LM341-12 [TI]
3-Terminal Positive Voltage Regulators; 3端子正电压稳压器
| 型号： | LM341-12 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 3-Terminal Positive Voltage Regulators |
| 文件： | 总13页 (文件大小：729K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LM341,LM78M05,LM78M12,LM78M15
LM341/LM78MXX Series 3-Terminal Positive Voltage Regulators
Literature Number: SNVS090E
August 2005
LM341/LM78MXX Series
3-Terminal Positive Voltage Regulators
General Description
Features
n Output current in excess of 0.5A
n No external components
The LM341 and LM78MXX series of three-terminal positive
voltage regulators employ built-in current limiting, thermal
shutdown, and safe-operating area protection which makes
them virtually immune to damage from output overloads.
n Internal thermal overload protection
n Internal short circuit current-limiting
n Output transistor safe-area compensation
n Available in TO-220, TO-39, and TO-252 D-PAK
packages
With adequate heatsinking, they can deliver in excess of
0.5A output current. Typical applications would include local
(on-card) regulators which can eliminate the noise and de-
graded performance associated with single-point regulation.
n Output voltages of 5V, 12V, and 15V
Connection Diagrams
TO-39 Metal Can Package (H)
01048405
Bottom View
Order Number LM78M05CH, LM78M12CH or LM78M15CH
See NS Package Number H03A
TO-220 Power Package (T)
01048406
Top View
Order Number LM341T-5.0, LM341T-12, LM341T-15, LM78M05CT, LM78M12CT or LM78M15CT
See NS Package Number T03B
TO-252
01048419
Top View
Order Number LM78M05CDT
See NS Package Number TD03B
© 2005 National Semiconductor Corporation
DS010484
www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Operating Junction Temperature
Range
−40˚C to +125˚C
Internally Limited
Power Dissipation (Note 2)
Input Voltage
Lead Temperature (Soldering, 10 seconds)
5V ≤ VO ≤ 15V
35V
TO-39 Package (H)
TO-220 Package (T)
300˚C
260˚C
ESD Susceptibility
TBD
Storage Temperature Range
−65˚C to +150˚C
Electrical Characteristics
Limits in standard typeface are for TJ = 25˚C, and limits in boldface type apply over the −40˚C to +125˚C operating temperature
range. Limits are guaranteed by production testing or correlation techniques using standard Statistical Quality Control (SQC)
methods.
LM341-5.0, LM78M05C
Unless otherwise specified: VIN = 10V, CIN = 0.33 µF, CO = 0.1 µF
Symbol
VO
Parameter
Output Voltage
Conditions
Min
4.8
Typ
5.0
5.0
Max
5.2
Units
IL= 500 mA
V
5 mA ≤ IL ≤ 500 mA
4.75
5.25
PD ≤ 7.5W, 7.5V ≤ VIN ≤ 20V
VR LINE
Line Regulation
7.2V ≤ VIN ≤ 25V
IL = 100 mA
IL = 500 mA
50
100
100
10.0
0.5
mV
mA
VR LOAD
IQ
Load Regulation
5 mA ≤ IL ≤ 500 mA
IL = 500 mA
Quiescent Current
4
∆IQ
Quiescent Current Change
5 mA ≤ IL ≤ 500 mA
7.5V ≤ VIN ≤ 25V, IL = 500 mA
f = 10 Hz to 100 kHz
1.0
Vn
Output Noise Voltage
Ripple Rejection
40
78
µV
dB
V
f = 120 Hz, IL = 500 mA
VIN
Input Voltage Required
to Maintain Line Regulation
Long Term Stability
IL = 500 mA
IL = 500 mA
7.2
∆VO
20
mV/khrs
www.national.com
2
Electrical Characteristics
Limits in standard typeface are for TJ = 25˚C, and limits in boldface type apply over the −40˚C to +125˚C operating temperature
range. Limits are guaranteed by production testing or correlation techniques using standard Statistical Quality Control (SQC)
methods. (Continued)
LM341-12, LM78M12C
Unless otherwise specified: VIN = 19V, CIN = 0.33 µF, CO = 0.1 µF
Symbol
VO
Parameter
Output Voltage
Conditions
Min
11.5
11.4
Typ
12
Max
12.5
12.6
Units
IL= 500 mA
V
5 mA ≤ IL ≤ 500 mA
12
PD ≤ 7.5W, 14.8V ≤ VIN ≤ 27V
VR LINE
Line Regulation
14.5V ≤ VIN ≤ 30V
IL = 100 mA
IL = 500 mA
120
240
240
10.0
0.5
mV
mA
VR LOAD
IQ
Load Regulation
5 mA ≤ IL ≤ 500 mA
IL = 500 mA
Quiescent Current
4
∆IQ
Quiescent Current Change
5 mA ≤ IL ≤ 500 mA
14.8V ≤ VIN ≤ 30V, IL = 500 mA
f = 10 Hz to 100 kHz
1.0
Vn
Output Noise Voltage
Ripple Rejection
75
71
µV
dB
V
f = 120 Hz, IL = 500 mA
VIN
Input Voltage Required
to Maintain Line Regulation
Long Term Stability
IL = 500 mA
IL = 500 mA
14.5
∆VO
48
mV/khrs
LM341-15, LM78M15C
Unless otherwise specified: VIN = 23V, CIN = 0.33 µF, CO = 0.1 µF
Symbol Parameter Conditions
VO Output Voltage
Min
14.4
Typ
15
Max
15.6
Units
IL= 500 mA
V
5 mA ≤ IL ≤ 500 mA
14.25
15
15.75
PD ≤ 7.5W, 18V ≤ VIN ≤ 30V
VR LINE
Line Regulation
17.6V ≤ VIN ≤ 30V
IL = 100 mA
IL = 500 mA
150
300
300
10.0
0.5
mV
mA
VR LOAD
IQ
Load Regulation
5 mA ≤ IL ≤ 500 mA
IL = 500 mA
Quiescent Current
4
∆IQ
Quiescent Current Change
5 mA ≤ IL ≤ 500 mA
18V ≤ VIN ≤ 30V, IL = 500 mA
f = 10 Hz to 100 kHz
1.0
Vn
Output Noise Voltage
Ripple Rejection
90
69
µV
dB
V
f = 120 Hz, IL = 500 mA
VIN
Input Voltage Required
to Maintain Line Regulation
Long Term Stability
IL = 500 mA
IL = 500 mA
17.6
∆VO
60
mV/khrs
Note 1: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the
device outside of its rated operating conditions.
Note 2: The typical thermal resistance of the three package types is:
T (TO-220) package: θ
H (TO-39) package: θ
= 60 ˚C/W, θ
= 5 ˚C/W
= 18 ˚C/W
= 10 ˚C/W
(JA)
(JC)
= 120 ˚C/W, θ
(JA)
(JC)
DT (TO-252) package: θ
= 92 ˚C/W, θ
(JC)
(JA)
3
www.national.com
Schematic Diagram
01048401
www.national.com
4
Typical Performance Characteristics
Peak Output Current
Ripple Rejection
01048410
01048411
Ripple Rejection
Dropout Voltage
01048412
01048413
Output Voltage (Normalized
to 1V at TJ = 25˚C)
Quiescent Current
01048415
01048414
5
www.national.com
Typical Performance Characteristics (Continued)
Quiescent Current
Output Impedance
01048416
01048417
Line Transient Response
Load Transient Response
01048407
01048408
duction heat transfer is demonstrated in The heat generated
at the device junction flows through the die to the die attach
pad, through the lead frame to the surrounding case mate-
rial, to the printed circuit board, and eventually to the ambi-
ent environment. Below is a list of variables that may affect
the thermal resistance and in turn the need for a heatsink.
Design Considerations
The LM78MXX/LM341XX fixed voltage regulator series has
built-in thermal overload protection which prevents the de-
vice from being damaged due to excessive junction tem-
perature.
The regulators also contain internal short-circuit protection
which limits the maximum output current, and safe-area
protection for the pass transistor which reduces the short-
circuit current as the voltage across the pass transistor is
increased.
RθJC(Component
Variables)
RθCA(Application
Variables)
Leadframe Size & Material Mounting Pad Size,
Material, & Location
Although the internal power dissipation is automatically lim-
ited, the maximum junction temperature of the device must
be kept below +125˚C in order to meet data sheet specifica-
tions. An adequate heatsink should be provided to assure
this limit is not exceeded under worst-case operating condi-
tions (maximum input voltage and load current) if reliable
performance is to be obtained).
No. of Conduction Pins
Die Size
Placement of Mounting Pad
PCB Size & Material
Traces Length & Width
Adjacent Heat Sources
Die Attach Material
Molding Compound Size
and Material
Volume of Air
1.0 HEATSINK CONSIDERATIONS
Air Flow
When an integrated circuit operates with appreciable cur-
rent, its junction temperature is elevated. It is important to
quantify its thermal limits in order to achieve acceptable
performance and reliability. This limit is determined by sum-
ming the individual parts consisting of a series of tempera-
ture rises from the semiconductor junction to the operating
environment. A one-dimension steady-state model of con-
Ambient Temperature
Shape of Mounting Pad
www.national.com
6
The LM78MXX/LM341XX regulators have internal thermal
shutdown to protect the device from over-heating. Under all
possible operating conditions, the junction temperature of
the LM78MXX/LM341XX must be within the range of 0˚C to
125˚C. A heatsink may be required depending on the maxi-
mum power dissipation and maximum ambient temperature
of the application. To determine if a heatsink is needed, the
power dissipated by the regulator, PD, must be calculated:
Application Information
IIN = IL + IG
PD = (VIN−VOUT) IL + VIN G
I
01048423
shows the voltages and currents which are present in the
circuit.
FIGURE 1. Cross-sectional view of Integrated Circuit
Mounted on a printed circuit board. Note that the case
temperature is measured at the point where the leads
contact with the mounting pad surface
01048424
FIGURE 2. Power Dissipation Diagram
The next parameter which must be calculated is the maxi-
mum allowable temperature rise, TR(max):
we used to measure these θJA are shown at the end of the
Application Note Section. reflects the same test results as
what are in the Table 1
θJA = TR (max)/PD
shows the maximum allowable power dissipation vs. ambi-
ent temperature for theTO-252 device. shows the maximum
allowable power dissipation vs. copper area (in2) for the
TO-252 device. Please see AN1028 for power enhancement
techniques to be used with TO-252 package.
If the maximum allowable value for θJA˚C/w is found to be
≥60˚C/W for TO-220 package or ≥92˚C/W for TO-252 pack-
age, no heatsink is needed since the package alone will
dissipate enough heat to satisfy these requirements. If the
calculated value for θJA fall below these limits, a heatsink is
required.
As a design aid, Table 1 shows the value of the θJA of
TO-252 for different heatsink area. The copper patterns that
7
www.national.com
Application Information (Continued)
TABLE 1. θJA Different Heatsink Area
Layout
Copper Area
Thermal Resistance
Top Sice (in2)*
Bottom Side (in2)
(θJA, ˚C/W) TO-252
1
2
0.0123
0.066
0.3
0
0
103
87
60
54
52
47
84
70
63
57
57
89
72
61
55
53
3
0
4
0.53
0.76
1
0
5
0
6
0
7
0
0.2
0.4
0.6
0.8
1
8
0
9
0
10
11
12
13
14
15
16
0
0
0.066
0.175
0.284
0.392
0.5
0.066
0.175
0.284
0.392
0.5
*Tab of device attached to topside copper
www.national.com
8
Application Information (Continued)
01048421
01048420
FIGURE 5. Maximum Allowable Power Dissipation vs.
2oz. Copper Area for TO-252
FIGURE 3. θJA vs. 2oz Copper Area for TO-252
Typical Application
01048409
*Required if regulator input is more than 4 inches from input filter capacitor
(or if no input filter capacitor is used).
01048422
**Optional for improved transient response.
FIGURE 4. Maximum Allowable Power Dissipation vs.
Ambient Temperature for TO-252
9
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted
TO-39 Metal Can Package (H)
Order Number LM78M05CH, LM78M12CH or LM78M15CH
NS Package Number H03A
TO-220 Power Package (T)
Order Number LM341T-5.0, LM341T-12, LM341T-15, LM78M05CT, LM78M12CT or LM78M15CT
NS Package Number T03B
www.national.com
10
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
TO-252
Order Number LM78M05CDT
NS Package Number TD03B
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
National Semiconductor
Americas Customer
Support Center
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
National Semiconductor
Asia Pacific Customer
Support Center
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: new.feedback@nsc.com
Tel: 1-800-272-9959
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
Email: ap.support@nsc.com
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
www.national.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Transportation and Automotive www.ti.com/automotive
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
LM3410XMFX
525kHz/1.6MHz, Constant Current Boost and SEPIC LED Driver with Internal Compensation
NSC
©2020 ICPDF网 联系我们和版权申明