SN75LBC771NS [TI]
DUAL LINE TRANSCEIVER, PDSO20;型号: | SN75LBC771NS |
厂家: | TEXAS INSTRUMENTS |
描述: | DUAL LINE TRANSCEIVER, PDSO20 驱动 信息通信管理 光电二极管 接口集成电路 驱动器 |
文件: | 总13页 (文件大小:196K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
DW PACKAGE
(TOP VIEW)
Supports a 9-Pin GeoPort Host Interface
Standard for the Intelligent Network Port
Designed to Operate up to 4-Mbit/s Full
Duplex
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
DA1
GND
V
V
EE
CC
±5 V Supply Operation
NC
NC
DY1
RY3
RB3
RA2
RY2
RB1
RA1
RY1
Provides 6 kV ESD Protection
Has Driver Short-Circuit Protection
SHDN
DZ2
Includes Failsafe Mechanism for Open
Inputs
DY2
GND
DEN
DA2
Is Backward Compatible with AppleTalk
and LocalTalk
Combines Multiple Components into a
Single Chip Solution
Complements the SN75LBC772 9-Pin
GeoPort Peripheral (DCE) Interface Device
logic diagram (positive logic)
Uses LinBiCMOS Process Technology
7
6
DY2
DZ2
10
DA2
description
9
DEN
The SN75LBC771 is a low-power LinBiCMOS
device that incorporates the drivers and receivers
for a 9-pin GeoPort host interface. GeoPort
combines hybrid EIA/TIA-422-B and EIA/
TIA-423-B drivers and receivers to transmit data
up to four-Mbit/s full duplex. GeoPort is a serial
communications standard that is intended to
replace the RS-232, AppleTalk, and printer ports
all in one connector in addition to providing
12
13
RA1
RB1
11
RY1
1
18
15
DY1
RA2
DA1
14
RY2
real-time
data
transfer
capability.
The
SN75LBC771 provides point-to-point connec-
tions between GeoPort-compatible devices with
data transmission rates up to 4-Mbit/s full duplex
featuring a hot-plug capability. Applications
include connection to telephone, ISDN, digital
sound and imaging, fax-data modems, and other
traditional serial and parallel connections. The
GeoPort is backwardly compatible to both
LocalTalk and AppleTalk.
17
RY3
16
RB3
5
SHDN
WhiletheSN75LBC771ispoweredoff(V andV =0),theoutputsareinahigh-impedancestate.Also,when
CC
EE
the shutdown (SHDN) terminal is high, all outputs go into a high-impedance state. A logic high on the driver
enable (DEN) terminal places the outputs of the differential driver into a high-impedance state. All drivers and
receivers have fail-safe mechanisms that ensure a high output state when the inputs are left open.
The SN75LBC771 is characterized for operation over the 0°C to 70°C temperature range.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
GeoPort, LocalTalk, and AppleTalk are trademarks of Apple Computer, Incorporated.
LinBICMOS is a trademark of Texas Instruments Incorporated.
Copyright 1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
†
FUNCTION TABLES
SINGLE-ENDED DRIVER
DIFFERENTIAL DRIVER
OUTPUT
(DY2) (DZ2)
INPUT
(DA1)
ENABLE
(SHDN)
OUTPUT
(DY1)
INPUT
(DA2)
ENABLE
(SHDN) (DEN)
H
L
OPEN
X
X
X
X
L
L
L
L
L
X
X
H
L
L
H
L
Z
Z
Z
Z
H
L
L
L
L
H
L
Z
Z
L
OPEN
X
L
H
OPEN
X
H
Z
Z
Z
Z
H
OPEN
X
H
OPEN
X
SINGLED-ENDED RECEIVER
DIFFERENTIAL RECEIVER
INPUT
(RA2, RA3)
ENABLE
(SHDN)
OUTPUT
(RY2) (RY3)
INPUT
(RA1) (RB1)
ENABLE
(SHDN)
OUTPUT
(RY1)
H
L
L
H
L
L
H
H
?
H
L
L
L
H
L
L
H
L
OPEN
L
L
H
?
OPEN
L
L
H
?
‡
‡
SHORT
SHORT
X
X
H
Z
Z
Z
Z
X
X
X
X
H
Z
Z
OPEN
OPEN
†
‡
H = high level, L = low level, X = irrelevant, ? = indeterminate, Z = high impedance (off)
–0.2 V < V < 0.2 V
ID
§
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Positive supply voltage range, V
Negative supply voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –7 to 0.5 V
Receiver input voltage range (RA, RB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –15 V to 15 V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to 7 V
CC
EE
Receiver differential input voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –12 V to 12 V
ID
Receiver output voltage range (RY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 5.5 V
Driver output voltage range (Power Off) (DY1, DY2, DZ2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –15 V to 15 V
Driver output voltage range (Power On) (DY1, DY2, DZ2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –11 V to 11 V
Driver input voltage range (DA, SHDN, DEN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
Electrostatic Discharge (see Note 2)
+0.4 V
CC
(All pins) Class 3, A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 kV
(All pins) Class 3, B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 V
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
A
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
§
NOTES: 1. All voltage values are with respect to network ground terminal unless otherwise noted.
2. This rating is per MIL-STD-883C, Method 3015.7.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
DISSIPATION RATING TABLE
≤ 25°C DERATING FACTOR
T
A
T = 70°C
A
POWER RATING
PACKAGE
POWER RATING
ABOVE T = 25°C
A
DW
1125 mW
9.0 mW/°C
720 mW
recommended operating conditions
MIN NOM
MAX
UNIT
V
Positive supply voltage, V
4.75
–5.25
2
5
5.25
CC
Negative supply voltage, V
–5 –4.75
V
EE
IH
High-level input voltage, V
Low-level input voltage, V
(DA, SHDN, DEN)
(DA, SHDN, DEN)
V
0.8
7
V
IL
Receiver common-mode input voltage, V
IC
–7
–12
0
V
Receiver differential input voltage, V
ID
12
70
V
Operating free-air temperature, T
°C
A
driver electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
R = 12 kΩ
MIN
3.6
2
TYP
4.5
MAX
UNIT
V
V
V
V
L
V
V
High-level output voltage
OH
R = 120 Ω
L
3.6
Single-ended,
See Figure 1
R = 12 kΩ
L
–4.5
–3.6
–3.6
–2
Low-level output voltage
OL
R
= 120 Ω
L
Magnitude of differential output voltage
|V – V
|V
|
4
V
OD
|
DZ
DY
R
= 120 Ω,
See Figure 2
L
∆|V
|
Change in differential voltage magnitude
Common-mode output voltage
250
2
mV
V
OD
V
OC
–2
Magnitude of change, common-mode
steady-state output voltage
|∆V
|∆V
|
|
200
mV
mV
OC(SS)
See Figure 3
Magnitude of change, common-mode
peak-to-peak output voltage
700
OC(PP)
I
I
I
I
I
Positive supply current
Negative supply current
Positive supply current
Negative supply current
High-impedance output current
4
10
–5
mA
mA
µA
µA
µA
CC
No Load
No Load
SHDN = DEN = 0 V,
SHDN = DEN = 5 V,
–2
EE
CC
EE
OZ
100
–100
±100
V
V
= 0 or 5 V,
= 5.25 V,
–10 ≤ V ≤ 10 V
O
CC
–5 V ≤ V ≤ 5 V,
CC
O
I
Short-circuit output current
±170 ±450
mA
OS
See Note 3
NOTE 3: Not more than one output should be shorted at one time.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
driver switching characteristics over operating free-air temperature range
PARAMETER
TEST CONDITIONS
MIN
TYP
42
41
25
25
28
37
25
23
40
42
25
29
25
35
28
34
37
34
27
26
MAX
75
UNIT
ns
ns
µs
µs
ns
ns
ns
ns
ns
ns
µs
ns
µs
ns
ns
ns
ns
ns
ns
ns
ns
t
t
t
t
t
t
t
t
t
t
Propagation delay time, high-to-low level output
Propagation delay time, low-to-high level output
Driver output enable time to low-level output
Driver output enable time to high-level output
Driver output disable time from low-level output
Driver output disable time from high-level output
Rise time
PHL
PLH
PZL
PZH
PLZ
PHZ
r
75
100
100
100
100
75
Single ended,
See Figure 4
SHDN
10
10
Fall time
75
f
Propagation delay time, high-to-low level output
Propagation delay time, low-to-high level output
75
PHL
PLH
75
SHDN
DEN
100
150
100
150
100
100
100
100
75
t
t
t
t
Driver output enable time to low-level output
Driver output enable time to high-level output
Driver output disable time from low-level output
Driver output disable time from high-level output
PZL
PZH
PLZ
PHZ
SHDN
DEN
Differential,
See Figure 5
SHDN
DEN
SHDN
DEN
t
t
t
Rise time
Fall time
10
10
r
75
f
Pulse skew, |t
– t
|
22
SK(p)
PLH PHL
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
receiver electrical characteristics over recommended operating conditions (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
mV
V
IT+
V
IT–
V
hys
Positive-going input threshold voltage
Negative-going input threshold voltage
200
See Figure 6
–200
mV
Differential input voltage hysteresis (V
– V
)
IT–
50
mV
IT+
V
= 0,
I
I
= –2 mA,
= 2 mA,
IC
See Figure 6
OH
V
High-level output voltage (see Note 4)
2
6
4.5
V
V
OH
OL
V
= 0,
IC
See Figure 6
OL
V
Low-level output voltage
0.4
0.8
V
V
V
= 0
–45
45
–85
85
mA
mA
kΩ
O
I
Short-circuit output current
Input resistance
OS
= 5.25 V
O
R
= 0 or 5.25 V, –12 V ≤ V ≤ 12 V
30
IN
CC
I
NOTE 4: Iftheinputsareleftunconnected, receiversoneandtwointerpretthisasahigh-levelinputandreceiverthreeinterpretsthisasalow-level
input so that all outputs are at the high level.
receiver switching characteristics over recommended conditions (unless otherwise noted)
PARAMETER
Propagation delay time, high-to-low level output
Propagation delay time, low-to-high level output
Rise time
TEST CONDITIONS
MIN
TYP
30
MAX
75
UNIT
ns
t
t
t
t
t
t
t
PHL
PLH
r
30
75
ns
R
= 2 kΩ,
C = 15 pF,
L
L
15
30
ns
See Figure 6
Fall time
15
30
ns
f
Pulse skew |t
t |
PLH- PHL
20
ns
SK(P)
PZL
PZH
Receiver output enable time to low-level output
Receiver output enable time to high-level output
35
35
100
100
ns
ns
Receiver output disable time from low-level
output
Differential
t
t
20
20
100
100
ns
ns
PLZ
PHZ
Receiver output disable time from high-level
output
C
= 50 pF,
See Figure 7
L
t
t
Receiver output enable time to low-level output
Receiver output enable time to high-level output
12
12
25
25
ns
PZL
µs
PZH
Receiver output disable time from low-level
output
Single-ended
t
25
100
400
µs
PLZ
PHZ
Receiver output disable time from high-level
output
t
125
ns
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
PARAMETER MEASUREMENT INFORMATION
C
C
L
L
I
O
R
R
L
L
C
R
L
L
DY2
DZ2
I
I
O
I
DY1
I
I
V
V
O
DA1
DA2
I
O
V
V
V
I
I
O
SHDN
SHDN
or
O
DEN
NOTE A: C = 50 pF
L
Figure 1. Single-Ended Driver DC Parameter Test Circuits
DY2
DZ2
60 Ω
60 Ω
I
I
O
I
V
OD
DA2
V
I
50 pF
SHDN
or
DEN
Figure 2. Differential Driver DC Parameter Test Circuit
DY2
DZ2
60 Ω
60 Ω
V
OD
DA2
V
I
V
OC
15 pF
SHDN
or
DEN
TEST CIRCUIT
3 V
0 V
V
I
1.5 v
1.5 v
V
OC
0 V
V
OC(SS)
V
OC(PP)
VOLTAGE WAVEFORM
NOTE A: Measured 3dB Bandwidth = 300 MHz
Figure 3. Differential Driver Common-Mode Output Voltage Test Circuit
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
PARAMETER MEASUREMENT INFORMATION
C
C
L
L
I
O
R
R
L
L
C
= 50 pF
L
DY2
DZ2
I
I
V
V
O
DY1
DA1
DA2
R
= 120 Ω
L
I
O
V
O
V
I
SHDN
O
SHDN
or
DEN
TEST CIRCUIT
(see Note A)
3 V
0 V
SHDN
or
1.5 V
1.5 V
1.5 V
1.5 V
DEN
3 V
0 V
1.5 V
1.5 V
DA
t
PLH
t
t
t
PZL
t
PHL
PLZ
PHZ
V
OH
90%
90%
90%
DY1, DZ2
10%
90%
0 V
50%
10%
50%
10%
10%
V
OL
t
PZH
t
PLZ
t
f
t
r
t
t
PHL
PHZ
t
PLH
t
PZH
V
OH
DY2
90%
90%
90%
10%
90%
0 V
50%
50%
10%
10%
10%
V
OL
t
t
f
t
r
PZL
VOLTAGE WAVEFORM
(see Note B)
NOTES: A.
C = 50 pF, R = 120 Ω
L L
B. The input waveform t , t ≤ 10 ns.
r f
Figure 4. Single-Ended Driver Propagation and Transition Times Test Circuits and Waveform
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
PARAMETER MEASUREMENT INFORMATION
DY2
DZ2
R
R
= 60 Ω
= 60 Ω
L
L
V
OD
DA2
V
I
50 pF
SHDN
or
DEN
TEST CIRCUIT
3 V
0 V
SHDN
or
DEN
1.5 V
1.5 V
1.5 V
1.5 V
3 V
0 V
1.5 V
1.5 V
DA
t
PHL
t
t
t
t
PLH
PHZ
PZH
PLZ
V
OD(H)
90%
90%
90%
V
OD
50%
10%
10%
50%
10%
0 V
90%
10%
V
OD(L)
t
PZL
t
f
t
r
VOLTAGE WAVEFORM
(see Note A)
NOTE A: For the input waveform t , t < = 10 ns
r f
Figure 5. Differential Driver Propagation and Transition Times Test Circuit and Waveforms
V
CC
2 kΩ
2.5 V
V
0 V
0 V
I
I
I
–2.5 V
RA
RB
I
O
+
_
Input
t
t
RY
PLH
PHL
Output
V
OH
V
I
90%
90%
V
O
V
O
1.5 V
15 pF
10%
10%
V
OL
SHDN
t
r
t
f
TEST CIRCUIT
VOLTAGE WAVEFORM
(see Note A)
NOTE A: For the input waveform t , t < = 10 ns
r f
Figure 6. Receiver Propagation and Transition Times Test Circuit and Waveform
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
PARAMETER MEASUREMENT INFORMATION
V
CC
RA
RB
R
= 500 Ω
+
_
L
–2.5 V or 2.5 V
RY
S1
C
= 50 pF
L
SHDN
TEST CIRCUIT
3 V
0 V
SHDN
1.5 V
1.5 V
90%
t
t
PZL
PLZ
V
CC
S1 at V
CC
10%
90%
V
OL
OH
V
O
t
t
PZH
PHZ
V
S1 at GND
10%
0 V
VOLTAGE WAVEFORM
(see Note A)
NOTE A: For the input waveform t , t < = 10 ns
r f
Figure 7. Receiver Enable and Disable Test Circuit and Waveforms
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
APPLICATION INFORMATION
RxD
TxD
11
13
12
RxD–
GeoPort
Host
SN75LBC771
9-Pin
GeoPort
Peripheral
Device
9-Pin
RxD+
TxD+
7
6
10
5
TxD–
DTE
DCE
GeoPort
SHDN
GND
Controller
DTR
RTXC
CTS
1
RESET/ATT
SCLK
†
18
15
and USART
RESET/ATT
14
17
9
SCLK
Power
TxHS/WAKE-UP
16
RTS
TxHS/WAKE-UP
V
CC
RxD–
RxD+
13
12
Standard
Host
SN75LBC771
9-Pin
19
2
16 TxHS/WAKE-UP
DTE
7
6
TxD+
TxD–
6
7
8
V
CC
V
EE
3
4
1
9
2
5
GND
Power
18
15
RESET/ATT
SCLK
8
20
†
USART = universal synchronous asynchronous receiver transmitter
Figure 8. GeoPort 9-Pin DTE Connection Application
generator characteristics
232/V.28
423/V.10
562
MIN
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
MIN
4
MAX
MAX
Open circuit
3 kΩ ≤ R ≤ 7 kΩ
25
15
6
13.2
V
V
|V
|
Output voltage magnitude
5
NA
3.6
3.7
NA
O
L
R
= 450 Ω
NA
V
L
I
Short-circuit output current
Power-off source resistance
Power-off output current
Output voltage slew rate
V
V
V
= 0
100
150
60
mA
Ω
OS
O
R
= 0,
= 0,
|V | < 2 V
300
NA
NA
300
NA
4
(OFF)
CC
CC
O
I
|V | < 6 V
O
±100
µA
V/µs
µs
O(OFF)
SR
30
NA
NA
NA
30
±3.3 V to ±3.3 V
±3 V to ±3 V
10% to 90%
NA
0.22
NA
NA
2.1
‡
t
t
Output transition time
0.04
ui
ui
‡
NA
NA
0.3
V
Output voltage ring
10%
5%
O(RING)
‡
ui is the unit interval and is the inverse of the signaling rate (bit time).
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
APPLICATION INFORMATION
receiver characteristics
232/V.28
423/V.10
562
MIN
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
MIN
MAX
MAX
25
|V |
I
Input voltage
25
3
10
V
V
|V | < 15 V
–3
NA
3
NA
–0.2
NA
4
–3
NA
3
3
I
V
IT
Input voltage threshold
|V | < 10 V
0.2
V
I
3 V < |V | < 15 V
7
7
kΩ
kΩ
I
R
Input resistance
I
|V | < 10 V
NA
NA
I
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN75LBC771
GEOPORT TRANSCEIVER
SLLS226A – APRIL 1996 – REVISED NOVEMBER 1997
MECHANICAL INFORMATION
DW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
16 PIN SHOWN
PINS **
0.050 (1,27)
16
20
24
28
DIM
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
M
0.410
0.510
0.610
0.710
A MAX
(10,41) (12,95) (15,49) (18,03)
16
9
0.400
0.500
0.600
0.700
A MIN
(10,16) (12,70) (15,24) (17,78)
0.419 (10,65)
0.400 (10,15)
0.010 (0,25) NOM
0.299 (7,59)
0.293 (7,45)
Gage Plane
0.010 (0,25)
1
8
0°–8°
0.050 (1,27)
0.016 (0,40)
A
Seating Plane
0.004 (0,10)
0.012 (0,30)
0.004 (0,10)
0.104 (2,65) MAX
4040000/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-013
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明