TPS61090EVM-029 [TI]
EVALUATION MODULE; 评估模块
| 型号： | TPS61090EVM-029 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | EVALUATION MODULE |
| 文件： | 总18页 (文件大小：224K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢆ
ꢅ
ꢇ
ꢈ
ꢉ
ꢊ
ꢅ
ꢋ
ꢆ
ꢇ
ꢌ
ꢍ
ꢎ
ꢏ
ꢍ
ꢐ
ꢑ
ꢒ
ꢓ
ꢉ
ꢒ
ꢔ
ꢏ
ꢎ
ꢕ
User’s Guide
October 2003
SBVU003
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third−party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products & application
solutions:
Products
Applications
Audio
Amplifiers
amplifier.ti.com
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
Digital Control
Military
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
Logic
interface.ti.com
logic.ti.com
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
microcontroller.ti.com
Telephony
Video & Imaging
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
EVM IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION
PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided
may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective
considerations, including product safety measures typically found in the end product incorporating the goods.
As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic
compatibility and therefore may not meet the technical requirements of the directive.
Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned
within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE
WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user
indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products
received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction
of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic
discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE
TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not
exclusive.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein.
Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM
User’s Guide prior to handling the product. This notice contains important safety information about temperatures
and voltages. For further safety concerns, please contact the TI application engineer.
Persons handling the product must have electronics training and observe good laboratory practice standards.
No license is granted under any patent right or other intellectual property right of TI covering or relating to any
machine, process, or combination in which such TI products or services might be or are used.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the specified input and output ranges described in
the EVM User’s Guide.
Exceeding the specified input range may cause unexpected operation and/or irreversible
damage to the EVM. If there are questions concerning the input range, please contact a TI
field representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or
possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to
connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than
60°C. The EVM is designed to operate properly with certain components above 60°C as long
as the input and output ranges are maintained. These components include but are not limited
to linear regulators, switching transistors, pass transistors, and current sense resistors. These
types of devices can be identified using the EVM schematic located in the EVM User’s Guide.
When placing measurement probes near these devices during operation, please be aware
that these devices may be very warm to the touch.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
Preface
ꢀ ꢁ ꢂ ꢃꢄꢅ ꢆꢇ ꢈ ꢄꢉ ꢇꢊ ꢈꢋ
About This Manual
This user’s guide describes the characteristics, operation, and use of the
TPS61090EVM-029 synchronous boost converter evaluation module (EVM).
This EVM features a Texas Instruments high-efficiency, single-cell Li-Ion,
dual-cell battery boost converter that is configured to deliver 5.0V at 500mA
with an input voltage of 1.8V. This user’s guide includes setup instructions, a
schematic diagram, a bill of materials (BOM), characterization results, and
printed circuit board (PCB) layout drawings for the evaluation module.
How to Use This Manual
This document contains the following chapters:
- Chapter 1—Introduction
- Chapter 2—Setup
- Chapter 3—Board Layout
- Chapter 4—Schematic and Bill of Materials
Related Documentation From Texas Instruments
The following document provides information regarding Texas Instruments
integrated circuits used in the assembly of the TPS61090EVM-029. This
document is available from the TI web site. The last character of the litera-
ture number corresponds to the document revision, which is current at the
time of the writing of this User’s Guide. To obtain a copy of the following TI
document, visit our website at http://www.ti.com/ or call the Texas Instru-
ments Literature Response Center at (800) 477−8924 or the Product Infor-
mation Center at (972) 644−5580. When ordering, identify the document by
both title and literature number.
Data sheet
Literature number
TPS61090 Data Sheet
SLVS484
iii
Contents
If You Need Assistance
If you have questions regarding either the use of this evaluation module or
the information contained in the accompanying documentation, please con-
tact the Texas Instruments Product Information Center at (972) 644−5580,
visit the TI web site at www.ti.com, or contact your local TI sales represen-
tative.
FCC Warning
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can readiate radio frequency energy and has not
been tested for compliance with the limits of computing devices pursuant to
subpart J of part 15 of FCC rules, which are designed to provide reason-
able protection against radio frequency interference. Operation of this
equipment in other environments may cause interface with radio commu-
nications, in which case the user at his own expense will be required to
take whatever measures may be required to correct this interference.
iv
ꢌ ꢍꢎ ꢋꢁ ꢎꢋ ꢈ
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
How to Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Related Documentation From Texas Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
If You Need Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
FCC Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.1
2.2
2.3
Input/Output Connector Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Board Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.1 Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Schematic and Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1
4.2
Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
v
ꢉ ꢇ ꢏꢐ ꢊꢁ ꢈ
Figure 1. Efficiency vs I
for the TPS61090EVM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
OUT
Figure 2. Maximum Output Current vs V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
BAT
Figure 3. Assembly Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Figure 4. Top Layer Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Figure 5. Bottom Layer Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Figure 6. TPS61090EVM-029 Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
ꢅꢂ ꢑ ꢒ ꢁ ꢈ
Table 1. TPS61090EVM-029 Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
vi
Chapter 1
ꢓ
ꢎ
ꢋ
ꢊ
ꢍ
ꢃ
ꢐ
ꢔ
ꢋ
ꢇ
ꢍ
ꢎ
The Texas Instruments TPS61090EVM evaluation board helps designers
evaluate the operation and performance of the TPS61090 family of
high-frequency synchronous boost DC/DC converters.
This EVM is specifically designed and optimized to operate with 2-cell NiCad,
Ni-MH, or alkaline battery input. The default output voltage of this EVM is 5.0V.
If desired, this EVM can easily be modified to supply higher or lower output
voltages by adjusting the appropriate feedback resistor dividers. Also, other
fixed-output voltage versions of the devices can be easily evaluated using this
EVM. Refer to the product data sheet (SLVS484) for the various fixed-output
voltage options available in the TPS6109x device family as well as for more
information on adjusting the output voltage.
1-1
Chapter 2
ꢕꢁ ꢋ ꢐꢖ
This chapter describes the jumpers and connectors on the EVM as well as how
to properly configure, set up, and use the TPS61090EM-029.
Topic
Page
2.1 Input/Output Connector Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
2.2 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
2.3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2-1
Input/Output Connector Descriptions
2.1 Input/Output Connector Descriptions
2.1.1 J1—VBAT
This is the positive connection to the input power supply. The leads to the input
supply should be twisted and kept as short as possible to minimize EMI trans-
mission.
2.1.2 J2—GND
2.1.3 J3—VOUT
This is the return connection for the input power supply.
This is the positive connection from the output of the power supply. Connect
this pin to the positive input of the load.
2.1.4 J4—GND
This is the negative connection from the output of the power supply. Connect
this pin to the negative input of the load.
2.1.5 J5—LBO
2.1.6 J6—GND
2.1.7 JP1—SYNC
The LBO pin is an open-drain output configured with a 1M pull-up resistor.
This is the ground connection for the LBO pin.
This jumper enables or disables the power save mode at light loads. If SYNC
is connected to VBAT, the power save mode is disabled. Connecting SYNC to
GND enables the power save mode. When the SYNC pin is not connected to
VBAT or GND, the switch of the frequency of the device will synchronize to a
user-provided signal of 500kHz to 700kHz.
2.1.8 JP2—EN
2.2 Setup
This jumper enables and disables the TPS61090 on the EVM.
Connect an input supply between J1 and J2. The voltage range on this supply
should stay between 1.8V and 5.0V. Connect a load between J3 and J4. En-
able the output by positioning a jumper to connect the EN and ON pins. Config-
ure the SYNC jumper to the desired setting.
2-2
Operation
2.3 Operation
The EVM has been optimized to operate from a 2-cell NiCad, NiMH, and
alkaline battery with input voltage range down to 1.8V. The output voltage is
set to 5.0V and is capable of supplying 500mA. After connecting the input
and output connections, and setting the SYNC jumper (JP1) to the desired
setting, turn on the input supply and then enable the output as desired with
JP2.
The resistor divider on the LBI pin is designed to trip the LBO output when
the input supply voltage drops below 1.8V.
To reduce the total PCB design area, the inductor used on the EVM is
smaller than the inductor used in characterization curves in the data sheet.
Generally, smaller size inductors decrease the efficiency in the design.
Figure 2−1 shows the efficiency vs I
curve for the TPS61090EVM.
OUT
Figure 2−1. Efficiency vs I
for the TPS61090EVM
OUT
100
90
VIN = 3.3
80
70
VIN = 2.4
60
50
40
30
20
10
0
1
10
100
1000
10000
Output Current (mA)
Figure 2−2 shows the typical maximum output current vs input voltage for this
EVM. The maximum output current of the EVM is slightly less than what is
shown in the data sheet. This difference is because the EVM uses a smaller
value inductor with a smaller footprint to save board area.
Figure 2−2. Maximum Output Current vs V
BAT
2.0
1.5
1.0
0.5
0
1.8
2.2
2.6
3.0
3.4
3.8
4.2
4.6
5.0
Input Voltage, VBAT (V)
Setup
2-3
Chapter 3
ꢗ ꢍꢂ ꢊ ꢃꢘ ꢙ ꢂ ꢚ ꢍ ꢐꢋ
This chapter provides the TPS61090EVM-029 board layout and illustrations.
Topic
Page
3.1 Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3-1
3.1 Layout
Board Layout is critical for all switch mode power supplies. Figure 3−1,
Figure 3−2, and Figure 3−3 show the board layout for the
TPS61090EVM-029 PCB. The nodes with high switching frequencies and
currents are short and isolated from the noise sensitive feedback circuitry.
Careful attention has been given to the routing of high-frequency current
loops. Refer to the data sheet for specific layout guidelines.
Figure 3−1. Assembly Layer
Figure 3−2. Top Layer Routing
3-2
Figure 3−3. Bottom Layer Routing
Board Layout
3-3
Chapter 4
ꢕꢔ ꢆ ꢁ ꢛ ꢂ ꢋꢇ ꢔ ꢂ ꢎꢃ ꢗ ꢇꢒ ꢒ ꢍꢜ ꢝꢂ ꢋ ꢁ ꢊꢇ ꢂꢒ ꢈ
This chapter provides the TPS61090EVM-029 schematic and bill of materi-
als.
Topic
Page
4.1 Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.2 Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
4-1
Schematic
4.1 Schematic
Figure 4−1. TPS61090EVM-029 Schematic
+
+
4-2
Bill of Materials
4.2 Bill of Materials
Table 4−1. TPS61090EVM-029 Bill of Materials
Reference
Designator
Count
Description
Size
805
Manufacturer
Mfg Part Number
1
1
1
C1
C2
C3
Capacitor, Ceramic, 10µF, 6.3V, X5R, 10%
Capacitor, Ceramic, 2.2µF, 10V, X5R, 20%
TDK
TDK
C1608X5R1A105KT
C1005X7R1H472KT
595D107X0016C2T
805
Capacitor, Low ESR Tantalum, 100µF,
16V, 270mΩ, 10%
7343 (D)
Vishay
0
6
2
1
C4
J1 − J6
JP1, JP2
L1
Capacitor, Low ESR Tantalum, xxµF, vvV
Header, 2-pin, 100 mil spacing (36-pin strip)
Header, 3-pin, 100 mil spacing (36-pin strip)
Inductor, SMT, 6.2µH, 2.5A, 27mΩ
7343 (D)
0.100 x 2
0.100 x 3
0.264 sq
Vishay
Sullins
Sullins
Sumida
595D107X0016C2T
PTC36SAAN
PTC36SAAN
CDRH6D38-6R2
1
1
1
1
1
1
R1
R2
R3
R4
R6
U1
Resistor, Chip, 475kΩ, 1/16W, 1%
Resistor, Chip, 182kΩ, 1/16W, 1%
Resistor, Chip, 1.8MΩ, 1/16W, 1%
Resistor, Chip, 200kΩ, 1/16W, 1%
Resistor, Chip, 1.0MΩ, 1/16W, 1%
603
603
Std
Std
Std
Std
Std
Std
Std
603
Std
Std
603
603
Std
IC, Synchronous Boost Converter
with 2A Switch
QFN−16
Texas
Instruments
TPS61090RSA
1
2
−−
−−
PCB, 2.23in x 1.5in x .062in
Shunt, 100 mil (black)
Any
3M
HPA029
0.100
929950−00
Schematic and Bill of Materials
4-3
相关型号：
©2020 ICPDF网 联系我们和版权申明