LMV821IDCKRE4 [TI]
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS; 低电压轨到轨输出运算放大器
| 型号： | LMV821IDCKRE4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS |
| 文件： | 总31页 (文件大小：650K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
FEATURES
LMV824 . . . D, DGV, OR PW PACKAGE
•
•
•
•
2.5-V, 2.7-V, and 5-V Performance
(TOP VIEW)
–40°C to 125°C Operation
No Crossover Distortion
1
2
3
4
5
6
7
14 4OUT
1OUT
1IN−
1IN+
13
12
11
10
9
4IN−
4IN+
Low Supply Current at VCC+ = 5 V:
– LMV821…0.3 mA Typ
GND/V
3IN+
V
CC+
CC−
– LMV822…0.5 mA Typ
2IN+
2IN−
3IN−
3OUT
– LMV824…1 mA Typ
8
2OUT
•
•
•
Rail-to-Rail Output Swing
Gain Bandwidth of 5.5 MHz Typ at 5 V
Slew Rate of 1.9 V/µs Typ at 5 V
LMV822 . . . D OR DGK PACKAGE
(TOP VIEW)
DESCRIPTION/ORDERING INFORMATION
1OUT
1IN −
1IN+
V
CC+
1
2
3
4
8
7
6
5
The LMV821 single, LMV822 dual, and LMV824 quad
devices are low-voltage (2.5 V to 5.5 V), low-power
2OUT
2IN −
2IN+
commodity
operational
amplifiers.
Electrical
GND/V
CC−
characteristics are very similar to the LMV3xx
operational amplifiers (low supply current, rail-to-rail
outputs, input common-mode range that includes
ground). However, the LMV8xx devices offer a higher
bandwidth (5.5 MHz typical) and faster slew rate
(1.9 V/µs typical).
LMV821 . . . DBV OR DCK PACKAGE
(TOP VIEW)
1
2
3
5
4
IN+
V
CC+
GND/V
The LMV8xx devices are cost-effective solutions for
CC−
applications
requiring
low-voltage/low-power
IN−
OUT
operation and space-saving considerations. The
LMV821 is available in the ultra-small DCK package,
which is approximately half the size of SOT-23-5. The
DCK package saves space on printed circuit boards
and enables the design of small portable electronic
devices (cordless and cellular phones, laptops, PDAs,
PCMIA). It also allows the designer to place the
device closer to the signal source to reduce noise
pickup and increase signal integrity.
The LMV8xx devices are characterized for operation
from –40°C to 85°C. The LMV8xxI devices are
characterized for operation from –40°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004–2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
LMV821DCKR
LMV821DCKT
LMV821DBVR
LMV821DBVT
LMV822D
TOP-SIDE MARKING(2)
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Tube of 75
SC-70 – DCK
RY_
Single
Dual
SOT-23 – DBV
SOIC – D
RB8_
MV822
RA_
Reel of 2500
Tube of 100
Reel of 2500
Tube of 50
LMV822DR
–40°C to 85°C
LMV822DGK
LMV822DGKR
LMV824D
MSOP/VSSOP – DGK
SOIC – D
LMV824
Reel of 2500
Tube of 90
LMV824DR
Quad
LMV824PW
TSSOP – PW
TVSOP – DGV
SC-70 – DCK
MV824
MV824
RZ_
Reel of 2000
Reel of 2000
Reel of 3000
Reel of 250
Reel of 3000
Reel of 250
Tube of 75
LMV824PWR
LMV824DGVR
LMV821IDCKR
LMV821IDCKT
LMV821IDBVR
LMV821IDBVT
LMV822ID
Single
Dual
SOT-23 – DBV
SOIC – D
RB1_
MV822I
R8_
Reel of 2500
Tube of 100
Reel of 2500
Tube of 50
LMV822IDR
–40°C to 125°C
LMV822IDGK
LMV822IDGKR
LMV824ID
MSOP/VSSOP – DGK
SOIC – D
LMV824I
Reel of 2500
Tube of 90
LMV824IDR
Quad
LMV824IPW
TSSOP – PW
TVSOP – DGV
MV824I
MV824I
Reel of 2000
Reel of 2000
LMV824IPWR
LMV824IDGVR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DBV/DCK/DGK: The actual top-side marking has one additional character that designates the assembly/test site.
2
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
SYMBOL (EACH AMPLIFIER)
−
IN −
OUT
+
IN +
LMV824 SIMPLIFIED SCHEMATIC
V
CC
V
BIAS1
V
CC
+
−
V
BIAS2
V
BIAS5
+
−
+
Output
V
CC
V
CC
−
V
BIAS3
+
−
IN−
IN+
V
BIAS4
+
−
3
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
5.5
UNIT
VCC Supply voltage(2)
V
VID
VI
Differential input voltage(3)
±VCC
VCC+
Unlimited
97
V
V
Input voltage range (either input)
Duration of output short circuit (one amplifier) to ground(4)
VCC–
At or below TA = 25°C, VCC ≤ 5.5 V
8 pin
D package
14 pin
86
DBV package
DCK package
DGK package
DGV package
PW package
206
θJA
Package thermal impedance(5)(6)
252
°C/W
172
127
113
TJ
Operating virtual junction temperature
Storage temperature range
150
°C
°C
Tstg
–65
150
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions
MIN
2.5
MAX
5
UNIT
VCC Supply voltage (single-supply operation)
TA Operating free-air temperature
V
LMV8xxI
LMV8xx
–40
–40
125
85
°C
4
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xx 2.5-V Electrical Characteristics
VCC+ = 2.5 V, VCC– = 0 V, VIC = 1 V, VO = 1.25 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xx
TYP
1
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
MAX
3.5
4
25°C
–40°C to 85°C
25°C
VIO
Input offset voltage
mV
2.3
2.2
2.37
0.13
2.46
0.08
High level
Low level
High level
Low level
–40°C to 85°C
25°C
VCC+ = 2.5 V, RL = 600 Ω to 1.25 V
0.2
0.3
–40°C to 85°C
25°C
VO
Output swing
V
2.4
2.3
–40°C to 85°C
25°C
VCC+ = 2.5 V, RL = 2 kΩ to 1.25 V
0.12
0.2
–40°C to 85°C
LMV8xxI 2.5-V Electrical Characteristics
VCC+ = 2.5 V, VCC– = 0 V, VIC = 1 V, VO = 1.25 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xxI
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
3.5
25°C
–40°C to 125°C
25°C
1
VIO
Input offset voltage
mV
5.5
2.28
2.18
2.37
0.13
2.46
0.08
High level
Low level
High level
Low level
–40°C to 125°C
25°C
VCC+ = 2.5 V, RL = 600 Ω to 1.25 V
0.22
0.32
–40°C to 125°C
25°C
VO
Output swing
V
2.38
2.28
–40°C to 125°C
25°C
VCC+ = 2.5 V, RL = 2 kΩ to 1.25 V
0.14
0.22
–40°C to 125°C
5
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xx 2.7-V Electrical Characteristics
VCC+ = 2.7 V, VCC– = 0 V, VIC = 1 V, VO = 1.35 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xx
TYP
1
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
MAX
25°C
3.5
4
VIO
αVIO
IIB
Input offset voltage
mV
µV/°C
nA
–40°C to 85°C
Average temperature coefficient
of input offset voltage
25°C
1
25°C
–40°C to 85°C
25°C
30
90
140
30
Input bias current
Input offset current
0.5
85
85
85
IIO
nA
dB
dB
–40°C to 85°C
25°C
50
70
68
75
70
73
70
CMRR Common-mode rejection ratio
VIC = 0 to 1.7 V
–40°C to 85°C
25°C
Positive supply-voltage
+kSVR
VCC+ = 1.7 V to 4 V, VCC– = –1 V,
VO = 0, VIC = 0
rejection ratio
–40°C to 85°C
25°C
Negative supply-voltage
–kSVR
VCC+ = 1.7 V, VCC– = –1 V to –3.3 V,
VO = 0, VIC = 0
dB
V
rejection ratio
–40°C to 85°C
Common-mode input
voltage range
–0.2
to 1.9
–0.3
to 2
VICR
CMRR ≥ 50 dB
25°C
25°C
–40°C to 85°C
25°C
90
85
85
80
95
90
90
85
2.5
2.4
100
RL = 600 Ω to 1.35 V,
Sourcing
VO = 1.35 V to 2.2 V
90
RL = 600 Ω to 1.35 V,
Sinking
VO = 1.35 V to 0.5 V
–40°C to 85°C
25°C
Large-signal voltage
amplification
AV
dB
100
95
RL = 2 kΩ to 1.35 V,
Sourcing
VO = 1.35 V to 2.2 V
–40°C to 85°C
25°C
RL = 2 kΩ to 1.35 V,
Sinking
VO = 1.35 V to 0.5 V
–40°C to 85°C
25°C
2.58
0.13
2.66
0.08
High level
VCC+ = 2.7 V,
–40°C to 85°C
25°C
RL = 600 Ω to 1.35 V
0.2
0.3
Low level
–40°C to 85°C
25°C
VO
Output swing
V
2.6
2.5
High level
VCC+ = 2.7 V,
–40°C to 85°C
25°C
RL = 2 kΩ to 1.35 V
0.12
0.2
Low level
–40°C to 85°C
25°C
VO = 0 V
Sourcing
Sinking
12
12
16
26
IO
Output current
Supply current
mA
mA
VO = 2.7 V
25°C
25°C
0.22
0.3
0.5
0.6
0.8
1
LMV821
–40°C to 85°C
25°C
0.45
0.72
ICC
LMV822 (both amplifiers)
–40°C to 85°C
25°C
LMV824 (all four amplifiers)
–40°C to 85°C
1.2
6
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xx 2.7-V Electrical Characteristics (continued)
VCC+ = 2.7 V, VCC– = 0 V, VIC = 1 V, VO = 1.35 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xx
TYP
1.7
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
MAX
SR
GBW Gain bandwidth product
Slew rate(1)
25°C
25°C
25°C
25°C
25°C
25°C
25°C
V/µs
MHz
deg
(2)
(2)
(2)
5
Φm
Phase margin
60
Gain margin
8.6
dB
Amplifier-to-amplifier isolation
Equivalent input noise voltage
Equivalent input noise current
VCC+ = 5 V, RL = 100 kΩ to 2.5 V(3)
f = 1 kHz, VIC = 1 V
f = 1 kHz
135
45
dB
Vn
In
nV/√Hz
pA/√Hz
0.18
f = 1 kHz, AV = –2, RL = 10 kΩ,
VO = 4.1 Vp-p
THD
Total harmonic distortion
25°C
0.01
%
(1) Connected as voltage follower with 1-V step input. Value specified is the slower of the positive and negative slew rates.
(2) 40-dB closed-loop dc gain, CL = 22 pF
(3) Each amplifier excited in turn with 1 kHz to produce VO = 3 Vp-p
7
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xxI 2.7-V Electrical Characteristics
VCC+ = 2.7 V, VCC– = 0 V, VIC = 1 V, VO = 1.35 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xxI
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
25°C
1
3.5
5.5
VIO
αVIO
IIB
Input offset voltage
mV
µV/°C
nA
–40°C to 125°C
Average temperature coefficient
of input offset voltage
25°C
1
25°C
–40°C to 125°C
25°C
30
90
140
30
Input bias current
Input offset current
0.5
85
85
85
IIO
nA
dB
dB
–40°C to 125°C
25°C
50
70
68
75
70
73
70
CMRR Common-mode rejection ratio
VIC = 0 to 1.7 V
–40°C to 125°C
25°C
Positive supply-voltage
+kSVR
VCC+ = 1.7 V to 4 V, VCC– = –1 V,
VO = 0, VIC = 0
rejection ratio
–40°C to 125°C
25°C
Negative supply-voltage
–kSVR
VCC+ = 1.7 V, VCC– = –1 V to –3.3 V,
VO = 0, VIC = 0
dB
V
rejection ratio
–40°C to 125°C
Common-mode input
voltage range
–0.2
to 1.9
–0.3
to 2
VICR
CMRR ≥ 50 dB
25°C
25°C
–40°C to 125°C
25°C
90
85
85
80
95
90
90
85
2.5
2.4
100
RL = 600 Ω to 1.35 V,
Sourcing
VO = 1.35 V to 2.2 V
90
RL = 600 Ω to 1.35 V,
Sinking
VO = 1.35 V to 0.5 V
–40°C to 125°C
25°C
Large-signal voltage
amplification
AV
dB
100
95
RL = 2 kΩ to 1.35 V,
Sourcing
VO = 1.35 V to 2.2 V
–40°C to 125°C
25°C
RL = 2 kΩ to 1.35 V,
Sinking
VO = 1.35 V to 0.5 V
–40°C to 125°C
25°C
2.58
0.13
2.66
0.08
High level
VCC+ = 2.7 V,
–40°C to 125°C
25°C
RL = 600 Ω to 1.35 V
0.2
0.3
Low level
–40°C to 125°C
25°C
VO
Output swing
V
2.6
2.5
High level
VCC+ = 2.7 V,
–40°C to 125°C
25°C
RL = 2 kΩ to 1.35 V
0.12
0.2
Low level
–40°C to 125°C
25°C
VO = 0 V
Sourcing
Sinking
12
12
16
26
IO
Output current
Supply current
mA
mA
VO = 2.7 V
25°C
25°C
0.22
0.3
0.5
0.6
0.8
1
LMV821
–40°C to 125°C
25°C
0.45
0.72
ICC
LMV822 (both amplifiers)
–40°C to 125°C
25°C
LMV824 (all four amplifiers)
–40°C to 125°C
1.2
8
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xxI 2.7-V Electrical Characteristics (continued)
VCC+ = 2.7 V, VCC– = 0 V, VIC = 1 V, VO = 1.35 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xxI
TYP
1.7
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
MAX
SR
GBW Gain bandwidth product
Slew rate(1)
25°C
25°C
25°C
25°C
25°C
25°C
25°C
V/µs
MHz
deg
(2)
(2)
(2)
5
Φm
Phase margin
60
Gain margin
8.6
dB
Amplifier-to-amplifier isolation
Equivalent input noise voltage
Equivalent input noise current
VCC+ = 5 V, RL = 100 kΩ to 2.5 V(3)
f = 1 kHz, VIC = 1 V
f = 1 kHz
135
45
dB
Vn
In
nV/√Hz
pA/√Hz
0.18
f = 1 kHz, AV = –2, RL = 10 kΩ,
VO = 4.1 Vp-p
THD
Total harmonic distortion
25°C
0.01
%
(1) Connected as voltage follower with 1-V step input. Value specified is the slower of the positive and negative slew rates.
(2) 40-dB closed-loop dc gain, CL = 22 pF
(3) Each amplifier excited in turn with 1 kHz to produce VO = 3 Vp-p
9
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xx 5-V Electrical Characteristics
VCC+ = 5 V, VCC– = 0 V, VIC = 2 V, VO = 2.5 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xx
TYP
1
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
MAX
25°C
3.5
4
VIO
αVIO
IIB
Input offset voltage
mV
µV/°C
nA
–40°C to 85°C
Average temperature coefficient
of input offset voltage
25°C
1
25°C
–40°C to 85°C
25°C
40
100
150
30
Input bias current
Input offset current
0.5
90
IIO
nA
dB
dB
–40°C to 85°C
25°C
50
72
70
CMRR Common-mode rejection ratio
VIC = 0 to 4 V
–40°C to 85°C
25°C
75
85
Positive supply-voltage
+kSVR
VCC+ = 1.7 V to 4 V, VCC– = –1 V,
VO = 0, VIC = 0
rejection ratio
–40°C to 85°C
25°C
70
73
85
Negative supply-voltage
–kSVR
VCC+ = 1.7 V, VCC– = –1 V to –3.3 V,
VO = 0, VIC = 0
dB
V
rejection ratio
–40°C to 85°C
70
Common-mode input
voltage range
–0.2
–0.3
to 4.2 to 4.3
VICR
CMRR ≥ 50 dB
25°C
25°C
–40°C to 85°C
25°C
95
90
105
105
105
105
4.84
0.17
4.9
0.1
45
RL = 600 Ω to 2.5 V,
Sourcing
VO = 2.5 V to 4.5 V
95
RL = 600 Ω to 2.5 V,
Sinking
VO = 2.5 V to 0.5 V
–40°C to 85°C
25°C
90
Large-signal voltage
amplification
AV
dB
95
RL = 2 kΩ to 2.5 V,
Sourcing
VO = 2.5 V to 4.5 V
–40°C to 85°C
25°C
90
95
RL = 2 kΩ to 2.5 V,
Sinking
VO = 2.5 V to 0.5 V
–40°C to 85°C
25°C
90
4.75
4.7
High level
VCC+ = 5 V,
–40°C to 85°C
25°C
RL = 600 Ω to 2.5 V
0.25
0.3
Low level
–40°C to 85°C
25°C
VO
Output swing
V
4.85
4.8
High level
VCC+ = 5 V,
–40°C to 85°C
25°C
RL = 2 kΩ to 2.5 V
0.15
0.2
Low level
–40°C to 85°C
25°C
20
15
20
15
VO = 0 V
Sourcing
Sinking
–40°C to 85°C
25°C
IO
Output current
Supply current
mA
mA
40
VO = 5 V
–40°C to 85°C
25°C
0.3
0.5
1
0.4
0.6
0.7
0.9
0.3
1.5
LMV821
–40°C to 85°C
25°C
ICC
LMV822 (both amplifiers)
–40°C to 85°C
25°C
LMV824 (all four amplifiers)
–40°C to 85°C
10
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xx 5-V Electrical Characteristics (continued)
VCC+ = 5 V, VCC– = 0 V, VIC = 2 V, VO = 2.5 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xx
TYP
1.9
PARAMETER
TEST CONDITIONS
VCC+ = 5 V(1)
TA
UNIT
MIN
MAX
SR
Slew rate
25°C
25°C
25°C
25°C
25°C
25°C
25°C
1.4
V/µs
MHz
deg
(2)
(2)
(2)
GBW Gain bandwidth product
5.5
Φm
Phase margin
64.2
8.7
Gain margin
dB
Amplifier-to-amplifier isolation
Equivalent input noise voltage
Equivalent input noise current
VCC+ = 5 V, RL = 100 kΩ to 2.5 V(3)
f = 1 kHz, VIC = 1 V
f = 1 kHz
135
42
dB
Vn
In
nV/√Hz
pA/√Hz
0.2
f = 1 kHz, AV = –2, RL = 10 kΩ,
VO = 4.1 Vp-p
THD
Total harmonic distortion
25°C
0.01
%
(1) Connected as voltage follower with 3-V step input. Value specified is the slower of the positive and negative slew rates.
(2) 40-dB closed-loop dc gain, CL = 22 pF
(3) Each amplifier excited in turn with 1 kHz to produce VO = 3 Vp-p
11
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xxI 5-V Electrical Characteristics
VCC+ = 5 V, VCC– = 0 V, VIC = 2 V, VO = 2.5 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xxI
PARAMETER
TEST CONDITIONS
TA
UNIT
MIN
TYP
MAX
25°C
1
3.5
5.5
VIO
αVIO
IIB
Input offset voltage
mV
µV/°C
nA
–40°C to 125°C
Average temperature coefficient
of input offset voltage
25°C
1
25°C
–40°C to 125°C
25°C
40
100
150
30
Input bias current
Input offset current
0.5
90
IIO
nA
dB
dB
–40°C to 125°C
25°C
50
72
70
CMRR Common-mode rejection ratio
VIC = 0 to 4 V
–40°C to 125°C
25°C
75
85
Positive supply-voltage
+kSVR
VCC+ = 1.7 V to 4 V, VCC– = –1 V,
VO = 0, VIC = 0
rejection ratio
–40°C to 125°C
25°C
70
73
85
Negative supply-voltage
–kSVR
VCC+ = 1.7 V, VCC– = –1 V to –3.3 V,
VO = 0, VIC = 0
dB
V
rejection ratio
–40°C to 125°C
70
Common-mode input
voltage range
–0.2
–0.3
to 4.2 to 4.3
VICR
CMRR ≥ 50 dB
25°C
25°C
–40°C to 125°C
25°C
95
90
105
105
105
105
4.84
0.17
4.9
0.1
45
RL = 600 Ω to 2.5 V,
Sourcing
VO = 2.5 V to 4.5 V
95
RL = 600 Ω to 2.5 V,
Sinking
VO = 2.5 V to 0.5 V
–40°C to 125°C
25°C
90
Large-signal voltage
amplification
AV
dB
95
RL = 2 kΩ to 2.5 V,
Sourcing
VO = 2.5 V to 4.5 V
–40°C to 125°C
25°C
90
95
RL = 2 kΩ to 2.5 V,
Sinking
VO = 2.5 V to 0.5 V
–40°C to 125°C
25°C
90
4.75
4.6
High level
VCC+ = 5 V,
–40°C to 125°C
25°C
RL = 600 Ω to 2.5 V
0.25
0.3
Low level
–40°C to 125°C
25°C
VO
Output swing
V
4.85
4.8
High level
VCC+ = 5 V,
–40°C to 125°C
25°C
RL = 2 kΩ to 2.5 V
0.15
0.2
Low level
–40°C to 125°C
25°C
20
15
20
15
VO = 0 V
Sourcing
Sinking
–40°C to 125°C
25°C
IO
Output current
Supply current
mA
mA
40
VO = 5 V
–40°C to 125°C
25°C
0.3
0.5
1
0.4
0.6
0.7
0.9
1.3
1.5
LMV821
–40°C to 125°C
25°C
ICC
LMV822 (both amplifiers)
–40°C to 125°C
25°C
LMV824 (all four amplifiers)
–40°C to 125°C
12
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
LMV8xxI 5-V Electrical Characteristics (continued)
VCC+ = 5 V, VCC– = 0 V, VIC = 2 V, VO = 2.5 V, and RL > 1 MΩ (unless otherwise noted)
LMV8xxI
TYP
1.9
PARAMETER
TEST CONDITIONS
VCC+ = 5 V(1)
TA
UNIT
MIN
MAX
SR
Slew rate
25°C
25°C
25°C
25°C
25°C
25°C
25°C
1.4
V/µs
MHz
deg
(2)
(2)
(2)
GBW Gain bandwidth product
5.5
Φm
Phase margin
64.2
8.7
Gain margin
dB
Amplifier-to-amplifier isolation
Equivalent input noise voltage
Equivalent input noise current
VCC+ = 5 V, RL = 100 kΩ to 2.5 V(3)
f = 1 kHz, VIC = 1 V
f = 1 kHz
135
42
dB
Vn
In
nV/√Hz
pA/√Hz
0.2
f = 1 kHz, AV = –2, RL = 10 kΩ,
VO = 4.1 Vp-p
THD
Total harmonic distortion
25°C
0.01
%
(1) Connected as voltage follower with 3-V step input. Value specified is the slower of the positive and negative slew rates.
(2) 40-dB closed-loop dc gain, CL = 22 pF
(3) Each amplifier excited in turn with 1 kHz to produce VO = 3 Vp-p
13
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
INPUT CURRENT
vs
TEMPERATURE
1200
1000
800
−30
LMV824
All Channels
V
V
= 5 V
CC+
T
= 85+C
= 25+C
A
= V
/2
in
CC+
−40
−50
−60
−70
T
A
600
400
200
T
A
= −40+C
0
−40
−20
0
20
40
60
80
100
0
1
2
3
4
5
6
T
A
− Temperature − °C
V
CC+
− Supply Voltage − V
Figure 1.
Figure 2.
SOURCING CURRENT
vs
OUTPUT VOLTAGE
SOURCING CURRENT
vs
OUTPUT VOLTAGE
100
100
V
CC+
= 2.7 V
V
CC+
= 5 V
10
1
10
1
0.1
0.1
0.01
0.01
0.001
0.01
0.1
1
10
0.001
0.01
0.1
1
10
Output Voltage Referenced to V+ − (V)
Output Voltage Referenced to V+ − (V)
Figure 3.
Figure 4.
14
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
SINKING CURRENT
vs
OUTPUT VOLTAGE
SINKING CURRENT
vs
OUTPUT VOLTAGE
100
100
10
V
CC+
= 2.7 V
V
CC+
= 5 V
10
1
1
0.1
0.01
0.1
0.01
0.1
0.01
1
10
0.1
0.01
1
10
Output Voltage Referenced to GND − V
Output Voltage Referenced to GND − V
Figure 5.
Figure 6.
OUTPUT VOLTAGE SWING
vs
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
SUPPLY VOLTAGE
50
40
80
70
60
R
L
= 10 kΩ to Mid Rail
R
L
= 2 kΩ to Mid Rail
Negative Swing
Positive Swing
50
40
30
30
20
Negative Swing
Positive Swing
20
10
0
10
0
2.6
3
3.4
3.8
4.2
4.6
5
2.6
3
3.4
3.8
4.2
4.6
5
V
CC+
− Supply Voltage − V
V
CC+
− Supply Voltage − V
Figure 7.
Figure 8.
15
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
OUTPUT VOLTAGE SWING
vs
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
LOAD RESISTANCE
160
150
140
130
120
160
140
R
L
= 600 Ω to Mid Rail
R
= 5 kΩ to Mid Rail
= 5 V
lL
V
CC+
Negative Swing
Positive Swing
120
100
80
60
40
20
110
100
90
80
70
0
60
2.6
100
1000
10k
100k
3
3.4
3.8
4.2
4.6
5
Resistive Load − Ω
V
CC+
− Supply Voltage − V
Figure 9.
Figure 10.
CROSSTALK REJECTION
+PSRR
vs
FREQUENCY
vs
FREQUENCY
100
160
V
CC
= +2.5 V
+
90
150
80
70
60
50
40
30
20
140
130
V
CC
= +1.35 V
+
120
110
100
90
V
= ±2.5 V
CC+
V = 3 V
I
PP
= 5 kΩ
= 1
R
A
V
L
10
0
1k
10k
100k
1M
100
100
1k
Frequency − Hz
10k
100k
Frequency − Hz
Figure 11.
Figure 12.
16
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
–PSRR
vs
FREQUENCY
100
90
V
CC
= +2.5 V
+
80
70
60
V
CC
= +1.35 V
+
50
40
30
20
10
0
100
1k
10k
100k
1M
Frequency − Hz
Figure 13.
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 2.7 V, RL = 600 Ω, 2 kΩ, 100 kΩ)
80
70
60
140
120
Phase
100
80
50
40
60
40
30
Gain
20
20
0
10
V
CC+
= 2.7 V
600 Ω
2 kΩ
−20
0
−40
−60
−10
−20
100 kΩ
1k
10k
100k
1M
10M
Frequency − Hz
Figure 14.
17
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 5 V, RL = 600 Ω, 2 kΩ, 100 kΩ)
140
120
100
80
80
70
60
Phase
50
40
60
40
30
20
10
20
Gain
0
−20
V
CC+
= 5 V
600 Ω
2 kΩ
0
−10
−20
−40
−60
100 kΩ
1M
1k
10k
10M
100k
Frequency − Hz
Figure 15.
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 2.7 V, RL = 10 kΩ, CL = 22 pF, 100 pF, 200 pF)
80
70
100
80
60
Phase
60
50
40
30
20
10
40
20
0
−20
−40
−60
Gain
V
R
= 2.7 V
= 10 kΩ
22 pF
100 pF
200 pF
CC+
L
0
−10
−20
−80
−100
1k
10k
100k
1M
10M
Frequency − Hz
Figure 16.
18
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 5 V, RL = 10 kΩ, CL = 22 pF, 100 pF, 200 pF)
80
100
80
70
60
50
40
Phase
60
40
20
0
30
20
10
0
Gain
−20
−40
V
R
= 5 V
= 10 kΩ
22 pF
CC+
L
−60
100 pF
200 pF
−80
−10
−20
−100
10M
1k
10k
100k
1M
Frequency − Hz
Figure 17.
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 2.7 V, RL = 600 Ω, CL = 22 pF, 100 pF, 200 pF)
140
120
100
80
70
60
50
Phase
80
40
30
20
60
40
20
Gain
V
R
= 2.7 V
= 600 Ω
CC+
10
0
0
L
−20
−40
22 pF
100 pF
200 pF
−10
−20
−60
1k
10k
100k
Frequency − Hz
Figure 18.
1M
10M
19
LMV821 SINGLE, LMV822 DUAL, LMV824 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS
www.ti.com
SLOS434G–FEBRUARY 2004–REVISED AUGUST 2005
TYPICAL CHARACTERISTICS (continued)
TA = 25°C, VCC+ = 5-V Single Supply (Unless Otherwise Noted)
GAIN AND PHASE MARGIN
vs
FREQUENCY
(VCC+ = 5 V, RL = 600 Ω, CL = 22 pF, 100 pF, 200 pF)
140
120
80
70
Phase
60
100
80
60
40
20
0
50
40
30
20
Gain
10
0
V
R
= 5 V
= 600 Ω
CC+
L
−20
22 pF
100 pF
200 pF
−10
−20
−40
−60
1k
10k
100k
1M
10M
Frequency − Hz
Figure 19.
20
PACKAGE OPTION ADDENDUM
www.ti.com
26-Oct-2005
PACKAGING INFORMATION
Orderable Device
LMV821DBVR
LMV821DBVRE4
LMV821DBVT
LMV821DBVTE4
LMV821DCKR
LMV821DCKRE4
LMV821DCKT
LMV821DCKTE4
LMV821IDBVR
LMV821IDBVRE4
LMV821IDBVT
LMV821IDBVTE4
LMV821IDCKR
LMV821IDCKRE4
LMV821IDCKT
LMV821IDCKTE4
LMV822D
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOT-23
DBV
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
8
8
8
8
8
8
8
8
8
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOT-23
SOT-23
SOT-23
SC70
DBV
DBV
DBV
DCK
DCK
DCK
DCK
DBV
DBV
DBV
DBV
DCK
DCK
DCK
DCK
D
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOT-23
SOT-23
SOT-23
SOT-23
SC70
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
3000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SC70
250 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV822DE4
SOIC
D
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV822DGKR
LMV822DR
MSOP
SOIC
DGK
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV822DRE4
LMV822ID
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV822IDE4
SOIC
D
75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV822IDGKR
LMV822IDR
MSOP
SOIC
DGK
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
26-Oct-2005
Orderable Device
LMV822IDRE4
LMV824D
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
8
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
SOIC
D
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824DE4
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824DGVR
LMV824DGVRE4
LMV824DR
TVSOP
TVSOP
SOIC
DGV
DGV
D
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824DRE4
LMV824ID
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824IDE4
LMV824IDGVR
LMV824IDGVRE4
LMV824IDR
SOIC
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TVSOP
TVSOP
SOIC
DGV
DGV
D
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824IDRE4
LMV824IPW
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
PW
PW
PW
PW
PW
PW
PW
PW
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824IPWE4
LMV824IPWR
LMV824IPWRE4
LMV824PW
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LMV824PWE4
LMV824PWR
LMV824PWRE4
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan
-
The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS
&
no Sb/Br)
-
please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
26-Oct-2005
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 3
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明