ADS1287DIRHBR [TI]
用于地震监测和能源勘探且具有 PGA 的低功耗 1kSPS 2 通道(同步)Δ-Σ ADC | RHB | 32 | -40 to 85;型号: | ADS1287DIRHBR |
厂家: | TEXAS INSTRUMENTS |
描述: | 用于地震监测和能源勘探且具有 PGA 的低功耗 1kSPS 2 通道(同步)Δ-Σ ADC | RHB | 32 | -40 to 85 转换器 |
文件: | 总5页 (文件大小:316K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
ADS1287D
ZHCSGU3 –SEPTEMBER 2017
配备可编程增益放大器的 ADS1287D 双路、同步采样、
低功耗、1000SPS 模数转换器
1 特性
3 说明
1
•
SNR:114dB(50Hz–200Hz,增益 = 1)
功耗:2.2mW(每个 ADC)
ADS1287D 器件是一款双路、同步采样模数转换器
(ADC),配备集成式可编程增益放大器 (PGA) 和有限
脉冲响应 (FIR) 数字滤波器。该 ADC 可满足低功耗地
震数据采集的严苛要求。
•
•
•
•
THD:–115dB
CMRR:110dB
高阻抗 CMOS PGA:
该 ADC 配备 可编程增益的高阻抗放大器,适用于通
过范围较广的输入信号(±2.5V 至 ±0.156V)将地震检
波器和水听器传感器直接连接到 ADC。双路 100nA 电
流源集成到 ADC 输入端,用于传感器的现场测试。
–
增益:1、2、4、8 和 16
•
•
数据传输速率:62.5SPS 至 1000SPS
灵活的数字滤波器:
–
正弦 + 有限脉冲响应 (FIR) + 无限脉冲响应
(IIR)(可选)
该 ADC 包含内在稳定的四阶 Delta-Sigma (ΔΣ) 调制
器。调制器数字输出由内部的 FIR 数字滤波器过滤和
抽取,以生成 ADC 转换结果。
–
–
线性和最小相位响应
可编程高通滤波器
•
•
•
•
•
•
传感器测试电流源
偏移和增益校准
FIR 数字滤波器的数据速率高达每秒 1000 个样本
(SPS)。高通滤波器 (HPF) 可从转换结果中移除直流和
低频率分量。片上增益和偏移调节寄存器支持系统校
准。
同步控制
SPI™- 兼容接口
模拟电源:5V 或 ±2.5V
数字电源:2.5V 至 3.3V
器件的总功耗为 4.4mW。该 ADC 采用紧凑的 5mm ×
5mm VQFN 封装,额定工作温度范围为 –40°C 至
+85°C。
2 应用
器件信息(1)
•
•
•
能量勘探
无源地震监测
便携式仪表
器件型号
ADS1287D
封装
VQFN (32)
封装尺寸(标称值)
5.00mm × 5.00mm
(1) 如需了解所有可用封装,请参阅数据表末尾的封装选项附录。
功能框图
REFN
REFP
AVDD
DVDD
CLK
CS1
DIN
DOUT
SCLK
AINP1
AINN1
ûꢀ
ADC1
Digital
Filter 1
Serial
Interface 1
PGA1
VCOM
CS2
AINP2
AINN2
ûꢀ
ADC2
Digital
Filter 2
Serial
Interface 2
PGA2
VCOM
PWDN
DRDY
SYNC
ADS1287D
Control
RESET
AVSS
DGND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
English Data Sheet: SBAS435
ADS1287D
ZHCSGU3 –SEPTEMBER 2017
www.ti.com.cn
4 器件和文档支持
4.1 商标
SPI is a trademark of Motorola Mobility LLC.
All other trademarks are the property of their respective owners.
4.2 静电放电警告
ESD 可能会损坏该集成电路。德州仪器 (TI) 建议通过适当的预防措施处理所有集成电路。如果不遵守正确的处理措施和安装程序 , 可
能会损坏集成电路。
ESD 的损坏小至导致微小的性能降级 , 大至整个器件故障。 精密的集成电路可能更容易受到损坏 , 这是因为非常细微的参数更改都可
能会导致器件与其发布的规格不相符。
4.3 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
5 机械、封装和可订购信息
以下页面包含机械、封装和可订购信息。这些信息是指定器件的最新可用数据。这些数据如有变更,恕不另行通知
和修订此文档。如欲获取此数据表的浏览器版本,请参阅左侧的导航。
2
版权 © 2017, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
ADS1287DIRHBR
ADS1287DIRHBT
ACTIVE
VQFN
VQFN
RHB
32
32
3000 RoHS & Green
250 RoHS & Green
NIPDAU
Level-3-260C-168 HR
Level-3-260C-168 HR
-40 to 85
-40 to 85
ADS
1287D
ACTIVE
RHB
NIPDAU
(ADS, XADS)
1287D
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
10-Dec-2020
Addendum-Page 2
重要声明和免责声明
TI 均以“原样”提供技术性及可靠性数据(包括数据表)、设计资源(包括参考设计)、应用或其他设计建议、网络工具、安全信息和其他资
源,不保证其中不含任何瑕疵,且不做任何明示或暗示的担保,包括但不限于对适销性、适合某特定用途或不侵犯任何第三方知识产权的暗示
担保。
所述资源可供专业开发人员应用TI 产品进行设计使用。您将对以下行为独自承担全部责任:(1) 针对您的应用选择合适的TI 产品;(2) 设计、
验证并测试您的应用;(3) 确保您的应用满足相应标准以及任何其他安全、安保或其他要求。所述资源如有变更,恕不另行通知。TI 对您使用
所述资源的授权仅限于开发资源所涉及TI 产品的相关应用。除此之外不得复制或展示所述资源,也不提供其它TI或任何第三方的知识产权授权
许可。如因使用所述资源而产生任何索赔、赔偿、成本、损失及债务等,TI对此概不负责,并且您须赔偿由此对TI 及其代表造成的损害。
TI 所提供产品均受TI 的销售条款 (http://www.ti.com.cn/zh-cn/legal/termsofsale.html) 以及ti.com.cn上或随附TI产品提供的其他可适用条款的约
束。TI提供所述资源并不扩展或以其他方式更改TI 针对TI 产品所发布的可适用的担保范围或担保免责声明。IMPORTANT NOTICE
邮寄地址:上海市浦东新区世纪大道 1568 号中建大厦 32 楼,邮政编码:200122
Copyright © 2020 德州仪器半导体技术(上海)有限公司
相关型号:
©2020 ICPDF网 联系我们和版权申明