SN74ABT863DWRE4 [TI]
9-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS; 具有三态输出的9位总线收发器型号: | SN74ABT863DWRE4 |
厂家: | TEXAS INSTRUMENTS |
描述: | 9-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS |
文件: | 总12页 (文件大小:262K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
SN54ABT863 . . . JT PACKAGE
SN74ABT863 . . . DB, DW, NT, OR PW PACKAGE
(TOP VIEW)
State-of-the-Art EPIC-ΙΙB BiCMOS Design
Significantly Reduces Power Dissipation
Typical V
(Output Ground Bounce) < 1 V
OLP
at V
= 5 V, T = 25°C
OEBA1
A1
V
CC
1
2
3
4
5
6
7
8
9
24
23
22
21
CC
A
B1
B2
B3
High-Impedance State During Power Up
and Power Down
A2
A3
A4
A5
High-Drive Outputs (–32-mA I , 64-mA I
)
OH
OL
20 B4
Latch-Up Performance Exceeds 500 mA Per
JESD 17
19 B5
A6
18 B6
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
A7
A8
17 B7
16 B8
A9 10
OEBA2 11
GND 12
15 B9
Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB) Packages, and Thin Shrink
14 OEAB2
13 OEAB1
Small-Outline (PW), Ceramic Chip Carriers
(FK), Plastic (NT), and Ceramic (JT) DIPs
SN54ABT863 . . . FK PACKAGE
(TOP VIEW)
description
The ’ABT863 devices are 9-bit transceivers
designed for asynchronous communication
between data buses. The control-function
implementation allows for maximum flexibility in
timing.
4
3
2
1
28 27 26
25
5
A3
A4
A5
NC
A6
A7
A8
B3
B4
B5
6
24
21
7
8
These devices allow noninverted data
transmission from the A bus to the B bus or from
the B bus to the A bus, depending on the logic
levels at the output-enable (OEAB and OEBA)
inputs.
22 NC
B6
9
21
10
11
20 B7
19 B8
12 13 14 15 16 17 18
The outputs are in the high-impedance state
during power up and power down. The outputs
remain in the high-impedance state while the
device is powered down.
NC – No internal connection
When V
is between 0 and 2.1 V, the device is
CC
in the high-impedance state during power up or
power down. However, to ensure the
high-impedance state above 2.1 V, OE should be
tied to V through a pullup resistor; the minimum
CC
value of the resistor is determined by the
current-sinking capability of the driver.
The SN54ABT863 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74ABT863 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
Copyright 1998, Texas Instruments Incorporated
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
FUNCTION TABLE
INPUTS
OEAB1 OEAB2 OEBA1 OEBA2
OPERATION
Latch A and B
A to B
L
L
L
L
L
H
X
L
L
X
H
L
L
L
H
X
H
H
X
X
X
H
X
X
H
H
B to A
L
L
H
X
X
H
X
H
H
X
Isolation
†
logic symbol
1
&
OEBA1
OEBA2
OEAB1
OEAB2
EN1
EN2
11
13
14
&
2
23
1
1
1
A1
B1
2
3
4
5
6
7
22
21
20
19
18
A2
A3
A4
A5
A6
B2
B3
B4
B5
B6
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
logic diagram (positive logic)
1
OEBA1
11
OEBA2
13
14
OEAB1
OEAB2
2
23
A1
B1
To Eight Other Channels
Pin numbers shown are for the DB, DW, JT, NT, and PW packages.
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (except I/O ports) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
I
Voltage range applied to any output in the high or power-off state, V
. . . . . . . . . . . . . . . . . . . –0.5 V to 5.5 V
O
Current into any output in the low state, I : SN54ABT863 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
O
SN74ABT863 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 mA
IK
OK
I
Output clamp current, I
(V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
O
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104°C/W
JA
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81°C/W
NT package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace
length of zero.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
recommended operating conditions (see Note 3)
SN54ABT863 SN74ABT863
UNIT
MIN
4.5
2
MAX
MIN
4.5
2
MAX
V
V
V
V
Supply voltage
5.5
5.5
V
V
CC
High-level input voltage
Low-level input voltage
Input voltage
IH
0.8
0.8
V
IL
0
V
0
V
CC
V
I
CC
I
I
High-level output current
Low-level output current
Input transition rise or fall rate
Power-up ramp rate
–24
48
5
–32
64
5
mA
mA
ns/V
µs/V
°C
OH
OL
∆t/∆v
∆t/∆V
Outputs enabled
200
–55
200
–40
CC
T
Operating free-air temperature
125
85
A
NOTE 3: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
= 25°C
SN54ABT863
SN74ABT863
A
PARAMETER
TEST CONDITIONS
UNIT
†
MIN TYP
MAX
MIN
MAX
MIN
MAX
V
V
V
V
V
= 4.5 V,
I = –18 mA
–1.2
–1.2
–1.2
V
IK
CC
CC
CC
I
= 4.5 V,
= 5 V,
I
I
I
I
I
I
= –3 mA
= –3 mA
= –24 mA
= –32 mA
= 48 mA
= 64 mA
2.5
3
2.5
3
2.5
3
OH
OH
OH
OH
OL
OL
V
OH
2
2
V
= 4.5 V
= 4.5 V
CC
CC
2*
2
0.55
0.55
V
V
V
V
OL
0.55*
0.55
100
mV
µA
hys
Control inputs
A or B ports
V
CC
V
CC
V
CC
= 0 to 5.5 V,
V = V
or GND
or GND
±1
±1
±1
I
CC
CC
I
I
= 2.1 V to 5.5 V, V = V
±20
±20
±20
I
= 0 to 2.1 V, V = 0.5 V to 2.7 V,
O
±50
±50
10
±50**
±50**
10
±50
±50
10
µA
µA
µA
I
I
I
OZPU
OE = * don’t care
V
= 2.1 V to 0, V = 0.5 V to 2.7 V,
CC
OE = * don’t care
O
OZPD
V
= 2.1 V to 5.5 V, V = 2.7 V,
O
CC
OE ≥ 2 V
‡
OZH
V
= 2.1 V to 5.5 V, V = 0.5 V,
O
CC
OE ≥ 2 V
‡
I
I
I
I
–10
±100*
50
–10
–10
±100
50
µA
µA
µA
OZL
V
CC
= 0,
V or V ≤ 4.5 V
I O
off
V
V
= 5.5 V,
= 5.5 V
CC
O
Outputs high
= 2.5 V
50
CEX
§
V
CC
= 5.5 V,
V
O
–50
–100
1
–225
250
30
–50
–225
250
38
–50
–225
250
38
mA
µA
O
Outputs high
Outputs low
V
I
= 5.5 V,
= 0,
CC
O
I
A or B ports
24
mA
µA
CC
V = V
I
or GND
CC
Outputs disabled
0.5
250
250
250
V
= 5.5 V,
CC
Outputs enabled
Outputs disabled
1.5
0.05
1.5
1.5
0.05
1.5
1.5
0.05
1.5
One input at 3.4 V,
Other inputs at
Data inputs
¶
mA
∆I
CC
V
CC
or GND
V
CC
= 5.5 V, One input at 3.4 V,
or GND
Control inputs
Other inputs at V
CC
C
C
Control inputs V = 2.5 V or 0.5 V
4
7
pF
pF
i
I
A or B ports
V
O
= 2.5 V or 0.5 V
io
* On products compliant to MIL-PRF-38535, this parameter does not apply.
** On products compliant to MIL-PRF-38535, this parameter is not production tested.
†
‡
§
¶
All typical values are at V
= 5 V.
CC
and I
The parameters I
include the input leakage current.
OZH
OZL
Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
This is the increase in supply current for each input that is at the specified TTL voltage level rather than V or GND.
CC
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
switching characteristics over recommended ranges of supply voltage and operating free-air
temperature, C = 50 pF (unless otherwise noted) (see Figure 1)
L
V
T
= 5 V,
= 25°C
CC
A
SN54ABT863 SN74ABT863
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN
1
TYP
2.6
2.3
3.2
3.3
4.8
4.4
MAX
4.1
3.3
4.3
4.4
6
MIN
1
MAX
7
MIN
1
MAX
5.7
3.9
5.5
5.4
6.7
6.9
t
t
t
t
t
t
PLH
PHL
PZH
PZL
PHZ
PLZ
A or B
B or A
B or A
B or A
ns
ns
ns
1
1
3.9
5.4
5.5
6.8
7.8
1
1
1
1
OEAB or OEBA
OEAB or OEBA
1
1
1
2.5
1.5
2.5
1.5
2.5
1.5
5.9
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT863, SN74ABT863
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS201E – FEBRUARY 1991 – REVISED JULY 1998
PARAMETER MEASUREMENT INFORMATION
7 V
S1
500 Ω
Open
GND
From Output
Under Test
TEST
S1
t
t
/t
Open
7 V
PLH PHL
/t
C
= 50 pF
L
t
500 Ω
PLZ PZL
/t
(see Note A)
Open
PHZ PZH
LOAD CIRCUIT
3 V
0 V
Timing Input
Data Input
1.5 V
t
w
t
t
h
su
3 V
3 V
Input
1.5 V
1.5 V
1.5 V
1.5 V
Figure 1. Load Circuit and Voltage Waveforms
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
26-Jul-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
SSOP
SSOP
Drawing
SN74ABT863DBLE
SN74ABT863DBR
OBSOLETE
ACTIVE
DB
24
24
TBD
Call TI
Call TI
DB
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ABT863DBRE4
SN74ABT863DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
DB
DW
DW
DW
DW
NT
24
24
24
24
24
24
24
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74ABT863DWE4
SN74ABT863DWR
SN74ABT863DWRE4
SN74ABT863NT
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
15
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
SN74ABT863NTE4
NT
15
Pb-Free
(RoHS)
CU NIPDAU Level-NC-NC-NC
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan
-
The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS
&
no Sb/Br)
-
please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
MECHANICAL DATA
MPDI004 – OCTOBER 1994
NT (R-PDIP-T**)
PLASTIC DUAL-IN-LINE PACKAGE
24 PINS SHOWN
A
PINS **
24
28
DIM
24
13
1.260
(32,04) (36,20)
1.425
A MAX
1.230
(31,24) (35,18)
1.385
A MIN
B MAX
B MIN
0.280 (7,11)
0.250 (6,35)
0.310
(7,87)
0.315
(8,00)
1
12
0.290
(7,37)
0.295
(7,49)
0.070 (1,78) MAX
B
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.010 (0,25)
0°–15°
0.021 (0,53)
0.015 (0,38)
M
0.010 (0,25) NOM
4040050/B 04/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明