DF2S24FS(TL3PSE,E) [TOSHIBA]

Zener Diode, 24V V(Z), 5.79%, Silicon, Unidirectional;


型号：	DF2S24FS(TL3PSE,E)
厂家：	TOSHIBA
描述：	Zener Diode, 24V V(Z), 5.79%, Silicon, Unidirectional
文件：	总7页 (文件大小：166K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DF2S24FS

ESD Protection Diodes Silicon Epitaxial Planar

DF2S24FS

1. Applications

•

ESD Protection

Note: This product is designed for protection against electrostatic discharge (ESD) and is not intended for any other

purpose, including, but not limited to, voltage regulation.

2. Packaging and Internal Circuit

1: Cathode

2: Anode

SOD-923

1: Cathode

2: Anode

fSC

The SOD-923 package is recommended.

Package

Product name

SOD-923

fSC

DF2S24FS,L3M (Note 1)

DF2S24FS,L3J , DF2S24FS,L3F

Note 1: The product name of the devices housed in the SOD-923 package are suffixed with

the "M".

Start of commercial production

2013-12

2014-07-18

Rev.3.0

DF2S24FS

3. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25)

Characteristics

Symbol

Rating

Unit

Electrostatic discharge voltage (IEC61000-4-2)(Contact)

Junction temperature

VESD

±10

150



Storage temperature

Tstg

-55 to 150

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

4. Electrical Characteristics (Unless otherwise specified, Ta = 25)

VRWM: Working peak reverse

voltage

VZ: Zener voltage

VBR: Reverse breakdown voltage

ZZ: Dynamic impedance

IZ: Zener current

IBR: Reverse breakdown current

IR: Reverse current

VC: Clamp voltage

IPP: Peak pulse current

RDYN: Dynamic resistance

IF: Forward current

VF: Forward voltage

Fig. 4.1 Definitions of Electrical Characteristics

Characteristics

Symbol

Note

Test Condition

Min

Typ.

Max

Unit

Working peak reverse voltage

VRWM



Zener voltage

(Reverse breakdown voltage)

(VBR)

IZ = 5 mA

(IBR)

22.8

24.0

25.6

Dynamic impedance

IZ = 5 mA

(IBR)



Ω

Reverse current

VRWM = 19 V



0.5

µA

Total capacitance

VR = 0 V, f = 1 MHz

8.5



2014-07-18

Rev.3.0

DF2S24FS

5. Guaranteed ESD Protection (Note)

Test Condition

ESD Protection

IEC61000-4-2 (Contact discharge)

Note: Criterion: No damage to devices.

±10 kV

6. Marking

Fig. 6.1 Marking

7. Land Pattern Dimensions (for reference only)

Fig. 7.1 SOD-923 (unit: mm)

Fig. 7.2 fSC (unit: mm)

2014-07-18

Rev.3.0

DF2S24FS

8. Characteristics Curves (Note)

Fig. 8.1 IZ - VZ (IBR - VBR)

Fig. 8.2 IR - VR

Fig. 8.3 Ct - VR

Note: The above characteristics curves are presented for reference only and not guaranteed by production test,

unless otherwise noted.

2014-07-18

Rev.3.0

DF2S24FS

Package Dimensions

Unit: mm

The shapes and dimensions of the package vary, depending on the manufacturing plant. For details, contact the

Toshiba sales representative.

Weight: 0.55 mg (typ.)

Package Name(s)

TOSHIBA: 1-1AH1A

Nickname: SOD-923

2014-07-18

Rev.3.0

DF2S24FS

Package Dimensions

Unit: mm

The shapes and dimensions of the package vary, depending on the manufacturing plant. For details, contact the

Toshiba sales representative.

Weight: 0.6 mg (typ.)

Package Name(s)

TOSHIBA: 1-1L1S

Nickname: fSC

2014-07-18

Rev.3.0

DF2S24FS

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's

written permission, reproduction is permissible only if reproduction is without alteration/omission.

ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible

for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which

minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage

to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate

the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA

information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the

precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application

with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,

including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating

and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample

application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.

TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

•

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY

CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,

equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,

trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,

elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any

intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products

(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and

regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration

Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all

applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2014-07-18

Rev.3.0

相关型号：