DS110DF410SQE/NOPB [TI]
具有自适应 EQ、CDR 和 DFE 的 8.5Gbps 至 11.3Gbps 四通道重定时器 | RHS | 48 | -40 to 85;型号: | DS110DF410SQE/NOPB |
厂家: | TEXAS INSTRUMENTS |
描述: | 具有自适应 EQ、CDR 和 DFE 的 8.5Gbps 至 11.3Gbps 四通道重定时器 | RHS | 48 | -40 to 85 CD |
文件: | 总5页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ADVANCE
DS110RT410, DS110DF410
PRODUCT BRIEF
INFORMATION
January 20, 2012
Low Power Multi-Rate Quad Channel Retimer
General Description
Features
■
The DS110RT410/DS110DF410 is a four-channel multi-rate
retimer with integrated signal conditioning. Both the
DS110RT410 and the DS110DF410 include an input Contin-
uous-Time Linear Equalizer (CTLE) on each channel. The
DS110DF410 also includes a five-tap Decision Feedback
Equalizer (DFE) on each channel.
All devices in the retimer family are pin compatible with
each other and with the quad buffer-repeater. The pin-
compatible device family includes the following:
DS100RT410 (EQ+CDR+DE): 10.3125 Gbps
DS100DF410 (EQ+DFE+CDR+DE): 10.3125 Gbps
DS110RT410 (EQ+CDR+DE): 8.5 - 11.3 Gbps
DS110DF410 (EQ+DFE+CDR+DE): 8.5 - 11.3 Gbps
DS125RT410 (EQ+CDR+DE): 9.8 - 12.5 Gbps
DS125DF410 (EQ+DFE+CDR+DE): 9.8 - 12.5 Gbps
DS100BR410 (EQ+DE): Up to 10.3125 Gbps
—
—
—
—
—
—
—
The DS110DF410 can enhance the reach and robustness of
long, lossy, crosstalk-impaired high speed serial links to
achieve BER < 1×10-15. For less demanding applications/in-
terconnects, the non-DFE variant DS110RT410 can be used
to achieve the same BER performance. The two devices are
pin-compatible.
Typical Power Dissipation (EQ+CDR+DE): 150 mW / chn
■
■
Each channel of the DS110RT410/DS110DF410 indepen-
dently locks to serial data at data rates from 8.5 to 11.3 Gbps
or to any supported submultiple of these data rates. A refer-
ence clock is not required, which simplifies system design and
lowers overall cost. Both the DS110RT410/DS110DF410
support half-rate, quarter-rate and one-eighth-rate for back-
ward compatibility. A protocol select mode is available to
speed up lock time.
Typical Power Dissipation (EQ+DFE+CDR+DE): 180
mW / chn
Locks to 1/2, 1/4, 1/8 legacy data rates
■
■
■
■
■
■
■
■
■
■
Fast lock operation based on protocol select mode
Adaptive equalization up to 34 dB boost at 5 GHz
Adjustable transmit VOD : 600 to 1300 mVp-p
Adjustable transmit de-emphasis to -12 dB
Programmable output polarity inversion
Input signal detection, CDR lock detection/indicator
On-chip Eye Monitor (EOM), PRBS generator
Single 2.5 V ±5% power supply
Programmable transmit de-emphasis (up to -12 dB), transmit
VOD (up to 1300 mVp-p) and adaptive receive equalization (up
to 34 dB boost at 5 GHz) enable data transmission over lossy
copper cables of typical lengths greater than 10 m or back-
planes with multiple connectors and typical trace lengths
greater than 40 inches. The CDR function is ideal for use in
parallel optical modules to reset the jitter budget and retime
high speed serial data.
SMBus/EEPROM configuration modes
Applications
The programmable settings can be applied easily using the
SMBus interface or they can be loaded via an external EEP-
ROM. An on-chip eye monitor and a PRBS generator allow
real-time measurement of high speed serial data for system
bring-up or field tuning.
Host-side front-port and backplane interface, SFF-8431,
SFF-8436
Ethernet: 10GbE, 1GbE
■
■
■
■
■
Infiniband: SDR, DDR, QDR
Fibre-Channel: 2GFC, 4GFC, 8GFC, 10GFC
The device is offered in a 48-pin LLP, 7 mm x 7 mm flow-
through package.
SDH/SONET : OC-48 (2.488 Gbps), OC-192 (9.952 Gbps)
Notice: This document is not a full datasheet. For more
information regarding this product or to order samples
please contact your local Texas Instruments sales office
or visit http://www.ti.com.
© 2012 Texas Instruments Incorporated
301770 SNLS397
www.ti.com
Typical Application Diagram
30177080
www.ti.com
2
3
www.ti.com
Notes
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明