SN74BCT543DWRE4 [TI]
OCTAL REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS; 八路挂号收发器3态输出型号: | SN74BCT543DWRE4 |
厂家: | TEXAS INSTRUMENTS |
描述: | OCTAL REGISTERED TRANSCEIVERS WITH 3-STATE OUTPUTS |
文件: | 总16页 (文件大小:447K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN54BCT543, SN74BCT543
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS026C – NOVEMBER 1988 – REVISED APRIL 1994
SN54BCT543 . . . JT OR W PACKAGE
SN74BCT543 . . . DW OR NT PACKAGE
(TOP VIEW)
• State-of-the-Art BiCMOS Design
Significantly Reduces I
CCZ
• 3-State True Outputs
• Back-to-Back Registers for Storage
LEBA
OEBA
A1
1
2
3
4
5
6
7
8
9
10
24
V
CC
23 CEBA
22 B1
21 B2
20 B3
19 B4
18 B5
17 B6
16 B7
• ESD Protection Exceeds 2000 V
Per MIL-STD-883C, Method 3015
A2
A3
A4
A5
A6
A7
A8
• Package Options Include Plastic
Small-Outline Packages (DW), Ceramic
Chip Carriers (FK) and Flatpacks (W), and
Plastic and Ceramic 300-mil DIPs (JT, NT)
description
15
B8
The ′BCT543 octal transceiver contains two sets
of D-type latches for temporary storage of data
flowing in either direction. Separate latch-enable
(LEAB or LEBA) and output-enable (OEAB or
OEBA) inputs are provided for each register to
permit independent control in either direction of
data flow.
CEAB 11
GND 12
14 LEAB
13 OEAB
SN54BCT543 . . . FK PACKAGE
(TOP VIEW)
The A-to-B enable (CEAB) input must be low in
order to enter data from A or to output data from
B. If CEAB is low and LEAB is low, the A-to-B
latches are transparent; a subsequent low-to-high
transitionofLEABputstheAlatchesinthestorage
mode. With CEAB and OEAB both low, the 3-state
B outputs are active and reflect the data present
at the output of the A latches. Data flow from B to
A is similar but requires using the CEBA, LEBA,
and OEBA inputs.
4
3
2
1
28 27 26
25
5
A2
A3
A4
NC
A5
A6
A7
B2
B3
B4
6
24
23
7
8
22 NC
21 B5
20 B6
19 B7
9
10
11
12 13 14 15 16 17 18
The SN54BCT543 is characterized for operation
over the full military temperature range of –55°C
to 125°C. The SN74BCT543 is characterized for
operation from 0°C to 70°C.
NC – No internal connection
†
FUNCTION TABLE
INPUTS
OUTPUT
B
CEAB
LEAB
OEAB
A
X
X
X
L
H
X
L
L
L
X
X
H
L
X
H
L
Z
Z
‡
B
0
L
L
L
L
H
H
†
‡
A-to-B data flow is shown; B-to-A flow control is the
same except that it uses CEBA, LEBA, and OEBA.
Output level before the indicated steady-state input
conditions were established.
Copyright 1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
2–1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT543, SN74BCT543
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS026C – NOVEMBER 1988 – REVISED APRIL 1994
†
logic symbol
2
OEBA
23
1EN3
G1
CEBA
1
1C5
2EN4
G2
LEBA
13
OEAB
11
CEAB
14
2C6
LEAB
3
22
A1
5D
4
B1
3
1
1
6D
21
20
19
4
B2
B3
B4
A2
5
A3
6
A4
7
18
17
16
A5
B5
B6
B7
8
A6
9
A7
15
10
B8
A8
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
2
OEBA
23
CEBA
1
LEBA
13
OEAB
11
CEAB
14
LEAB
C1
1D
3
A1
22
B1
C1
1D
To Seven Other Channels
Pin numbers shown are for the DW, JT, NT, and W packages.
2–2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT543, SN74BCT543
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS026C – NOVEMBER 1988 – REVISED APRIL 1994
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
CC
Input voltage range: Control inputs (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
I/O ports (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
Voltage range applied to any output in the disabled or power-off state, V . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
O
Voltage range applied to any output in the high state, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to V
O
CC
Input clamp current, I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30 mA
IK
Current into any output in the low state: SN54BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
SN74BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Operating free-air temperature range: SN54BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
SN74BCT543 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
recommended operating conditions
SN54BCT543
MIN NOM MAX
SN74BCT543
UNIT
MIN NOM
MAX
V
V
V
Supply voltage
4.5
2
5
5.5
4.5
2
5
5.5
V
V
CC
IH
IL
High-level input voltage
Low-level input voltage
Input clamp current
0.8
–18
–12
48
0.8
–18
–15
64
V
I
I
I
mA
mA
mA
°C
IK
High-level output current
Low-level output current
Operating free-air temperature
OH
OL
T
A
–55
125
0
70
2–3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT543, SN74BCT543
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS026C – NOVEMBER 1988 – REVISED APRIL 1994
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN54BCT543
SN74BCT543
PARAMETER
TEST CONDITIONS
UNIT
†
†
MIN TYP
MAX
MIN TYP
MAX
V
V
V
V
= 4.5 V,
= 4.5 V
I = –18 mA
–1.2
–1.2
V
IK
CC
I
I
I
I
I
I
= –3 mA
= –12 mA
= –15 mA
= 48 mA
= 64 mA
2.4
2
3.3
3.2
2.4
2
3.3
3.1
OH
OH
OH
OL
OL
V
OH
CC
0.38
0.55
V
V
CC
V
CC
V
CC
= 4.5 V
= 5.5 V,
= 5.5 V,
V
OL
‡
0.42
0.55
0.4
V = 5.5 V
I
0.4
70
mA
µA
I
I
A or B port
Control input
A or B port
Control input
70
V = 2.7 V
I
I
IH
20
20
–0.65
–0.6
–225
71
–0.65
–0.6
–225
71
‡
V
CC
= 5.5 V,
V = 0.5 V
I
mA
I
IL
§
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 5.5 V,
= 5.5 V
= 5.5 V
= 5.5 V
= 5 V,
V
O
= 0
–100
–100
mA
mA
mA
mA
pF
I
I
I
I
OS
A or B port
45
5
45
5
CCL
CCH
CCZ
A or B port
A or B port
Control input
A or B port
8
8
9
15
9
15
C
C
V = 2.5 V or 0.5 V
I
6
6
i
= 5 V,
V
O
= 2.5 V or 0.5 V
16
16
pF
io
†
‡
§
All typical values are at V
For I/O ports, the parameters I and I include the off-state output current.
Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
= 5 V, T = 25°C.
A
CC
IH
IL
timing requirements over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
V
T
= 5 V,
= 25°C
CC
A
SN54BCT543 SN74BCT543
UNIT
MIN
7
MAX
MIN
8
MAX
MIN
7
MAX
t
w
t
su
t
h
Pulse duration, LEAB or LEBA low
Setup time, data before LEAB or LEBA↑
Hold time, data after LEAB or LEBA↑
ns
ns
ns
High or low
High or low
4.5
1.5
5.5
1.5
4.5
1.5
2–4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54BCT543, SN74BCT543
OCTAL REGISTERED TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS026C – NOVEMBER 1988 – REVISED APRIL 1994
switching characteristics (see Note 2)
V
C
= 5 V,
= 50 pF,
V
= 4.5 V to 5.5 V,
C = 50 pF,
L
CC
L
CC
R1 = 500 Ω,
R2 = 500 Ω,
T
A
R1 = 500 Ω,
R2 = 500 Ω,
†
T = MIN to MAX
A
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
= 25°C
′BCT543
TYP
5.7
SN54BCT543 SN74BCT543
MIN
2
MAX
7.5
MIN
2
MAX
9.9
MIN
2
MAX
8.8
t
t
t
t
t
t
t
t
t
t
t
t
PLH
PHL
PLH
PHL
PZH
PZL
PHZ
PLZ
PZH
PZL
PHZ
PLZ
A or B
B or A
A or B
A or B
A or B
A or B
A or B
ns
ns
ns
ns
ns
ns
2
6.3
8.2
2
9.7
2
9.6
2
8.2
10.3
10.6
8.6
2
13.9
13.2
11.4
12.8
8.8
2
12.9
12.7
10.7
12.3
8.1
LE
OE
OE
CE
CE
2
8.5
2
2
1
6.8
1
1
1
8.7
10.8
7.2
1
1
1
5.5
1
1
1
4.7
6.4
1
8.1
1
7.2
1
7.6
9.8
1
12.8
13.8
9.3
1
12
1
9.5
11.6
7.5
1
1
13.5
8.5
1
5.8
1
1
1
4.8
6.7
1
8.4
1
7.6
†
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 2: Load circuits and voltage waveforms are shown in Section 1.
2–5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
2–6
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CFP
Drawing
5962-9087001M3A
5962-9087001MKA
5962-9087001MLA
SN74BCT543DW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
FK
28
24
24
24
1
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
W
A42
N / A for Pkg Type
N / A for Pkg Type
CDIP
SOIC
JT
A42 SNPB
DW
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN74BCT543DWE4
SN74BCT543DWG4
SN74BCT543DWR
SN74BCT543DWRE4
SN74BCT543DWRG4
SN74BCT543NT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
DW
DW
DW
DW
DW
NT
24
24
24
24
24
24
24
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
15
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
POST-PLATE N / A for Pkg Type
SN74BCT543NTE4
NT
15
Pb-Free
(RoHS)
SNJ54BCT543FK
SNJ54BCT543JT
SNJ54BCT543W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
JT
W
28
24
24
1
1
1
TBD
TBD
TBD
A42 SNPB
A42
N / A for Pkg Type
N / A for Pkg Type
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Feb-2008
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
(mm)
SN74BCT543DWR
DW
24
SITE 60
330
24
10.75
15.7
2.7
12
24
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Feb-2008
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
SN74BCT543DWR
DW
24
SITE 60
346.0
346.0
41.0
Pack Materials-Page 2
MECHANICAL DATA
MCER004A – JANUARY 1995 – REVISED JANUARY 1997
JT (R-GDIP-T**)
CERAMIC DUAL-IN-LINE
24 LEADS SHOWN
PINS **
A
24
28
DIM
13
24
1.280
(32,51) (37,08)
1.460
A MAX
1.240
(31,50) (36,58)
1.440
B
A MIN
B MAX
B MIN
0.300
(7,62)
0.291
(7,39)
1
12
0.070 (1,78)
0.030 (0,76)
0.245
(6,22)
0.285
(7,24)
0.320 (8,13)
0.290 (7,37)
0.015 (0,38) MIN
0.100 (2,54) MAX
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.023 (0,58)
0.015 (0,38)
0°–15°
0.014 (0,36)
0.008 (0,20)
0.100 (2,54)
4040110/C 08/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP3-T24, GDIP4-T28, and JEDEC MO-058 AA, MO-058 AB
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MCFP007 – OCTOBER 1994
W (R-GDFP-F24)
CERAMIC DUAL FLATPACK
0.375 (9,53)
0.340 (8,64)
Base and Seating Plane
0.006 (0,15)
0.004 (0,10)
0.045 (1,14)
0.026 (0,66)
0.090 (2,29)
0.045 (1,14)
0.395 (10,03)
0.360 (9,14)
0.360 (9,14)
0.240 (6,10)
0.360 (9,14)
0.240 (6,10)
0.019 (0,48)
0.015 (0,38)
1
24
0.050 (1,27)
0.640 (16,26)
0.490 (12,45)
0.030 (0,76)
0.015 (0,38)
12
13
30° TYP
1.115 (28,32)
0.840 (21,34)
4040180-5/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Falls within MIL-STD-1835 GDFP2-F24 and JEDEC MO-070AD
E. Index point is provided on cap for terminal identification only.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI004 – OCTOBER 1994
NT (R-PDIP-T**)
PLASTIC DUAL-IN-LINE PACKAGE
24 PINS SHOWN
A
PINS **
24
28
DIM
24
13
1.260
(32,04) (36,20)
1.425
A MAX
1.230
(31,24) (35,18)
1.385
A MIN
B MAX
B MIN
0.280 (7,11)
0.250 (6,35)
0.310
(7,87)
0.315
(8,00)
1
12
0.290
(7,37)
0.295
(7,49)
0.070 (1,78) MAX
B
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.010 (0,25)
0°–15°
0.021 (0,53)
0.015 (0,38)
M
0.010 (0,25) NOM
4040050/B 04/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明