LP2992AIM5X-3.3/NOPB [TI]
LP2992 Micropower 250 mA Low-Noise Ultra Low-Dropout Regulator in SOT-23 and WSON Packages Designed for Use with Very Low ESR Output Capacitors;
| 型号： | LP2992AIM5X-3.3/NOPB |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | LP2992 Micropower 250 mA Low-Noise Ultra Low-Dropout Regulator in SOT-23 and WSON Packages Designed for Use with Very Low ESR Output Capacitors 光电二极管 输出元件 调节器 |
| 文件： | 总28页 (文件大小：1907K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
LP2992 Micropower 250 mA Low-Noise Ultra Low-Dropout Regulator in SOT-23 and
WSON Packages Designed for Use with Very Low ESR Output Capacitors
Check for Samples: LP2992
1
FEATURES
DESCRIPTION
The LP2992 is a 250 mA, fixed-output voltage
regulator designed to provide ultra low-dropout and
low noise in battery powered applications.
2
•
Ultra Low Dropout Voltage
•
•
Specified 250 mA Output Current
Smallest Possible Size (SOT-23, WSON
Package)
Using an optimized VIP (Vertically Integrated PNP)
process, the LP2992 delivers unequaled performance
in all specifications critical to battery-powered
designs:
•
•
•
•
•
•
•
•
•
•
•
Requires Minimum External Components
Stable with Low-ESR Output Capacitor
<1 µA Quiescent Current when Shut Down
Low Ground Pin Current at all Loads
Output Voltage Accuracy 1% (A Grade)
High Peak Current Capability
Dropout Voltage: Typically 450 mV @ 250 mA load,
and 5 mV @ 1 mA load.
Ground Pin Current: Typically 1500 µA @ 250 mA
load, and 75 µA @ 1 mA load.
Wide Supply Voltage Range (16V Max)
Low ZOUT: 0.3Ω Typical (10 Hz to 1 MHz)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range
Custom Voltages Available
Enhanced Stability: The LP2992 is stable with
output capacitor ESR as low as 5 mΩ, which allows
the use of ceramic capacitors on the output.
Sleep Mode: Less than 1 µA quiescent current when
ON/OFF pin is pulled low.
Smallest Possible Size: SOT-23 and WSON
packages use absolute minimum board space.
APPLICATIONS
Precision Output: 1% tolerance output voltages
available (A grade).
•
•
•
•
Cellular Phone
Palmtop/Laptop Computer
Personal Digital Assistant (PDA)
Camcorder, Personal Stereo, Camera
Low Noise: By adding a 10 nF bypass capacitor,
output noise can be reduced to 30 µV (typical).
Multiple voltage options, from 1.5V to 5.0V, are
available as standard products. Consult factory for
custom voltages.
Block Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2013, Texas Instruments Incorporated
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Basic Application Circuit
*ON/OFF input must be actively terminated. Tie to VIN if this function is not to be used.
**Minimum capacitance is shown to ensure stability (may be increased without limit). Ceramic capacitor required for
output (see Application Hints).
***Reduces output noise (may be omitted if application is not noise critical). Use ceramic or film type with very low
leakage current (see Application Hints).
Connection Diagram
Figure 1. Top View
5-Lead SOT-23 (DBV)
See Package Number DBV0005A
Figure 2. Top View
6-Lead WSON Package (NGD)
See Package Number NGD0006A
2
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
Storage Temperature Range
−65°C to +150°C
−40°C to +125°C
260°C
Operating Junction Temperature Range
Lead Temp. (Soldering, 5 sec.)
(3)
ESD Rating
2 kV
(4)
Power Dissipation
Internally Limited
−0.3V to +16V
2.2V to +16V
Input Supply Voltage (Survival)
Input Supply Voltage (Operating)
Shutdown Input Voltage (Survival)
−0.3V to +16V
−0.3V to +9V
(5)
Output Voltage (Survival,
IOUT (Survival)
)
Short Circuit Protected
−0.3V to +16V
(6)
Input-Output Voltage (Survival,
)
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the component may occur. Electrical specifications do not apply
when operating the device outside of its rated operating conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) The ESD rating of pins 3 and 4 for the SOT-23 package, or pins 1 and 3 for the WSON package, is 1 kV.
(4) The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-to-ambient thermal
resistance, θJ-A, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperture is calculated
using:
Where the value of θJ-A for the SOT-23 package is 220°C/W in a typical PC board mounting and the WSON package is 65°C/W.
Exceeding the maximum allowable dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown.
(5) If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2992 output must be diode-clamped to
ground.
(6) The output PNP structure contains a diode between the VIN to VOUT terminals that is normally reverse-biased. Reversing the polarity
from VIN to VOUT will turn on this diode.
Electrical Characteristics
Limits in standard typeface are for TJ = 25°C. and limits in boldface type apply over the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, CIN = 1 µF, COUT = 4.7 µF, VON/OFF = 2V.
LP2992AI-X.X
LP2992I-X.X
(1)
(1)
Symbol
Parameter
Conditions
Typ
Units
Min
−1.0
−1.5
−2.5
−3.5
−4.5
Max
1.0
Min
Max
ΔVO
Output Voltage
Tolerance
IL = 1 mA
−1.5
−2.5
−3.5
−4.0
−5.0
1.5
2.5
1 mA ≤ IL ≤ 50 mA
1.5
2.5
3.5
%VNOM
1 mA ≤ IL ≤ 250 mA
VO(NOM)+1V ≤ VIN ≤ 16V
3.5
4.0
4.5
5.0
ΔVO/ΔVIN
Output Voltage
Line Regulation
0.007
2.05
0.014
0.032
2.20
0.014
0.032
2.20
%/V
V
VIN(min)
Minimum input voltage
required to maintain
output regulation
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are specified through correlation using
Statistical Quality Control (SQC) methods. The limits are used to calculate TI's Average Outgoing Quality Level (AOQL).
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Electrical Characteristics (continued)
Limits in standard typeface are for TJ = 25°C. and limits in boldface type apply over the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, CIN = 1 µF, COUT = 4.7 µF, VON/OFF = 2V.
LP2992AI-X.X
LP2992I-X.X
(1)
(1)
Symbol
Parameter
Conditions
Typ
0.5
5
Units
Min
Max
2.5
Min
Max
VIN–VO
Dropout Voltage
IL = 0
2.5
4
(2)
4
IL = 1 mA
9
9
12
12
IL = 50 mA
IL = 150 mA
IL = 250 mA
IL = 0
100
260
450
65
125
180
325
470
575
850
95
125
180
325
470
575
850
95
mV
IGND
Ground Pin Current
125
110
170
600
1000
1500
2500
2300
4000
0.8
125
110
170
600
1000
1500
2500
2300
4000
0.8
IL = 1 mA
75
IL = 50 mA
IL = 150 mA
IL = 250 mA
350
850
1500
µA
VON/OFF < 0.3V
0.01
0.05
1.4
VON/OFF < 0.15V
High = O/P ON
Low = O/P OFF
VON/OFF = 0
2
2
VON/OFF
ION/OFF
en
ON/OFF Input Voltage
1.6
1.6
(3)
V
0.55
0.01
5
0.15
−2
0.15
−2
ON/OFF Input Current
µA
VON/OFF = 5V
15
15
Output Noise
BW = 300 Hz to 50 kHz,
COUT = 10 µF
Voltage (RMS)
30
45
µV
dB
CBYPASS = 10 nF
f = 1 kHz, CBYPASS = 10 nF
COUT = 10 µF
ΔVOUT/ΔVIN
IO(SC)
Ripple Rejection
Short Circuit Current
Peak Output Current
RL = 0 (Steady State)
(4)
400
350
mA
mA
IO(PK)
VOUT ≥ Vo(NOM) −5%
(2) VIN must be the greater of 2.2V or VOUT(nom) + Dropout Voltage to maintain output regulation. Dropout voltage is defined as the input to
output differential at which the output voltage drops 2% below the value measured with a 1V differential.
(3) The ON/OFF input must be properly driven to prevent possible misoperation. For details, refer to Application Hints.
(4) The LP2992 has foldback current limiting which allows a high peak current when VOUT > 0.5V, and then reduces the maximum output
current as VOUT is forced to ground (see Typical Performance Characteristics curves).
4
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
Typical Performance Characteristics
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
VOUT
vs
Temperature
Short-Circuit Current
Figure 3.
Figure 4.
Short Circuit Current
vs
Short-Circuit Current
Output Voltage
Figure 5.
Figure 6.
Ripple Rejection
Ripple Rejection
Figure 7.
Figure 8.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Ripple Rejection
Ripple Rejection
Figure 9.
Figure 10.
Ripple Rejection
Ripple Rejection
Figure 11.
Figure 12.
Ripple Rejection
Ripple Rejection
Figure 13.
Figure 14.
6
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
Typical Performance Characteristics (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Output Impedance
vs
Ripple Rejection
Frequency
Figure 15.
Figure 16.
Output Impedance
vs
Frequency
Output Noise Density
Figure 17.
Figure 18.
GND Pin
vs
Load Current
Output Noise Density
Figure 19.
Figure 20.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Dropout Voltage
vs
Temperature
Input Current
vs
Pin
Figure 21.
Figure 22.
Ignd
vs
Load and Temperature
Instantaneous Short Circuit Current
Figure 23.
Figure 24.
Load Transient Response
Load Transient Response
Figure 25.
Figure 26.
8
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
Typical Performance Characteristics (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Load Transient Response
Line Transient Response
Figure 27.
Figure 28.
Line Transient Response
Line Transient Response
Figure 29.
Figure 30.
Line Transient Response
Turn-On Time
Figure 31.
Figure 32.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
Unless otherwise specified: CIN = 1µF, COUT = 4.7µF, VIN = VOUT(NOM) +1, TA = 25°C, ON/OFF pin is tied to VIN.
Turn-On Time
Turn-On Time
Figure 33.
Figure 34.
Turn-On Time
Figure 35.
10
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
APPLICATION HINTS
EXTERNAL CAPACITORS
Like any low-dropout regulator, the LP2992 requires external capacitors for regulator stability. These capacitors
must be correctly selected for good performance.
Input Capacitor
An input capacitor whose capacitance is ≥ 1 µF is required between the LP2992 input and ground (the amount of
capacitance may be increased without limit).
This capacitor must be located a distance of not more than 1 cm from the input pin and returned to a clean
analog ground. Any good quality ceramic, tantalum, or film capacitor may be used at the input.
Important: Tantalum capacitors can suffer catastrophic failure due to surge current when connected to a low-
impedance source of power (like a battery or very large capacitor). If a Tantalum capacitor is used at the input, it
must be specified by the manufacturer to have a surge current rating sufficient for the application.
There are no requirements for ESR on the input capacitor, but tolerance and temperature coefficient must be
considered when selecting the capacitor to ensure the capacitance will be ≥ 1 µF over the entire operating
temperature range.
Output Capacitor:
The LP2992 is designed specifically to work with ceramic output capacitors, utilizing circuitry which allows the
regulator to be stable across the entire range of output current with an output capacitor whose ESR is as low as
5 mΩ. It may also be possible to use Tantalum or film capacitors at the output, but these are not as attractive for
reasons of size and cost (see next section, CAPACITOR CHARACTERISTICS).
The output capacitor must meet the requirement for minimum amount of capacitance and also have an ESR
(equivalent series resistance) value which is within the stable range. Curves are provided which show the stable
ESR range as a function of load current (see ESR graph below).
Important: The output capacitor must maintain its ESR within the stable region over the full operating
temperature range of the application to assure stability.
The LP2992 requires a minimum of 4.7 µF on the output (output capacitor size can be increased without limit).
It is important to remember that capacitor tolerance and variation with temperature must be taken into
consideration when selecting an output capacitor so that the minimum required amount of output capacitance is
provided over the full operating temperature range. It should be noted that ceramic capacitors can exhibit large
changes in capacitance with temperature (see next section, CAPACITOR CHARACTERISTICS).
The output capacitor must be located not more than 1 cm from the output pin and returned to a clean analog
ground.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
Noise Bypass Capacitor:
Connecting a 10 nF capacitor to the Bypass pin significantly reduces noise on the regulator output. It should be
noted that the capacitor is connected directly to a high-impedance circuit in the bandgap reference.
Because this circuit has only a few microamperes flowing in it, any significant loading on this node will cause a
change in the regulated output voltage. For this reason, DC leakage current through the noise bypass capacitor
must never exceed 100 nA, and should be kept as low as possible for best output voltage accuracy.
The types of capacitors best suited for the noise bypass capacitor are ceramic and film. High-quality ceramic
capacitors with either NPO or COG dielectric typically have very low leakage. 10 nF polypropolene and
polycarbonate film capacitors are available in small surface-mount packages and typically have extremely low
leakage current.
CAPACITOR CHARACTERISTICS
The LP2992 was designed to work with ceramic capacitors on the output to take advantage of the benefits they
offer: for capacitance values in the 2.2 µF to 10 µF range, ceramics are the least expensive and also have the
lowest ESR values (which makes them best for eliminating high-frequency noise). The ESR of a typical 4.7 µF
ceramic capacitor is in the range of 5 mΩ to 10 mΩ, which easily meets the ESR limits required for stability by
the LP2992.
One disadvantage of ceramic capacitors is that their capacitance can vary with temperature. Most large value
ceramic capacitors (≥ 2.2 µF) are manufactured with the Z5U or Y5V temperature characteristic, which results in
the capacitance dropping by more than 50% as the temperature goes from 25°C to 85°C.
This could cause problems if a 4.7 µF capacitor were used on the output since it will drop down to approximately
2.3 µF at high ambient temperatures (which could cause the LP2992 to oscillate). If Z5U or Y5V capacitors are
used on the output, a minimum capacitance value of 10 µF must be observed.
A better choice for temperature coefficient in ceramic capacitors is X7R, which holds the capacitance within
±15%. Unfortunately, the larger values of capacitance are not offered by all manufacturers in the X7R dielectric.
Tantalum:
Tantalum capacitors are less desirable than ceramics for use as output capacitors because they are more
expensive when comparing equivalent capacitance and voltage ratings in the 1 µF to 4.7 µF range.
Another important consideration is that Tantalum capacitors have higher ESR values than equivalent size
ceramics. This means that while it may be possible to find a Tantalum capacitor with an ESR value within the
stable range, it would have to be larger in capacitance (which means bigger and more costly) than a ceramic
capacitor with the same ESR value.
It should also be noted that the ESR of a typical Tantalum will increase about 2:1 as the temperature goes from
25°C down to −40°C, so some guard band must be allowed.
ON/OFF INPUT OPERATION
The LP2992 is shut off by driving the ON/OFF input low, and turned on by pulling it high. If this feature is not to
be used, the ON/OFF input should be tied to VIN to keep the regulator output on at all times.
To assure proper operation, the signal source used to drive the ON/OFF input must be able to swing above and
below the specified turn-on/turn-off voltage thresholds listed in the Electrical Characteristics section under
VON/OFF. To prevent mis-operation, the turn-on (and turn-off) voltage signals applied to the ON/OFF input must
have a slew rate which is ≥ 40 mV/µs.
CAUTION
The regulator output voltage can not be ensured if a slow-moving AC (or DC) signal is
applied that is in the range between the specified turn-on and turn-off voltages listed
under the electrical specification VON/OFF (see Electrical Characteristics).
12
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
LP2992
www.ti.com
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
REVERSE INPUT-OUTPUT VOLTAGE
The PNP power transistor used as the pass element in the LP2992 has an inherent diode connected between
the regulator output and input. During normal operation (where the input voltage is higher than the output) this
diode is reverse-biased.
However, if the output is pulled above the input, this diode will turn ON and current will flow into the regulator
output. In such cases, a parasitic SCR can latch which will allow a high current to flow into VIN (and out the
ground pin), which can damage the part.
In any application where the output may be pulled above the input, an external Schottky diode must be
connected from VIN to VOUT (cathode on VIN, anode on VOUT), to limit the reverse voltage across the LP2992 to
0.3V (see Absolute Maximum Ratings).
WSON MOUNTING
The WSON package requires specific mounting techniques which are detailed in Application Note # 1187
(literature number SNOA401). Referring to the section PCB Design Recommendations, it should be noted that
the pad style which should be used with the WSON package is the NSMD (non-solder mask defined) type.
The thermal dissipation of the WSON package is directly related to the printed circuit board construction and the
amount of additional copper area.
For the LP2992 in the NGD0006A 6-Lead WSON package, the junction-to-case thermal rating, θJC, is 19°C/W,
where the case is actually the bottom of the package at the center of the DAP. The junction-to-ambient thermal
performance for the LP2992 in the NGD0006A 6-Lead WSON package, using the JEDEC standards is
summarized in the following table:
Board
Type
Thermal
Vias
θJC
θJA
JEDEC
2–Layer
None
19°C/W
282°C/W
1
2
4
6
19°C/W
19°C/W
19°C/W
19°C/W
94°C/W
78°C/W
66°C/W
62°C/W
JEDEC
4–Layer
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: LP2992
LP2992
SNVS171G –NOVEMBER 2001–REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision F (March 2013) to Revision G
Page
•
Changed layout of National Data Sheet to TI format .......................................................................................................... 13
14
Submit Documentation Feedback
Copyright © 2001–2013, Texas Instruments Incorporated
Product Folder Links: LP2992
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LP2992AILD-1.5
ACTIVE
WSON
WSON
NGD
6
6
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L011A
LP2992AILD-1.5/NOPB
ACTIVE
NGD
1000
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
L011A
LP2992AILD-1.8
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L012A
L012A
LP2992AILD-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AILD-3.3
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L014A
L014A
LP2992AILD-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AILD-5.0
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L015A
L015A
LP2992AILD-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AILDX-1.8
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
4500
4500
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L012A
L012A
LP2992AILDX-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AILDX-3.3
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
4500
4500
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L014A
L014A
LP2992AILDX-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AILDX-5.0
ACTIVE
ACTIVE
WSON
WSON
NGD
NGD
6
6
4500
4500
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
L015A
L015A
LP2992AILDX-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
LP2992AIM5-1.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFBA
LFBA
LP2992AIM5-1.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5-1.8
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFCA
LFCA
LP2992AIM5-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5-2.5
ACTIVE
SOT-23
DBV
5
1000
TBD
Call TI
Call TI
-40 to 125
LFDA
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LP2992AIM5-2.5/NOPB
ACTIVE
SOT-23
DBV
5
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
-40 to 125
LFDA
LP2992AIM5-3.3
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFEA
LFEA
LP2992AIM5-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5-5.0
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFFA
LFFA
LP2992AIM5-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5X-1.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFBA
LFBA
LP2992AIM5X-1.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5X-1.8
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFCA
LFCA
LP2992AIM5X-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5X-2.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFDA
LFDA
LP2992AIM5X-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5X-3.3
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFEA
LFEA
LP2992AIM5X-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992AIM5X-5.0
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFFA
LFFA
LP2992AIM5X-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992ILD-1.8
LP2992ILD-1.8/NOPB
LP2992ILD-2.5
ACTIVE
ACTIVE
ACTIVE
ACTIVE
WSON
WSON
WSON
WSON
NGD
NGD
NGD
NGD
6
6
6
6
1000
1000
1000
1000
TBD
Call TI
CU SN
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
-40 to 125
-40 to 125
L012A
B
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
Call TI
L012A
B
TBD
L013A
B
LP2992ILD-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
L013A
B
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LP2992ILD-3.3
LP2992ILD-3.3/NOPB
LP2992ILD-5.0
ACTIVE
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
NGD
6
6
6
6
6
6
6
6
6
6
6
6
1000
TBD
Call TI
CU SN
Call TI
CU SN
Call TI
CU SN
Call TI
CU SN
Call TI
CU SN
Call TI
CU SN
Call TI
Level-3-260C-168 HR
Call TI
L014A
B
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
1000
1000
1000
4500
4500
4500
4500
4500
4500
4500
4500
Green (RoHS
& no Sb/Br)
L014A
B
TBD
L015A
B
LP2992ILD-5.0/NOPB
LP2992ILDX-1.5
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
Call TI
L015A
B
TBD
L011A
B
LP2992ILDX-1.5/NOPB
LP2992ILDX-1.8
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
Call TI
L011A
B
TBD
L012A
B
LP2992ILDX-1.8/NOPB
LP2992ILDX-3.3
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
Call TI
L012A
B
TBD
L014A
B
LP2992ILDX-3.3/NOPB
LP2992ILDX-5.0
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
Call TI
L014A
B
TBD
L015A
B
LP2992ILDX-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-3-260C-168 HR
L015A
B
LP2992IM5-1.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFBB
LP2992IM5-1.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LFBB
LP2992IM5-1.8
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFCB
LFCB
LP2992IM5-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5-2.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFDB
LFDB
LP2992IM5-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LP2992IM5-3.0
ACTIVE
SOT-23
SOT-23
DBV
5
5
1000
TBD
Call TI
CU SN
Call TI
LF8B
LP2992IM5-3.0/NOPB
ACTIVE
DBV
1000
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LF8B
LP2992IM5-3.3
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFEB
LFEB
LP2992IM5-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5-5.0
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFFB
LFFB
LP2992IM5-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5X-1.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFBB
LFBB
LP2992IM5X-1.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5X-1.8
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFCB
LFCB
LP2992IM5X-1.8/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5X-2.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFDB
LFDB
LP2992IM5X-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5X-3.3
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFEB
LFEB
LP2992IM5X-3.3/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LP2992IM5X-5.0
ACTIVE
ACTIVE
SOT-23
SOT-23
DBV
DBV
5
5
3000
3000
TBD
Call TI
CU SN
Call TI
-40 to 125
-40 to 125
LFFB
LFFB
LP2992IM5X-5.0/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LP2992AILD-1.5
LP2992AILD-1.5/NOPB
LP2992AILD-1.8
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
DBV
DBV
DBV
DBV
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
1000
1000
1000
1000
1000
1000
1000
1000
4500
4500
4500
4500
4500
4500
1000
1000
1000
1000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
330.0
330.0
330.0
330.0
330.0
330.0
178.0
178.0
178.0
178.0
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
8.4
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.4
1.4
1.4
1.4
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
4.0
4.0
4.0
4.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
8.0
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q3
Q3
Q3
Q3
LP2992AILD-1.8/NOPB
LP2992AILD-3.3
LP2992AILD-3.3/NOPB
LP2992AILD-5.0
LP2992AILD-5.0/NOPB
LP2992AILDX-1.8
LP2992AILDX-1.8/NOPB WSON
LP2992AILDX-3.3 WSON
LP2992AILDX-3.3/NOPB WSON
LP2992AILDX-5.0 WSON
LP2992AILDX-5.0/NOPB WSON
LP2992AIM5-1.5 SOT-23
LP2992AIM5-1.5/NOPB SOT-23
LP2992AIM5-1.8 SOT-23
LP2992AIM5-1.8/NOPB SOT-23
8.4
8.0
8.4
8.0
8.4
8.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LP2992AIM5-2.5
LP2992AIM5-2.5/NOPB SOT-23
LP2992AIM5-3.3 SOT-23
LP2992AIM5-3.3/NOPB SOT-23
LP2992AIM5-5.0 SOT-23
LP2992AIM5-5.0/NOPB SOT-23
LP2992AIM5X-1.5 SOT-23
LP2992AIM5X-1.5/NOPB SOT-23
LP2992AIM5X-1.8 SOT-23
LP2992AIM5X-1.8/NOPB SOT-23
LP2992AIM5X-2.5 SOT-23
LP2992AIM5X-2.5/NOPB SOT-23
LP2992AIM5X-3.3 SOT-23
LP2992AIM5X-3.3/NOPB SOT-23
LP2992AIM5X-5.0 SOT-23
LP2992AIM5X-5.0/NOPB SOT-23
SOT-23
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
4500
4500
4500
4500
4500
4500
4500
4500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
8.4
8.0
LP2992ILD-1.8
LP2992ILD-1.8/NOPB
LP2992ILD-2.5
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
12.4
8.4
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
12.0
8.0
LP2992ILD-2.5/NOPB
LP2992ILD-3.3
LP2992ILD-3.3/NOPB
LP2992ILD-5.0
LP2992ILD-5.0/NOPB
LP2992ILDX-1.5
LP2992ILDX-1.5/NOPB
LP2992ILDX-1.8
LP2992ILDX-1.8/NOPB
LP2992ILDX-3.3
LP2992ILDX-3.3/NOPB
LP2992ILDX-5.0
LP2992ILDX-5.0/NOPB
LP2992IM5-1.5
LP2992IM5-1.5/NOPB
LP2992IM5-1.8
8.4
8.0
8.4
8.0
LP2992IM5-1.8/NOPB
LP2992IM5-2.5
8.4
8.0
8.4
8.0
LP2992IM5-2.5/NOPB
LP2992IM5-3.0
8.4
8.0
8.4
8.0
LP2992IM5-3.0/NOPB
LP2992IM5-3.3
8.4
8.0
8.4
8.0
LP2992IM5-3.3/NOPB
LP2992IM5-5.0
8.4
8.0
8.4
8.0
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LP2992IM5-5.0/NOPB
LP2992IM5X-1.5
SOT-23
SOT-23
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
5
5
5
5
5
5
5
5
5
5
5
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
LP2992IM5X-1.5/NOPB SOT-23
LP2992IM5X-1.8 SOT-23
LP2992IM5X-1.8/NOPB SOT-23
LP2992IM5X-2.5 SOT-23
LP2992IM5X-2.5/NOPB SOT-23
LP2992IM5X-3.3 SOT-23
LP2992IM5X-3.3/NOPB SOT-23
LP2992IM5X-5.0 SOT-23
LP2992IM5X-5.0/NOPB SOT-23
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LP2992AILD-1.5
LP2992AILD-1.5/NOPB
LP2992AILD-1.8
WSON
WSON
WSON
WSON
WSON
WSON
NGD
NGD
NGD
NGD
NGD
NGD
6
6
6
6
6
6
1000
1000
1000
1000
1000
1000
210.0
213.0
210.0
213.0
210.0
213.0
185.0
191.0
185.0
191.0
185.0
191.0
35.0
55.0
35.0
55.0
35.0
55.0
LP2992AILD-1.8/NOPB
LP2992AILD-3.3
LP2992AILD-3.3/NOPB
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LP2992AILD-5.0
LP2992AILD-5.0/NOPB
LP2992AILDX-1.8
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
WSON
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
NGD
6
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1000
1000
4500
4500
4500
4500
4500
4500
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
4500
4500
4500
4500
4500
4500
4500
4500
210.0
213.0
367.0
367.0
367.0
367.0
367.0
367.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
213.0
210.0
213.0
210.0
213.0
210.0
213.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
185.0
191.0
367.0
367.0
367.0
367.0
367.0
367.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
191.0
185.0
191.0
185.0
191.0
185.0
191.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
35.0
55.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
55.0
35.0
55.0
35.0
55.0
35.0
55.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LP2992AILDX-1.8/NOPB
LP2992AILDX-3.3
LP2992AILDX-3.3/NOPB
LP2992AILDX-5.0
LP2992AILDX-5.0/NOPB
LP2992AIM5-1.5
LP2992AIM5-1.5/NOPB
LP2992AIM5-1.8
LP2992AIM5-1.8/NOPB
LP2992AIM5-2.5
LP2992AIM5-2.5/NOPB
LP2992AIM5-3.3
LP2992AIM5-3.3/NOPB
LP2992AIM5-5.0
LP2992AIM5-5.0/NOPB
LP2992AIM5X-1.5
LP2992AIM5X-1.5/NOPB
LP2992AIM5X-1.8
LP2992AIM5X-1.8/NOPB
LP2992AIM5X-2.5
LP2992AIM5X-2.5/NOPB
LP2992AIM5X-3.3
LP2992AIM5X-3.3/NOPB
LP2992AIM5X-5.0
LP2992AIM5X-5.0/NOPB
LP2992ILD-1.8
LP2992ILD-1.8/NOPB
LP2992ILD-2.5
LP2992ILD-2.5/NOPB
LP2992ILD-3.3
LP2992ILD-3.3/NOPB
LP2992ILD-5.0
LP2992ILD-5.0/NOPB
LP2992ILDX-1.5
LP2992ILDX-1.5/NOPB
LP2992ILDX-1.8
LP2992ILDX-1.8/NOPB
LP2992ILDX-3.3
LP2992ILDX-3.3/NOPB
LP2992ILDX-5.0
LP2992ILDX-5.0/NOPB
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Mar-2013
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LP2992IM5-1.5
LP2992IM5-1.5/NOPB
LP2992IM5-1.8
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
DBV
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LP2992IM5-1.8/NOPB
LP2992IM5-2.5
LP2992IM5-2.5/NOPB
LP2992IM5-3.0
LP2992IM5-3.0/NOPB
LP2992IM5-3.3
LP2992IM5-3.3/NOPB
LP2992IM5-5.0
LP2992IM5-5.0/NOPB
LP2992IM5X-1.5
LP2992IM5X-1.5/NOPB
LP2992IM5X-1.8
LP2992IM5X-1.8/NOPB
LP2992IM5X-2.5
LP2992IM5X-2.5/NOPB
LP2992IM5X-3.3
LP2992IM5X-3.3/NOPB
LP2992IM5X-5.0
LP2992IM5X-5.0/NOPB
Pack Materials-Page 5
MECHANICAL DATA
NGD0006A
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明