UC1708JQMLV [TI]
3A 2 CHANNEL, BUF OR INV BASED MOSFET DRIVER, CDIP8, CERAMIC, DIP-8;
| 型号： | UC1708JQMLV |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 3A 2 CHANNEL, BUF OR INV BASED MOSFET DRIVER, CDIP8, CERAMIC, DIP-8 驱动 CD 接口集成电路 驱动器 |
| 文件： | 总18页 (文件大小：1024K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UC1708
UC2708
UC3708
www.ti.com
SLUS171C–MARCH 1997–REVISED SEPTEMBER 2007
DUAL NON-INVERTING POWER DRIVER
1
FEATURES
•
•
•
•
•
•
High-Speed, Power MOSFET Compatible
Efficient High Frequency Operation
Low Cross-Conduction Current Spike
Enable and Shutdown Functions
Wide Input Voltage Range
•
3.0A Peak Current Totem Pole Output
•
•
•
•
5 to 35V Operation
25ns Rise and Fall Times
25ns Propagation Delays
Thermal Shutdown and Under-Voltage
Protection
ESD Protection to 2kV
DESCRIPTION
The UC1708 family of power drivers is made with a high-speed, high-voltage, Schottky process to interface
control functions and high-power switching devices – particularly power MOSFETs. Operating over a 5 V to 35 V
supply range, these devices contain two independent channels. The A and B inputs are compatible with TTL and
CMOS logic families, but can withstand input voltages as high as VIN. Each output can source or sink up to 3 A
as long as power dissipation limits are not exceeded.
Although each output can be activated independently with its own inputs, they can be forced low in common
through the action of either a digital high signal at the Shutdown terminal or by forcing the Enable terminal low.
The Shutdown terminal will only force the outputs low, it will not effect the behavior of the rest of the device. The
Enable terminal effectively places the device in under-voltage lockout, reducing power consumption by as much
as 90%. During under-voltage and disable (Enable terminal forced low) conditions, the outputs are held in a
self-biasing, low-voltage, state.
The UC3708 and UC2708 are available in plastic 8-pin MINI DIP and 16-pin bat-wing DIP packages for
commercial operation over a 0°C to 70°C temperature range and industrial temperature range of –25°C to 85°C
respectively. For operation over a –55°C to 125°C temperature range, the UC1708 is available in hermetically
sealed 8-pin MINI CDIP, 16 pin CDIP and 20 pin CLCC packages. Surface mount devices are also available.
BLOCK DIAGRAM
VIN
5.6 V
Reg
Internal
Bias
Enable
Logic Gnd
Output A
Thermal
Shutdown
Pwr Gnd A
Input A
Output B
Input B
Shutdown
Pwr Gnd B
NOTE: Shutdown feature is not available in J or N packages only.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1997–2007, Texas Instruments Incorporated
UC1708
UC2708
UC3708
www.ti.com
SLUS171C–MARCH 1997–REVISED SEPTEMBER 2007
CONNECTION DIAGRAMS
DIL-8 (Top View)
J Or N Package
SOIC-16 (Top View)
DW Package
Pwr Gnd A
NC
Enable
Input A
NC
Output A
VIN
Input A
Output A
Enable
Gnd
VIN
Logic Gnd
NC
Input B
Output B
NC
NC
VIN
Shutdown
Input B
NC
Output B
Pwr Gnd B
DIL-16 (Top View)
JE Or NE Package
CLCC-20 (Top View)
L Package
NC
Input A
Pwr Gnd A
Output A
VIN
3
2
1
20 19
VIN
NC
NC
18
Enable
ENABLE
4
5
17
16
15
14
LOGIC GND
Logic Gnd
Logic Gnd
Shutdown
Input B
Logic Gnd
NC
NC
6
7
8
Logic Gnd
VIN
NC
VIN
SHUTDOWN
Output B
9
10 11 12 13
NC
Pwr Gnd B
Note: In JE package, Pin 4 is Logic Ground.
Pins 5, 12, and 13 are no connect.
2
Submit Documentation Feedback
Copyright © 1997–2007, Texas Instruments Incorporated
Product Folder Link(s): UC1708 UC2708 UC3708
UC1708
UC2708
UC3708
www.ti.com
SLUS171C–MARCH 1997–REVISED SEPTEMBER 2007
ABSOLUTE MAXIMUM RATINGS(1)
VALUE
UNIT
V
Supply Voltage, VIN
35
Steady-State
0.5
3
A
Output Current (Each Output, Source or Sink)
Peak Transient
A
Ouput Voltage
–0.3 to (VIN + 0.3)
–0.3 to 6.2
–0.3 to (VIN + 0.3)
150
V
Enable and Shutdown Inputs
A and B Inputs
Operating Junction Temperature(2)
Storage Temperature Range
Lead Temperature (Soldering, 10 Seconds)
V
V
°C
°C
°C
–65 to 150
300
(1) All voltages are with respect to Logic Gnd pin. All currents are positive into, negative out of, device terminals.r
(2) Consult Unitrode Integrated Circuits databook for information regarding thermal specifications and limitations of packages.
ELECTRICAL CHARACTERISTICS
Unless otherwise stated, VIN=10V to 35V, and these specifications apply for: –55°C<TA<125°C for the UC1708,
–25°C<TA<85°C for the UC2708, and 0°C<TA<70°C for the UC3708, TA = TJ
PARAMETER
TEST CONDITIONS
Outputs low
MIN
TYP
18
14
1
MAX
26
UNIT
VIN
Supply current
Outputs high
Enable = 0 V
18
mA
4
A, B and shutdown inputs low level
A, B and shutdown inputs high level
A, B Input current low
0.8
V
V
2.0
–1
VA,B = 0.4V
–0.6
mA
A
A, B Input current high
VA,B = 2.4V
–200
50
200
100
500
1.5
200
200
3.6
3.4
2.0
2.5
0.5
2.5
A, B Input leakage current high
Shutdown input current low
VA,B = 35.3V
A
VSHUTDOWN = 0.4V
VSHUTDOWN = 2.4V
VSHUTDOWN = 6.2V
VENABLE = 0V
20
170
A
A
Shutdown input current high
0.6
mA
A
Enable input current low
Enable input current high
Enable threshold rising
Enable threshold falling
–600
1.0
–460
VENABLE = 6.2V
A
2.8
2.4
V
V
VIN
–
IOUT = –50mA
IOUT = –500mA
IOUT = 50mA
IOUT = 500mA
V
Output High Saturation
VOUT
V
V
VOUT
Output Low Saturation
Thermal Shutdown
V
155
°C
Copyright © 1997–2007, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): UC1708 UC2708 UC3708
UC1708
UC2708
UC3708
www.ti.com
SLUS171C–MARCH 1997–REVISED SEPTEMBER 2007
SWITCHING CHARACTERISTICS (see Figure 1)
(VIN = 20V, delays measured to 10% output change.)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
FROM A,B INPUT TO OUTPUT:
CL = 0pF
25
25
25
25
25
55
25
25
40
40
25
25
35
15
25
40
40
45
40
50
45
75
80
50
85
55
40
45
50
20
45
55
ns
ns
UC1708
CL = 1000pF
Rise Time Delay (TPLH)
10% to 90% Rise (TTLH)
UC2708/UC3708
UC1708
CL = 2200pF
CL = 0pF
ns
ns
ns
UC2708/UC3708
UC1708
CL = 1000pF(1)
UC2708/UC3708
UC1708
CL = 2200pF
ns
ns
UC2708/UC3708
CL = 0pF
Fall Time Delay (TPHL)
90% to 10% Fall (TTHL)
CL = 1000pF(1)
CL = 2200pF
CL = 0pF
CL = 1000pF(1)
ns
CL = 2200pF
(1) These parameters, specified at 1000pF, although ensured over recommended operating conditions, are not tested in production.
SWITCHING CHARACTERISTICS (see Figure 1)
(VIN = 20V, delays measured to 10% output change.)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
FROM SHUTDOWN INPUT TO OUTPUT:
CL = 0pF
25
30
30
35
35
50
25
25
40
40
25
30
35
25
25
40
23
38
75
80
75
85
75
75
80
50
85
55
45
50
55
20
45
55
25
45
ns
ns
UC1708
CL = 1000pF(1)
Rise Time Delay (TPLH)
UC2708/UC3708
UC1708
CL = 2200pF
CL = 0pF
ns
ns
ns
UC2708/UC3708
UC1708
CL = 1000pF(1)
10% to 90% Rise (TTLH)
Fall Time Delay (TPHL)
UC2708/UC3708
UC1708
CL = 2200pF
ns
ns
UC2708/UC3708
CL = 0pF
CL = 1000pF(1)
CL = 2200pF
CL = 0pF
90% to 10% Fall (TTHL)
Total Supply Current
CL = 1000pF(1)
ns
CL = 2200pF
F = 200kHz, 50% duty cycle, both channels; CL = 0pF
F = 200kHz, 50% duty cycle, both channels; CL = 2200pF
mA
(1) These parameters, specified at 1000pF, although ensured over recommended operating conditions, are not tested in production.
4
Submit Documentation Feedback
Copyright © 1997–2007, Texas Instruments Incorporated
Product Folder Link(s): UC1708 UC2708 UC3708
UC1708
UC2708
UC3708
www.ti.com
SLUS171C–MARCH 1997–REVISED SEPTEMBER 2007
20 V
4.3 V
INPUT
Input
50%
50%
47 mF
10 mF
0 V
12 V
MPF
6660
20 V
UC1708
90%
10%
90%
AC Input
LH0063
Output
47 W
50 W
OUTPUT
0 V
PWR
GND
10%
50 W
C
L
200 kHz
tr ³0.5 V/RS
tf ³0.5/RS
Duty Cycle - 50%
TP
HL
TP
LH
TT
HL
TT
LH
Logic
Gnd
Figure 1. AC Test Circuit and Switching Time Waveforms
V
Enable
IN
5.6 V
To A/B
Output
8 kW
450 mA
2.5 pF
A/B
Input
Shutdown
5.6 V
Internal
Bias
10 kW
500 W
Under
Voltage
Lockout
10 kW
5.6 V
To A/B
Output
5.6 V
NOTE: Shutdown feature available only in JE, NE or DW Packages.
Figure 2. Equivalent Input Circuits
Copyright © 1997–2007, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): UC1708 UC2708 UC3708
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
5962-0051401Q2A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
5962-
0051401Q2A
UC1708L/
883B
5962-0051401QEA
ACTIVE
CDIP
J
16
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-0051401QE
A
UC1708JE/883B
5962-0051401QPA
5962-0051401V2A
ACTIVE
ACTIVE
CDIP
JG
FK
8
1
1
TBD
TBD
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
0051401QPA
UC1708
LCCC
20
POST-PLATE
5962-
0051401V2A
UC1708L
QMLV
5962-0051401VEA
5962-0051401VPA
ACTIVE
ACTIVE
CDIP
CDIP
J
16
8
1
1
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
5962-0051401VE
A
UC1708JEQMLV
JG
0051401VPA
UC1708
UC1708J
ACTIVE
ACTIVE
CDIP
CDIP
JG
JG
8
8
1
1
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
UC1708J
UC1708J883B
0051401QPA
UC1708
UC1708JE
ACTIVE
ACTIVE
CDIP
CDIP
J
J
16
16
1
1
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
UC1708JE
UC1708JE883B
5962-0051401QE
A
UC1708JE/883B
UC1708L883B
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
5962-
0051401Q2A
UC1708L/
883B
UC2708D
OBSOLETE
ACTIVE
UTR
DW
TBD
Call TI
Call TI
-40 to 85
-40 to 85
UC2708DW
SOIC
SOIC
16
16
40
40
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
UC2708DW
UC2708DW
UC2708DWG4
ACTIVE
DW
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 85
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 85
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
UC2708DWTR
ACTIVE
SOIC
SOIC
DW
16
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
Level-2-260C-1 YEAR
UC2708DW
UC2708DWTRG4
ACTIVE
DW
2000
Green (RoHS
& no Sb/Br)
Level-2-260C-1 YEAR
-40 to 85
UC2708DW
UC2708J
UC2708JE
UC2708N
OBSOLETE
OBSOLETE
ACTIVE
UTR
UTR
P
TBD
TBD
Call TI
Call TI
Call TI
Call TI
-40 to 85
-40 to 85
-40 to 85
PDIP
PDIP
8
8
50
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
UC2708N
UC2708N
UC2708NG4
ACTIVE
P
Green (RoHS
& no Sb/Br)
CU NIPDAU
N / A for Pkg Type
-40 to 85
UC2708Q
OBSOLETE
ACTIVE
UTR
DW
TBD
Call TI
Call TI
-40 to 85
0 to 70
UC3708DW
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
PDIP
PDIP
16
16
16
16
8
40
40
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
UC3708DW
UC3708DW
UC3708DW
UC3708DW
UC3708N
UC3708DWG4
UC3708DWTR
UC3708DWTRG4
UC3708N
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
OBSOLETE
DW
DW
DW
P
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Call TI
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
Call TI
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
2000
2000
50
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
UC3708NE
N
16
16
8
25
Green (RoHS
& no Sb/Br)
UC3708NE
UC3708NE
UC3708N
UC3708NEG4
UC3708NG4
UC3708Q
N
25
Green (RoHS
& no Sb/Br)
P
50
Green (RoHS
& no Sb/Br)
UTR
TBD
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF UC1708, UC1708-SP, UC3708 :
Catalog: UC3708, UC1708
•
Military: UC1708
•
Space: UC1708-SP
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Military - QML certified for Military and Defense Applications
•
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
•
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Jan-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
UC2708DWTR
UC3708DWTR
SOIC
SOIC
DW
DW
16
16
2000
2000
330.0
330.0
16.4
16.4
10.75 10.7
10.75 10.7
2.7
2.7
12.0
12.0
16.0
16.0
Q1
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Jan-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
UC2708DWTR
UC3708DWTR
SOIC
SOIC
DW
DW
16
16
2000
2000
367.0
367.0
367.0
367.0
38.0
38.0
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.063 (1,60)
0.015 (0,38)
0.020 (0,51) MIN
0.200 (5,08) MAX
0.130 (3,30) MIN
Seating Plane
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明