PT78NR252V [TI]

10-12W Plus to Minus Voltage Integrated Switching Regulator; 10-12W正至负电压集成开关稳压器


型号：	PT78NR252V
厂家：	TEXAS INSTRUMENTS
描述：	10-12W Plus to Minus Voltage Integrated Switching Regulator 10-12W正至负电压集成开关稳压器稳压器开关
文件：	总2页 (文件大小：62K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PT78NR200 Series

10-12W Plus to Minus Voltage

Integrated Switching Regulator

SLTS074A

(Revised 6/30/2000)

•

Negative output from positive input

Wide Input Range

Self-Contained Inductor

Short Circuit Protection

Over-Temperature Protection

Fast Transient Response

tive input voltage greater than 9V.

These easy-to-use, 3-terminal, Inte-

grated Switching Regulators (ISRs)

have maximum output power of 10 to

12 watts and a negative output voltage

that is laser trimmed. They also have

excellent line and load regulation.

The PT78NR200 requires 100

LFM of airflow at its maximum

output current.

The PT78NR200 series creates

negative output voltage from a posi-

Pin-Out Information

Ordering Information

PT78NR2 XX

Pin Function

Standard Application

-V_out

Output Voltage

Package Suffix

GND

52 = -5.2 Volts

06 = -6.0 Volts

12 = -12.0 Volts

15 = -15.0 Volts

H = Horizontal Mount

S = Surface Mount

V = Vertical Mount

Vin

-Vout

COM

PT78NR200

COM

(For dimensions and PC board layout, see

Package Styles 600 and 610.)

C1 = Required 100µF electrolytic

C2 = Required 100µF electrolytic

Pkg Style 600

Specifications

PT78NR200 SERIES

Characteristics

(T_a= 25°C unless noted)

Symbols

Conditions

Min

Typ

Max

Units

Output Current

I_o

Over V_inrange

V_o= -5.2V

0.1*

—

2.0

1.0

V_o= -12.0V

Short Circuit Current

Inrush Current

I_sc

V_in=10V

—

4×I_max

—

Apk

I_ir

t_ir

V_in=10V

—

On start-up

0.5

mSec

Input Voltage Range

V_in

0.1 ≤ I_o≤ I_max

—

Output Voltage Tolerance

∆V_o

Over V_inrange

—

1.0

3.0

%V^o

T_a= 0°C to +70°C

Over V_inrange

0.3 ≤ I_o≤ I_max

Line Regulation

Load Regulation

V_oRipple/Noise

Reg_line

Reg_load

V_n

—

0.5

1.0

—

%V_o

V_in=10V, I_o=I_max

Transient Response

(with 100µF output cap)

t_tr

50% load change

V_oover/undershoot

—

100

5.0

250

—

µSec

%V_o

Efficiency

V_in=9V, I_o=0.5×I_max, V_o=-12V

—

Switching Frequency

ƒ_o

T_a

Over V_inand I_oranges600

650

700

kHz

Absolute Maximum

Operating Temperaturte Range

100 LFM airflow

Over V_inand I_oRanges

—

+85

°C

Recommended Operating

Temperature Range

T_a

100 LFM airflow

Over V_inand I_oRanges

+60**

Thermal Resistance

Storage Temperature

Mechanical Shock

θ_ja

T_s

—

100 LFM airflow

—

°C/W

°C

-40

—

+125

—

Per Mil-STD-883D, Method 2002.3

500

G’s

Mechanical Vibration

Per Mil-STD-883D, Method 2007.2,

20-2000 Hz, soldered in a PC board

—

G’s

Weight

—

Grams

*ISR will operate down to no load with reduced specifications.

**See Thermal Derating chart.

Note: The PT78NR200 series requires a 100µF electrolytic or tantalum output capacitor for proper operation in all applications.

For technical support and more information, see inside back cover or visit www.ti.com/powertrends

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue

any product or service without notice, and advise customers to obtain the latest version of relevant information

to verify, before placing orders, that information being relied on is current and complete. All products are sold

subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those

pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in

accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent

TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily

performed, except those mandated by government requirements.

Customers are responsible for their applications using TI components.

In order to minimize risks associated with the customer’s applications, adequate design and operating

safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent

that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other

intellectual property right of TI covering or relating to any combination, machine, or process in which such

semiconductor products or services might be or are used. TI’s publication of information regarding any third

party’s products or se rvice s doe s not constitute TI’s approval, warranty or e ndorse me nt the re of.

相关型号：