BQ24081DRCTG4 [TI]
具有计时器使能端和温度感应功能单节 1A 锂离子电池充电器 | DRC | 10 | -40 to 85;
| 型号： | BQ24081DRCTG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 具有计时器使能端和温度感应功能单节 1A 锂离子电池充电器 | DRC | 10 | -40 to 85 电池 光电二极管 电源管理电路 电源电路 |
| 文件： | 总10页 (文件大小：163K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
User's Guide
SLUU261–September 2006
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
This user’s guide describes the bq24081 evaluation module. The EVM provides a
convenient method for evaluating the performance of a charge management solution
for portable applications
Contents
1
2
3
4
5
Introduction .......................................................................................... 1
Test Summary ...................................................................................... 2
Schematic ........................................................................................... 5
Physical Layouts.................................................................................... 6
List of Materials ..................................................................................... 8
List of Figures
1
2
3
4
5
6
bq24081EVM Testing Setup ...................................................................... 3
bq24081 EVM Schematic.......................................................................... 5
bq24081 EVM – Top Layer........................................................................ 6
bq24081 EVM – Bottom Layer.................................................................... 6
bq24081 EVM – Component Placement ........................................................ 7
bq24081 Silkscreen Layer......................................................................... 7
List of Tables
1
2
3
I/O and Jumper Connections...................................................................... 2
Ordering Information ............................................................................... 4
bq24081 EVM Parts List........................................................................... 8
1
Introduction
1.1 Description
A complete designed and tested charger is presented. The charger is designed to deliver up to 1 A of
continuous charge current for single–cell Li-Ion or Li-Pol applications using a dc power supply. The
charger is programmed from the factory to deliver 0.7 A of charging current.
SLUU261–September 2006
Submit Documentation Feedback
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
1
www.ti.com
Test Summary
1.2 Background
The bq24081 is a highly integrated and flexible Li-Ion linear charge device targeted at space-limited
charger applications. It offers an integrated power FET and current sensor, high-accuracy current and
voltage regulation, charge status, and charge termination, in a single monolithic device. An external
resistor sets the magnitude of the charge current.
The bq24081 charges the battery in three phases: conditioning, constant current, and constant voltage.
Charge is terminated based on minimum current. An internal charge timer provides a backup safety for
charge termination. The bq24081 automatically restarts the charge if the battery voltage falls below an
internal threshold. The bq24081 automatically enters sleep mode when the input supply is removed.
1.3 Performance Specification Summary
SPECIFICATION
TEST CONDITIONS
MIN
TYP
5
MAX
5.5
1
UNIT
V
VI(DC)
Supply voltage range
Battery charge current(1)
Power dissipation
V(REG) + 0.5
IO(CHG)
0.7
A
I(CHG) x (V(DC+) - V(BAT+)
)
1.5
W
(1)
This input voltage maximum is a function of the maximum allowable power dissipation on the device. The current level is
programmed for 0.7 A. If the programmed charge is changed, then the maximum input voltage needs to be adjusted.
PMAX(IC) = 1.5 W = I(CHG) (V(DC+) – V(BAT+)). The device has a maximum recommended operation of 6.5 Vdc.
2
Test Summary
This section shows the test setups used, and the tests performed, in evaluating the EVM. See the
bq24081 datasheet (SLUS687) for complete details on operation and specifications for the charger device.
2.1 Test Setup
The bq24081 EVM board requires a regulated 5-Vdc, 1-A power source, to provide input power and a
single-cell Li-Ion or Li-Pol battery pack.
The test setup connections and jumper setting selections are configured for a stand-alone evaluation but
can be changed to interface with external hardware such as a microcontroller.
Table 1. I/O and Jumper Connections(1)
Jack
CONNECTION
Power supply positive connection, preset to 5.0-VDC, 1.2-A current limit.
Power supply return connection, ground
J1–DC+
J1–DC-
J2–BAT+
J2–BAT-
Positive battery pack terminal
Negative battery pack terminal, BAT–, is common with DC–
No connection – R4 is set to 10 kΩ to bias the TS signal in a charging state (bq24081). See datasheet
(SLUS687) to activate TS for bq24081. Connector provides for optional external control.
J2–TS
J2–BAT-
JMP1–STAT1
JMP2–STAT2
JMP3–TE
Return for thermistor (when used)
Monitor JMP1-2 for STAT1, or apply a shunt across JMP1 for LED status.
Monitor JMP2-2 for STAT2, or apply a shunt across JMP2 for LED status.
No jumper => Termination Enabled. Place a shunt on JMP3 to disable termination.
(1)
Factory jumper selections are shown in BOLD.
2.2 Test Procedure
Setup the evaluation board as described above, by making the necessary I/O connections and jumper
selections. Prior to test and evaluation, it is important to verify that the maximum power dissipation on the
device is not exceeded: PMAX = 1.5 W.
P
= (V
- V
)
x I
MAX
(DC+)
(BAT+)
(CHG)
(1)
2
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
SLUU261–September 2006
Submit Documentation Feedback
www.ti.com
Test Summary
1. Turn on the power supply, which is preset to 5 Vdc, and 1 A for the current limit setting.
2. The bq24081 enters preconditioning mode if the battery is below the V(LOWV) threshold. In this mode,
the bq24081 precharges the battery with a low current, typically:
I
O(CHG)
10
0.7 A
10
70 m A
=
=
(2)
until the battery voltage reaches the V(LOWV) threshold or until the precharge timer expires. If the timer
expires, then the charge current is terminated and the bq24081 enters fault mode. Both LEDs turn off
when in fault mode. Toggling input power or battery replacement resets fault mode. Note that there are
several fault conditions. They are described in the data sheet (SLUS687).
3. Once the battery voltage is above the V(LOWV) threshold, the battery enters fast charge mode. This
EVM is programmed for 0.7 A of fast charging current.
4. Once the battery reaches voltage regulation (4.2 V) the current tapers down as the battery reaches its
full capacity.
5. When the current reaches the termination threshold, the charge is terminated.
6. After termination, if the battery discharges down to the recharge threshold, the charger starts fast
charging.
An alternative method of testing the EVM is with a source meter, that can sink or source current. This can
be adjusted to test each mode, in place of a battery.
Another alternative to briefly view each mode, on a scope, is to connect a 1-mF or larger capacitor and a
parallel 10-kΩ resistor on the output in place of a battery to observe the charging cycling.
2.3 Alternative Test Procedure
The procedure in Section 2.3.1 describes a quick test to verify charging states without the need for a
battery or expensive test equipment.
2.3.1
Equipment
1. Power source: current limited 5-V lab supply with its current limit set to 1 A ±0.1 A.
2. Two fluke 75, equivalent or better.
3. Load test board as shown in Figure 1.
Power Supply
5.1 ±0.1 V
R2
120 W
0.25 W
bq24081EVM
R3
120 W
0.25 W
R4
120 W
0.25 W
R5
10 W
2 W
R6
10 W
2 W
ILIM 1.0 ±0.1 A
DC+
DC−
DMM1
+
−
C1
1000 mF
R1
2 kW
0.25 W
R9
680 W
0.25 W
+
BAT+
BAT−
BAT+
BAT−
R7
2.4 W
2 W
2
1
S3
S1
S2
3
A
R8
0.1 W
A
Settings for Switch S2
1. ON (Fast Charger for USB 0.5 A)
2. OFF
3. ON (Fast Charger for Adaptive Source)
DMM2
Note: R5, R6, and R7—5% or better. All other resistors—1% or better
Figure 1. bq24081EVM Testing Setup
SLUU261–September 2006
Submit Documentation Feedback
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
3
www.ti.com
Test Summary
2.3.2
Equipment Setup
1. Connect the load board to the BAT+ and BAT–. Set switches SW1 and SW3 to closed and switch SW2
to off (center).
2. Connect a voltage meter, DMM1, to the BAT+/BAT– output to monitor the output voltage (range is 0 V
to 5 V).
3. Set the lab supply for 5.1 V ±0.1 Vdc, 1 A ±0.1 A current limit and then turn off supply. Connect DMM2
across R8 to monitor the current (R8 should be a 1% or better resistor if it is used for current
measurements).
4. Shunt jumpers should be installed on JPM1 and JPM2.
2.3.3
Procedure
1. Make sure the steps described in Section 2.3.2Equipment Setup are followed (SW1 and SW3 are set
to closed, and SW2 is set to off, shunts installed as shown in step 4, test board connected, and power
source set to 5.1 V ±0.1 Vdc). Turn on the power source.
2. Verify output voltage, BAT+, is between 2.5 Vdc and 2.9 Vdc and the red LED (D1) and green LEDs
(D2) are illuminated.
3. Momentarily short J5–2 to J1–1 (TS to DC+), and verify that charging stops (DMM2 < 0.5 mV).
Remove short and verify output voltage, BAT+, is between 2.5 Vdc and 2.9 Vdc.
4. Open switch SW1. Verify LED (D2) is off and the output voltage, BAT+, regulates between 4.16 Vdc
and 4.24 Vdc.
5. Close switch SW2 (to position 1) and verify output voltage, BAT+, is between 3.4 Vdc and 3.8 Vdc.
6. Verify that the charging current is between 0.6 A and 0.8 A (DMM2 is between 60 mVdc and
80 mVdc).
7. Open switch SW3, set switch SW2 to off and verify that the LEDs, (D1, D2), alternate being
illuminated.
8. Turn off power. Remove UUT from test apparatus. Repeat setup and test procedures for other
untested EVMs.
2.4 Ordering Information
Table 2. Ordering Information
EVM Part Number
Additional Devices
None
Chemistry
Pack Voltage
Capacity
bq24081EVM
Li-Ion/Li-Poly
2.5 V to 4.2 V
Any
4
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
SLUU261–September 2006
Submit Documentation Feedback
www.ti.com
Schematic
3
Schematic
Figure 2 shows the schematic diagram for the bq24081EVM.
Figure 2. bq24081 EVM Schematic
SLUU261–September 2006
Submit Documentation Feedback
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
5
www.ti.com
Physical Layouts
4
Physical Layouts
Figure 3 shows the top layer of the EVM. Figure 4 shows the bottom layer. Figure 5 shows the top
assemble view.
Figure 3. bq24081 EVM – Top Layer
Figure 4. bq24081 EVM – Bottom Layer
6
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
SLUU261–September 2006
Submit Documentation Feedback
www.ti.com
Physical Layouts
Figure 5. bq24081 EVM – Component Placement
TS
Figure 6. bq24081 Silkscreen Layer
SLUU261–September 2006
Submit Documentation Feedback
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
7
www.ti.com
List of Materials
5
List of Materials
Table 3 lists the materials required for the bq24081EVM.
Table 3. bq24081 EVM Parts List(1)
Count
Ref. Designator
C1, C2
Value
1uF
Description
Size
Part Number
(std)
Manufacturer
(std)
2
1
1
1
1
3
3
1
0
2
1
1
Capacitor, Ceramic, 1uF, 16-V, X7R
Diode, LED, Red, 1.8-V, 20-mA, 20-mcd
Diode, LED, Green, 2.1-V, 20-mA, 6-mcd
Terminal Block, 2-pin, 6-A, 3.5mm
0805
0603
0603
D1
Red
160-1181-1-ND
160-1183-1-ND
ED1514
Liteon
Liteon
OST
D2
Green
J1
0.27 x 0.25
0.55 x 0.25
0.100 inch x 2
0603
J2
Terminal Block, 4-pin, 6-A, 3.5mm
ED1516
OST
JPM1, JPM2, JPM3
PTC36SAAN
1.5k
Header, 2-pin, 100mil spacing, (36-pin strip)
Resistor, Chip, 1.5k-Ohms, 1/16-W, 1%
Resistor, Chip, 1.13k-Ohms, 1/16-W, 1%
PTC36SAAN
Std
Sullins
Std
R1, R2, R6
R3
1.13k
0603
Std
Std
R5
0603
R4, R7
U1
10k
Resistor, Chip, 10k-Ohms, 1/16-W, 1%
IC, Single Chip, Li Ion/Li POL, Charger
PCB, 2 In x 1 In x 0.031 In
0603
Std
Std
TI
bq24081DRC
DRC10
bq24081DRC
HPA182
--
Any
(1)
Notes:
1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with
equivalent MFG's components.
8
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
SLUU261–September 2006
Submit Documentation Feedback
EVALUATION BOARD/KIT IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION
PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the
product(s) must have electronics training and observe good engineering practice standards. As such, the goods being provided are
not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations,
including product safety and environmental measures typically found in end products that incorporate such semiconductor
components or circuit boards. This evaluation board/kit does not fall within the scope of the European Union directives regarding
electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the
technical requirements of these directives or other related directives.
Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30
days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY
SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all
claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to
take any and all appropriate precautions with regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.
TI assumes no liability for applications assistance, customer product design, software performance, or infringement of
patents or services described herein.
Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling the
product. This notice contains important safety information about temperatures and voltages. For additional information on TI’s
environmental and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh.
No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or
combination in which such TI products or services might be or are used.
FCC Warning
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION
PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. It generates, uses, and
can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15
of FCC rules, which are designed to provide reasonable protection against radio frequency interference. Operation of this
equipment in other environments may cause interference with radio communications, in which case the user at his own expense
will be required to take whatever measures may be required to correct this interference.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2006, Texas Instruments Incorporated
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the input voltage range of V(REG) + 0.5 V to 5.2 V and the output voltage range of 0 V to
4.2 V.
Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are
questions concerning the input range, please contact a TI field representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the
EVM. Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load
specification, please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than 70°C. The EVM is designed to
operate properly with certain components above 70°C as long as the input and output ranges are maintained. These components
include but are not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of
devices can be identified using the EVM schematic located in the EVM User's Guide. When placing measurement probes near
these devices during operation, please be aware that these devices may be very warm to the touch.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2006, Texas Instruments Incorporated
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Low Power Wireless www.ti.com/lpw
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明