SN74AHCT244-EP [TI]
OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS; 八路缓冲器/驱动器，具有三态输出
| 型号： | SN74AHCT244-EP |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS |
| 文件： | 总9页 (文件大小：432K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN74AHCT244-EP
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCLS493A – MAY 2003 – REVISED JUNE 2003
DW OR PW PACKAGE
(TOP VIEW)
Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
Extended Temperature Performance of
–55°C to 125°C
2OE
1Y1
2A4
1Y2
2A3
1Y3
2A2
1Y4
2A1
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
†
Qualification Pedigree
EPIC (Enhanced-Performance Implanted
CMOS) Process
Inputs Are TTL-Voltage Compatible
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Protection Exceeds 1000 V Per
MIL-STD-833, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
†
Component qualification in accordance with JEDEC and industry
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
description/ordering information
This octal buffer/driver is designed specifically to improve both the performance and density of 3-state
memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.
The SN74AHCT244 is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs.
When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are
in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
‡
PACKAGE
T
A
SOIC – D
Tape and reel
SN74AHCT244MDWREP
SN74AHCT244MPWREP
AHCT244MEP
AHT244EP
–55°C to 125°C
TSSOP – PW Tape and reel
‡
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments.
Copyright 2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74AHCT244-EP
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCLS493A – MAY 2003 – REVISED JUNE 2003
FUNCTION TABLE
(each 4-bit buffer/driver)
INPUTS
OUTPUT
Y
OE
A
H
L
L
L
H
L
H
X
Z
†
logic symbol
1
19
1OE
EN
EN
2OE
2
4
6
8
18
11
13
15
17
9
7
5
3
1A1
1A2
1A3
1A4
1Y1
1Y2
1Y3
1Y4
2A1
2A2
2A3
2A4
2Y1
2Y2
2Y3
2Y4
16
14
12
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
1
19
11
1OE
2OE
2A1
2
18
16
14
12
9
7
5
3
1A1
1Y1
1Y2
1Y3
1Y4
2Y1
2Y2
2Y3
2Y4
4
13
15
17
1A2
2A2
2A3
2A4
6
1A3
8
1A4
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74AHCT244-EP
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCLS493A – MAY 2003 – REVISED JUNE 2003
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
I
Output voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
O
CC
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20 mA
IK
I
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through V
Package thermal impedance, θ (see Note 2): DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58°C/W
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±75 mA
JA
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7
recommended operating conditions (see Note 3)
MIN
MAX
UNIT
V
V
V
V
V
V
Supply voltage
4.5
2
5.5
CC
IH
IL
High-level input voltage
Low-level input voltage
Input voltage
V
0.8
5.5
V
0
0
V
I
Output voltage
V
V
O
CC
I
High-level output current
Low-level output current
Operating free-air temperature
–8
mA
mA
°C
OH
OL
I
8
T
–55
125
A
NOTE 3: All unused inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
A
= 25°C
TYP
PARAMETER
TEST CONDITIONS
V
MIN
MAX
UNIT
V
CC
MIN
4.4
MAX
I
I
I
I
= –50
A
4.5
4.4
3.8
OH
OH
OL
OL
V
V
4.5 V
4.5 V
OH
= –8 mA
= 50
= 8 mA
= V or GND
3.94
A
0.1
0.36
±0.25
±0.1
4
0.1
0.44
±2.5
±1
V
OL
I
I
I
V
5.5 V
0 V to 5.5 V
5.5 V
A
A
A
OZ
O
CC
V = 5.5 V or GND
I
I
V = V
or GND,
I = 0
O
40
CC
I
CC
One input at 3.4 V,
Other inputs at V
‡
5.5 V
1.35
10
1.5
mA
∆I
CC
or GND
CC
or GND
C
C
V = V
5 V
5 V
2.5
3
pF
pF
i
I
CC
= V or GND
CC
V
o
O
‡
This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or V
.
CC
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74AHCT244-EP
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCLS493A – MAY 2003 – REVISED JUNE 2003
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
T
A
= 25°C
TYP
5.4
5.4
7.7
7.7
5
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN
MAX
UNIT
ns
MIN
MAX
7.4
t
t
t
t
t
t
1
1
1
1
1
1
1
1
1
1
1
1
8.5
8.5
12
12
10
10
9.5
9.5
13
13
13
13
PLH
PHL
PZH
PZL
PHZ
PLZ
A
Y
Y
Y
Y
Y
Y
C
C
C
C
C
= 15 pF
= 15 pF
= 15 pF
= 50 pF
= 50 pF
L
L
L
L
L
7.4
10.4
10.4
9.4
ns
OE
OE
ns
5
9.4
t
t
t
t
t
t
t
5.9
5.9
8.2
8.2
8.8
8.8
8.4
PLH
PHL
PZH
PZL
PHZ
PLZ
sk(o)
A
ns
8.4
11.4
11.4
11.4
11.4
1
ns
OE
OE
C
C
= 50 pF
= 50 pF
ns
ns
L
L
noise characteristics, V
= 5 V, C = 50 pF, T = 25°C (see Note 4)
CC
L
A
PARAMETER
MIN
TYP
MAX
UNIT
V
V
V
Quiet output, minimum dynamic V
High-level dynamic input voltage
Low-level dynamic input voltage
4.1
V
V
V
OH(V)
IH(D)
IL(D)
OH
2
0.8
NOTE 4: Characteristics are for surface-mount packages only.
operating characteristics, V
= 5 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
No load, f = 1 MHz
TYP
UNIT
C
Power dissipation capacitance
8.2
pF
pd
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74AHCT244-EP
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
SCLS493A – MAY 2003 – REVISED JUNE 2003
PARAMETER MEASUREMENT INFORMATION
V
CC
Open
GND
S1
R
= 1 kΩ
L
TEST
S1
From Output
Under Test
Test
Point
From Output
Under Test
t
t
/t
Open
PLH PHL
/t
C
C
L
t
V
CC
L
PLZ PZL
/t
(see Note A)
(see Note A)
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
3 V
0 V
1.5 V
Timing Input
t
w
t
h
3 V
t
su
3 V
0 V
1.5 V
1.5 V
Input
Input
1.5 V
1.5 V
Data Input
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
3 V
Output
Control
1.5 V
1.5 V
1.5 V
1.5 V
0 V
t
t
t
t
t
PZL
PLZ
PLH
PHL
Output
Waveform 1
V
≈V
OH
CC
In-Phase
Output
50% V
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
(see Note B)
CC
V
V
+ 0.3 V
OL
V
OL
OL
t
t
t
PHL
PLH
PZH
PHZ
Output
Waveform 2
S1 at GND
V
OH
V
OH
Out-of-Phase
Output
– 0.3 V
OH
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
18-Jan-2010
PACKAGING INFORMATION
Orderable Device
CAHCT244MPWREPG4
SN74AHCT244MDWREP
SN74AHCT244MPWREP
V62/03657-01XE
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
TSSOP
PW
20
20
20
20
20
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
TSSOP
TSSOP
SOIC
DW
PW
PW
DW
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
V62/03657-01YE
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74AHCT244-EP :
Catalog: SN74AHCT244
Automotive: SN74AHCT244-Q1
Military: SN54AHCT244
•
•
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Military - QML certified for Military and Defense Applications
•
•
•
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74AHCT244MDWREP SOIC
SN74AHCT244MPWREP TSSOP
DW
PW
20
20
2000
2000
330.0
330.0
24.4
16.4
10.8
6.95
13.0
7.1
2.7
1.6
12.0
8.0
24.0
16.0
Q1
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74AHCT244MDWREP
SN74AHCT244MPWREP
SOIC
DW
PW
20
20
2000
2000
367.0
367.0
367.0
367.0
45.0
38.0
TSSOP
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明