XC9235A146DR [TOREX]
Analog Circuit;型号: | XC9235A146DR |
厂家: | Torex Semiconductor |
描述: | Analog Circuit |
文件: | 总7页 (文件大小:237K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
☆GO-Compatible
Preliminary
◆Synchronous Step-Down DC/DC Converters
■APPLICATIONS
◆High Efficiency
◆Low Ripple
: 92%
●Mobile phones (PDC, GSM, CDMA, IMT2000 etc.)
●Bluetooth equipment
: 10mV
◆Output Current
◆Oscillation Frequency
: 600mA
: 600kHz,
1.2MHz, 3.0MHz
●PDAs, Portable communication modem
●Portable games
●Cameras, Digital cameras
●Cordless phones
●Notebook computers
◆PWM Fixed Control
:
:
:
(XC9235 series)
(XC9236 series)
(XC9237 series)
◆
◆
PWM/PFM Automatic Switching Control
Manual Selection of Switching Control
◆Maximum Duty Ratio
: 100%
◆Ceramic Capacitor Compatible
◆Ultra Small Packages
: SOT-25, USP-6C
■GENERAL DESCRIPTION
■FEATURES
The
XC9235/9236/9237
series
is
a
group
of
P-Ch Driver Tr. Built-In
N-Ch Synchronous Driver
Tr. built-in
: ON resistance 0.42Ω
: ON resistance 0.52Ω
synchronous-rectification type DC/DC converters with a
built-in 0.42 Ω P-channel driver transistor and 0.52 Ω
N-channel switching transistor, designed to allow the use of
ceramic capacitors. The ICs enable a high efficiency, stable
power supply with an output current of 600mA to be
configured using only a coil and two capacitors connected
externally. Operating voltage range is from 1.8V to 6.0V.
Output voltage is internally programmable in a range from
0.8V to 4.0V in increments of 50mV <accuracy: ±1.5%(±
2.0%)>. With the built-in oscillator, oscillation frequency is
selectable from 600kHz, 1.2MHz, and 3.0MHz to make
available the frequency best suited to your particular
application. As for operation mode, the XC9235 series is
PWM control, the XC9236 series is automatic PWM/PFM
switching control and the XC9237 series can be manually
switched between the PWM control mode and the automatic
PWM/PFM switching control mode, allowing fast response,
low ripple and high efficiency over the full range of load (from
light load to high output current conditions).
Input Voltage Range
Output Voltage Range
: 1.8V~6.0V
: 0.8V~4.0V
(50mV increments)
: 92% (TYP.)
High Efficiency
Output Current
: 600mA
Oscillation Frequency
: 600kHz, 1.2MHz, 3.0MHz
(Fixed frequency accuracy ±15%)
: SOT-25 (SOT-23-5), USP-6C
Packages
Soft-Start Circuit Built-In
Current Limiter Circuit Built-In (Constant Current & Latching)
Low ESR Ceramic Capacitor Compatible
* Performance depends on external components
and wiring on the PCB.
The soft start and current control functions are internally
optimized. During standby, all circuits are shutdown to
reduce current consumption to as low as 1.0μA or less.
With the built-in U.V.L.O. (Under Voltage Lock Out) function,
the internal P-channel driver transistor is forced OFF when
input voltage becomes 1.4V or lower.
Two types of
package, SOT-25 (250mW) and USP-6C (100mW), are
available.
■TYPICAL PERFORMANCE
CHARACTERISTICS
●Efficiency vs. Output Current
■TYPICAL APPLICATION CIRCUIT
(VIN=4.2V, VOUT=1.8V)
100
PWM/PFM Automatic Switching Control
90
3.0MHz
80
70
60
50
40
30
20
10
0
L: 1.5uH (NR3015)
CL: 10uF (ceramic)
CIN: 4.7uF (ceramic)
3.0MHz
PWM Control
3.0MHz
1.2MHz
1.2MHz
1.2MHz
L: 4.7uH (NR3015)
CL: 10uF (ceramic)
CIN: 4.7uF (ceramic)
3MHz PFM
1.2MHz PFM
3MHz PWM
1.2MHz PWM
0.1
1
10
100
1000
Output Current:IOUT(mA)
1/7
XC9235_36_37 ETR_0514_001
XC9235/9236/9237 Series
■PIN CONFIGURATION
Lx
5
VOUT
4
VIN 6
1 Lx
VSS 5
2 VSS
3 VOUT
CE/MODE 4
3
1
2
VIN
VSS CE/MODE
USP-6C
SOT-25 (TOP VIEW)
(BOTTOM VIEW)
* Please short the VSS pin (pin no. 2 and 5).
* The dissipation pad for the USP-6C package should
be solder-plated in recommended mount pattern and
metal masking so as to enhance mounting strength
and heat release. If the pad needs to be connected
to other pins, it should be connected to the VSS pin.
(pin no. 5).
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTION
SOT-25
USP-6B
1
2
3
4
5
6
2, 5
4
3
1
VIN
VSS
CE / MODE
VOUT
Power Input
Ground
Chip Enable Mode Switch
Output Voltage Sense
Switching Output
Lx
■PRODUCT CLASSIFICATION
●Ordering Information
XC9235①②③④⑤⑥
XC9236①②③④⑤⑥
XC9237①②③④⑤⑥
PWM fixed control
PWM / PFM automatic switching control
PWM fixed controlQPWM / PFM automatic switching, manual switching
DESIGNATOR
DESCRIPTION
SYMBOL
DESCRIPTION
Transistor built-in,
Output voltage internally
set (VOUT product),
①
②
③
A
: CE input logic High Active
Soft-start internally set
Current limit: 900mA
: Integer number of output voltage
Output Voltage
0~4
e.g. VOUT=2.8V→②=2
: Decimal number of output voltage
50mV increments: 05=A, 15=B, 25=C, 35=D, 45=E, 55=F, 65=H, 75=K,
0~9,
A~M
Output Voltage
85=L, 95=M
e.g. VOUT=2.8V→②=2, ③=8
VOUT=2.85V→②=2, ③=L
600kHz
6
C
D
M
D
R
L
④
Oscillation Frequency
1.2MHz
3.0MHz
SOT-25 (SOT-23-5)
USP-6C
⑤
⑥
Package
Embossed tape, standard feed
Embossed tape, reverse feed
Device Orientation
2/7
XC9235/9236/9237
Series
■PACKAGING INFORMATION
●SOT-25 (SOT-23-5)
●USP-6C
3/7
XC9235/9236/9237 Series
■BLOCK DIAGRAM
Phase
Compensation
Current Feedback
Current Limit
VOUT
R2
R1
PWM
Comparator
Error Amp.
Synch.
Buffer
Drive
Logic
Lx
VIN
Vrefw ith
PWM/PFM
Selector
Soft Start,
CE
Ramp Wave
Generator
OSC
U.V.L.O. Cmp
U.V.L.O.
R3
R4
VSS
CE/MODE
Control Logic
CE/MODE
NOTE: The signal from CE/MODE Control Logic to PWM/PFM Selector is being fixed to "L" level inside,
and XC9235 series chooses only PWM control.
The signal from CE/MODE Control Logic to PWM/PFM Selector is being fixed to "H" level inside,
and XC9236 series chooses only PWM/PFM automatic switching control.
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
UNITS
PARAMETER
VIN Pin Voltage
SYMBOL
VIN
RATINGS
- 0.3 ~ 6.5
- 0.3 ~ VIN + 0.3 or 6.5V
- 0.3 ~ 6.5
V
V
V
V
mA
Lx Pin Voltage
VLx
VOUT Pin Voltage
CE / MODE Pin Voltage
Lx Pin Current
VOUT
VCE
ILx
- 0.3 ~ 6.5
±1200
SOT-25
USP-6C
600 *
1100 *
Power Dissipation
Pd
mW
Operating Temperature Range
Storage Temperature Range
* When mounted on the PC board.
Topr
Tstg
- 40 ~ + 85
- 55 ~ +125
℃
℃
4/7
XC9235/9236/9237
Series
■ELECTRICAL CHARACTERISTICS
XC9237A18Cxx
VOUT=1.8V, FOSC=1.2MHz, Ta=25℃
PARAMETER
SYMBOL
VOUT
CONDITIONS
MIN.
TYP.
MAX.
UNIT CIRCUIT
When connected to external components,
CE=VIN, IOUT=30mA
Output Voltage
1.764 1.800 1.836
V
V
Operating Voltage Range
Maximum Output Current
VIN
-
1.8
-
-
6.0
-
VIN=VOUT + 1.5V,
IOUTMAX
600
mA
When connected to external components
CE=VIN, VOUT=0V, Voltage which Lx pin
voltage holding "L" level
VIN=CE=3.6V, VOUT=set voltage×1.1V
VIN=3.6V, CE=0V,
U.V.L.O. Voltage
Supply Current
Stand-by Current
VUVLO
IDD
1.00
1.40
15
0
1.78
-
V
-
-
μA
μA
Istb
1.0
VOUT=set voltage×1.1V
When connected to external components,
IOUT=100mA
When connected to external components,
CE=VIN, IOUT=1mA
Oscillation Frequency
FOSC
1020
-
1200
160
1380
-
kHz
mA
PFM Switch Current
Maximum IPFM Limit
IPFM
MAXIPFM
-
100
-
200
-
-
-
-
0
%
%
%
Maximum Duty Ratio MAXDTY CE=VIN, VOUT=0V
Minimum Duty Ratio
MINDTY CE=VOUT=VIN
When connected to external components,
CE=VIN=3.0V, IOUT=100mA
Efficiency
EFFI
-
92
-
%
Lx SW “H” ON Resistance
Lx SW “L” ON Resistance
Lx SW “H” Leak Current
Lx SW “L” Leak Current
Current Limit
RLxH
RLxL
ILeakH
ILeakL
ILIM
CE=0.5VIN, VOUT=0V, ILx=100mA
CE=0.5VIN, ILx=100mA
VIN=VOUT=5.0V, CE=0V, Lx=0V
VIN=VOUT=5.0V, CE=0V, Lx=5.0V
VIN=CE=5.0V, VOUT=setting voltage x 0.9V
-
-
-
-
-
0.42
0.52
0.01
0.01
900
-
-
Ω
Ω
1.0
1.0
-
μA
μA
mA
Output Voltage
Temperature Characteristics
△
V
OUT
IOUT=30mA, -40℃≦Topr≦85℃
-
±100
-
ppm/ ℃
VOUT・△topr
VOUT=0V, When CE voltage is applied Lx
determine "H"
VOUT=0V, When CE voltage is applied Lx
determine "L"
CE “H” Voltage
CE “L” Voltage
VCEH
VCEL
0.65
VSS
-
-
VIN
0.25
V
V
PWM “H” Level Voltage
PWM “L” Level Voltage
CE “H” Current
VPWMH
VPWML
ICEH
-
-
-
-
-
VIN - 1.0
-
0.1
V
V
μA
μA
VIN - 0.3
- 0.1
- 0.1
CE “L” Current
ICEL
0.1
When connected to external components,
CE=0V → VIN, IOUT=1mA
VIN=CE=5.0V, VOUT=Setting Voltage x
0.9V, Short Lx by 1Ω resistance
Soft-Start Time
Latch Time
TSS
Tlat
-
1.0
-
-
msec
msec
1.0
20.0
The ratio to the output voltage becomes a
VSHORT threshold voltage
ex.) When VOUT=1.8V, VSHORT=0.9V (TYP.)
Short Protection
Threshold Voltage
-
50
-
%
5/7
XC9235/9236/9237 Series
■ELECTRICAL CHARACTERISTICS (Continued)
XC9237A 18Dxx
VOUT=1.8V, FOSC=3.0MHz, Ta=25℃
MIN. TYP. MAX. UNIT CIRCUIT
PARAMETER
SYMBOL
VOUT
CONDITIONS
When connected to external components,
CE=VIN, IOUT=30mA
Output Voltage
1.764 1.800 1.836
V
V
①
①
①
Operating Voltage Range
Maximum Output Current
VIN
1.8
-
-
6.0
-
VIN=VOUT+1.5V, when connected to external
components
IOUTMAX
600
mA
CE=VIN, VOUT=0V, Voltage which Lx
Pin voltage holding "L" level
VIN=CE=3.6V, VOUT=set voltagex1.1V
VIN=3.6V, CE=0V,
U.V.L.O. Voltage
Supply Current
Stand-by Current
VUVLO
IDD
1.00
1.40
30
0
1.78
-
V
②
③
③
-
-
μA
μA
Istb
1.0
VOUT=set voltage×1.1V
When connected to external components,
IOUT=100mA
When connected to external components,
CE=VIN, IOUT=1mA
Oscillation Frequency
PFM Switch Current
FOSC
IPFM
2550
-
3000
220
3450
-
kHz
mA
①
①
Maximum IPFM Current MAXIPFM
Maximum Duty Ratio MAXDTY CE=VIN, VOUT=0V
-
100
-
200
-
-
-
-
0
%
%
%
①
④
④
Minimum Duty Ratio
MINDTY CE=VOUT=VIN
When connected to external components,
Efficiency (*2)
EFFI
-
92
-
%
①
CE=VIN=3.0V, IOUT=100mA
CE=0.5VIN, VOUT=0V, ILx=100mA
CE=0.5VIN, ILx=100mA
VIN=VOUT=5.0V, CE=0V, Lx=0V
VIN=VOUT=5.0V, CE=0V, Lx=5.0V
VIN=CE=5.0V, VOUT=setting voltage x 0.9V
IOUT=30mA,
Lx SW “H” ON Resistance
Lx SW “L” ON Resistance
Lx SW “H” Leak Current
Lx SW “L” Leak Current
Current Limit
RLxH
RLxL
ILeakH
ILeakL
ILIM
-
-
-
0.5
0.5
0.01
0.01
900
-
-
Ω
Ω
⑤
⑤
⑥
⑥
⑦
1.0
1.0
-
μA
μA
mA
-
Output Voltage
△VOUT
+100
ppm/ ℃
①
⑧
⑧
Temperature Characteristics VOUT・△topr -40℃≦Topr≦85℃
VOUT=0V, When CE voltage is applied Lx
determine "H"
VOUT=0V, When CE voltage is applied Lx
determine "L"
CE “H” Voltage
CE “L” Voltage
VCEH
VCEL
0.65
VSS
VIN
V
V
0.25
PWM “H” Level Voltage
PWM “L” Level Voltage
CE “H” Current
VPWMH
VPWML
ICEH
-
-
-
-
-
VIN-1.0
-
0.1
V
V
μA
μA
①
①
⑧
⑧
VIN-0.3
- 0.1
- 0.1
CE “L” Current
ICEL
0.1
When connected to external components,
CE=0V→VIN, IOUT=1mA
VIN=CE=5.0V, VOUT=Setting Voltage x 0.9V,
Short Lx by 1Ω resistance
Soft-Start Time
Latch Time
TSS
Tlat
-
1.0
-
-
msec
msec
①
⑨
1.0
20.0
The ratio to the output voltage becomes
VSHORT a threshold voltage
ex.) When VOUT=1.8V, VSHORT=0.9V (TYP.)
Short Protection
Threshold Voltage
-
50
-
%
⑨
6/7
XC9235/9236/9237
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics. Consult us, or our representatives
before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with such
equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this catalog may be copied or reproduced without the
prior permission of Torex Semiconductor Ltd.
7/7
相关型号:
XC9235A14CMR
600mA Driver Tr. Built-In, Synchronous Step-Down DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A15CER-G
Switching Regulator/Controller, Current-mode, 0.6A, 1380kHz Switching Freq-Max, PDSO6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A15CMR
600mA Driver Tr. Built-In, Synchronous Step-Down DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A15CMR-G
Switching Regulator/Controller, Current-mode, 0.6A, 1380kHz Switching Freq-Max, PDSO5Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A15DER-G
Switching Regulator/Controller, Current-mode, 0.6A, 3450kHz Switching Freq-Max, PDSO6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A15DMR-G
Switching Regulator/Controller, Current-mode, 0.6A, 3450kHz Switching Freq-Max, PDSO5Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A16CDL
Analog CircuitWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A16CMR
600mA Driver Tr. Built-In, Synchronous Step-Down DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A176MR
Analog CircuitWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A18CER-G
Switching Regulator/Controller, Current-mode, 0.6A, 1380kHz Switching Freq-Max, PDSO6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A18CMR-G
Switching Regulator/Controller, Current-mode, 0.6A, 1380kHz Switching Freq-Max, PDSO5Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
XC9235A18DER-G
Switching Regulator/Controller, Current-mode, 0.6A, 3450kHz Switching Freq-Max, PDSO6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOREX
©2020 ICPDF网 联系我们和版权申明