V62/03660-02XE [TI]
QUADRUPLE 2-INPUT POSITIVE-AND GATE; 四路2输入正与门型号: | V62/03660-02XE |
厂家: | TEXAS INSTRUMENTS |
描述: | QUADRUPLE 2-INPUT POSITIVE-AND GATE |
文件: | 总9页 (文件大小:414K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SN74LV08A-EP
QUADRUPLE 2-INPUT POSITIVE-AND GATE
www.ti.com
SCLS481B–MAY 2003–REVISED JANUARY 2006
FEATURES
•
Controlled Baseline
•
Latch-Up Performance Exceeds 250 mA Per
JESD 17
– One Assembly/Test Site, One Fabrication
Site
•
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
•
•
Extended Temperature Performance of
–55°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
– 1000-V Charged-Device Model (C101)
PW PACKAGE
(TOP VIEW)
•
•
•
Enhanced Product-Change Notification
(1)
Qualification Pedigree
1A
1B
V
CC
Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
1
2
3
4
5
6
7
14
13
12
11
4B
4A
4Y
1Y
•
•
•
Typical VOHV (Output VOH Undershoot)
>2.3 V at VCC = 3.3 V, TA = 25°C
2A
2B
10 3B
Supports Mixed-Mode Voltage Operation on
All Ports
9
8
2Y
3A
3Y
GND
Ioff Supports Partial-Power-Down Mode
Operation
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
DESCRIPTION/ORDERING INFORMATION
This quadruple 2-input positive-AND gate is designed for 2-V to 5.5-V VCC operation.
Y = A S B or Y = A + B
The SN74LV08A-EP performs the Boolean function
in positive logic.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE(1)
Tape and reel
Tape and reel
ORDERABLE PART NUMBER
SN74LV08ATPWREP
TOP-SIDE MARKING
LV08AEP
LV08AEP
–40°C to 105°C
–55°C to 125°C
TSSOP – PW
TSSOP – PW
SN74LV08AMPWREP
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
FUNCTION TABLE
(EACH GATE)
INPUTS
OUTPUT
Y
A
H
L
B
H
X
L
H
L
L
X
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2003–2006, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
SN74LV08A-EP
QUADRUPLE 2-INPUT POSITIVE-AND GATE
www.ti.com
SCLS481B–MAY 2003–REVISED JANUARY 2006
LOGIC DIAGRAM, EACH GATE (POSITIVE LOGIC)
A
B
Y
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
–0.5
MAX
UNIT
VCC
VI
Supply voltage range
Input voltage range(2)
Voltage range applied to any output in the high-impedance or power-off state(2)
Output voltage range(2)(3)
7
V
7
7
V
V
VO
VO
IIK
VCC + 0.5
–20
V
Input clamp current
VI < 0
mA
mA
mA
mA
°C/W
°C
IOK
IO
Output clamp current
VO < 0
–50
Continuous output current
Continuous current through VCC or GND
Package thermal impedance(4)
Storage temperature range
VO = 0 to VCC
±25
±50
θJA
113
Tstg
–65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 5.5 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2
SN74LV08A-EP
QUADRUPLE 2-INPUT POSITIVE-AND GATE
www.ti.com
SCLS481B–MAY 2003–REVISED JANUARY 2006
Recommended Operating Conditions(1)
MIN
2
MAX
UNIT
VCC
Supply voltage
5.5
V
VCC = 2 V
1.5
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 2 V
V
V
V
CC × 0.7
CC × 0.7
CC × 0.7
VIH
High-level input voltage
V
V
0.5
CC × 0.3
CC × 0.3
CC × 0.3
5.5
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
V
V
V
VIL
Low-level input voltage
VI
Input voltage
0
0
V
V
VO
Output voltage
VCC
–50
–2
VCC = 2 V
µA
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 2 V
IOH
High-level output current
Low-level output current
–6
mA
µA
–12
50
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
SN74LV08AM
2
IOL
6
mA
12
200
100
20
∆t/∆v
Input transition rise or fall rate
Operating free-air temperature
ns/V
–55
–40
125
105
TA
°C
SN74LV08AT
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implication of Slow or Floating CMOS Inputs, literature number SCBA004.
Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCC
2 V to 5.5 V
2.3 V
MIN
VCC – 0.1
2
TYP
MAX UNIT
IOH = –50 µA
IOH = –2 mA
VOH
V
IOH = –6 mA
3 V
2.48
IOH = –12 mA
IOL = 50 µA
4.5 V
3.8
2 V to 5.5 V
2.3 V
0.1
IOL = 2 mA
0.4
V
VOL
IOL = 6 mA
3 V
0.44
IOL = 12 mA
4.5 V
0.55
II
VI = 5.5 V or GND
VI = VCC or GND,
VI or VO = 0 to 5.5 V
0 to 5.5 V
5.5 V
±1
20
5
µA
µA
µA
ICC
Ioff
IO = 0
0
3.3 V
3.3
3.3
Ci
VI = VCC or GND
pF
5 V
3
SN74LV08A-EP
QUADRUPLE 2-INPUT POSITIVE-AND GATE
www.ti.com
SCLS481B–MAY 2003–REVISED JANUARY 2006
Switching Characteristics
over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
TA = 25°C
TYP
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN
MAX UNIT
16 ns
MIN
MAX
tpd
A or B
Y
CL = 50 pF
7.5
12.3
1
Switching Characteristics
over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
TA = 25°C
TYP
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN
MAX UNIT
12 ns
MIN
MAX
tpd
A or B
Y
CL = 50 pF
5.5
7.9
1
Noise Characteristics(1)
VCC = 3.3 V, CL = 50 pF, TA = 25°C
MIN
TYP
0.2
MAX UNIT
VOL(P) Quiet output, maximum dynamic VOL
VOL(V) Quiet output, minimum dynamic VOL
VOH(V) Quiet output, minimum dynamic VOH
VIH(D) High-level dynamic input voltage
0.8
V
V
V
V
V
–0.1
3.1
–0.8
2.31
VIL(D)
Low-level dynamic input voltage
0.99
(1) Characteristics are for surface-mount packages only.
Operating Characteristics
TA = 25°C
PARAMETER
TEST CONDITIONS
CL = 50 pF, f = 10 MHz
VCC
3.3 V
5 V
TYP
UNIT
8
Cpd
Power dissipation capacitance
pF
10
4
SN74LV08A-EP
QUADRUPLE 2-INPUT POSITIVE-AND GATE
www.ti.com
SCLS481B–MAY 2003–REVISED JANUARY 2006
PARAMETER MEASUREMENT INFORMATION
V
CC
S1
Open
R = 1 kΩ
L
TEST
/t
S1
From Output
Under Test
Test
Point
From Output
Under Test
GND
t
t
Open
PLH PHL
C
L
C
L
t
/t
V
CC
PLZ PZL
(see Note A)
(see Note A)
/t
GND
PHZ PZH
Open Drain
V
CC
LOAD CIRCUIT FOR
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
3-STATE AND OPEN-DRAIN OUTPUTS
V
CC
50% V
CC
Timing Input
0 V
t
w
t
h
t
su
V
CC
V
CC
50% V
50% V
CC
Input
Input
CC
50% V
50% V
CC
Data Input
0 V
CC
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
V
V
CC
CC
Output
Control
50% V
50% V
50% V
50% V
t
CC
CC
CC
CC
0 V
0 V
t
t
t
t
PZL
PLZ
PLH
PHL
Output
Waveform 1
≈V
V
CC
OH
In-Phase
Output
50% V
50% V
CC
50% V
CC
CC
V
+ 0.3 V
− 0.3 V
OL
S1 at V
CC
V
OL
V
OL
(see Note B)
t
t
t
PHL
PLH
PHZ
PZH
Output
Waveform 2
S1 at GND
V
V
OH
OH
OL
Out-of-Phase
Output
V
OH
50% V
50% V
50% V
CC
CC
CC
V
≈0 V
(see Note B)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 3 ns, t ≤ 3 ns.
O
r
f
D. The outputs are measured one at a time, with one input transition per measurement.
E.
F.
G.
t
t
t
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PHL
PHZ
are the same as t
PZH
en
are the same as t .
PLH pd
H. All parameters and waveforms are not applicable to all devices.
Figure 1. Load Circuits and Voltage Waveforms
5
PACKAGE OPTION ADDENDUM
www.ti.com
18-Sep-2008
PACKAGING INFORMATION
Orderable Device
SN74LV08AMPWREP
SN74LV08ATPWREP
V62/03660-01XE
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
TSSOP
PW
14
14
14
14
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
PW
PW
PW
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
V62/03660-02XE
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74LV08A-EP :
Catalog: SN74LV08A
Automotive: SN74LV08A-Q1
•
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•
•
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74LV08AMPWREP
SN74LV08ATPWREP
TSSOP
TSSOP
PW
PW
14
14
2000
2000
330.0
330.0
12.4
12.4
6.9
6.9
5.6
5.6
1.6
1.6
8.0
8.0
12.0
12.0
Q1
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74LV08AMPWREP
SN74LV08ATPWREP
TSSOP
TSSOP
PW
PW
14
14
2000
2000
367.0
367.0
367.0
367.0
35.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明