RI-I12-112A [TI]

Tag-it HF-I Transponder Inlay - Rectangle-Large -; 标签是HF -I转发镶嵌 - 矩形 - 大 -


型号：	RI-I12-112A
厂家：	TEXAS INSTRUMENTS
描述：	Tag-it HF-I Transponder Inlay - Rectangle-Large - 标签是HF -I转发镶嵌 - 矩形 - 大 -
文件：	总2页 (文件大小：190K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RA D I O F R E Q U E N C Y I D E N T I F I C A T I O N SY S T E M S

Tag-it HF-I Transponder Inlay

- Rectangle-Large -

The Tag-it HF-I Transponder Inlay is compliant

with the ISO/IEC 15693 standard. With a user

memory of 2k bits, organized in 64 blocks, the

Tag-it HF-I Transponder Inlays allows advanced

solutions for a variety of applications, including

product authentication, ticketing, library manage-

ment, supply chain management etc. The thin

and flexible Tag-it HF-I Transponder Inlays can

be easily converted into paper labels.

Specifications:

Part Number

RI-I12-112A

Supported Standard

ISO 15693-2,-3

13.56 MHz

Recommended Operating frequency

Passive Resonance Frequency (at +25°C)

13.86 MHz 200kHz (includes frequency offset to compensate

further integration into paper)

Typ. required activation field strength read (at +25°C)

Typ. required activation field strength write (at +25°C)

Factory programmed Read Only Number

Memory (user programmable)

Typical programming cycles (at +25°C)

Data retention time (at +55°C)

Simultaneous Identification of Tags

Antenna size

94 dBµA/m ^#

97 dBµA/m ^#

64 bits

2k bits organized in 64 x 32-bit blocks

100,000

> 10 years

Up to 50 tags per second (reader/antenna dependent)

45 mm x 76 mm (∼1.77 in x ∼2.99 in)

48 mm 0.5 mm (1.89 in 0.02 in)

101.6 mm +0.1mm/-0.4mm (4 in)

Foil width

Foil pitch

Thickness

Chip: 0.355mm (∼0.014 in)

Antenna: 0.085mm (∼0.0033 in)

Base material

Substrate: PET (Polyethylenetherephtalate)

Antenna: Aluminum

Smallest bending radius allowed

Operating temperature

18 mm (∼0.71 in)

-25°C to +70°C

Storage temperature (single inlay)

Storage temperature (on reel)

Delivery

-40°C to +85°C (warpage may occur at upper temperature range)

-40°C to +40°C

Single row tape wound on cardboard reel with 500 mm diameter

Reel outer width: approx. 60 mm (∼2.36 in)

Reel inner width: approx. 50 mm (∼1.97 in)

Hub diameter: 76.2 mm (3 in)

Typical quantity of good units per reel

5,000

Note: For highest possible read-out coverage we recommend to operate readers at a modulation depth of 20% or higher

^#After integration into paper

For more information, contact the sales office or distributor nearest you. This contact information can be found

on our web site at:

http://www.ti-rfid.com

Supported Command Set

Request Mode

Addressed

Request

Request Inventory Addressed Non-

Select AFI

Code

ISO 15693 Mandatory

and Optional Commands

Inventory

0x01

0x02

0x20

0x21

0x22

0x23

0x24

0x25

0x26

0x27

0x28

0x29

0x2A

0x2B

0x2C

Stay Quiet

Read_Single_Block

Write_Single_Block

Lock_Block

Read_Multi_Blocks

Write_Multi_Blocks

Select Tag

Reset to Ready

Write_AFI

Lock_AFI

Write DSFID

Lock DSFID

Get_System_info

Get_M_Blk_Sec_St

TI Custom Commands

Write_2_Blocks

Lock_2_Blocks

0xA2

0xA3

2: Implemented

- : Not applicable

Memory Organization

32 bits

Lock Bits

F U

F = Factory Lock, U = User Lock

Block #

User data

(2048 bits)

UID Number

(64 bits)

DSFID

AFI

Application

Configuration

Factory programmed

IC Version

Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in

various technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI

assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result

from assistance provided by TI.

11-09-22-129 10/02

相关型号：