BQ294504DRVR [TI]
Overvoltage Protection for 2-Series and 3-Series Cell Li-Ion Batteries; 过压保护2系列和3系列芯锂离子电池型号: | BQ294504DRVR |
厂家: | TEXAS INSTRUMENTS |
描述: | Overvoltage Protection for 2-Series and 3-Series Cell Li-Ion Batteries |
文件: | 总18页 (文件大小:735K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
www.ti.com
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
Overvoltage Protection for 2-Series and 3-Series Cell Li-Ion Batteries
Check for
Samples: bq294502, bq294504, bq294512, bq294515, bq294522, bq294524, bq294532, bq294562, bq294572, bq294582, bq294592
1
FEATURES
•
Low Power Consumption ICC ≈ 1 µA
(VCELL(ALL) < VPROTECT
)
•
2-Series and 3-Series Cell Monitor for
Secondary Protection
•
•
Low leakage current per cell input < 100 nA
Small package footprint
•
•
Fixed Programmable Delay Timer
Fixed OVP Threshold:
–
6-pin SON
–
–
–
–
–
–
–
–
–
–
–
–
bq294502 = 4.35 V with 4-s Delay Timer
bq294504 = 4.35 V with 6.5-s Delay Timer
bq294512 = 4.40 V with 4-s Delay Timer
bq294515 = 4.425 V with 4-s Delay Timer
bq294522 = 4.45 V with 4-s Delay Timer
bq294524 = 4.45 V with 6.5-s Delay Timer
bq294532 = 4.50 V with 4-s Delay Timer
bq294562 = 4.25 V with 4-s Delay Timer
bq294572 = 4.00 V with 4-s Delay Timer
bq294582 = 4.225 V with 4-s Delay Timer
bq294584 = 4.225 V with 6.5-s Delay Timer
bq294592 = 4.30 V with 4-s Delay Timer
APPLICATIONS
•
2nd-Level Protection in Li-Ion Battery Packs in:
–
–
–
–
–
Tablets
Slates
Power Tools
Notebook Computers
Portable Equipment and Instrumentation
•
High-Accuracy Overvoltage Protection:
± 10 mV
DESCRIPTION
The bq2945xy family of products is a secondary level voltage monitor and protector for Li-Ion battery pack
systems. Each cell is monitored independently for an overvoltage condition. Based on the configuration, an
output is triggered after a fixed delay if any one of the two or three cells has an overvoltage condition. This output
will be triggered into a high state after an overvoltage condition has satisfied the specified delay timer.
DRV Package
(Top View)
6
5
4
V3
V2
1
OUT
VDD
V1
2
3
PWR PAD
VSS
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
TAPE AND REEL
(LARGE)
TAPE AND REEL
(SMALL)
TA
PART NUMBER PACKAGE
OVP (V) DELAY TIME (S)
bq294502
bq294504
bq294512
bq294515
bq294522
4.35
4.35
4.40
4.425
4.45
4.45
4.50
4.25
4.00
4.225
4.225
4.30
4.0
6.5
4.0
4.0
4.0
6.5
4.0
4.0
4.0
4.0
6.5
4.0
bq294502DRVR
bq294504DRVR
bq294512DRVR
bq294515DRVR
bq294522DRVR
bq294524DRVR
bq294532DRVR
bq294562DRVR
bq294572DRVR
bq294582DRVR
bq294584DRVR
bq294592DRVR
bq294502DRVT
bq294504DRVT
bq294512DRVT
bq294515DRVT
bq294522DRVT
bq294524DRVT
bq294532DRVT
bq294562DRVT
bq294572DRVT
bq294582DRVT
bq294584DRVT
bq294592DRVT
bq294524
SON-6
–40°C to
110°C
DRV
bq294532
bq294562
bq294572
bq294582
bq294584(2)
bq294592
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder on ti.com (www.ti.com).
(2) Product Preview only
THERMAL INFORMATION
bq2945xy
THERMAL METRIC(1)
SON
6 PINS
186.4
90.4
UNITS
θJA
Junction-to-ambient thermal resistance
θJC(top)
θJB
Junction-to-case(top) thermal resistance
Junction-to-board thermal resistance
110.7
96.7
°C/W
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case(bottom) thermal resistance
ψJB
90
θJC(bottom)
n/a
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
2
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
www.ti.com
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
PIN FUNCTIONS
bq2945xy
Pin Name
Type I/O
Description
1
2
V3
V2
IA
IA
Sense input for positive voltage of the third cell from the bottom of the stack
Sense input for positive voltage of the second cell from the bottom of the stack
Electrically connected to IC ground and negative terminal of the lowest cell in
the stack
3
VSS
P
4
5
6
V1
IA
P
Sense input for positive voltage of the lowest cell in the stack
Power supply
VDD
OUT
OA
Output drive for external N-Channel FET
VSS pin to be connected to the PWRPAD on the printed circuit board for proper
operation
Thermal Pad
PWRPAD
—
PIN DETAILS
Description
The voltage sensing for each cell is done independently using a multiplexer. The method of overvoltage detection
is comparing the voltage to an overvoltage protection voltage VOV. Once the voltage exceeds the programmed
fixed value, the delay timer circuit is activated. This delay (tDELAY) is fixed for either a 4-s or 6.5-s delay. When
these conditions are satisfied, the OUT terminal is transitioned to a high level. This output (OUT) is released to a
low condition if all of the cell inputs (Vx) are below the OVP threshold minus the Vhys.
VOV
V
OV –VHYS
t
DELAY
OUT (V)
Figure 1. Timing for Overvoltage Sensing
Sense Positive Input for Vx
This is an input to sense each single battery cell voltage. A series resistor and a capacitor across the cell for
each input is required for noise filtering and stable voltage monitoring.
Output Drive, OUT
The gate of an external N-Channel MOSFET is connected to this terminal. This output transitions to a high level
when an overvoltage condition is detected and after the programmed delay timer. The out will reset to a low level
if the cell voltage falls below the VOV threshold before the fixed delay timer expires.
Supply Input, VDD
This terminal is the unregulated input power source for the IC. A series resistor is connected to limit the current,
and a capacitor is connected to ground for noise filtering.
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
www.ti.com
Thermal Pad, PWRPAD
For correct operation, the power pad (PWRPAD) is connected to the VSS terminal on the printed circuit board.
FUNCTIONAL BLOCK DIAGRAM
PACK+
RVD
CVD
VDD
REG
R
IN
V3
V2
INT_EN
VOV
Delay
Timer
C
IN
R
IN
OUT
C
IN
V1
R
IN
OSC
C
IN
VSS
PWRPAD
PACK–
ABSOLUTE MAXIMUM RATINGS
Over operating free-air temperature range (unless otherwise noted)(1)
PARAMETER
Supply voltage range
CONDITION
VALUE/UNIT
–0.3 to 30 V
–0.3 to 30 V
–0.3 to 8 V
VDD–VSS
V1–VSS or V2–VSS or V3–VSS
V3–V2 or V2–V1
Input voltage range
Output voltage range
OUT–VSS
–0.3 to 30 V
Continuous total power dissipation, PTOT
Functional temperature
See package dissipation rating.
–65 to 110°C
Storage temperature range, TSTG
Lead temperature (soldering, 10 s), TSOLDER
–65 to 150°C
300°C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum–rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
Over operating free-air temperature range (unless otherwise noted)
PARAMETER
MIN
3
NOM
MAX
25
UNIT
V
(1)
Supply voltage, VDD
Input voltage range V3–V2 or V2–V1 or V1–VSS
Operating ambient temperature range, TA
0
5
V
–40
110
°C
(1) See APPLICATION SCHEMATIC.
4
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
www.ti.com
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
DC CHARACTERISTICS
Typical values stated where TA = 25°C and VDD = 10.8 V, MIN/MAX values stated where TA = –40°C to 110°C and VDD
3 V to 15 V (unless otherwise noted).
=
Symbol
Parameter
Condition
Min
Typ
Max
Unit
Voltage Protection Threshold VCx
1.0
1.1
1.2
1.3
1.4
bq294502, fixed delay 4 s
4.35
4.35
4.40
4.425
4.45
4.45
4.50
4.25
4.00
4.225
4.225
4.30
V
V
V
V
V
V
V
V
V
V
V
V
bq294504, fixed delay 6.5 s
bq294512, fixed delay 4 s
bq294515, fixed delay 4 s
bq294522, fixed delay 4 s
bq294524, fixed delay 6.5 s
bq294532, fixed delay 4 s
bq294562, fixed delay 4 s
bq294572, fixed delay 4 s
bq294582, fixed delay 4 s
bq294584, fixed delay 6.5 s(1)
bq294592, fixed delay 4 s
V(PROTECT)
Overvoltage
Detection
–
1.5
VOV
1.6
1.7
1.8
1.9
1.10
1.11
Overvoltage
Detection
Hysteresis
1.12
1.13
VHYS
250
–10
300
400
10
mV
OV Detection
Accuracy
VOA
TA = 25°C
mV
TA = -40°C
TA = 0°C
TA = 60°C
TA = 110°C
-40
-20
-24
-54
44
20
24
54
mV
mV
mV
mV
OV Detection
Accuracy due to
Temperature
1.14
VOA –DRIFT
Supply and Leakage Current
(V3–V2) = (V2–V1) = (V1–VSS) = 4.0 V (See
Figure 11 for reference)
1
2
1.15
ICC
Supply Current
µA
µA
(V3–V2) = (V2–V1) = (V1–VSS) = 2.8 V with TA
–40°C to 60°C
=
1.25
Measured at V3, V2, and V1 = 4.0 V
(V2–V1) = (V1–VSS) = 4.0 V
TA = 0°C to 60°C (See Figure 11 for reference.)
Input Current at
Vx Pins
1.16
IIN
–0.1
6
0.1
Output Drive OUT
(V3–V2) or (V2–V1) or (V1–VSS) > VOV
VDD = 7.2 V, IOH = 100 µA, TA = –40°C to 110°C
1.17
V
V
Two of the three cells are short circuit and only one
cell is powered
(V3–V2) or (V2–V1) or (V1–VSS) > VOV
VDD = Vx (Cell voltage), IOH = 100 µA, TA = –40°C to
110°C
VDD –
0.2
1.18
Output Drive
Voltage
VOUT
(V3–V2), (V2–V1), and (V1–VSS) < VOV, IOL = 100
µA, TA = 25°C
TA = –40°C to 110°C
1.19
250
400
4.5
mV
OUT Short
Circuit Current
1.20
1.21
1.22
IOUT(Short)
OUT = 0 V (V3–V2) or (V2–V1) or (V1–VSS) > VOV
mA
µs
Output Rise
Time
(2)
tR
CL = 1 nF, VOH(OUT) = 0 V to 5 V
5
2
Output
Impedance
ZO
5
kΩ
Fixed Delay Timer
1.23 tDELAY
Fixed Delay, bq2945x2
Fixed Delay, bq2945x4
3.2
5.2
4
4.8
7.8
Fault Detection
Delay Time
s
6.5
(1) Product Preview only
(2) Specified by design. Not 100% tested in production.
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
www.ti.com
DC CHARACTERISTICS (continued)
Typical values stated where TA = 25°C and VDD = 10.8 V, MIN/MAX values stated where TA = –40°C to 110°C and VDD
3 V to 15 V (unless otherwise noted).
=
Symbol
Voltage Protection Threshold VCx
Fault Detection
Delay Time in
Test Mode
Parameter
Condition
Min
Typ
Max
Unit
1.24
tDELAY_CTM
Fixed delay (Internal settings)
15
ms
TYPICAL CHARACTERISTICS
1.3
1.2
1.1
1
0.9
0.8
0.7
-40
0
25
60
110
Temperature Deg C
Figure 2. ICC Current Consumption Versus Temperature
4.370
4.360
4.350
4.340
4.330
4.320
4.310
Min
Max
Mean
–40
0
25
60
110
Temperature Deg C
Figure 3. bq294502 Overvoltage Threshold (OVT) vs. Temp
6
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
www.ti.com
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
325
324
323
322
321
320
319
318
317
316
315
-40
0
25
60
110
Temperature Deg C
Figure 4. Hysteresis VHYS Versus Temperature
–3.85
–3.9
–3.95
–4
–4.05
–4.1
–40
0
25
60
110
Temperature Deg C
Figure 5. Output Current IOUT Versus Temperature
8.0
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
3-cell data
2-cell data
0
100
200
300
400
500
(µA)
600
700
800
900 1,000
I
OH
Figure 6. Output Voltage Versus Output Current
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
www.ti.com
APPLICATION INFORMATION
Pack +
R
VD
R
IN
bq2945xy
V3
OUT
VDD
V1
C
IN
VCELL3
VCELL2
VCELL1
R
IN
V2
C
IN
R
IN
CVD
VSS
PWRPAD
C
IN
Pack–
Figure 7. Application Configuration
Changes to the ranges stated in Table 1 will impact the accuracy of the cell measurements. Figure 7 shows each
external component.
Table 1. Parameters
PARAMETER
External Component
MIN
900
0.01
100
NOM
MAX
1100
0.1
UNIT
Ω
Voltage monitor filter resistance
Voltage monitor filter capacitance
Supply voltage filter resistance
Supply voltage filter capacitance
RIN
CIN
1000
µF
Ω
RVD
CVD
1K
0.1
µF
APPLICATION SCHEMATIC
Pack +
Pack +
100
100
bq2945xy
1k
bq2945xy
OUT
V3
V3
OUT
VDD
V1
1k
1k
VCELL3
VCELL2
VCELL1
0.1µF
1k
1k
V2
VDD
V1
V2
VCELL2
VCELL1
0.1µF
0.1µF
VSS
0.1µF
VSS
0.1 µF
PWRPAD
PWRPAD
0.1µF
Pack –
0.1µF
Pack –
Figure 8. 3-Series Cell Configuration with Fixed
Delay
Figure 9. 2-Series Cell Configuration with Internal
Fixed Delay
CUSTOMER TEST MODE
Customer Test Mode (CTM) helps to reduce test time for checking the overvoltage delay timer parameter once
the circuit is implemented in the battery pack. To enter CTM, VDD should be set to at least 10 V higher than V3
(see Figure 10). The delay timer is greater than 10 ms, but considerably shorter than the timer delay in normal
operation. To exit Customer Test Mode, remove the VDD to VC3 voltage differential of 10 V so that the decrease
in this value automatically causes an exit.
CAUTION
Avoid exceeding any Absolute Maximum Voltages on any pins when placing the part
into Customer Test Mode. Also avoid exceeding Absolute Maximum Voltages for the
individual cell voltages (V3–V2), (V2–V1), and (V1–VSS). Stressing the pins beyond
the rated limits may cause permanent damage to the device.
8
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
www.ti.com
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
Figure 10 shows the timing for the Customer Test Mode.
10 V
V
OV
V
–V
HYS
OV
t
10 ms
>
DELAY
OUT (V)
Figure 10. Timing for Customer Test Mode
Figure 11 shows the measurement for current consumption for the product for both VDD and Vx.
bq2945xy
IIN
1
2
3
V3
OUT
VDD
V1
6
5
4
3.6 V
3.6 V
3.6 V
ICC
IIN
V2
IIN
VSS
PWRPAD
Figure 11. Configuration for IC Current Consumption Test
Copyright © 2011–2012, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
bq294502, bq294504, bq294512, bq294515
bq294522, bq294524, bq294532, bq294562
bq294572, bq294582, bq294592
SLUSAJ3C –SEPTEMBER 2011–REVISED MAY 2012
www.ti.com
REVISION HISTORY
Changes from Original (September 2011) to Revision A
Page
•
Added the bq294582 Device to Production Data ................................................................................................................. 2
Changes from Revision A (November 2011) to Revision B
Page
•
•
•
•
•
Changed the bq294504 Device to Production Data ............................................................................................................. 1
Added the bq294512 Device ................................................................................................................................................ 1
Added the bq294592 Device ................................................................................................................................................ 1
Added a second ICC Test Condition ...................................................................................................................................... 5
Changed Fault Detection Delay Time in bq2945x4 Test Mode Specifications ..................................................................... 5
Changes from Revision B (February 2012) to Revision C
Page
•
•
•
•
•
•
•
Added the bq294515 Device to Production Data ................................................................................................................. 2
Added the bq294524 Device to Production Data ................................................................................................................. 2
Added the bq294532 Device to Production Data ................................................................................................................. 2
Added the bq294572 Device to Production Data ................................................................................................................. 2
Changed Overvoltage Detection Hysteresis ......................................................................................................................... 5
Added Output Voltage Versus Output Current graphic ........................................................................................................ 7
Changed Timing for Customer Test Mode figure ................................................................................................................. 9
10
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Link(s): bq294502 bq294504 bq294512 bq294515 bq294522 bq294524 bq294532 bq294562
bq294572 bq294582 bq294592
PACKAGE OPTION ADDENDUM
www.ti.com
28-May-2012
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
BQ294502DRVR
BQ294502DRVT
BQ294504DRVR
BQ294504DRVT
BQ294512DRVR
BQ294512DRVT
BQ294515DRVR
BQ294515DRVT
BQ294522DRVR
BQ294522DRVT
BQ294582DRVR
BQ294582DRVT
BQ294592DRVR
BQ294592DRVT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PREVIEW
PREVIEW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
6
6
6
6
6
6
6
6
6
6
6
6
6
6
3000
250
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
CU NIPDAU Level-2-260C-1 YEAR
3000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
3000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
3000
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
3000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
3000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
3000
250
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
28-May-2012
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
6-Jun-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
BQ294502DRVR
BQ294502DRVT
BQ294504DRVR
BQ294504DRVT
BQ294512DRVR
BQ294512DRVT
BQ294522DRVR
BQ294522DRVT
BQ294582DRVR
BQ294582DRVT
BQ294592DRVR
BQ294592DRVT
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
6
6
6
6
6
6
6
6
6
6
6
6
3000
250
330.0
180.0
330.0
180.0
330.0
180.0
330.0
180.0
330.0
180.0
330.0
180.0
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
Q2
Q2
Q2
Q2
Q2
Q2
Q2
Q2
Q2
Q2
Q2
Q2
3000
250
3000
250
3000
250
3000
250
3000
250
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
6-Jun-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
BQ294502DRVR
BQ294502DRVT
BQ294504DRVR
BQ294504DRVT
BQ294512DRVR
BQ294512DRVT
BQ294522DRVR
BQ294522DRVT
BQ294582DRVR
BQ294582DRVT
BQ294592DRVR
BQ294592DRVT
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
SON
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
DRV
6
6
6
6
6
6
6
6
6
6
6
6
3000
250
346.0
210.0
346.0
210.0
346.0
210.0
346.0
210.0
346.0
210.0
346.0
210.0
346.0
185.0
346.0
185.0
346.0
185.0
346.0
185.0
346.0
185.0
346.0
185.0
29.0
35.0
29.0
35.0
29.0
35.0
29.0
35.0
29.0
35.0
29.0
35.0
3000
250
3000
250
3000
250
3000
250
3000
250
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明