SNJ55189FK [TI]
QUADRUPLE LINE RECEIVERS; 翻两番线路接收器
| 型号： | SNJ55189FK |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | QUADRUPLE LINE RECEIVERS |
| 文件： | 总21页 (文件大小：741K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
SN55189, SN55189A . . . J OR W PACKAGE
Input Resistance . . . 3 kΩ to 7 kΩ
MC1489, MC1489A, SN75189, SN75189A
Input Signal Range . . . ±30 V
†
D, N, OR NS PACKAGE
(TOP VIEW)
Operate From Single 5-V Supply
Built-In Input Hysteresis (Double
Thresholds)
1
2
3
4
5
6
7
14
13
12
11
10
9
1A
1CONT
1Y
V
CC
4A
Response Control that Provides:
Input Threshold Shifting
Input Noise Filtering
4CONT
4Y
2A
2CONT
2Y
3A
Meet or Exceed the Requirements of
TIA/EIA-232-F and ITU Recommendation
V.28
3CONT
3Y
8
GND
Fully Interchangeable With Motorola
MC1489 and MC1489A
†
The NS package is only available left-end taped and reeled.
For SN75189, order SN75189NSR.
description
SN55189, SN55189A . . . FK PACKAGE
(TOP VIEW)
These devices are monolithic low-power Schottky
quadruple line receivers designed to satisfy the
requirements of the standard interface between
data-terminal equipment and data-communica-
tion equipment as defined by TIA/EIA-232-F. A
separate response-control (CONT) terminal is
provided for each receiver. A resistor or a resistor
and bias-voltage source can be connected
between this terminal and ground to shift the input
threshold levels. An external capacitor can be
connected between this terminal and ground to
provide input noise filtering.
3
2
1
20 19
18
1Y
NC
4CONT
NC
4
5
6
7
8
17
16
15
14
2A
4Y
NC
NC
2CONT
3A
9 10 11 12 13
The SN55189 and SN55189A are characterized
for operation over the full military temperature
range of –55°C to 125°C. The MC1489,
MC1489A, SN75189, and SN75189A are
characterized for operation from 0°C to 70°C.
NC – No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Motorola is a trademark of Motorola, Incorporated.
Copyright 1998, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
†
logic symbol
1
2
4
1A
1 CONT
3
1Y
THRS ADJ
2A
2 CONT
3A
6
8
2Y
3Y
4Y
5
10
9
13
3 CONT
11
4A
12
4 CONT
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, J, N, NS, and W packages.
logic diagram (positive logic)
A
Y
Response
Control
schematic (each receiver)
V
CC
9 kΩ
5 kΩ
1.66 kΩ
Output Y
R1
Response
Control
4 kΩ
Input A
10 kΩ
GND
MC1489
MC1489A
SN55189 SN55189A
SN75189 SN75189A
R1
8.4 kΩ
1.84 kΩ
Resistor values shown are nominal.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
†
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V
CC
Input voltage, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V
I
Output voltage, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
O
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, T : SN55189, SN55189A . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C
A
MC1489, MC1489A, SN75189, SN75189A . . . . . . 0°C to 70°C
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
Case temperature for 60 seconds, FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or NS package . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
DISSIPATION RATING TABLE
T
≤ 25°C
DERATING FACTOR
T
= 70°C
T = 125°C
A
POWER RATING
A
A
PACKAGE
POWER RATING
ABOVE T = 25°C
POWER RATING
A
D
950 mW
7.6 mW/°C
11.0 mW/°C
11.0 mW/°C
9.2 mW/°C
4.0 mW/°C
8.0 mW/°C
608 mW
N/A
FK
1375 mW
1375 mW
1150 mW
625 mW
880 mW
275 mW
275 mW
N/A
‡
J
880 mW
N
736 mW
NS
W
445 mW
N/A
1000 mW
640 mW
200 mW
‡
In the J package, SN55189 and SN55189A chips are either silver glass or alloy mounted.
recommended operating conditions
MIN NOM
MAX
5.5
25
UNIT
V
Supply voltage, V
4.5
5
CC
Input voltage, V
–25
V
I
High-level output current, I
–0.5
10
mA
mA
°C
OH
Low-level output current, I
OL
Operating free-air temperature, T
0
70
A
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
electrical characteristics over operating free-air temperature range, V
otherwise noted)
= 5 V ± 1% (unless
CC
MC1489, MC1489A
SN75189
SN55189
SN55189A
TEST
FIGURE
†
PARAMETER
TEST CONDITIONS
UNIT
SN75189A
‡
‡
MIN TYP
MAX
MIN TYP
MAX
1.5
T
A
= 25°C
1
1.3
1.9
1.0
1.5
1
1.3
1.9
1.0
’89
T
= 0°C to 70°C
= –55°C to 125°C
= 25°C
0.9
1.6
A
T
A
0.6
1.9
Positive-going input
threshold voltage
V
V
1
V
V
IT+
T
A
1.75
2.25
1.75
1.55
2.25
2.25
’89A
T
= 0°C to 70°C
= –55°C to 125°C
= 25°C
A
T
A
1.30
0.75
2.65
1.25
T
A
0.75
0.65
1.25
1.25
Negative-going input
threshold voltage
1
’89, ’89A
T
A
= 0°C to 70°C
= –55°C to 125°C
IT–
T
A
0.35
2.6
1.6
5
V = 0.75 V,
I
I
I
= –0.5 mA
= –0.5 mA
4
4
2.6
2.6
4
4
5
5
High-level
output voltage
OH
V
V
1
1
2
2
V
V
OH
Input open,
2.6
5
OH
Low-level
output voltage
V = 3 V,
I
I
= 10 mA
0.2
0.45
8.3
0.2
0.45
8.3
OL
OL
V = 25 V
I
3.6
0.43
3.6
0.43
High-level
input current
I
IH
mA
mA
V = 3 V
I
V = –25 V
I
–3.6
–8.3
–3.6
–8.3
Low-level
input current
I
IL
V = –3 V
I
–0.43
–0.43
Short-circuit
output current
I
I
3
2
–3
20
–3
20
mA
mA
OS
Supply current
V = 5 V,
I
Outputs open
26
26
CC
†
‡
All characteristics are measured with the response-control terminal open.
All typical values are at V
= 5 V, T = 25°C.
CC
A
switching characteristics, V
= 5 V, C = 15 pF, T = 25°C
CC
L
A
TEST
FIGURE
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
ns
t
t
t
t
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
Transition time, low- to high-level output
R
R
R
R
= 3.9 kΩ
= 390 Ω
= 3.9 kΩ
= 390 Ω
25
25
85
50
PLH
PHL
TLH
THL
L
L
L
L
4
120
10
175
20
ns
Transition time, high- to low-level output
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
†
PARAMETER MEASUREMENT INFORMATION
V
CC
V , V
IT
1
–I
OH
V
OH
Response
Control
I
OL
V
OL
Open
R
R
C
C
Unless
Otherwise
Specified
C
C
–V
+V
C
C
Figure 1. V
, V
, V
, V
OL
IT+
IT–
OH
V
CC
I
CC (see Note A)
I
IH
V
I
Open
I
IL
Response Control Open
NOTE A: I
is tested for all four receivers simultaneously.
CC
Figure 2. I , I , I
IH IL CC
V
CC
–I
OS
Response
Control
Open
Figure 3. I
OS
†
Arrows indicate actual direction of current flow. Current into a terminal is a positive value.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
PARAMETER MEASUREMENT INFORMATION
V
CC
Output
R
L
Pulse
Generator
(see Note A)
See Note C
= 15 pF
C
L
Response
Control
Open
(see Note B)
TEST CIRCUIT
≤10 ns
≤10 ns
4 V
0 V
90%
50%
90%
50%
Input
10%
10%
t
t
PHL
PLH
V
OH
90%
90%
50%
10%
50%
Output
10%
V
OL
t
t
TLH
THL
VOLTAGE WAVEFORMS
NOTES: A. The pulse generator has the following characteristics: Z = 50 Ω, t = 500 ns.
O
w
B.
C includes probe and jig capacitances.
L
C. All diodes are 1N3064 or equivalent.
Figure 4. Test Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
TYPICAL CHARACTERISTICS
SN65189, SN75189
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
6
5
4
3
2
1
0
R
= 5 kΩ
R
= 13 kΩ
R
= 11 kΩ
C
C
C
C
C
C
R
= ∞
V
= 5 V
C
CC
= 25°C
V
= 5 V
V
= 5 V
V
= – 5 V
T
A
See Figure 1
V
V
V
IT–
V
V
V
IT+
V
V
IT+
IT–
IT+
IT+
IT–
IT–
– 3
–2
– 1
0
1
2
3
4
5
V – Input Voltage – V
I
Figure 5
SN65189A, SN75189A
OUTPUT VOLTAGE
vs
INPUT VOLTAGE
6
5
4
3
2
1
0
R
V
= 5 kΩ
= 5 V
R
V
= 11 kΩ
= – 5 V
V
= 5 V
C
C
C
C
CC
= 25°C
R
= ∞
C
T
A
See Figure 1
V
V
V
IT–
V
IT+
V
IT–
V
IT+
IT–
IT+
– 3
– 2
– 1
0
1
2
3
4
5
V – Input Voltage – V
I
Figure 6
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
†
TYPICAL CHARACTERISTICS
INPUT THRESHOLD VOLTAGE
INPUT THRESHOLD VOLTAGE
vs
FREE-AIR TEMPERATURE
vs
SUPPLY VOLTAGE
2
1.8
1.6
1.4
1.2
1
2.4
2.2
2
’89A V
IT+
’89A V
IT+
’89 V
IT–
1.8
1.6
1.4
1.2
1
’89 V
IT+
’89 V
IT–
IT+
’89A V
IT–
0.8
0.6
0.4
0.2
’89 V
IT–
’89A V
0.8
0.6
0.4
0
–100 –75 –50 –25
0
25 50 75 100 125 150
2
3
4
5
6
7
8
9
10
V
CC
– Supply Voltage – V
T
A
– Free-Air Temperature – °C
Figure 7
Figure 8
SN75189A
NOISE REJECTION
SN75189
NOISE REJECTION
6
5
4
3
2
1
0
6
5
4
3
2
1
0
V
= 5 V
= 25°C
V
= 5 V
= 25°C
CC
CC
T
A
T
A
See Note A
See Note A
C
= 300 pF
= 500 pF
C
C
C
C
= 300 pF
= 500 pF
C
C
C
C
= 12 pF
C
C
= 10 pF
C
= 100 pF
C
C
C
= 100 pF
100
C
10
40
400 1000
4000 10000
10
40
100
400 1000
– Pulse Duration – ns
4000 10000
t
w
– Pulse Duration – ns
t
w
NOTE A: Maximum amplitude of a positive-going pulse that,
starting from 0 V, will not cause a change in the
output level.
NOTE A: Maximum amplitude of a positive-going pulse that,
starting from 0 V, will not cause a change in the
output level.
Figure 9
Figure 10
†
8
Data for free-air temperatures below 0°C and above 70°C are applicable to SN55189 and SN55189A circuits only.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MC1489, MC1489A, SN55189, SN55189A, SN75189, SN75189A
QUADRUPLE LINE RECEIVERS
SLLS095D – SEPTEMBER 1973 – REVISED OCTOBER 1998
TYPICAL CHARACTERISTICS
INPUT CURRENT
vs
INPUT VOLTAGE
10
8
V
= 5 V
CC
Control Open
= 25°C
T
A
6
4
2
0
–2
–4
–6
–8
–10
–25 –20 –15 –10 –5
0
5
10 15 20 25
V – Input Voltage – V
I
Figure 11
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
microcontroller.ti.com
www.ti.com/lpw
Low Power
Wireless
Telephony
www.ti.com/telephony
Video & Imaging
Wireless
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-86888022A
5962-8688802CA
5962-8688802DA
MC1489AN
ACTIVE
ACTIVE
ACTIVE
ACTIVE
FK
J
20
14
14
14
1
1
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
W
N
1
PDIP
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
MC1489ANE4
MC1489N
ACTIVE
ACTIVE
ACTIVE
PDIP
PDIP
PDIP
N
N
N
14
14
14
25
25
25
1
Pb-Free
(RoHS)
Pb-Free
(RoHS)
MC1489NE4
Pb-Free
(RoHS)
SN55189AJ
SN55189J
ACTIVE
OBSOLETE
ACTIVE
CDIP
CDIP
SOIC
J
J
14
14
14
TBD
TBD
A42 SNPB
Call TI
N / A for Pkg Type
Call TI
SN75189AD
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75189ADE4
SN75189ADG4
SN75189ADR
SN75189ADRE4
SN75189ADRG4
SN75189AN
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
D
D
D
D
D
N
N
14
14
14
14
14
14
14
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN75189ANE4
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN75189ANSLE
SN75189ANSR
OBSOLETE
ACTIVE
SO
SO
NS
NS
14
14
TBD
Call TI
Call TI
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75189ANSRG4
SN75189D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SO
NS
D
14
14
14
14
14
14
14
14
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75189DE4
SN75189DG4
SN75189DR
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75189DRE4
SN75189DRG4
SN75189N
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
N
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
Orderable Device
SN75189NE4
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
PDIP
N
14
14
14
14
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
SN75189NSR
SO
SO
SO
NS
NS
NS
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75189NSRE4
SN75189NSRG4
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SNJ55189AFK
SNJ55189AJ
SNJ55189AW
SNJ55189FK
SNJ55189J
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
14
14
20
14
1
1
1
TBD
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
Call TI
N / A for Pkg Type
N / A for Pkg Type
Call TI
ACTIVE
W
FK
J
OBSOLETE
OBSOLETE
LCCC
CDIP
Call TI
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
SN75189ADR
SN75189ANSR
SN75189DR
SOIC
SO
D
NS
D
14
14
14
14
2500
2000
2500
2000
330.0
330.0
330.0
330.0
16.4
16.4
16.4
16.4
6.5
8.2
6.5
8.2
9.0
10.5
9.0
2.1
2.5
2.1
2.5
8.0
12.0
8.0
16.0
16.0
16.0
16.0
Q1
Q1
Q1
Q1
SOIC
SO
SN75189NSR
NS
10.5
12.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN75189ADR
SN75189ANSR
SN75189DR
SOIC
SO
D
NS
D
14
14
14
14
2500
2000
2500
2000
346.0
346.0
346.0
346.0
346.0
346.0
346.0
346.0
33.0
33.0
33.0
33.0
SOIC
SO
SN75189NSR
NS
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明