TLV5617AID [TI]
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN; 2.7 V至5.5 V低功耗双10位数字 - 模拟与电源转换器的降压型号: | TLV5617AID |
厂家: | TEXAS INSTRUMENTS |
描述: | 2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG CONVERTER WITH POWER DOWN |
文件: | 总15页 (文件大小:199K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
features
applications
Dual 10-Bit Voltage Output DAC
Programmable Settling Time
– 2.5 µs in Fast Mode
– 12 µs in Slow Mode
Digital Servo Control Loops
Digital Offset and Gain Adjustment
Industrial Process Control
Machine and Motion Control Devices
Mass Storage Devices
Compatible With TMS320 and SPI Serial
Ports
Differential Nonlinearity <0.2 LSB Typ
Monotonic Over Temperature
D PACKAGE
(TOP VIEW)
description
DIN
SCLK
CS
V
DD
OUTB
REF
1
2
3
4
8
7
6
5
TheTLV5617Aisadual10-bitvoltageoutputDAC
with a flexible 3-wire serial interface. The serial
interface is compatible with TMS320, SPI ,
OUTA
AGND
QSPI , and Microwire
serial ports. It is
programmed with a 16-bit serial string containing
4 control and 10 data bits.
The resistor string output voltage is buffered by an x2 gain rail-to-rail output buffer. The buffer features a
Class-AB output stage to improve stability and reduce settling time. The programmable settling time of the DAC
allows the designer to optimize speed versus power dissipation.
Implemented with a CMOS process, the device is designed for single supply operation from 2.7 V to 5.5 V. It
is available in an 8-pin SOIC package in standard commercial and industrial temperature ranges.
AVAILABLE OPTIONS
PACKAGE
T
A
SOIC
(D)
0°C to 70°C
TLV5617ACD
TLV5617AID
–40°C to 85°C
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
SPI and QSPI are trademarks of Motorola, Inc.
Microwire is a trademark of National Semiconductor Corporation.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
functional block diagram
REF
AGND
V
DD
Power and
Speed Control
Power-On
Reset
2
x2
OUTA
DIN
10-Bit
DAC A
Latch
10
10
SCLK
CS
Serial
Interface
and
10
Buffer
Control
10
10
10-Bit
DAC B
Latch
x2
OUTB
Terminal Functions
TERMINAL
I/O/P
DESCRIPTION
NAME
NO.
5
AGND
CS
P
I
Ground
3
Chip select. Digital input active low, used to enable/disable inputs.
Digital serial data input
DIN
1
I
OUTA
OUTB
REF
4
O
O
I
DAC A analog voltage output
DAC B analog voltage output
Analog reference voltage input
Digital serial clock input
7
6
SCLK
2
I
V
DD
8
P
Positive power supply
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage (V
to AGND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
DD
Reference input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to V
Digital input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to V
+ 0.3 V
+ 0.3 V
DD
DD
Operating free-air temperature range, T : TLV5617AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
A
TLV5617AI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
Storage temperature range, T
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
MIN
4.5
2.7
0.55
2
NOM
MAX
5.5
3.3
2
UNIT
V
V
= 5 V
= 3 V
5
3
V
DD
Supply voltage, V
DD
DD
Power on reset, POR
V
V
High-level digital input voltage, V
V
DD
V
DD
V
DD
V
DD
= 2.7 V to 5.5 V
= 2.7 V to 5.5 V
= 5 V (see Note 1)
= 3 V (see Note 1)
IH
Low-level digital input voltage, V
IL
0.8
V
Reference voltage, V to REF terminal
ref
AGND
AGND
2
2.048
1.024
V
–1.5
–1.5
V
DD
Reference voltage, V to REF terminal
ref
V
V
DD
Load resistance, R
kΩ
pF
MHz
L
Load capacitance, C
100
20
L
Clock frequency, f
CLK
TLV5617AC
TLV5617AI
0
70
Operating free-air temperature, T
°C
A
–40
85
NOTE 1: Due to the x2 output buffer, a reference input voltage ≥ (V –0.4 V)/2 causes clipping of the transfer function.
DD
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
electrical characteristics over recommended operating conditions (unless otherwise noted)
power supply
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
2.5
1
UNIT
mA
µA
Fast
1.7
No load, All inputs = AGND or V
DAC latch = 0x800
,
DD
I
Power supply current
Slow
0.7
1
Power down supply current
Power supply rejection ratio
Zero scale, See Note 2
Full scale, See Note 3
–65
–65
PSRR
dB
NOTES: 2. Power supply rejection ratio at zero scale is measured by varying V
and is given by:
and is given by:
DD
PSRR = 20 log [(E (V max) – E (V min)/V max]
ZS DD ZS DD DD
3. Power supply rejection ratio at full scale is measured by varying V
DD
PSRR = 20 log [(E (V max) – E (V min)/V max]
DD DD DD
G
G
static DAC specifications
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
bits
Resolution
10
INL
Integral nonlinearity
See Note 4
See Note 5
See Note 6
See Note 7
±0.7
±0.1
±1
±1
LSB
DNL
Differential nonlinearity
LSB
E
Zero-scale error (offset error at zero scale)
TC Zero-scale-error temperature coefficient
±12
mV
ZS
ZS
E
10
ppm/°C
% full
scale V
E
Gain error
See Note 8
See Note 9
±0.6
G
E
G
T
Gain-error temperature coefficient
10
ppm/°C
C
NOTES: 4. The relative accuracy of integral nonlinearity (INL), sometimes referred to as linearity error, is the maximum deviation of the output
from the line between zero and full scale, excluding the effects of zero-code and full-scale errors.
5. The differential nonlinearity (DNL), sometimes referred to as differential error, is the difference between the measured and ideal
1-LSB amplitude change of any two adjacent codes.
6. Zero-scale error is the deviation from zero voltage output when the digital input code is zero.
6
7. Zero-scale-error temperature coefficient is given by: E
TC = [E
(T
)
E
(T
)]/2V × 10 /(T
ref max
– T
).
min
ZS
ZS max – ZS min
8. Gain error is the deviation from the ideal output (2V – 1 LSB) with an output load of 10 kΩ.
ref
6
9. Gain temperature coefficient is given by: E
T
[E (T ) E (T
G max – g
)]/2V × 10 /(T
min ref max
– T
).
min
G
C =
output specifications
PARAMETER
TEST CONDITIONS
= 10 kΩ
MIN
TYP
TYP
MAX
–0.4
UNIT
V
V
Output voltage range
R
V
V
O
L
DD
Output load regulation accuracy
V
4.096 V, 2.048 V R = 2 kΩ
±0.29
% FS
O =
L
reference input
PARAMETER
TEST CONDITIONS
MIN
MAX
UNIT
V
V
I
Input voltage range
Input resistance
0
DD–1.5
R
C
10
5
MΩ
pF
I
I
Input capacitance
Fast
1.3
525
–80
MHz
kHz
dB
Reference input bandwidth
Reference feedthrough
REF = 0.2 V + 1.024 V dc
pp
Slow
REF = 1 V at 1 kHz + 1.024 V dc (see Note 10)
pp
NOTE 10: Reference feedthrough is measured at the DAC output with an input code = 0x000.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
electrical characteristics over recommended operating conditions (unless otherwise noted)
(Continued)
digital inputs
PARAMETER
High-level digital input current
TEST CONDITIONS
V = V
MIN
TYP
MAX
UNIT
µA
I
I
1
IH
I
DD
Low-level digital input current
Input capacitance
V = 0 V
I
–1
µA
IL
C
8
pF
i
analog output dynamic performance
PARAMETER
TEST CONDITIONS
MIN
TYP
2.5
12
1
MAX
UNIT
Fast
Slow
Fast
Slow
Fast
Slow
R
= 10 kΩ,
C
C
C
= 100 pF,
= 100 pF,
= 100 pF,
L
L
L
L
t
t
Output settling time, full scale
µs
s(FS)
See Note 11
R
= 10 kΩ,
L
Output settling time, code to code
µs
s(CC)
See Note 12
2
3
R
= 10 kΩ,
L
SR
Slew rate
V/µs
See Note 13
0.5
DIN = 0 to 1,
FCLK = 100 kHz,
Glitch energy
5
nV–s
CS = V
DD
SNR
Signal-to-noise ratio
56
55
SINAD
THD
Signal-to-noise + distortion
Total harmonic distortion
Spurious free dynamic range
f = 102 kSPS,
f
= 1 kHz,
C = 100 pF
L
s
out
dB
R
= 10 kΩ,
–62
64
L
SFDR
NOTES: 11. Settling time is the time for the output signal to remain within ±0.5 LSB of the final measured value for a digital input code change
of 0x020 to 0xFDC and 0xFDC to 0x020 respectively. Not tested, assured by design.
12. Settling time is the time for the output signal to remain within ± 0.5 LSB of the final measured value for a digital input code change
of one count. Not tested, assured by design.
13. Slew rate determines the time it takes for a change of the DAC output from 10% to 90% of full-scale voltage.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
digital input timing requirements
MIN NOM
MAX
UNIT
ns
t
t
t
t
t
t
Setup time, CS low before first negative SCLK edge
10
10
25
25
10
5
su(CS–CK)
su(C16-CS)
wH
th
Setup time, 16 negative SCLK edge before CS rising edge
ns
SCLK pulse width high
ns
SCLK pulse width low
ns
wL
Setup time, data ready before SCLK falling edge
Hold time, data held valid after SCLK falling edge
ns
su(D)
ns
h(D)
timing requirements
t
t
wL
wH
SCLK
DIN
X
X
X
1
2
3
4
5 15
16
t
t
su(D) h(D)
D15
D14
D13
D12
D1
D0
X
t
su(C16-CS)
t
su(CS-CK)
CS
Figure 1. Timing Diagram
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
OUTPUT VOLTAGE
vs
vs
LOAD CURRENT
LOAD CURRENT
2.050
2.048
2.046
2.044
2.042
2.040
2.038
2.036
4.105
4.100
4.095
4.090
4.085
4.080
4.075
4.070
3 V Slow Mode, SOURCE
V
V
=3 V
REF
V
=5 V
DD
DD
=1 V
V
=2 V
REF
5 V Slow Mode, SOURCE
Full scale
Full scale
3 V Fast Mode, SOURCE
5 V Fast Mode, SOURCE
0 –0.01 –0.02 –0.05 –0.10 –0.20 –0.51 –1.02 –2.05
Load Current - mA
0.00 –0.02–0.04–0.10–0.20–0.41–1.02 –2.05–4.10
Load Current - mA
Figure 2
Figure 3
OUTPUT VOLTAGE
vs
LOAD CURRENT
OUTPUT VOLTAGE
vs
LOAD CURRENT
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
V
V
=3 V
REF
V
V
=5 V
REF
DD
DD
=1 V
=2 V
Zero scale
Zero scale
3 V Slow Mode, SINK
5 V Slow Mode, SINK
5 V Fast Mode, SINK
3 V Fast Mode, SINK
0.00 0.01 0.02 0.05 0.10 0.20 0.51 1.02 2.05
Load Current - mA
0.00 0.02 0.04 0.10 0.20 0.41 1.02 2.05 4.09
Load Current - mA
Figure 4
Figure 5
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
V
V
=3 V
REF
DD
=1 V
Full scale
Fast Mode
Fast Mode
V
V
=5 V
REF
DD
=2 V
Full scale
Slow Mode
Slow Mode
–40 –20
0
20
40
60
80
100 120
–40 –20
0
20
40
60
80
100 120
T
A
- Free-Air Temperature - C
T
A
- Free-Air Temperature - C
Figure 6
Figure 7
TOTAL HARMONIC DISTORTION
TOTAL HARMONIC DISTORTION
vs
vs
FREQUENCY
FREQUENCY
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
0
V
= 1 V + 1 V
Sinewave,
V
= 1 V + 1 V
Sinewave,
P/P
REF
P/P
REF
Output Full Scale
–10
Output Full Scale
–20
–30
–40
–50
–60
–70
–80
–90
3 V Slow Mode
3 V Fast Mode
5 V Slow Mode
5 V Fast Mode
1
10
100
1
10
100
f - Frequency - kHz
f - Frequency - kHz
Figure 8
Figure 9
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
INTEGRAL NONLINEARITY ERROR
vs
DIGITAL CODE
3.0
2.5
2.0
1.5
1.0
0.5
0.0
–0.5
–1.0
–1.5
–2.0
–2.5
–3
0
128
256
384
512
640
768
896
1024
Digital Code
Figure 10
DIFFERENTIAL NONLINEARITY ERROR
vs
DIGITAL CODE
0.5
0.4
0.3
0.2
0.1
–0.0
–0.1
–0.2
–0.3
–0.4
–0.5
0
128
256
384
512
640
768
896
1024
Digital Code
Figure 11
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
APPLICATION INFORMATION
general function
The TLV5617A is a dual 10-bit, single-supply DAC, based on a resistor-string architecture. It consists of a serial
interface, a speed and power-down control logic, a resistor string, and a rail-to-rail output buffer.
The output voltage (full scale determined by the reference) is given by:
CODE
2 REF
[V]
0x1000
Where REF is the reference voltage and CODE is the digital input value in the range 0x000 to 0xFFC. A
power-on reset initially puts the internal latches to a defined state (all bits zero).
serial interface
A falling edge of CS starts shifting the data bit-per-bit (starting with the MSB) to the internal register on the falling
edges of SCLK. After 16 bits have been transferred or CS rises, the content of the shift register is moved to the
target latches (DAC A, DAC B, BUFFER, CONTROL), depending on the control bits within the data word.
Figure 12 shows examples of how to connect the TLV5617A to TMS320, SPI , and Microwire .
TMS320
DSP
TLV5617A
CS
DIN
SPI
TLV5617A
CS
DIN
Microwire
I/O
TLV5617A
CS
DIN
FSX
DX
I/O
MOSI
SCK
SO
SK
CLKX
SCLK
SCLK
SCLK
Figure 12. Three-Wire Interface
Notes on SPI and Microwire : Before the controller starts the data transfer, the software has to generate a
falling edge on the pin connected to CS. If the word width is 8 bits (SPI and Microwire ) two write operations
must be performed to program the TLV5617A. After the write operation(s), the holding registers or the control
th
register are updated automatically on the 16 positive clock edge.
serial clock frequency and update rate
The maximum serial clock frequency is given by:
1
f
20 MHz
sclkmax
t
t
wlmin
whmin
The maximum update rate is:
1
f
1.25 MHz
updatemax
16 t
t
wlmin
whmin
Note that the maximum update rate is just a theoretical value for the serial interface, as the settling time of the
TLV5617A should also be considered.
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
APPLICATION INFORMATION
data format
The 16-bit data word for the TLV5617A consists of two parts:
Program bits (D15..D12)
New data
(D11..D0)
D15
R1
D14
D13
D12
R0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
0
D0
0
SPD
PWR
MSB
12 Data bits
LSB
SPD: Speed control bit
PWR: Power control bit
1 → fast mode
1 → power down
0 → slow mode
0 → normal operation
On power up, SPD and PWD are reset to 0 (slow mode and normal operation)
The following table lists all possible combination of register-select bits:
register-select bits
R1
0
R0
0
REGISTER
Write data to DAC B and BUFFER
Write data to BUFFER
0
1
1
0
Write data to DAC A and update DAC B with BUFFER content
Reserved
1
1
The meaning of the 12 data bits depends on the register. If one of the DAC registers or the BUFFER is selected,
then the 12 data bits determine the new DAC value:
examples of operation
Set DAC A output, select fast mode:
Write new DAC A value and update DAC A output:
D15
1
D14
1
D13
0
D12
0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
0
D0
0
New DAC A output value
The DAC A output is updated on the rising clock edge after D0 is sampled.
Set DAC B output, select fast mode:
Write new DAC B value to BUFFER and update DAC B output:
D15
0
D14
1
D13
0
D12
0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
0
D0
0
New BUFFER content and DAC B output value
The DAC A output is updated on the rising clock edge after D0 is sampled.
Set DAC A value, set DAC B value, update both simultaneously, select slow mode:
1. Write data for DAC B to BUFFER:
D15
0
D14
0
D13
0
D12
1
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D2
D1
0
D0
0
New DAC B value
2. Write new DAC A value and update DAC A and B simultaneously:
D15
1
D14
0
D13
0
D12
0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D1
0
D0
0
New DAC A value
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
APPLICATION INFORMATION
examples of operation (continued)
Both outputs are updated on the rising clock edge after D0 from the DAC A data word is sampled.
Set powerdown mode:
D15
X
D14
X
D13
1
D12
X
D11
X
D10
X
D9
X
D8
X
D7
X
D6
X
D5
X
D4
X
D3
X
D2
X
D1
X
D0
X
X = Don’t care
linearity, offset, and gain error using single ended supplies
When an amplifier is operated from a single supply, the voltage offset can still be either positive or negative. With
a positive offset, the output voltage changes on the first code change. With a negative offset, the output voltage
may not change with the first code, depending on the magnitude of the offset voltage.
The output amplifier attempts to drive the output to a negative voltage. However, because the most negative
supply rail is ground, the output cannot drive below ground and clamps the output at 0 V.
The output voltage then remains at zero until the input code value produces a sufficient positive output voltage
to overcome the negative offset voltage, resulting in the transfer function shown in Figure 13.
Output
Voltage
0 V
DAC Code
Negative
Offset
Figure 13. Effect of Negative Offset (Single Supply)
This offset error, not the linearity error, produces this breakpoint. The transfer function would have followed the
dotted line if the output buffer could drive below the ground rail.
For a DAC, linearity is measured between zero-input code (all inputs 0) and full-scale code (all inputs 1) after
offset and full scale are adjusted out or accounted for in some way. However, single supply operation does not
allow for adjustment when the offset is negative due to the breakpoint in the transfer function. So the linearity
is measured between full-scale code and the lowest code that produces a positive output voltage.
definitions of specifications and terminology
integral nonlinearity (INL)
The relative accuracy or integral nonlinearity (INL), sometimes referred to as linearity error, is the maximum
deviation of the output from the line between zero and full scale excluding the effects of zero code and full-scale
errors.
differential nonlinearity (DNL)
The differential nonlinearity (DNL), sometimes referred to as differential error, is the difference between the
measured and ideal 1 LSB amplitude change of any two adjacent codes. Monotonic means the output voltage
changes in the same direction (or remains constant) as a change in the digital input code.
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
definitions of specifications and terminaology (continued)
zero-scale error (E
)
ZS
Zero-scale error is defined as the deviation of the output from 0 V at a digital input value of 0.
gain error (E )
G
Gain error is the error in slope of the DAC transfer function.
total harmonic distortion (THD)
THD is the ratio of the rms value of the first six harmonic components to the value of the fundamental signal.
The value for THD is expressed in decibels.
signal-to-noise ratio + distortion (S/N+D)
S/N+D is the ratio of the rms value of the output signal to the rms sum of all other spectral components below
the Nyquist frequency, including harmonics but excluding dc. The value for S/N+D is expressed in decibels.
spurious free dynamic range (SFDR)
Spurious free dynamic range is the difference between the rms value of the output signal and the rms value of
the largest spurious signal within a specified bandwidth. The value for SFDR is expressed in decibels.
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV5617A
2.7-V TO 5.5-V LOW-POWER DUAL 10-BIT DIGITAL-TO-ANALOG
CONVERTER WITH POWER DOWN
SLAS234B – JULY 1999 – REVISED MARCH 2000
MECHANICAL DATA
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0.050 (1,27)
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
M
14
8
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
0.010 (0,25)
1
7
0°–8°
0.044 (1,12)
0.016 (0,40)
A
Seating Plane
0.004 (0,10)
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
PINS **
8
14
16
DIM
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MAX
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
A MIN
4040047/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
14
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明