RI-ANT-S01C_17 [TI]
SERIES 2000 STICK ANTENNA;
| 型号： | RI-ANT-S01C_17 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | SERIES 2000 STICK ANTENNA |
| 文件： | 总7页 (文件大小：269K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
www.ti.com
SCBS845A –MARCH 2002–REVISED JULY 2013
SERIES 2000 ANTENNAS
Check for Samples: RI-ANT-G01E, RI-ANT-G02E, RI-ANT-S01C, RI-ANT-S02C
1
FEATURES
DESCRIPTION
These antenna products connect to radio frequency
•
Best in Class Performance Through Patented
HDX Technology
modules (RFM) and reader/writers to form the
interface to the low-frequency (LF) 134.2-kHz Texas
Instruments transponders. In combination with a
reader/writer, they transmit energy and signals to the
transponder and receive the response from the tag.
There are two standard gate antennas and two
standard stick antennas with 1-meter or 3-meter
cable length. Each antenna generates a specific size
and shape of read zone to meet the requirements of
the target application. In general, the gate antennas
generate a large read zone with greater read
distance, while the stick antennas provide a more
focused read zone and an ability to discriminate
between transponders.
•
•
•
•
Protection Class IP 65 and Higher
Four Form Factors Available
Proven in Harsh Industrial Environments
Easy to Install and Use
APPLICATIONS
•
•
•
•
•
Access Control
Vehicle Identification
Container Tracking
Asset Management
Waste Management
The antennas are well suited for use in a broad range
of applications including access control, vehicle
identification, container tracking, asset management,
and waste management applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2013, Texas Instruments Incorporated
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
SCBS845A –MARCH 2002–REVISED JULY 2013
www.ti.com
Gate Antennas – Specifications
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
RI-ANT-G01E
RI-ANT-G02E
–30 to +60
UNIT
°C
Operating Temperature
Storage Temperature
–30 to +60
–40 to +70
–40 to +70
°C
Operating Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
Inductance (typical), at 134.2 kHz
Protection Class
RI-ANT-G01E
RI-ANT-G02E
UNIT
27
27
µH
IP 65
IP 65
Vibration
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
UVSHIPS (UV-Stabilized High Impact Polystyrol)
Case Material
Dimensions
715 ± 5 × 270 ± 3 × 25 ± 1
200 ± 3 × 200 ± 3 × 25 ± 1
mm
g
Weight (typical)
745
1
425
1
Cable Length
m
Connection Terminals
Spade and tongue, stud hole 3.5 mm, width 7.5 mm
Use nonmetallic clamps, standard screws, and washers through 6.5-mm
predrilled holes, so that the screw hole is flush with the mounting. Mounting
material is not supplied with the antenna.
Mounting
Stick Antennas – Specifications
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
RI-ANT-S01C
RI-ANT-S02C
–30 to +70
–40 to +85
UNIT
°C
Operating Temperature
Storage Temperature
–30 to +70
–40 to +85
°C
Operating Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
Inductance (typical), at 134.2 kHz
Protection Class
Vibration
RI-ANT-S01C
RI-ANT-S02C
UNIT
27
27
µH
IP 66
IP 66
Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
Glass reinforced epoxy (gray)
Case Material
Dimensions
140 ± 2 × 21 ± 2 (dia.)
140 ± 2 × 21 ± 2 (dia.)
mm
g
Weight (typical)
134
1
185
3
Cable Length
m
Ring lugs:
Ring lugs:
Connection Terminals
Mounting
3.5-mm inside diameter
7.5-mm outside diameter
3.5-mm inside diameter
7.5-mm outside diameter
Use nonmetal clamps. Mounting material is not supplied with the antenna.
2
Submit Documentation Feedback
Copyright © 2002–2013, Texas Instruments Incorporated
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
www.ti.com
SCBS845A –MARCH 2002–REVISED JULY 2013
Readout Pattern of Ferrite Rod (Stick) and Gate Antennas
Trp. 1 reading field
Trp. 2 reading field
Trp. 1
Trp. 1
Trp. 2
Trp. 2
Stick Antenna
Figure 1. Readout Pattern of Antennas
Gate Antenna
Copyright © 2002–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
RI-ANT-G01E, RI-ANT-G02E
RI-ANT-S01C, RI-ANT-S02C
SCBS845A –MARCH 2002–REVISED JULY 2013
www.ti.com
REVISION HISTORY
REVISION
CHANGES
SCBS845
First release
Removed all information about RI-ANT-G04E and RI-ANT-P02A (obsolete)
SCBS845A
4
Submit Documentation Feedback
Copyright © 2002–2013, Texas Instruments Incorporated
Product Folder Links: RI-ANT-G01E RI-ANT-G02E RI-ANT-S01C RI-ANT-S02C
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
RI-ANT-G01E-30
RI-ANT-G02E-30
RI-ANT-S01C-30
RI-ANT-S02C-30
TRPGP40TGC
ACTIVE
0
0
0
0
0
0
0
1
TBD
TBD
TBD
TBD
TBD
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
-30 to 60
-30 to 60
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
1
1
Call TI
1
Call TI
RFIDT
RFIDT
RFIDT
TGC
TGA
TGB
2000
2000
2000
Call TI
TRPGR30ATGA
TRPGR30ATGB
Call TI
-25 to 70
-25 to 70
Pb-Free
(RoHS)
N / A for Pkg Type
TRPGR30ENATGB
TRPGR30TGC
ACTIVE
ACTIVE
RFIDT
RFIDT
TGB
TGC
0
0
2000
2000
TBD
Call TI
Call TI
Call TI
Call TI
-25 to 70
TBD
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
17-May-2014
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明