SN74CBTLV16212DGVR [TI]
CBTLV/3B SERIES, 24-BIT EXCHANGER, TRUE OUTPUT, PDSO56, TVSOP-56;![SN74CBTLV16212DGVR](http://pdffile.icpdf.com/pdf2/p00275/img/icpdf/SN74CBTLV162_1646089_icpdf.jpg)
型号: | SN74CBTLV16212DGVR |
厂家: | ![]() |
描述: | CBTLV/3B SERIES, 24-BIT EXCHANGER, TRUE OUTPUT, PDSO56, TVSOP-56 光电二极管 输出元件 逻辑集成电路 电视 |
文件: | 总13页 (文件大小:361K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
ꢀꢁꢂ ꢃ ꢄꢅꢆ ꢇꢈ ꢉꢊ ꢋꢉ ꢋ
ꢇ ꢌ ꢍꢎꢈꢌ ꢇꢆꢏꢐ ꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓ ꢑꢆ ꢅꢔꢀ ꢎꢑꢕꢄ ꢖꢏꢁꢐ ꢑ ꢀ ꢍꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
DGG, DGV, OR DL PACKAGE
(TOP VIEW)
D
Member of the Texas Instruments
Widebus Family
D
D
D
4-Ω Switch Connection Between Two Ports
Rail-to-Rail Switching on Data I/O Ports
1
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
S0
1A1
1A2
2A1
2A2
3A1
3A2
GND
4A1
4A2
5A1
5A2
6A1
6A2
7A1
7A2
S1
S2
2
3
I
Supports Partial-Power-Down Mode
1B1
1B2
2B1
2B2
3B1
GND
3B2
4B1
4B2
5B1
5B2
6B1
6B2
7B1
7B2
8B1
GND
8B2
9B1
9B2
10B1
10B2
11B1
11B2
12B1
12B2
off
4
Operation
5
D
Break-Before-Make Feature
6
D
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
7
8
D
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 200-V Machine Model (A115-A)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
description/ordering information
The SN74CBTLV16212 provides 24 bits of
high-speed bus switching or exchanging. The low
on-state resistance of the switch allows
connections to be made with minimal propagation
delay.
V
CC
8A1
GND
8A2
9A1
9A2
10A1
10A2
11A1
11A2
12A1
12A2
The device operates as a 24-bit bus switch or a
12-bit bus exchanger, which provides data
exchanging between the four signal ports via the
data-select (S0, S1, S2) terminals.
This
device
is
fully
specified
for
partial-power-down applications using I . The I
off
off
feature ensures that damaging current will not
backflow through the device when it is powered
down. The device has isolation during power off.
The SN74CBTLV16212 is specified by the
break-before-make feature to have no through
current when switching between B ports.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
PACKAGE
T
A
Tube
SN74CBTLV16212DL
SN74CBTLV16212DLR
SN74CBTLV16212GR
SN74CBTLV16212VR
SSOP − DL
CBTLV16212
Tape and reel
−40°C to 85°C
TSSOP − DGG Tape and reel
TVSOP − DGV Tape and reel
CBTLV16212
CN212
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
ꢗ
ꢗ
ꢘ
ꢌ
ꢩ
ꢙ
ꢤ
ꢔ
ꢄ
ꢢ
ꢆ
ꢣ
ꢒ
ꢝ
ꢌ
ꢛ
ꢁ
ꢜ
ꢙ
ꢏ
ꢆ
ꢏ
ꢚ
ꢛ
ꢥ
ꢜ
ꢝ
ꢣ
ꢞ
ꢟ
ꢠ
ꢠ
ꢡ
ꢡ
ꢚ
ꢚ
ꢝ
ꢝ
ꢛ
ꢛ
ꢚ
ꢢ
ꢢ
ꢦ
ꢣ
ꢤ
ꢞ
ꢞ
ꢥ
ꢥ
ꢛ
ꢡ
ꢠ
ꢟ
ꢢ
ꢢ
ꢝ
ꢜ
ꢦ
ꢆꢥ
ꢤ
ꢧ
ꢢ
ꢨ
ꢚ
ꢣ
ꢠ
ꢢ
ꢡ
ꢚ
ꢡ
ꢝ
ꢞ
ꢛ
ꢤ
ꢩ
ꢠ
ꢛ
ꢡ
ꢡ
ꢥ
ꢢ
ꢪ
Copyright 2003, Texas Instruments Incorporated
ꢞ
ꢝ
ꢣ
ꢡ
ꢝ
ꢞ
ꢟ
ꢡ
ꢝ
ꢢ
ꢦ
ꢚ
ꢜ
ꢚ
ꢣ
ꢥ
ꢞ
ꢡ
ꢫ
ꢡ
ꢥ
ꢞ
ꢝ
ꢜ
ꢬ
ꢠ
ꢒ
ꢛ
ꢟ
ꢥ
ꢢ
ꢡ
ꢠ
ꢛ
ꢩ
ꢠ
ꢞ
ꢩ
ꢭ
ꢠ
ꢡ ꢥ ꢢ ꢡꢚ ꢛꢯ ꢝꢜ ꢠ ꢨꢨ ꢦꢠ ꢞ ꢠ ꢟ ꢥ ꢡ ꢥ ꢞ ꢢ ꢪ
ꢞ
ꢞ
ꢠ
ꢛ
ꢡ
ꢮ
ꢪ
ꢗ
ꢞ
ꢝ
ꢩ
ꢤ
ꢣ
ꢡ
ꢚ
ꢝ
ꢛ
ꢦ
ꢞ
ꢝ
ꢣ
ꢥ
ꢢ
ꢢꢚ
ꢛ
ꢯ
ꢩ
ꢝ
ꢥ
ꢢ
ꢛ
ꢝ
ꢡ
ꢛ
ꢥ
ꢣ
ꢥ
ꢢ
ꢢ
ꢠ
ꢞ
ꢚ
ꢨ
ꢮ
ꢚ
ꢛ
ꢣ
ꢨ
ꢤ
ꢩ
ꢥ
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁꢂ ꢃꢄ ꢅ ꢆ ꢇꢈꢉ ꢊ ꢋꢉ ꢋ
ꢇ ꢌꢍꢎꢈ ꢌꢇꢆꢏ ꢐꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓꢑ ꢆ ꢅꢔ ꢀꢎꢑ ꢕ ꢄꢖꢏ ꢁꢐ ꢑ ꢀꢍ ꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
FUNCTION TABLE
INPUTS/OUTPUTS
INPUTS
FUNCTION
S2
L
S1
L
S0
L
A1
Z
A2
Z
Disconnect
L
L
H
L
B1
B2
Z
Z
A1 port = B1 port
A1 port = B2 port
A2 port = B1 port
A2 port = B2 port
Disconnect
L
H
H
L
Z
L
H
L
B1
B2
Z
H
H
Z
L
H
Z
A1 port = B1 port
A2 port = B2 port
H
H
H
H
L
B1
B2
B2
B1
A1 port = B2 port
A2 port = B1 port
H
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀꢁꢂ ꢃ ꢄꢅꢆ ꢇꢈ ꢉꢊ ꢋꢉ ꢋ
ꢇ ꢌ ꢍꢎꢈꢌ ꢇꢆꢏꢐ ꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓ ꢑꢆ ꢅꢔꢀ ꢎꢑꢕꢄ ꢖꢏꢁꢐꢑ ꢀ ꢍꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
logic diagram (positive logic)
2
54
1A1
1B1
SW
SW
SW
3
53
SW
1B2
1A2
27
30
12A1
12B1
SW
SW
SW
28
29
12B2
SW
12A2
1
S0
56
S1
55
S2
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁꢂ ꢃꢄ ꢅ ꢆ ꢇꢈꢉ ꢊ ꢋꢉ ꢋ
ꢇ ꢌꢍꢎꢈ ꢌꢇꢆꢏ ꢐꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓꢑ ꢆ ꢅꢔ ꢀꢎꢑ ꢕ ꢄꢖꢏ ꢁꢐ ꢑ ꢀꢍ ꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
simplified schematic, each FET switch
A
B
(OE)
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.6 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.6 V
I
Continuous channel current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA
IK
I
Package thermal impedance, θ (see Note 2): DGG package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
JA
DGV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48°C/W
DL package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56°C/W
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Storage temperature range, T
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 3)
MIN
2.3
1.7
2
MAX
UNIT
V
V
Supply voltage
3.6
V
CC
V
CC
V
CC
V
CC
V
CC
= 2.3 V to 2.7 V
= 2.7 V to 3.6 V
= 2.3 V to 2.7 V
= 2.7 V to 3.6 V
High-level control input voltage
V
IH
0.7
0.8
85
V
IL
Low-level control input voltage
Operating free-air temperature
V
T
A
−40
°C
NOTE 3: All unused control inputs of the device must be held at V
or GND to ensure proper device operation. Refer to the TI application report,
CC
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀꢁꢂ ꢃ ꢄꢅꢆ ꢇꢈ ꢉꢊ ꢋꢉ ꢋ
ꢇ ꢌ ꢍꢎꢈꢌ ꢇꢆꢏꢐ ꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓ ꢑꢆ ꢅꢔꢀ ꢎꢑꢕꢄ ꢖꢏꢁꢐꢑ ꢀ ꢍꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
†
PARAMETER
TEST CONDITIONS
I = −18 mA
MIN TYP
MAX
−1.2
1
UNIT
V
V
V
V
V
V
V
= 3 V,
IK
CC
CC
CC
CC
CC
I
I
I
I
= 3.6 V,
= 0,
V = V
I CC
or GND
µA
µA
µA
µA
pF
I
V or V = 0 to 3.6 V
10
off
I
O
= 3.6 V,
= 3.6 V,
I
O
= 0,
V = V
I CC
or GND
10
CC
‡
∆I
CC
Control inputs
One input at 3 V,
Other inputs at V
CC
or GND
300
C
C
Control inputs V = 3 V or 0
5
8
5
5
i
I
V
O
= 3 V or 0,
S , S , and S = GND
pF
io(OFF)
1
2
3
I = 64 mA
8
8
I
V = 0
I
V
CC
= 2.3 V,
I = 24 mA
I
TYP at V
CC
= 2.5 V
V = 1.7 V,
I
I = 15 mA
I
27
40
§
on
Ω
r
I = 64 mA
5
5
7
7
I
V = 0
I
V
CC
= 3 V
I = 24 mA
I
V = 2.4 V,
I
I = 15 mA
I
10
15
†
‡
§
All typical values are at V
This is the increase in supply current for each input that is at the specified voltage level, rather than V
Measured by the voltage drop between the A and B terminals at the indicated current through the switch. On-state resistance is determined by
the lower of the voltages of the two (A or B) terminals.
= 3.3 V (unless otherwise noted), T = 25°C.
A
CC
or GND.
CC
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figure 1)
V
= 2.5 V
V
= 3.3 V
CC
0.2 V
CC
0.3 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
MIN MAX
MIN MAX
¶
t
pd
A or B
B or A
0.15
0.25
ns
S
S
S
B or A
A or B
A or B
3
3
1
11.1
10.9
8.7
3
3
2
8.8
8.6
8.8
ns
ns
ns
t
t
t
pd
en
dis
¶
The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance, when
driven by an ideal voltage source (zero output impedance).
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
ꢀ ꢁꢂ ꢃꢄ ꢅ ꢆ ꢇꢈꢉ ꢊ ꢋꢉ ꢋ
ꢇ ꢌꢍꢎꢈ ꢌꢇꢆꢏ ꢐꢑ ꢋ ꢃ ꢎꢅꢒ ꢆ ꢓꢑ ꢆ ꢅꢔ ꢀꢎꢑ ꢕ ꢄꢖꢏ ꢁꢐ ꢑ ꢀꢍ ꢒ ꢆꢄ ꢖ
SCDS044I − DECEMBER 1997 − REVISED OCTOBER 2003
PARAMETER MEASUREMENT INFORMATION
2 × V
CC
TEST
S1
S1
t
/t
Open
Open
R
PLH PHL
L
From Output
Under Test
t
/t
2 × V
CC
GND
PLZ PZL
GND
t
/t
PHZ PZH
C
L
R
L
(see Note A)
C
V
∆
R
V
CC
L
L
2.5 V 0.2 V
3.3 V 0.3 V
500 Ω
500 Ω
0.15 V
0.3 V
30 pF
50 pF
LOAD CIRCUIT
V
CC
Timing Input
V
CC
/2
0 V
t
w
t
t
h
su
V
CC
V
CC
V
CC
/2
V
CC
/2
Input
V
CC
/2
V
CC
/2
Data Input
0 V
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
CC
CC
Output
Control
V
CC
/2
V
CC
/2
V
CC
/2
V
/2
Input
CC
0 V
V
0 V
t
t
t
PHL
t
t
PLH
PZL
PLZ
+ V
Output
Waveform 1
V
V
OH
CC
V
V
/2
/2
V
CC
/2
V
CC
/2
/2
Output
CC
S1 at 2 × V
(see Note B)
CC
V
OL
∆
V
OL
OL
t
t
t
PHL
PLH
/2
PZH
PHZ
− V
Output
Waveform 2
S1 at GND
V
V
V
OH
OH
V
OH
∆
V
CC
V
CC
CC
Output
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A.
C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2 ns, t ≤ 2 ns.
O
r
f
D. The outputs are measured one at a time with one transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
.
PLZ
PZL
PLH
PHZ
PZH
PHL
dis
are the same as t
en
are the same as t .
pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
27-Sep-2007
PACKAGING INFORMATION
Orderable Device
74CBTLV16212DLG4
74CBTLV16212DLRG4
74CBTLV16212GRE4
74CBTLV16212GRG4
74CBTLV16212VRE4
74CBTLV16212VRG4
SN74CBTLV16212DL
SN74CBTLV16212DLR
SN74CBTLV16212GR
SN74CBTLV16212VR
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SSOP
DL
56
56
56
56
56
56
56
56
56
56
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SSOP
TSSOP
TSSOP
TVSOP
TVSOP
SSOP
DL
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DGG
DGG
DGV
DGV
DL
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SSOP
DL
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TVSOP
DGG
DGV
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
SN74CBTLV16212DLR
SN74CBTLV16212GR
SN74CBTLV16212VR
SSOP
TSSOP
TVSOP
DL
56
56
56
1000
2000
2000
330.0
330.0
330.0
32.4
24.4
24.4
11.35
8.6
18.67
15.6
11.7
3.1
1.8
1.6
16.0
12.0
12.0
32.0
24.0
24.0
Q1
Q1
Q1
DGG
DGV
6.8
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74CBTLV16212DLR
SN74CBTLV16212GR
SN74CBTLV16212VR
SSOP
TSSOP
TVSOP
DL
56
56
56
1000
2000
2000
346.0
346.0
346.0
346.0
346.0
346.0
49.0
41.0
41.0
DGG
DGV
Pack Materials-Page 2
MECHANICAL DATA
MSSO001C – JANUARY 1995 – REVISED DECEMBER 2001
DL (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
48 PINS SHOWN
0.025 (0,635)
48
0.0135 (0,343)
0.008 (0,203)
0.005 (0,13)
M
25
0.010 (0,25)
0.005 (0,13)
0.299 (7,59)
0.291 (7,39)
0.420 (10,67)
0.395 (10,03)
Gage Plane
0.010 (0,25)
0°–ā8°
1
24
0.040 (1,02)
0.020 (0,51)
A
Seating Plane
0.004 (0,10)
0.008 (0,20) MIN
PINS **
0.110 (2,79) MAX
28
48
0.630
56
DIM
0.380
(9,65)
0.730
A MAX
A MIN
(16,00) (18,54)
0.370
(9,40)
0.620
0.720
(15,75) (18,29)
4040048/E 12/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15).
D. Falls within JEDEC MO-118
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS003D – JANUARY 1995 – REVISED JANUARY 1998
DGG (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
48 PINS SHOWN
0,27
0,17
M
0,08
0,50
48
25
6,20
6,00
8,30
7,90
0,15 NOM
Gage Plane
0,25
1
24
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
48
56
64
DIM
A MAX
12,60
12,40
14,10
13,90
17,10
16,90
A MIN
4040078/F 12/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000
DGV (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
24 PINS SHOWN
0,23
0,13
M
0,07
0,40
24
13
0,16 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
0°–ā8°
0,75
1
12
0,50
A
Seating Plane
0,08
0,15
0,05
1,20 MAX
PINS **
14
16
20
24
38
48
56
DIM
A MAX
A MIN
3,70
3,50
3,70
3,50
5,10
4,90
5,10
4,90
7,90
7,70
9,80
9,60
11,40
11,20
4073251/E 08/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side.
D. Falls within JEDEC: 24/48 Pins – MO-153
14/16/20/56 Pins – MO-194
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号:
![](http://pdffile.icpdf.com/pdf1/p00114/img/page/SN74CBTLV16235_621983_files/SN74CBTLV16235_621983_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00114/img/page/SN74CBTLV16235_621983_files/SN74CBTLV16235_621983_2.jpg)
SN74CBTLV16235DGGR
CBTLV/3B SERIES, 18 1 LINE TO 2 LINE MULTIPLEXER AND DEMUX/DECODER, TRUE OUTPUT, PDSO64, PLASTIC, TSSOP-64
TI
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_2.jpg)
SN74CBTLV16292
LOW-VOLTAGE 12-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER WITH INTERNAL PULLDOWN RESISTORS
TI
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_2.jpg)
SN74CBTLV16292DGG
LOW-VOLTAGE 12-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER WITH INTERNAL PULLDOWN RESISTORS
TI
![](http://pdffile.icpdf.com/pdf2/p00285/img/page/SN74CBTLV162_1709550_files/SN74CBTLV162_1709550_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00285/img/page/SN74CBTLV162_1709550_files/SN74CBTLV162_1709550_2.jpg)
SN74CBTLV16292DGGR
CBTLV/3B SERIES, 12 1 LINE TO 2 LINE MULTIPLEXER AND DEMUX/DECODER, TRUE OUTPUT, PDSO56, TSSOP-56
TI
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_1.jpg)
![](http://pdffile.icpdf.com/pdf1/p00061/img/page/SN74CBTLV16292_321959_files/SN74CBTLV16292_321959_2.jpg)
SN74CBTLV16292DGV
LOW-VOLTAGE 12-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER WITH INTERNAL PULLDOWN RESISTORS
TI
©2020 ICPDF网 联系我们和版权申明