
M
0,08
0,50
48
25
6,20
6,00
8,30
7,90
0,15 NOM
Gage Plane
0,25
1
24
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
48
56
64
DIM
A MAX
12,60
12,40
14,10
13,90
17,10
16,90
A MIN
4040078/F 12/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Low Power Wireless www.ti.com/lpw
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
相关型号:
74ALVC162835T
Low Voltage 18-Bit Universal Bus Driver with 3.6V Tolerant Inputs/Outputs and 26з Series Resistors in Outputs
FAIRCHILD
74ALVC162836A
20-bit registered driver with inverted register enable and 30ohm termination resistors 3-State
NXP
74ALVC162836ADGG
20-bit registered driver with inverted register enable and 30ohm termination resistors 3-State
NXP
74ALVC162836ADGG-T
IC ALVC/VCX/A SERIES, 20-BIT DRIVER, TRUE OUTPUT, PDSO56, PLASTIC, SOT-364, TSSOP2-56, Bus Driver/Transceiver
NXP
74ALVC162836A_0006
20-bit registered driver with inverted register enable and 30ohm termination resistors 3-State
NXP
©2020 ICPDF网 联系我们和版权申明