2SK2845(2-7B5B) [TOSHIBA]

TRANSISTOR 1 A, 900 V, 9 ohm, N-CHANNEL, Si, POWER, MOSFET, LEAD FREE, 2-7B5B, SC-64, 3 PIN, FET General Purpose Power;
2SK2845(2-7B5B)
型号: 2SK2845(2-7B5B)
厂家: TOSHIBA    TOSHIBA
描述:

TRANSISTOR 1 A, 900 V, 9 ohm, N-CHANNEL, Si, POWER, MOSFET, LEAD FREE, 2-7B5B, SC-64, 3 PIN, FET General Purpose Power

开关 脉冲 晶体管
文件: 总6页 (文件大小:398K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
2SK2845  
TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (π−MOSIII)  
2SK2845  
Unit: mm  
Chopper Regulator, DC/DC Converter and Motor Drive  
6.8 MAX.  
Applications  
5.2 ± 0.2  
0.6 MAX.  
z Low drain-source ON-resistance  
z High forward transfer admittance  
: R  
= 8.0 (typ.)  
DS (ON)  
: |Y | = 0.9 S (typ.)  
fs  
z Low leakage current : I  
= 100 μA (max) (V  
= 720 V)  
DSS  
DS  
z Enhancement mode : V = 2.0 to 4.0 V (V  
= 10 V, I = 1 mA)  
D
th  
DS  
0.95 MAX.  
0.6 ± 0.15  
Absolute Maximum Ratings (Ta = 25°C)  
0.6 MAX.  
Characteristic  
Drain-source voltage  
Symbol  
Rating  
Unit  
2.3 2.3  
V
900  
900  
±30  
1
V
V
V
DSS  
Drain-gate voltage (R  
Gate-source voltage  
= 20 k)  
V
GS  
DGR  
1
2
3
2
V
GSS  
1. GATE  
2. DRAIN  
HEAT SINK)  
3. SOURSE  
1
DC (Note 1)  
I
D
Drain current  
A
3
Pulse (Note 1)  
I
3
DP  
Drain power dissipation (Tc = 25°C)  
Single-pulse avalanche energy  
P
40  
W
D
AS  
AR  
JEDEC  
JEITA  
SC-64  
2-7B5B  
E
324  
mJ  
(Note 2)  
TOSHIBA  
Avalanche current  
I
1
4.0  
A
Weight: 0.36 g (typ.)  
Repetitive avalanche energy (Note 3)  
Channel temperature  
E
mJ  
°C  
°C  
AR  
T
T
150  
ch  
6.8 MAX.  
5.2 ± 0.2  
Storage temperature range  
55 to 150  
0.6 MAX.  
stg  
Note: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the  
reliability significantly even if the operating conditions (i.e. operating  
temperature/current/voltage, etc.) are within the absolute maximum  
ratings. Please design the appropriate reliability upon reviewing the  
Toshiba Semiconductor Reliability Handbook (“Handling  
Precautions”/“Derating Concept and Methods”) and individual  
reliability data (i.e. reliability test report and estimated failure rate,  
etc).  
0.6 ± 0.15  
0.95 MAX.  
0.6 ± 0.15  
0.6 MAX.  
2.3  
2.3  
1
2
3
2.3 2.3  
Thermal Characteristics  
2
3
1. GATE  
2. DRAIN  
HEAT SINK)  
3. SOURSE  
1
Characteristic  
Symbol  
Max  
Unit  
Thermal resistance, channel to case  
Thermal resistance, channel to ambient  
R
3.125  
125  
°C / W  
°C / W  
th (chc)  
R
th (cha)  
JEDEC  
JEITA  
Note 1: Ensure that the channel temperature does not exceed 150°C.  
Note 2: = 90 V, T = 25°C (initial), L = 594 mH, R = 25 , I  
V
DD  
= 1 A  
AR  
ch  
G
TOSHIBA  
2-7B7B  
Note 3: Repetitive rating: pulse width limited by maximum channel  
temperature  
Weight: 0.36 g (typ.)  
This transistor is an electrostatic-sensitive device. Handle with care.  
1
2009-07-13  
2SK2845  
Electrical Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
= ±30 V, V = 0 V  
Min  
Typ.  
Max  
Unit  
Gate leakage current  
I
V
±30  
±10  
μA  
V
GSS  
GS  
DS  
Gate-source breakdown voltage  
V
V
I
= ±10 μA, V = 0 V  
G DS  
(BR) GSS  
Drain cutoff current  
I
V
= 720 V, V  
= 0 V  
100  
μA  
V
DSS  
DS  
GS  
Drain-source breakdown voltage  
I
= 10 mA, V  
= 0 V  
900  
2.0  
(BR) DSS  
D
GS  
= 10 V, I = 1 mA  
Gate threshold voltage  
Drain-source ON-resistance  
Forward transfer admittance  
Input capacitance  
V
V
V
V
4.0  
9.0  
V
th  
DS  
GS  
DS  
D
R
= 10 V, I = 0.5 A  
8.0  
0.9  
350  
8
DS (ON)  
|Y |  
D
= 20 V, I = 0.5 A  
0.45  
S
fs  
D
C
C
iss  
V
= 25 V, V  
= 0 V, f = 1 MHz  
GS  
pF  
Reverse transfer capacitance  
Output capacitance  
DS  
rss  
C
40  
oss  
Rise time  
t
20  
70  
30  
r
Turn-on time  
Switching time  
t
on  
ns  
Fall time  
t
f
Turn-off time  
t
95  
15  
off  
Total gate charge (gate-source  
plus gate-drain)  
Q
g
V
400 V, V  
= 10 V, I = 1 A  
nC  
DD  
GS  
D
Gate-source charge  
Q
6
9
gs  
Gate-drain (“Miller”) charge  
Q
gd  
Source-Drain Ratings and Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
Min  
Typ.  
Max  
1
Unit  
A
Continuous drain reverse current  
(Note 1)  
I
DR  
Pulse drain reverse current  
(Note 1)  
I
3
A
DRP  
Forward voltage (diode)  
Reverse recovery time  
Reverse recovery charge  
V
I
I
= 1 A, V  
= 1 A, V  
= 0 V  
750  
3
1.9  
V
DSF  
DR  
DR  
GS  
GS  
t
ns  
μC  
rr  
= 0 VdI  
/ dt = 100 A / μs  
DR  
Q
rr  
Marking  
Note 4 : A line under a Lot No. identifies the indication of product Labels  
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]  
K2845  
Part No.  
Please contact your TOSHIBA sales representative for details as to  
environmental matters such as the RoHS compatibility of Product.  
The RoHS is Directive 2002/95/EC of the European Parliament and  
of the Council of 27 January 2003 on the restriction of the use of certain  
hazardous substances in electrical and electronic equipment.  
(or abbreviation code)  
Lot No.  
Note 4  
2
2009-07-13  
2SK2845  
3
2009-07-13  
2SK2845  
4
2009-07-13  
2SK2845  
R
V
= 25 Ω  
G
1
2
B
VDSS  
E
=
L I2 ⋅  
AS  
= 90 V, L = 594 mH  
DD  
B
V  
DD  
VDSS  
5
2009-07-13  
2SK2845  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must  
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,  
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA  
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are  
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the  
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any  
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other  
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO  
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
6
2009-07-13  

相关型号:

2SK2845(2-7B7B)

TRANSISTOR 1 A, 900 V, 9 ohm, N-CHANNEL, Si, POWER, MOSFET, LEAD FREE, 2-7B7B, SC-64, 3 PIN, FET General Purpose Power
TOSHIBA

2SK2845(SM)

TRANSISTOR,MOSFET,N-CHANNEL,900V V(BR)DSS,1A I(D),TO-251AA
TOSHIBA

2SK2845(TE16L1,Q)

MOSFET N-CH 900V 1A SC-64
TOSHIBA

2SK2845B2B

2SK2845B2B
TOSHIBA

2SK2845_06

Silicon N-Channel MOS Type Chopper Regulator, DC/DC Converter and Motor Drive Applications
TOSHIBA

2SK2845_09

Chopper Regulator, DC/DC Converter and Motor Drive Applications
TOSHIBA

2SK2846

N CHANNEL MOS TYPE (HIGH SPEED, HIGH CURRENT SWITCHING, CHOPPER REGULATOR, DC-DC CONVERTERAND MOTOR DRIVE APPLICATIONS)
TOSHIBA

2SK2846(TP)

TRANSISTOR,MOSFET,N-CHANNEL,600V V(BR)DSS,2A I(D),TO-221
TOSHIBA

2SK2846(TP,F)

TRANSISTOR,MOSFET,N-CHANNEL,600V V(BR)DSS,2A I(D),TO-221
TOSHIBA

2SK2846(TP,Q)

2SK2846(TP,Q)
TOSHIBA

2SK2846_06

Silicon N Channel MOS Type Chopper Regulator, DC−DC Converter and Motor Drive Applications
TOSHIBA

2SK2846_09

Chopper Regulator, DC−DC Converter and Motor Drive
TOSHIBA