74AUC1GU04DCKRG4 [TI]
SINGLE INVERTER GATE; 单非门
| 型号： | 74AUC1GU04DCKRG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | SINGLE INVERTER GATE |
| 文件： | 总12页 (文件大小：445K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN74AUC1GU04
SINGLE INVERTER GATE
www.ti.com
SCES371L–SEPTEMBER 2001–REVISED APRIL 2007
FEATURES
•
Available in the Texas Instruments
NanoFree™ Package
•
•
•
±8-mA Output Drive at 1.8 V
Unbuffered Output
•
Optimized for 1.8-V Operation and Is 3.6-V I/O
Tolerant to Support Mixed-Mode Signal
Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
•
ESD Protection Exceeds JESD 22
•
•
•
Sub-1-V Operable
–
–
–
2000-V Human-Body Model (A114-A)
200-V Machine Model (A115-A)
Max tpd of 2.4 ns at 1.8 V
Low Power Consumption, 10-µA Max ICC
1000-V Charged-Device Model (C101)
DBV PACKAGE
(TOP VIEW)
DCK PACKAGE
(TOP VIEW)
DRY PACKAGE
(TOP VIEW)
YZP PACKAGE
(BOTTOM VIEW)
3
4
5
Y
GND
A
NC
A
V
Y
1
2
3
5
1
2
3
6
5
4
CC
NC
A
VCC
NC
Y
1
2
3
5
NC
A
V
CC
2
1
DNU
V
CC
GND
4
GND
4
Y
GND
DNU - Do not use
NC – No internal connection
See mechanical drawings for dimensions.
DESCRIPTION/ORDERING INFORMATION
This single inverter gate is operational at 0.8-V to 2.7-V VCC, but is designed specifically for 1.65-V to 1.95-V VCC
operation.
The SN74AUC1GU04 contains one inverter with an unbuffered output and performs the Boolean function Y = A.
NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the
package.
ORDERING INFORMATION
ORDERABLE PART
TA
PACKAGE(1)(2)
NanoFree™ – WCSP
TOP-SIDE MARKING(3)
NUMBER
(DSBGA)
0.23-mm Large Bump – YZP
(Pb-free)
Reel of 3000
SN74AUC1GU04YZPR
_ _ _UD_
–40°C to 85°C
SON – DRY
Reel of 5000
Reel of 300
Reel of 300
SN74AUC1GU04DRYR
SN74AUC1GU04DBVR
SN74AUC1GU04DCKR
PREVIEW
UU4_
SOT (SOT-23) – DBV
SOT (SC-70) – DCK
UD_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
(3) DBV/DCK/DRY: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree is a trademark of Texas Instruments.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2001–2007, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74AUC1GU04
SINGLE INVERTER GATE
www.ti.com
SCES371L–SEPTEMBER 2001–REVISED APRIL 2007
FUNCTION TABLE
INPUT
A
OUTPUT
Y
H
L
L
H
LOGIC DIAGRAM (POSITIVE LOGIC)
2
4
A
Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
MAX
UNIT
V
VCC
VI
Supply voltage range
Input voltage range(2)
3.6
3.6
V
VO
IIK
Output voltage range(2)
–0.5 VCC + 0.5
V
Input clamp current
VI < 0
–50
–50
±20
±100
206
252
234
132
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
Continuous output current
Continuous current through VCC or GND
DBV package
DCK package
DRY package
YZP package
θJA
Package thermal impedance(3)
°C/W
°C
Tstg
Storage temperature range
–65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback
SN74AUC1GU04
SINGLE INVERTER GATE
www.ti.com
SCES371L–SEPTEMBER 2001–REVISED APRIL 2007
Recommended Operating Conditions(1)
MIN
0.8
MAX UNIT
VCC
VIH
VIL
VI
Supply voltage
2.7
V
V
V
V
V
High-level input voltage
Low-level input voltage
Input voltage
IO = –100 µA
IO = 100 µA
0.65 × VCC
0.35 × VCC
0
0
3.6
VCC
–0.7
–3
–5
–8
–9
0.7
3
VO
Output voltage
VCC = 0.8 V
VCC = 1.1 V
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 0.8 V
VCC = 1.1 V
VCC = 1.4 V
VCC = 1.65 V
VCC = 2.3 V
IOH
High-level output current
Low-level output current
mA
mA
IOL
5
8
9
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
20
85
ns/V
TA
–40
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
0.8 V to 2.7 V
0.8 V
MIN TYP(1) MAX UNIT
VCC – 0.1
IOH = –100 µA
IOH = –0.7 mA
IOH = –3 mA
IOH = –5 mA
IOH = –8 mA
IOH = –9 mA
IOL = 100 µA
IOL = 0.7 mA
IOL = 3 mA
0.55
1.1 V
0.8
1
VOH
V
1.4 V
1.65 V
1.2
1.8
2.3 V
0.8 V to 2.7 V
0.8 V
0.2
0.25
1.1 V
0.3
0.4
0.45
0.6
±5
VOL
V
IOL = 5 mA
1.4 V
IOL = 8 mA
1.65 V
IOL = 9 mA
2.3 V
II
A input
VI = VCC or GND
VI = VCC or GND,
VI = VCC or GND
0 to 2.7 V
0.8 V to 2.7 V
2.5 V
µA
µA
pF
ICC
Ci
IO = 0
10
3
(1) All typical values are at TA = 25°C.
3
Submit Documentation Feedback
SN74AUC1GU04
SINGLE INVERTER GATE
www.ti.com
SCES371L–SEPTEMBER 2001–REVISED APRIL 2007
Switching Characteristics
over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1)
VCC = 1.2 V VCC = 1.5 V
± 0.1 V ± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 0.8 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
TYP
MIN MAX MIN MAX MIN TYP MAX MIN MAX
0.6 2.5 0.6 1.7 0.3 1.1 2.3 0.2
tpd
A
Y
1.9
2
ns
Switching Characteristics
over recommended operating free-air temperature range, CL = 30 pF (unless otherwise noted) (see Figure 1)
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
0.6
TYP
MAX
MIN
MAX
tpd
A
Y
1.1
2.4
0.5
2.1
ns
Operating Characteristics
TA = 25°C
VCC = 0.8 V VCC = 1.2 V VCC = 1.5 V VCC = 1.8 V VCC = 2.5 V
TEST
CONDITIONS
PARAMETER
UNIT
TYP
TYP
TYP
TYP
TYP
Power dissipation
capacitance
Cpd
f = 10 MHz
4
4
4
4
5
pF
4
Submit Documentation Feedback
SN74AUC1GU04
SINGLE INVERTER GATE
www.ti.com
SCES371L–SEPTEMBER 2001–REVISED APRIL 2007
PARAMETER MEASUREMENT INFORMATION
2 × V
CC
TEST
/t
PLH PHL
S1
Open
2 × V
S1
Open
GND
R
L
t
t
From Output
Under Test
t
/t
PLZ PZL
CC
/t
GND
PHZ PZH
C
L
R
L
(see Note A)
C
L
V
∆
R
L
V
CC
0.8 V
2 kΩ
2 kΩ
2 kΩ
2 kΩ
2 kΩ
1 kΩ
500 Ω
0.1 V
0.1 V
0.1 V
15 pF
15 pF
15 pF
15 pF
15 pF
30 pF
30 pF
1.2 V ± 0.1 V
1.5 V ± 0.1 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
LOAD CIRCUIT
0.15 V
0.15 V
0.15 V
0.15 V
V
CC
Timing Input
V /2
CC
0 V
t
w
t
su
t
h
V
CC
V
CC
V /2
CC
V /2
CC
Input
V /2
CC
V /2
CC
Data Input
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
CC
CC
Output
Control
V
CC
/2
V
CC
/2
V /2
CC
V /2
CC
Input
0 V
V
0 V
t
t
t
PLZ
t
t
PHL
PZL
PLH
Output
Waveform 1
V
OH
CC
V
/2
/2
V
V
/2
/2
V
CC
/2
CC
CC
Output
S1 at 2 × V
V
OL
+ V
PHZ
CC
∆
V
OL
V
OL
(see Note B)
t
t
PZH
t
PHL
PLH
/2
Output
Waveform 2
S1 at GND
V
OH
V
OH
V
OH
– V
∆
V
CC
V
CC
CC
Output
≈0 V
V
OL
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω, slew rate ≥ 1 V/ns.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
PHL pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
5
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
22-Jul-2008
PACKAGING INFORMATION
Orderable Device
74AUC1GU04DBVRE4
74AUC1GU04DBVRG4
74AUC1GU04DCKRG4
SN74AUC1GU04DBVR
SN74AUC1GU04DCKR
SN74AUC1GU04DCKRE4
SN74AUC1GU04YZPR
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOT-23
DBV
5
5
5
5
5
5
5
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOT-23
SC70
DBV
DCK
DBV
DCK
DCK
YZP
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOT-23
SC70
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DSBGA
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74AUC1GU04DBVR SOT-23
SN74AUC1GU04DCKR SC70
SN74AUC1GU04YZPR DSBGA
DBV
DCK
YZP
5
5
5
3000
3000
3000
180.0
180.0
178.0
9.2
9.2
9.2
3.23
2.24
1.02
3.17
2.34
1.52
1.37
1.22
0.63
4.0
4.0
4.0
8.0
8.0
8.0
Q3
Q3
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
20-Jul-2010
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74AUC1GU04DBVR
SN74AUC1GU04DCKR
SN74AUC1GU04YZPR
SOT-23
SC70
DBV
DCK
YZP
5
5
5
3000
3000
3000
202.0
202.0
220.0
201.0
201.0
220.0
28.0
28.0
35.0
DSBGA
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
Automotive
www.ti.com/automotive
www.ti.com/communications
Communications and
Telecom
DSP
dsp.ti.com
Computers and
Peripherals
www.ti.com/computers
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Consumer Electronics
Energy
www.ti.com/consumer-apps
www.ti.com/energy
Logic
Industrial
www.ti.com/industrial
Power Mgmt
Microcontrollers
RFID
power.ti.com
Medical
www.ti.com/medical
microcontroller.ti.com
www.ti-rfid.com
Security
www.ti.com/security
Space, Avionics &
Defense
www.ti.com/space-avionics-defense
RF/IF and ZigBee® Solutions www.ti.com/lprf
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2010, Texas Instruments Incorporated
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明