SN54ACT244-SP [TI]
具有 TTL 兼容型 CMOS 输入和三态输出的航天类 8 通道、4.5V 至 5.5V 缓冲器;
| 型号： | SN54ACT244-SP |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 具有 TTL 兼容型 CMOS 输入和三态输出的航天类 8 通道、4.5V 至 5.5V 缓冲器 |
| 文件： | 总17页 (文件大小：692K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54ACT244, SN74ACT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCAS517C – JUNE 1995 – REVISED OCTOBER 2002
4.5-V to 5.5-V V
Operation
Max t of 9.5 ns at 5 V
pd
CC
Inputs Accept Voltages to 5.5 V
Inputs Are TTL Compatible
SN54ACT244 . . . J OR W PACKAGE
SN74ACT244 . . . DB, DW, N, NS, OR PW PACKAGE
(TOP VIEW)
SN54ACT244 . . . FK PACKAGE
(TOP VIEW)
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
2OE
1Y1
2A4
1Y2
2A3
1Y3
3
2
1
20 19
18
4
5
6
7
8
1Y1
2A4
1Y2
2A3
1Y3
1A2
2Y3
1A3
2Y2
1A4
17
16
15
14
9 10 11 12 13
13 2A2
12
11
1Y4
2A1
description/ordering information
These octal buffers/drivers are designed specifically to improve the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented receivers and transmitters.
The ’ACT244 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs. When
OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs
are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
PDIP – N
Tube
SN74ACT244N
SN74ACT244N
Tube
SN74ACT244DW
SN74ACT244DWR
SN74ACT244NSR
SN74ACT244DBR
SN74ACT244PWR
SNJ54ACT244J
SNJ54ACT244W
SNJ54ACT24FK
SOIC – DW
ACT244
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tube
–40°C to 85°C
SOP – NS
SSOP – DB
TSSOP – PW
CDIP – J
ACT244
AD244
AD244
SNJ54ACT244J
SNJ54ACT244W
SNJ54ACT244FK
–55°C to 125°C
CFP – W
Tube
LCCC – FK
Tube
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are
available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ACT244, SN74ACT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCAS517C – JUNE 1995 – REVISED OCTOBER 2002
FUNCTION TABLE
(each buffer)
INPUTS
OUTPUT
Y
OE
A
H
L
L
L
H
L
H
X
Z
logic diagram (positive logic)
1
19
1OE
2OE
9
7
18
16
11
13
15
2
1Y1
1Y2
2Y1
2Y2
1A1
2A1
2A2
4
1A2
5
3
14
12
6
1Y3
1Y4
2Y3
2Y4
1A3
2A3
2A4
17
8
1A4
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
+ 0.5 V
I
CC
CC
Output voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
O
Input clamp current, I (V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
IK
I
I
CC
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Continuous current through V
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±200 mA
JA
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ACT244, SN74ACT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCAS517C – JUNE 1995 – REVISED OCTOBER 2002
recommended operating conditions (see Note 3)
SN54ACT244 SN74ACT244
UNIT
MIN
4.5
2
MAX
MIN
4.5
2
MAX
V
V
V
V
V
Supply voltage
5.5
5.5
V
V
CC
IH
IL
High-level input voltage
Low-level input voltage
Input voltage
0.8
0.8
V
0
0
V
V
0
0
V
V
V
I
CC
CC
Output voltage
V
O
CC
CC
I
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature
–24
24
–24
24
8
mA
mA
ns/V
°C
OH
OL
I
∆t/∆v
8
T
–55
125
–40
85
A
NOTE 3: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
A
= 25°C
TYP
SN54ACT244 SN74ACT244
PARAMETER
TEST CONDITIONS
V
UNIT
CC
MIN
4.4
MAX
MIN
4.4
MAX
MIN
4.4
MAX
4.5 V
5.5 V
4.5 V
5.5 V
5.5 V
5.5 V
4.5 V
5.5 V
4.5 V
5.5 V
5.5 V
5.5 V
5.5 V
5.5 V
5.5 V
4.49
I
I
= –50 µA
OH
5.4
5.49
5.4
5.4
3.86
4.86
3.7
3.76
4.76
V
OH
V
= –24 mA
OH
4.7
†
†
I
I
= –50 mA
= –75 mA
3.85
OH
3.85
OH
0.001
0.001
0.1
0.1
0.1
0.1
0.1
0.1
I
= 50 µA
OL
OL
0.36
0.36
0.5
0.44
0.44
V
I
I
= 24 mA
V
OL
0.5
†
†
I
I
= 50 mA
1.65
OL
= 75 mA
1.65
±2.5
±1
OL
V
= V
or GND
CC
±0.25
±0.1
4
±5
±1
80
µA
µA
µA
O
OZ
I
I
V = V
or GND
or GND,
I
CC
CC
I
V = V
I = 0
O
40
CC
I
One input at 3.4 V,
Other inputs at GND or V
‡
5.5 V
0.6
1.6
1.5
mA
∆I
CC
CC
C
C
V = V
or GND
or GND
5 V
5 V
2.5
8
pF
pF
i
I
CC
CC
V = V
I
o
†
‡
Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms.
This is the increase in supply current for each input that is at one of the specified TTL voltage levels, rather than 0 V or V
.
CC
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ACT244, SN74ACT244
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCAS517C – JUNE 1995 – REVISED OCTOBER 2002
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
T = 25°C
A
SN54ACT244 SN74ACT244
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
ns
MIN
2
TYP
6.5
7
MAX
9
MIN
1
MAX
10
MIN
1.5
1.5
1
MAX
10
t
t
t
t
t
t
PLH
PHL
PZH
PZL
PHZ
PLZ
A
Y
Y
Y
2
9
1
10
10
1.5
2
7
8.5
9.5
9.5
10
1
9.5
11
9.5
ns
OE
OE
7
1
1.5
1.5
2
10.5
10.5
10.5
2
8
1
11
ns
2.5
7.5
1
11.5
operating characteristics, V
= 5 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
TYP
UNIT
C
Power dissipation capacitance per buffer/driver
C
= 50 pF,
L
f = 1 MHz
45
pF
pd
PARAMETER MEASUREMENT INFORMATION
2 × V
CC
Open
S1
TEST
S1
500 Ω
From Output
Under Test
t
/t
Open
PLH PHL
t
/t
2 × V
CC
Open
PLZ PZL
C
= 50 pF
L
t
/t
500 Ω
PHZ PZH
(see Note A)
LOAD CIRCUIT
Output
Control
(low-level
enabling)
3 V
0 V
1.5 V
1.5 V
t
t
PZL
PLZ
3 V
0 V
Output
Waveform 1
≈V
CC
Input
1.5 V
1.5 V
50% V
CC
V
V
+ 0.3 V
S1 at 2 × V
(see Note B)
OL
CC
V
OL
t
t
PHL
PLH
t
t
PZH
PHZ
Output
Waveform 2
S1 at Open
(see Note B)
V
OH
V
OH
– 0.3 V
OH
50% V
50% V
Output
50% V
CC
CC
CC
V
≈0 V
OL
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
NOTES: A.
C
includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
O
r
f
D. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
15-Oct-2009
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-8776001M2A
5962-8776001MRA
5962-8776001MSA
5962-8776001SRA
5962-8776001SSA
SN74ACT244DBLE
SN74ACT244DBR
ACTIVE
ACTIVE
FK
J
20
20
20
20
20
20
20
1
1
1
1
1
TBD
TBD
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
Call TI
ACTIVE
W
J
Call TI
A42
ACTIVE
CDIP
CFP
ACTIVE
W
DB
DB
Call TI
Call TI
OBSOLETE
ACTIVE
SSOP
SSOP
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ACT244DBRE4
SN74ACT244DBRG4
SN74ACT244DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
SO
DB
DB
DW
DW
DW
DW
DW
DW
N
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ACT244DWE4
SN74ACT244DWG4
SN74ACT244DWR
SN74ACT244DWRE4
SN74ACT244DWRG4
SN74ACT244N
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN74ACT244NE4
SN74ACT244NSR
SN74ACT244NSRG4
SN74ACT244PW
N
20
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
NS
NS
PW
PW
PW
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SO
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ACT244PWE4
SN74ACT244PWG4
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
70 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ACT244PWLE
SN74ACT244PWR
OBSOLETE TSSOP
PW
PW
20
20
TBD
Call TI
Call TI
ACTIVE
ACTIVE
ACTIVE
TSSOP
TSSOP
TSSOP
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ACT244PWRE4
SN74ACT244PWRG4
PW
PW
20
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ54ACT244FK
SNJ54ACT244J
SNJ54ACT244W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
20
20
1
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42
N / A for Pkg Type
N / A for Pkg Type
W
Call TI
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
15-Oct-2009
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54ACT244, SN54ACT244-SP, SN74ACT244 :
Automotive: SN74ACT244-Q1
Enhanced Product: SN74ACT244-EP
•
•
NOTE: Qualified Version Definitions:
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Enhanced Product - Supports Defense, Aerospace and Medical Applications
•
•
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Aug-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
SN74ACT244DBR
SN74ACT244DWR
SN74ACT244NSR
SN74ACT244PWR
SSOP
SOIC
SO
DB
DW
NS
20
20
20
20
2000
2000
2000
2000
330.0
330.0
330.0
330.0
16.4
24.4
24.4
16.4
8.2
10.8
8.2
7.5
13.0
13.0
7.1
2.5
2.7
2.5
1.6
12.0
12.0
12.0
8.0
16.0
24.0
24.0
16.0
Q1
Q1
Q1
Q1
TSSOP
PW
6.95
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
5-Aug-2008
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74ACT244DBR
SN74ACT244DWR
SN74ACT244NSR
SN74ACT244PWR
SSOP
SOIC
SO
DB
DW
NS
20
20
20
20
2000
2000
2000
2000
346.0
346.0
346.0
346.0
346.0
346.0
346.0
346.0
33.0
41.0
41.0
33.0
TSSOP
PW
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
www.ti.com/audio
Data Converters
DLP® Products
DSP
Clocks and Timers
Interface
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Logic
Power Mgmt
Microcontrollers
RFID
Telephony
Video & Imaging
Wireless
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2009, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明