SN74LV244ATDBRG4 [TI]
LV/LV-A/LVX/H SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, GREEN, PLASTIC, SSOP-20;
| 型号： | SN74LV244ATDBRG4 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | LV/LV-A/LVX/H SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, GREEN, PLASTIC, SSOP-20 驱动 光电二极管 输出元件 逻辑集成电路 |
| 文件： | 总19页 (文件大小：798K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
FEATURES
•
•
•
•
Inputs Are TTL-Voltage Compatible
4.5-V to 5.5-V VCC Operation
Typical tpd = 5.4 ns at 5 V
•
•
•
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 250 mA Per
JESD 17
Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 5 V, TA = 25°C
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
•
•
Typical VOHV (Output VOH Undershoot)
>2.3 V at VCC = 5 V, TA = 25°C
Supports Mixed-Mode Voltage Operation on
All Ports
– 1000-V Charged-Device Model (C101)
RGY PACKAGE
(TOP VIEW)
DB, DGV, DW, NS, OR PW PACKAGE
(TOP VIEW)
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
2OE
1Y1
2A4
1
20
19
18
17
16
15
14
13
12
2
3
4
5
6
7
8
9
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
2OE
1Y1
2A4
1Y2
2A3
1Y3
2A2
1Y4
16 1Y2
15 2A3
14
13
12
11
1Y3
2A2
1Y4
2A1
10
11
DESCRIPTION/ORDERING INFORMATION
This octal buffer/driver is designed specifically to improve both the performance and density of 3-state
memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.
The SN74LV244AT is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs. When
OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the
high-impedance state.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74LV244ATRGYR
SN74LV244ATDW
TOP-SIDE MARKING
VV244
QFN – RGY
SOIC – DW
Reel of 1000
Tube of 25
LV244AT
Reel of 2000
Reel of 2000
Reel of 2000
Tube of 70
SN74LV244ATDWR
SN74LV244ATNSR
SN74LV244ATDBR
SN74LV244ATPW
SOP – NS
74LV244AT
LV244AT
–40°C to 85°C
SSOP – DB
TSSOP – PW
TVSOP – DGV
Reel of 2000
Reel of 250
Reel of 2000
SN74LV244ATPWR
SN74LV244ATPWT
SN74LV244ATDGVR
LV244AT
LV244AT
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004–2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
To ensure the high-impedance state during power up or power down, OE shall be tied to VCC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
FUNCTION TABLE
(EACH 4-BIT BUFFER/DRIVER)
INPUTS
OUTPUT
Y
OE
L
A
H
L
H
L
L
H
X
Z
LOGIC DIAGRAM (POSITIVE LOGIC)
1
2
19
1OE
1A1
2OE
18
16
14
12
11
13
15
17
9
7
5
3
1Y1
1Y2
1Y3
1Y4
2A1
2A2
2A3
2A4
2Y1
2Y2
2Y3
2Y4
4
6
8
1A2
1A3
1A4
2
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
MAX UNIT
VCC
VI
Supply voltage range
Input voltage range(2)
Voltage range applied to any output in the high-impedance or power-off state(2)
Output voltage range applied in the high or low state(2)(3)
7
7
7
V
V
VO
VO
IIK
V
–0.5 VCC + 0.5
V
Input clamp current
VI < 0
–20
–50
±35
±70
70
mA
mA
mA
mA
IOK
IO
Output clamp current
VO < 0
Continuous output current
Continuous current through VCC or GND
VO = 0 to VCC
DB package(4)
DGV package(4)
DW package(4)
NS package(4)
PW package(4)
RGY package(5)
92
58
θJA
Package thermal impedance
Storage temperature range
°C/W
°C
60
83
37
Tstg
–65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 5.5 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7
(5) The package thermal impedance is calculated in accordance with JESD 51-5.
Recommended Operating Conditions(1)
MIN
4.5
2
MAX UNIT
VCC
VIH
VIL
VI
Supply voltage
5.5
V
V
V
V
High-level input voltage
Low-level input voltage
Input voltage
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
0.8
5.5
VCC
5.5
–16
16
0
0
0
High or low state
3-state
VO
Output voltage
V
IOH
IOL
High-level output current
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
VCC = 4.5 V to 5.5 V
mA
mA
ns/V
°C
Low-level output current
∆t/∆v
TA
Input transition rise or fall rate
Operating free-air temperature
20
–40
85
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
TA = –40°C
to 85°C
TA = 25°C
TYP MAX
PARAMETER
TEST CONDITIONS
VCC
UNIT
MIN
4.4
MIN MAX
IOH = –50 µA
IOH = –16 mA
IOL = 50 µA
IOL = 16 mA
4.5 V
4.5 V
4.5 V
4.5 V
0 to 5.5 V
5.5 V
5.5 V
5.5 V
0
4.5
4.4
3.8
0.1
0.55
±1
VOH
V
V
3.8
0
0.1
0.55
±0.1
±0.25
2
VOL
II
VI = 5.5 V or GND
µA
µA
µA
mA
µA
pF
IOZ
VO = VCC or GND
±2.5
20
ICC
VI = VCC or GND, IO = 0
One input at 3.4 V, Other inputs at VCC or GND
VI or VO = 0 to 5.5 V
(1)
∆ICC
1.35
0.5
1.5
5
Ioff
Ci
VI = VCC or GND
4.5
(1) This is the increase in supply current for each input at one of the specified TTL voltage levels, rather than 0 V or VCC
.
Switching Characteristics
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
TA = 25°C
TYP MAX
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN MAX UNIT
MIN
2.6
2.4
2.2
2.7
2.2
2.5
4
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tPLH
tPHL
tPZH
tPZL
tPHZ
tPLZ
tsk(o)
5/4
5.4
7.4
7.4
1
1
1
1
1
1
1
1
1
1
1
1
8.5
8.5
12
12
8
A or B
OE
B or A
A or B
A or B
B or A
A or B
A or B
CL = 15 pF
CL = 15 pF
CL = 15 pF
CL = 50 pF
CL = 50 pF
ns
ns
ns
ns
ns
7.7 10.4
7.7 10.4
3.9
3.9
5.9
5.9
7.7
7.7
8.9
8.9
OE
8
9.5
9.5
13
13
13
13
1
A or B
OE
4.7
3.9
4.9
3.3
3.2
8.2 11.4
8.2 11.4
8.8 11.4
8.8 11.4
1
OE
CL = 50 pF
CL = 50 pF
ns
ns
Noise Characteristics(1)
VCC = 5 V, CL = 50 pF
TA = 25°C
PARAMETER
Quiet output, maximum dynamic VOL
UNIT
MIN TYP
MAX
VOL(P)
VOL(V)
VOH(V)
VIH(D)
VIL(D)
0.8
1
V
V
V
V
V
Quiet output, minimum dynamic VOL
Quiet output, minimum dynamic VOH
High-level dynamic input voltage
Low-level dynamic input voltage
–0.8
–1
4
2
0.8
(1) Characteristics are for surface-mount packages only.
4
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
Operating Characteristics
VCC = 5 V, TA = 25°C
PARAMETER
Power dissipation capacitance
TEST CONDITIONS
CL = 50 pF, f = 10 MHz
TYP
UNIT
Cpd
Outputs enabled
8
pF
5
SN74LV244AT
OCTAL BUFFER/DRIVER
WITH 3-STATE OUTPUTS
www.ti.com
SCES572C–JUNE 2004–REVISED AUGUST 2005
PARAMETER MEASUREMENT INFORMATION
V
CC
S1
Open
GND
R
L
= 1 kΩ
TEST
/t
S1
From Output
Under Test
Test
Point
From Output
Under Test
t
t
Open
PLH PHL
C
L
C
L
t
/t
V
CC
PLZ PZL
(see Note A)
(see Note A)
/t
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
3 V
0 V
1.5 V
Timing Input
t
w
t
h
3 V
t
su
3 V
0 V
1.5 V
1.5 V
Input
Input
1.5 V
1.5 V
Data Input
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
3 V
Output
Control
1.5 V
1.5 V
1.5 V
1.5 V
0 V
t
t
PZL
PLZ
t
t
t
PHL
PLH
Output
Waveform 1
≈V
V
CC
OH
In-Phase
Output
50% V
50% V
50% V
CC
50% V
CC
CC
V
S1 at V
CC
V
V
+ 0.3 V
OL
V
OL
OL
(see Note B)
t
t
t
PZH
PHZ
PHL
PLH
Output
Waveform 2
S1 at GND
V
OH
V
OH
Out-of-Phase
Output
− 0.3 V
OH
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time, with one input transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PHL
PHZ
are the same as t
PZH
en
are the same as t .
PLH pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuits and Voltage Waveforms
6
PACKAGE OPTION ADDENDUM
www.ti.com
10-Jun-2014
PACKAGING INFORMATION
Orderable Device
SN74LV244ATDWR
SN74LV244ATNSR
SN74LV244ATPW
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
ACTIVE
SOIC
SO
DW
20
20
20
20
20
20
20
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
LV244AT
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
NS
PW
2000
70
Green (RoHS
& no Sb/Br)
74LV244AT
LV244AT
LV244AT
LV244AT
VV244
TSSOP
TSSOP
TSSOP
VQFN
VQFN
Green (RoHS
& no Sb/Br)
SN74LV244ATPWR
SN74LV244ATPWT
SN74LV244ATRGYR
SN74LV244ATRGYRG4
PW
2000
250
Green (RoHS
& no Sb/Br)
PW
Green (RoHS
& no Sb/Br)
RGY
RGY
3000
3000
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
VV244
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
10-Jun-2014
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74LV244ATDWR
SN74LV244ATNSR
SN74LV244ATPWR
SN74LV244ATPWT
SN74LV244ATRGYR
SOIC
SO
DW
NS
20
20
20
20
20
2000
2000
2000
250
330.0
330.0
330.0
330.0
330.0
24.4
24.4
16.4
16.4
12.4
10.8
8.2
13.0
13.0
7.1
2.7
2.5
1.6
1.6
1.6
12.0
12.0
8.0
24.0
24.0
16.0
16.0
12.0
Q1
Q1
Q1
Q1
Q1
TSSOP
TSSOP
VQFN
PW
PW
RGY
6.95
6.95
3.8
7.1
8.0
3000
4.8
8.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74LV244ATDWR
SN74LV244ATNSR
SN74LV244ATPWR
SN74LV244ATPWT
SN74LV244ATRGYR
SOIC
SO
DW
NS
20
20
20
20
20
2000
2000
2000
250
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
45.0
45.0
38.0
38.0
35.0
TSSOP
TSSOP
VQFN
PW
PW
RGY
3000
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明